Used Müller-Mitteltal Open Flatbed Trailers for sale (257)

Condition: new, maximum load weight: 6,870 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange coupling: * Drawbar with 40 mm screwed coupling (height-adjustable, in mm) ----Electrical system / Lighting: * 15-pole power connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General components: * Front support jack * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Closed steel sheet fenders with splash guards * Closed side impact protection, usable as an advertising space * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping mechanism to secure the drum at the end of the support arms, and a locking mechanism for the cable drum superstructure with the chassis by means of a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed control and brake for drum drive Cedju I Iqljpfx Aafori * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsionally rigid square tubes and cross members ----Pump - Unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange drawbar: Csdpfx Aou I Iqxoaferi * Drawbar with 40 mm threaded drawbar coupling (height-adjustable in mm) ----Electrical system / Lighting: * 15-pole power plug * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General components: * Front support jack * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed mudguards made of sheet steel with splash protection * Closed side impact protection, can be used as an advertising space * Plastic tool box with base insert (horizontal installation) approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping device to secure the drum at the ends of the support arms, and a locking mechanism for the cable drum superstructure with the chassis using a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Painting: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system * Emergency release device for spring accumulator cylinders * Drum brakes * 3 x 11 tons BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the side and at the rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - black powder-coated - on the side, under the chassis * 15-pole power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via tension spring and locking mechanism * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing points (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable * Loadable in all directions and recessed in the corners of the outer frame, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards under the loading area, stored in a storage compartment * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing points on the side in the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding check valves, hydraulic lateral ramp adjustment Crodpoq Dyv Iofx Aafji * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm access slope) * Loading height when loaded: approx. 860 mm +/- 30 mm, leveling system * Chassis, turntable, folding outriggers, rear supports and access ramps hot-dip galvanized. * Axles, springs, drawbar, air tank, etc. painted in black. * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Delivery from approx. week 50/2026

Condition: used, Year of construction: 2013, Various containers for Müller-Mitteltal CHK: - 7 pcs. 4.5 - 5 m³, unit price €1,000 - 3 pcs. 8 m³, unit price €2,000 All containers are in operational condition. Years of manufacture: 2013 - 2015. = Further information = Country of manufacture: DE Codpfoxb N A Iex Aafori For more information, please contact Jan-Marc Schwickert.

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: Credpfx Aaol Tpc Aofei * 2 in 1 = suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment device ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED rear lights 12 / 24 V * 15-pin power socket ----General components: * Toolbox made of powder-coated steel sheet, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash protection * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading area: * Main frame with raised outer frame for guiding the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamping locking system and mech. plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welding bead as anti-slip coating in the track area of the ramp * Mech. rear support legs ----Load securing: * 1 pair of 10 ton UVV lashing rings at the front on the front wall beam * 3 pairs of 10 ton UVV lashing rings on the sides in the outer frame * 4 x 2 ton lashing eyes on each side in a cloverleaf design * 4 x 8 ton lashing brackets recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * Drawbar, axles, air tanks painted in a black shade ----Information: * New vehicle without initial registration with full manufacturer warranty * Errors and prior sale subject to change * Sample images ----Delivery time: * Available from approximately week 43 / 2026

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Csdpov S H Sfefx Aafori - .

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment Crsdpfxol Th Ade Aafei * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 9,850 mm, total width: 2,550 mm, total height: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, container locking mechanism, U-shaped protection, pneumatically adjustable drawbar, lateral aluminum side protection, twin tires, storage compartment, removable side boards. Wheelbase: 5400 mm, Body: Trailer for roll-off containers with lengths of 6m-6.75m, SAF axle type SKRZ 11030, pneumatic hook lowering system, 2x receiving pocket for pluggable locking hooks, 4x pockets for pluggable container centering and bin stop. The trailer can also be used as a flatbed! Aluminum side boards with a height of 600 mm are included with the trailer! Loading ramps available for an additional charge of €900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Csdpfji Rpxwox Aafori

