Used Müller-Mitteltal Open Flatbed Trailers for sale (257)

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side Credol Thwcopfx Aafoi * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3 in 1 – suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles Csdpsl Thv Refx Aafori ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made from powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet, approx. 960 x 300 x 400/450 mm on right side * Plastic impact protection buffer at the rear * Mechanical drop supports at the rear ---- Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll containers * Steel floor with roller recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp lock as well as mechanically pluggable front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum capacity of 10 m³ possible * Includes 8 repositionable skip centering stops for lateral centering, front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip coating in the ramp pathway area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings, side-mounted for attaching tensioning elements, for positive and friction-locked securing of skips * 4 lashing rails per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Info: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 44 / 2026

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: * Jost landing gear at the front Cjdpfxjpk D Dqe Aafori * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm on the right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Lowbed Deck: * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood flooring, clamped version * Pre-fitted for subsequent installation of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal profile steel – folding, with drop-side lift support * Steel rear wall, can be slid between the ramps – storage holder in front of bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame approx. 45 degree flanged with 2 t lashing points every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the bulkhead and end crossmember for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear ramp approach angle approx. 860 mm ----Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Sideboard paintwork in RAL 9010 pure white * Paintwork for the side panels available in any RAL color for an extra charge ----Information: * New vehicle with manufacturer's warranty Cjdpspk D Ncsfx Aafsri * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Codpfx Aaoxgilmsfori

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller?Mitteltal KA-TA-R 11.9 Tandem low-loader, three-sided tipping trailer with ramps Inquiry number: 11731, available immediately * NEW vehicle, not yet registered * Available in RAL 9016 traffic white * Delivery possible for an extra charge! * GVWR: 11,900 kg, payload 8,750 kg. * Floor galvanized * 5m x 2.42m x 0.5m side walls, hinged, foldable, and removable, prepared for later retrofitting of side wall extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping bridge for the loading ramp * Incl. loading ramps 3.31m, 8t pair * Tool box made of plastic, mounted on the chassis frame on the right side in the direction of travel * 4 UVV lashing eyes LC 5000daN, recessed and foldable, at the front and rear * 8 lashing eyes LC 3000daN, recessed and foldable, in the tipper bed Credpfxe Af Dk Ee Aafji * Net hooks * Drawbar continuously adjustable in height, hot-dip galvanized, drawbar eye 40mm * Frame galvanized * Tires 235/75R 17.5, (4), BPW axles, parabolic springs * Tire pressure monitoring system * EBS * LED lighting system for 12+24 volts * Side marker lights with turn signal control * Bolted, galvanized rear supports * Excavator bucket rest mounted on the front wall * Two-step access in front of the front wall (galvanized) * ---- * Please request a quote from us; additional equipment possible * Financing available from 495 € net per month for 60 months without down payment and without residual value. An offer from our financing partner "FM LeasingPartner". * ---- Our opening hours Monday - Thursday: 08:00 - 17:00 Friday 08:00 - 15:00 Outside of opening hours, we are available by appointment. Whatsapp Leasing, financing, trade-in possible.

