Roll off trailer

MÜLLER-MITTELTAL 18 t.Außenroller Container Anhänger, 2 in 1

Condition: used, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low-bed trailer ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Bent drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye) * GHD height adjustment device instead of drawbar spring ----Electrical system / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector ----General components: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Spare wheel holder on the right side * Reflective contour marking tape on the sides and rear * Side impact protection * Plastic quarter fenders with splash guard * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frame for guiding roll-off containers * Sheet steel floor with recesses for roll-off containers in the bogie area * Continuous length of 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welding bead as an anti-slip coating in the track area of the ramp * Mechanical support legs at the rear ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the front wall support * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes in cloverleaf design on each side * 4 x 8-ton lashing brackets recessed in the outer frame Crjdpfxszihcis Acfed ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * Drawbar, axles, air tank painted in a black tone ----Information: * Vehicle has full manufacturer's warranty until 03/2027 * Errors and prior sale are subject to change * The trailer is in new condition and has only been used a maximum of 5 times ----Delivery time: * Available for immediate delivery from Egestorf, near the A7 motorway

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Brake system: * EBS electronic braking system * Emergency release device for spring brake cylinders Credpfx Acol Tq Nmsfjd * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lower system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable-height coupling ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General accessories: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Container net storage box made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable A-sign at the rear ----Loading platform: * Main frame with raised outer rails for guiding roll containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp lock as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the slope area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the side in the outer frame * Each side: 4 x 2 t cloverleaf-type lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking components, rear drop supports hot-dip galvanized * Drawbar, axles, and air tanks painted in black tone ----Info: * New vehicle without initial registration, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 43 / 2026

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lifting and lowering system, including RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underride protection * Plastic quarter mudguards with spray protection * Plastic rear bumper buffers * Foldable A-sign at rear ----Loading Platform: * Main frame with raised outer frame for guiding roll-off containers * Steel plate floor with recessed roller tracks in the bogie area * Cont. length from 5,500 – 7,000 mm possible * Pneumatic 4-point locking clamps and mechanical removable stops at the front in the running track, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the ramp run-up area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front wall support * 3 pairs of 10 t UVV lashing rings on the sides of the outer frame * 4 x 2 t lashing eyes per side, cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame Crodpfx Acol Tpc Ajfod ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle, unregistered, with full manufacturer's warranty * Subject to errors and prior sale * Sample photos ----Delivery time: * Available approx. from week 43 / 2026