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, RS-T 18.0 / 018: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes ----Axles: * 2 x 10-ton SAF axles ----Suspension: * Air suspension with automatic lowering when the brake is released ----Drawbar: * Drawbar, 2,300 mm long, with 40 mm drawbar eye and height adjustment via tension spring & spindle ----Electrical system / Lighting: * TPMS (tire pressure monitoring system) * LED tail lights with protective cover * 2 x 7-pole power connectors ----General components: * Plastic toolbox on the right side, closed plastic fenders * Side, closed underrun protection as an advertising space * Underrun protection with 2 impact buffers * Folding A-sign at the rear for waste disposal ----Container running surface: * Roller track length approx. 6,950 mm * Roll container secured by pneumatic 4-point claw locking system * At the front, there are 2 plug-in container stops with 2 additional plug-in positions * Suitable for container lengths of 5,000 - 7,000 mm Cedpfel Tqkwex Aafsri ----Riding height: * Unladen approx. 1,165 mm ----Painting: * Chassis hot-dip galvanized * Air tank, axles, swivel bearing and drawbar ----Information: * --Technically, a permissible total weight of 20,000 kg is possible-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, RS-T 18.0 / 018: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes ----Axles: * 2 x 10-ton SAF axles ----Suspension: * Air suspension with automatic lowering when the brake is released ----Drawbar: * Drawbar, 2,300 mm long, with 40 mm drawbar eye and height adjustment via spring and spindle ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * LED taillights with protective cover * 2 x 7-pin electrical connectors ----General Components: * Plastic toolbox on the right side, closed plastic fender * Closed side impact guard as an advertising surface * Underrun protection with 2 impact buffers * Foldable A-sign at the rear for waste disposal ----Container Running Surface: * Roller track length approx. 6,950 mm * Roller container is secured by pneumatic 4-point claw locking system * At the front, there are 2 pluggable container stops with 2 additional plug-in positions * Suitable for container lengths of 5,000 - 7,000 mm ----Ride Height: * Unladen approx. 1,165 mm ----Paint Finish: * Chassis hot-dip galvanized * Air tank, axles, slewing ring and drawbar Crjdol Tpy Hjpfx Aafji ----Information: * --A technically feasible gross vehicle weight of 20,000 kg-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar ---- Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing gear at the front * External folding support legs at the rear * Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on chassis - loading height + 20 mm * 50 mm softwood floor in clamped design * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist * Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers ---- Ramps: * One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart) * Rear ramp slope approx. 860 mm ---- Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 Crodpfx Aaepk D D Hofsi ---- Paintwork: * Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Side wall paintwork in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ---- Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ---- Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: Cedpeq Hg Dxofx Aafori * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter fenders * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipping bridge: * Net hooks on the side and rear in the bearings of the central locking system, as well as 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with sideboard spring lifters * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, embedded in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and track vehicles * Lockable storage compartment at the rear under the loading area, embedded in the chassis ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and support winch painted in a black tone * Sideboard painted in RAL 9010 pure white * Painting of the side walls in a RAL color against extra charge * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 45/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: Codpfx Ajv D Tbksafjri * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar, height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each on the left and right side * Lateral impact protection * Underrun protection * Plastic quarter fenders ----Loading area: * 400 mm high bolted front bulkhead * 50 mm hardwood flooring * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load securing: * Perforated outer frame, bent at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * 1 x 6.3-ton lashing point in each corner, front and rear (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading area from the rear ----Painting: * ---Chassis, drawbar, front bulkhead, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from week 39/2026

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system * Emergency release device for spring accumulator cylinders * Drum brakes * 3 x 11 tons BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the side and at the rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - black powder-coated - on the side, under the chassis * 15-pole power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via tension spring and locking mechanism * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing points (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable * Loadable in all directions and recessed in the corners of the outer frame, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards under the loading area, stored in a storage compartment * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing points on the side in the excavator arm rest) Cedpotplwfefx Aaferi * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding check valves, hydraulic lateral ramp adjustment * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm access slope) * Loading height when loaded: approx. 860 mm +/- 30 mm, leveling system * Chassis, turntable, folding outriggers, rear supports and access ramps hot-dip galvanized. * Axles, springs, drawbar, air tank, etc. painted in black. * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Delivery from approx. week 50/2026

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem low-loader with many extras: Equipment: 2 spring-loaded supports for 400mm high steel side walls Reinforced and certified superstructure according to EN 12642 XL, including cargo securing certificate 10 UVV lashing eyes in the existing hole pattern in the outer frame Additional wooden floor in a clamped design Tires 235/75R17.5 4 BPW axles instead of GIGANT Platform extension by 870 mm to 6,270 mm Ramps in one piece with hot-dip galvanized grating in a non-slip design Crodpexcxmfsfx Aafji Lockable tool box with a payload of 45 kg Paint: Wheels silver Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized Axles/springs black Side walls RAL2011 traffic orange We would be happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of new equipment in stock and equipment available for demonstration. Please contact us! We rent out vehicles with and without drivers and machinery. A large number of used machines and equipment are constantly available. Subject to technical changes, errors, and prior sale.

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash guards * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as an anti-slip surface in the track area of the ramp * Mechanical rear support legs ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall beam * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes each on the sides in a cloverleaf design * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: Crjdel Tq Nmepfx Aafoi * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, and air tank are painted in a black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approximately from week 43 / 2026

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brake system: Csdpfxel Thy Ro Aafsri * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic leaf springs with equalizing aggregate ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General attachments: * Jost mechanical support landing gear at the front * Rear external foldable support legs, hot-dip galvanized * Side underrun protection * Plastic quarter mudguards * Plastic toolbox mounted front-right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading area: * 50 mm softwood floor * 20" container locks fitted at front and rear * Front bulkhead bolted, made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist * Rear stanchions, hot-dip galvanized and bolted ----Load securing: * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings) * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles * Rear stowage compartment beneath the loading platform, integrated in the chassis ----Paint/Coating: * Chassis, drawbar, front and rear bulkheads hot-dip galvanized * Side board color RAL 9010 pure white * Sides can be painted in any RAL color at extra cost ----Additional information: * New vehicle without registration * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic Crjdpfx Aaol Tilxofoi * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3-in-1: suitable for roll-on/roll-off containers, skip loaders, and as a low-bed trailer ----Brakes: Cedpfx Ajl Tnwzjafsri * EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm drawbar eye and height adjustment ----Electrical System / Lighting: * TPMS (tire pressure monitoring system), display option in the truck via EBS signal (without truck-side installation) * LED rear lights 12 / 24 V * 15-pole electrical connector ----General Components: * Toolbox made of powder-coated sheet steel * Spare wheel holder in a box design on the right side * Closed side underrun protection * Plastic quarter fenders with splash protection * Plastic rear impact protection buffer * Folding A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frames for guiding the roll containers * Steel sheet floor with recesses for the rollers in the bogie area * When transporting roll-on/roll-off containers, a continuous length of 5,500 - 7,000 mm is possible * Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track * Transport of up to 2 skip loaders with a maximum volume of 10 m³ is possible * 8 repositionable bin stops for lateral centering of the bins, front 4 bin stops locked with pivoting stops * Weld bead as an anti-slip surface in the track area of the ramp * Mechanical support legs at the rear ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning elements for positive and frictional securing of the bins, 4 lashing straps in a cloverleaf design (on the sides) * 1 pair of 13.4-ton UVV lashing rings at the front * 4 x 8-ton lashing eyes embedded on each side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Reflective contour striping on the sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Technically possible gross vehicle weight of 20,000 kg-- * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egstorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: Crodpfx Ael Tld Ioafei * 3-in-1: Suitable for roll-off containers, demountable containers, and as a low-bed trailer. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with a 40 mm drawbar eye and height adjustment device ----Electrical System / Lighting: * TPMS (tire pressure monitoring system), display option in the truck via EBS signal (without truck-side installation) * LED tail lights, 12 / 24 V * 15-pin power socket ----General Components: * Toolbox made of powder-coated sheet steel * Spare wheel holder in the body design, on the right side * Closed side underrun protection * Plastic quarter fenders with splash guard * Plastic impact protection buffer at the rear * Folding A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frames for guiding the roll-off containers * Sheet steel floor with recesses for the rollers in the bogie area * When transporting roll-off containers, a continuous length of 5,500 - 7,000 mm is possible * Pneumatic 4-point clamping lock, as well as mechanically pluggable stop angles at the front in the track * Transport of up to 2 demountable containers with a maximum volume of 10 m³ is possible * Includes 8 repositionable container stops for lateral centering of the containers, front 4 container stops plugged in with pivoting stops * Weld bead as an anti-slip surface in the track area of the access ramp * Mechanical support legs at the rear ----Load Securing: * 3 pairs of 10-ton certified lashing rings on the sides for attaching tensioning elements for form-fitting and force-locking securing of the containers, 4 lashing straps each in a cloverleaf design (on the sides) * 1 pair of 13.4-ton certified lashing rings at the front * 4 x 8-ton lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum access ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Reflective contour tape on the sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available from Egstorf