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring and tension lock ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front fender made of molded plastic and rear fender made of straight, galvanized steel sheet, each with splash protection * Toolbox made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control unit for retrofitting the hydraulic side ramp adjustment ----Loading Area: Crjdpfxol Th Nno Aafei * Above the slewing ring: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach ramp) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 30,440 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm drawbar eye and stepless height adjustment ----Electrical System / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation - * SmartBoard as an information tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED rear lights * LED marker lights (removable) at the rear ----General Components: * Warning sign packages at the front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, on the right side * Closed plastic fender at the front * Straight steel mudguards at the rear, each with splash protection (spray mist suppression) * Lateral impact protection ----Low-bed Platform: * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and locking mechanism * Floor over the turntable platform made of 50 mm needlewood, and in the low-bed platform made of 60 mm needlewood * Rubber coating 20 mm instead of wooden floor in the running area with a low-bed length of 6,780 mm including the access ramp * Rubber coating on the access ramp, left and right, approx. 860 mm long * 4 lashing eye pockets on each side (however, no lashing bars included) with simultaneous 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lasi - Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes in the outer frame of the turntable platform Low-bed: * 4 pairs of 10-ton lashing eyes on each side of the outer frame, retractable and loadable in all directions Cedpfx Aeylfvgeafsri * 2 pairs of 13.4-ton swiveling lashing eyes on each side at the rear ----Ramps: * Rubber coating on the folding access ramps * Hydraulic folding ramps with hydraulic extendable front section, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear Support: * Hydraulic rear support ----Width Extension: * 8 pairs of galvanized folding outriggers for 3 m overall width (however, not in the rear slope) * Width extension boards stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the access ramp, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4-ton lashing eyes on the side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 - max. 120 l/min.) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm access ramp) * Loading area above the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm, +/- 20 mm ----Painting: * Reflective contour striping on the sides and at the rear * Chassis, turntable, access ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black color ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 30,440 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles Csdpfjylfvmex Aaferi ----Suspension: * Air suspension with lifting and lowering system and rapid release valve (RtR valve) ----Drawbar: * Straight drawbar with 50 mm drawbar eye and stepless height adjustment ----Electrical System / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation - * SmartBoard as an information tool with pressure sensors for axle load display per axle group * 15-pole power connector * LED tail lights * Detachable LED marker lights at the rear ----General Components: * Warning sign packages at the front and rear * 2 x toolboxes made of galvanized, powder-coated sheet steel, approx. 650 x 300 x 600 mm, on the right side * Closed plastic fender at the front * Straight steel splash guards at the rear, each with a spray guard (spray mist reduction) * Side impact protection ----Lowboy Platform: * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. cover and lockable * Floor over the turntable platform made of 50 mm and in the lowboy platform made of 60 mm hardwood * 20 mm rubber coating instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp * Rubber coating on the ramp on the left and right sides, approx. 860 mm long * 4 lashing eye sockets on each side (but no lashing bars included) with simultaneous 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lasi Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes in the outer frame of the turntable platform Lowbed: * 4 pairs of 10-ton lashing rings on each side in the outer frame, retractable and loadable in all directions * 2 pairs of 13.4-ton swiveling lashing rings at the rear on each side ----Ramps: * Rubber coating on the folding ramps * Hydraulic folding ramps with hydraulically extendable front section, approx. 4,650 x 720 mm * Hydraulic side ramp adjustment & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for a total width of 3 m (but not in the rear ramp) * Widening boards stored on the left side in a storage compartment ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp, approx. L = 2,100 mm x W = 740 x D = 190 mm * 2 pairs of 6.4-ton lashing rings on the side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 - max. 120 liters/min.) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Loading area over the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm, +/- 20 mm ----Painting: * Reflective contour strip on the side and rear, * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sales are subject to change ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm high smooth steel bulkhead * Bolted rear posts * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approximately 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing points in the front and rear crossmembers * Profifix lashing rail, centered lengthways, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (collapsible to 20 mm clearance) * Hydraulic flow divider installed in trailer (for hydraulic pump flow from the truck exceeding 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted black * Drop side panels painted in RAL 9010 pure white Crsdpfx Aajrwc R Rofoi * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to misprints and prior sale ----Delivery time: * Immediately available ex-works Egestorf

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 06/2006, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 1,000 mm, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing eyes, underrun protection, front support, swing tailgates. Body: 3-way tipper trailer with steel drop sides, swinging and folding down, 2x BPW axles, drum brakes! Loading height approx. 1040mm. Crsdpfxoytxx Ro Aafoi Drop sides foldable at the top & bottom! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalising unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent fitting of container locks * Bolted, 400 mm smooth-sheet bulkhead * Bolted rear stanchions * Side panels with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm Cjdorwc R Aopfx Aafjri * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point each in the front and rear corners * Various drilled holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised * Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone * Side panels painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for maneuvering purposes on the first axle, activated via EBS (no truck-side installation required) Cedpfxsykx Nqe Aafori * Last axle is a trailing steering axle with electro-pneumatic steering lock * Lock for the trailing axle, actuated from the driver's cab for maneuvering purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with raise/lower system and RtR valve ----Electrical / Lighting: * Smart-Board installed as an information tool on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator actuation * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-out supports at the rear * Straight steel fenders * Spare wheel carrier in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning panel sets at front and rear * Pivoting arm as a carrier for connection lines from the truck to the trailer ----Low Loader Bed: * Second kingpin position * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated steel plate (W = 2,480 mm x H = 500 mm x L = 665 mm) with hinged lid * 400 mm high aluminum sideboards (RAL color of choice), foldable and removable on the fifth-wheel platform * 150 mm high plug-in rear wall * Rear slope on the fifth-wheel platform towards the low-bed, approx. 700 mm long with tread plate covering and a perforated bar at the end for hooking on aluminum ramps * Fifth-wheel platform with 50 mm clamped timber planks, and low-loader deck with 60 mm clamped timber planks * Tear plate over the axles * 9 mechanical swing-out extensions for total width of 3 m (not on rear slope), extension boards available with a transverse storage compartment under the loading area * Prepared for 3 insertion shafts under the fifth-wheel platform for storing either aluminum ramps or timber planks for wheel recess covers * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Fifth-wheel Platform: * Perforated outer frame, bent at 45°, with hole pattern for lashing equipment (2 t lashing force per lashing point at a minimum spacing of 480 mm) * On each side, 3 x 13.4 t recessed lashing rings in the floor (1 on the fifth-wheel platform, 1 on the longitudinal member after the neck step, 1 above the middle axle next to the longitudinal member) Low Loader Platform: * On each side, 3 x 13.4 t lashing rings on the outer frame (1 at the neck step of the fifth-wheel platform, 1 at the start of the ramp, 1 at the end of the ramp) * On each side, 2 x 10 t lashing rings (1 between the front wheel recess and the first axle, 1 between the 2nd and 3rd axle) * On each side, 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle over the steering axle up to the rear crossmember, continuous with internal reinforcement profile, approx. 770 mm wide x T at t

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Coupling: * Drawbar adjustable in height by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a wheelbase of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical System / Lighting: * 15-pole power connector * LED lighting system 12 / 24 V * 2 LED reversing lights additionally at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Support winch at the front * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side, left & right * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood flooring, * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45 degrees angled with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible - 5 x 3-ton UVV lashing eyes installed on each side - * In the corners at the front and rear, 1 x 6.3-ton lashing point each (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beam for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed at the rear under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air reservoir, support winch at the front and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted Codpfev D Tbdox Aaferi ----Delivery Time: * Available from approx. week 39/2026

Condition: used, maximum load weight: 14,760 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,000 mm, total length: 9,450 mm, total width: 2,550 mm, total height: 1,350 mm, Equipment: ABS, Muller-Mitteltal RS T-18.0 with container sliding system Credez Ew Haepfx Aafsi First registration: 25-02-2019 BPW Eco Plus axles with ABS and EBS Serial number: WMM00000J0062895 Tires: 265/70 R19.5, approximately 60% tread Air suspension Total weight: 18,000 kg, unladen weight: 3,240 kg, payload: 14,760 kg Chassis length: 7.0 m For containers from 5 to 7 m Chassis is hot-dip galvanized Wheelbase: 5.20 m Drawbar: 40 mm Errors/typos and prior sale reserved.