Condition: new, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 9 ton Gigant axles ----Suspension: * Air suspension with leveling during tipping ----Electrical System / Lighting: * Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation - * 15-pin power socket * LED lighting with galvanized protective roof * 2 LED reversing lights ----Fifth Wheel Coupling / Drawbar: * Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate) ----General Components: * Front support jack * Foldable, galvanized steel under-run protection for paver loading * Closed plastic individual fenders * Front panel platform made of grating with a step on the drawbar and handrails on the front panel ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: Crjdpfex Ipbyex Aafji * Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift * Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor ----Covering Tarpaulin: * Covering tarpaulin - agate gray, similar to RAL 7038 - * Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear ----Painting: * Chassis, under-run protection, front panel and drawbar hot-dip galvanized * Axles, air tank, support jack, fifth wheel coupling painted in a black tone * Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons. * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: Cjdpfx Aael Th Nnefori * Drawbar with 50 mm drawbar eye and height adjustment via coil spring and tension lock ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front fender made of molded plastic and rear fender made of straight, galvanized steel sheet, each with splash protection * Toolbox made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control unit for retrofitting the hydraulic side ramp adjustment ----Loading Area: * Above the slewing ring: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach ramp) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical front support legs * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm at the front, on the right side of the chassis * Underrun protection, bolted * Plastic quarter fenders ----Tipping platform: * Net hooks on each of the bearings of the central locking mechanism, as well as 2 on the front wall * Steel pallet-sided 3-way tipping body with adjustable Strong side panels (continuous side walls with internal tube reinforcement at the top - without center rails - can be folded down with side panel spring-assisted lifters) * Rear frame rails bolted * Combination steel wing doors - rear wall, 2-wing, asymmetrical split - can be pivoted and locked at 270° - not foldable - as well as with additional pivoting frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open * 4 mm sheet metal floor made of fine-grained steel ----Load securing: * 1 x 5-ton lashing eye in each corner * 4 x 3-ton lashing eyes on each side, recessed in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: Crodex Hm Rijpfx Aafsi * Rear receiving rail for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment below the loading area in the chassis for the ramps, lockable from the rear ----Tires: * Tires 358/55 R 19.5 ----Painting: * Drawbar, underrun protection, rear frame, folding support legs at the rear hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) - can be changed up to approx. 6 weeks before completion ----Information: * Superstructure - reinforced - with load securing certificate * Errors and prior sale subject to change * Sample images ----Delivery time: * Available for immediate delivery from week 47/2026

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: Crjdpfx Aox Hm Rcjafji * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical front support legs * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm at the front, on the right side of the chassis * Underrun protection, bolted * Plastic quarter fenders ----Tipping platform: * Net hooks on each of the bearings of the central locking mechanism, as well as 2 on the front wall * Steel pallet-sided 3-way tipping body with adjustable Strong side panels (continuous side walls with internal tube reinforcement at the top - without center rails - can be folded down with side panel spring-assisted lifters) * Rear frame rails bolted * Combination steel wing doors - rear wall, 2-wing, asymmetrical split - can be pivoted and locked at 270° - not foldable - as well as with additional pivoting frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open * 4 mm sheet metal floor made of fine-grained steel ----Load securing: * 1 x 5-ton lashing eye in each corner * 4 x 3-ton lashing eyes on each side, recessed in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear receiving rail for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment below the loading area in the chassis for the ramps, lockable from the rear ----Tires: * Tires 358/55 R 19.5 ----Painting: * Drawbar, underrun protection, rear frame, folding support legs at the rear hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) - can be changed up to approx. 6 weeks before completion ----Information: * Superstructure - reinforced - with load securing certificate * Errors and prior sale subject to change * Sample images ----Delivery time: * Available for immediate delivery from week 47/2026

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no in-truck installation required) * 15-pin power connector * LED rear lights 12/24 V * Removable LED beacon at the rear ----General Accessories: * Support winch at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Area: * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of profiled steel sheet, foldable with side wall spring lifters * Steel rear wall insertable between the ramps – storage bracket inside at the front wall when not in use * Removable bolted rear stanchions * Inclined access ramp at rear, approx. 860 mm ----Floor Covering: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the access slope and externally on the lowbed platform (from front to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation option for 3 t folding lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Multiple holes in front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 870 mm (retractable to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in black * Side walls painted in RAL 9010 pure white ----Information: Crsdox Ipapepfx Aafei * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Vehicle is immediately available