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock number 5820 Müller-Mitteltal 3-sided steel tandem tipping trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13,5 * First registration: 08/2017 * Total weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes Crsdjzdm S Sspfx Aafoi * Suspension: leaf spring suspension * Tires: 385/55 R 19.5 approx. 50% on steel rims * EBS * Color: galvanized chassis, tipping body blue * Tipping body interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipping body with 4 pairs of foldable lashing eyes in the floor * Full-load support at the front * Additional supports at the rear (foldable) * Tool box at the front right * Quarter fenders * Load securing certificate * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 8,770 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, Equipment: ABS, tail-lift, * Müller?Mitteltal ETÜ-TA-R 11.9 Low-bed trailer/Tandem trailer/Ramps * NEW VEHICLE, not yet registered * Now available immediately in RAL 7016 anthracite Inquiry number: 11653 * GVWR: 11.9t, Payload: 8.77t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27m x 2.47m x 0.4m steel side walls, laser-welded, foldable with 2 spring supports * Front wall, bolted, made of smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with spacer behind the front wall * Rear supports, bolted (hot-dip galvanized) * Hardwood floor, 50mm thick * 4 UVV lashing rings LC 6300daN, front and rear, countersunk in the cross member * 10 UVV lashing eyes LC 3000daN, countersunk in the existing hole pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating in a non-slip design * Device in front of the front wall for subsequent mounting of container locking mechanisms * Tool box made of plastic in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40mm towing eye * 2 LED reversing lights on the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with turn signal control * 1 all-round LED beacon (warning flashing light), removable, including bracket and installation * Trade-in possible * Financing via our cooperation partners with or without down payment or residual value and various terms possible. Request an offer from us! * Lease-purchase example from our partner FM LeasingPartner: €485 net per month for 60 months, without down payment and with a residual value of €0. Other terms with or without down payment/residual value are possible. Request an offer from us! We are a MüllerMitteltal trading partner! Cjdpfoyxbdbox Aafori * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of these hours, we are available by appointment * We speak German, we speak English, мы говорим по-русски, mowimy po polsku, on parle français

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Starting aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable for operation from the tractor) ----Air suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-type adjustable towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via taillight ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel mudguards * Two-step access ahead of the front wall on the left-hand side * Shovel and broom holder ahead of the front wall * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising surface ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote with fast feed for unloading, but not for lifting * Emergency stop switches on left and right sides * Container support with four side supports and one roller at the rear on each side * Hydraulic rear interior locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is outside the charging cradle, the service brake must be applied to activate the remote. Brake connections must remain connected at all times to open the hydraulic/pneumatic control valves * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: Codpfx Aox Dp Ageaferi * Unladen: approx. 1,300 mm with lowered lift axle ----Coating: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Condition: used, empty load weight: 3,500 kg, maximum load weight: 9,500 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 11/1993, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, 2 axles, tandem axle, leaf spring suspension, lashing eyes, side guards, front supports, swing-out tailgates. Cjdezgu Sfepfx Aaferi Superstructure: Tandem 3-way tipper trailer. Spare wheel available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: used, maximum load weight: 7,850 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 08/2010, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Errors and prior sales excepted! Internal number: A2. A0053979 – EQUIPMENT - Ex-German Armed Forces - Twin-axle - Loading ramps - Pintle hook (military) - Wooden floor - 11 tons gross vehicle weight - Storage box - Hand-operated spindle brake - UVV lashing rings ... and more ---- The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sales excepted. We will gladly accept your vehicle as a trade-in. Csdpfx Aoz Emq Uoaferi Financing / leasing also possible without a down payment! Do you have any further questions? We would be happy to advise you!

Condition: used, empty load weight: 3,420 kg, maximum load weight: 7,080 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 04/1998, loading space length: 4,480 mm, loading space width: 2,220 mm, loading space height: 500 mm, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, leaf spring suspension, 2 axles, tandem axle, side guards, front support legs, rear support legs, swinging side gates, height-adjustable drawbar. Body: 3-sided tipping trailer. This trailer comes from the municipal administration! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Cedpfoy U Ifdjx Aaferi

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards Crjdpfomi Tcqex Aafei ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Codpewypl Nofx Aafjri

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA - R 14.4 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * 15-pin power connector * LED lighting ----General components: * Front support winch * Outboard folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm at the front right, outside on the front panel * Side impact protection * Plastic quarter fenders ----Loading area: * 50 mm hardwood floor * Provision for retrofitting 20" container locking devices in front of the front panel and at the rear * Screwed front panel made of smooth sheet metal * Steel side walls - trapezoid profiled - foldable, divided in the middle 1x * Steel rear wall can be slid in between the ramps, bracket for storage when not in use inside in front of the front panel * Rear crossbars screwed on ----Load securing: * Perforated outer frame, angled approx. 45 degrees, with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side * 1 x 6.3-ton lashing eye in each corner at the front and rear * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm Credel Thvxspfx Aafei ----Painting: * Chassis, drawbar, front panel, rear gate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling, and support winch painted in a black tone * Side panels in RAL 9010 pure white ----Information: * --reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf