Used Müller-Mitteltal Open Flatbed Trailers for sale (274)

Condition: used, maximum load weight: 29,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2010, next inspection (TÜV): 05/2026, Dimensions - Length: 11,750 mm Unladen weight: 10,250 kg Axle load: 2 x 10,000 kg Load length over turntable: 2,400 mm incl. 350 mm bevel Load length: 7,700 mm incl. 900 mm bevel Loading height: 880 mm Width: 2,550 mm, extendable to 3,000 mm ? Recess for excavator arm storage (LxWxH approx. 2,500 x 740 x 180 mm) SAF axles with air suspension Two-piece hydraulic ramps: 2,100 mm + 2,000 mm long, 650 mm wide incl. Hydraulic ramps adjustable Hydraulic rear support Wheel recess after the 2nd axle: ? Front wheel recess, top length approx. 2,000 mm x 1,100 mm, bottom depth approx. 350 mm Wheel recesses between 3rd and 4th axle: ? Rear wheel recess, top length approx. 1,300 mm x 550 mm, bottom depth approx. 220 mm Rsdpfoxpmmmsx Akcjcd

Condition: used, maximum load weight: 7,700 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/1979, next inspection (TÜV): 07/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total width: 2,350 mm, total height: 1,650 mm, Equipment: tail-lift, Müller MItteltal KA-TA * Tandem three-way tipper * Heavy-duty trailer * First registration: 08/29/1979 * Next inspection: 07/2027 * Gross vehicle weight: 10,500 kg * Tare weight: 2,800 kg * Payload: 7,700 kg * Overall dimensions: 6,200 mm x 2,350 mm x 1,650 mm * Internal dimensions: 4,500 mm x 2,200 mm x 500 mm * Side walls painted * Air brake system * Steel side walls, rear section can be folded down, removable, and pivoting * 2 supports at the rear * Support wheel ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we are also offering it on other platforms. We strongly recommend an inspection and assessment to ensure that the buyer does not have any incorrect expectations regarding the condition and suitability of the item. Inspections and assessments are possible and expressly welcome at any time by prior appointment!!! Illustrations are similar and may include optional accessories that incur an additional charge. The specified internal dimensions are approximate. Information without guarantee! Errors and omissions excepted! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! Redpfx Akezn E Uyececd EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable Rodpoq Euagefx Akcscd * Extended connection cables for forestry and agricultural tractors * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the side, right * 2-step step on the left side in the direction of travel at the front * Underrun protection, bolted * Plastic fender ----Tipping body: * Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5-ton lashing point in each corner * As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks * Lockable storage compartment at the rear below the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized * Axles, springs, air tank, flange coupling, and support winch painted in a black tone * Painting of the side boards in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RAK 18.0 Outer Roller with Rear Tilting Function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm drawbar eye and height adjustment via tension spring & locking bolt ----General Accessories: * Plastic tool box - approx. 858 x 500 x 500 mm - on the right side * Closed plastic fenders, front and rear * Closed side underrun protection * Rear underrun protection, bolted on Rodpfxex Ipbms Akcjcd * Storage box for container nets, made of galvanized perforated sheet metal, approx. 1,000 x 500 x 500 mm * Foldable A-sign at the rear * Rear impact protection buffer ----Electrical System / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * TPMS tire pressure monitoring system ----Suitable for Container Lengths: * For containers from 6,500 mm to 7,000 mm ----Container Running Surface / Tilting Bridge: * External roller guide through flat steel edging with a clear distance of approx. 2,180 mm in conjunction with 3 centering pieces on each side for container guidance * To accommodate and stop the container rollers, 2 recessed roller bearings connected to the tilting frame are mounted on the rear side, with pneumatic actuation to prevent slippage in the longitudinal direction * The positive locking of the roll-off containers is achieved via a pneumatic cross-bracing unit installed in the front of the tilting frame and operable from the outside (single-sided operation) * Chassis frame with rear tilting main frame - hydraulic tilting system in single-cylinder design * Tilting angle 42° * Rubber pads between chassis and tilting frame * The containers are pushed on from the front, hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Painting: * Underrun protection and locking parts (without topcoat) * Turntable, air tank, axles, slewing ring and drawbar painted in a black tone * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 tons BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pole power connector * 12 V 13-pole auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles Rcedjl Thw Iepfx Akced * LED tail lights ----General components: * Mechanical support crank at the front * 2 mechanical folding supports at the rear * Plastic tool box on the right side * 2-step footstep on the left side, facing forward * Underrun protection, bolted * Plastic quarter fenders ----Tipping body: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, foldable tailgate as well as pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 tons lashing point in each corner * as well as 4 x 3 tons lashing points on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paint finish: * Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized * Axles, springs, air tank, flange coupling and support crank painted in a black tone * Painting of the side panels in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, RAK 18.0 Outer Roller with Rear Tilting Function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm drawbar eye and height adjustment via coil spring and tension lock ----General Components: * Plastic toolbox - approx. 858 x 500 x 500 mm - on the right side * Closed plastic fenders, front and rear * Closed side underrun protection * Rear underrun protection, bolted on * Storage box for container nets, made of galvanized perforated sheet metal, approx. 1,000 x 500 x 500 mm * Folding A-frame sign at the rear * Rear impact protection buffer ----Electrical System / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pole 24V power socket * LED lighting system for 12 & 24V * 2 additional LED reversing lights * TPMS (Tire Pressure Monitoring System) ----Suitable for Container Lengths: * For containers from 6,500mm to 7,000mm ----Container Running Surface / Tilting Bridge: * Roller guidance on the outside through flat steel edging with a clear distance of approx. 2,180 mm, in conjunction with 3 centering pieces on each side for container guidance * On the rear side, 2 recessed roller bearings connected to the tilting frame are installed to accommodate and stop the container rollers, with pneumatically operated locking to prevent longitudinal sliding * The positive locking of the roll containers is achieved via a pneumatic cross-locking unit installed in the tilting frame at the front and operable from the outside (single-side operation) * Chassis frame inside with rear-tilting main frame - motor-hydraulic tilting system in a single-cylinder design * Tilting angle 42° * Rubber pads between chassis and tilting frame * Loading of the containers takes place from the front, hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Unloaded, approx. 1,270 mm ----Painting: * Underrun protection and locking parts (without topcoat) * Bogie, air tank, axles, swivel ring, and drawbar painted in a black color * Hot-dip galvanized ----Information: Rcodpfjx Ipa Aox Akcod * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at front * External foldable support legs at rear * Plastic toolbox on the front right outside, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * LED lighting ----Loading Platform: * Loading area 5.37 m * 50 mm softwood floor * Bolt-on bulkhead made of flat sheet metal * Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: Redpfx Aksl Th Ncjcscd * Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner, one lashing ring, 6.3 t each * Various holes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm from chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade * Side wall paintwork in RAL2011 deep orange * Custom color paintwork for side panels available for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * 40 mm flange coupling ----General components: * Jost support leg at the front * Outboard, hot-dip galvanized folding supports at the rear * Plastic quarter fenders * Plastic toolbox at the front right on the front panel ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting ----Loading platform: * Loading platform 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision on the front panel for subsequent installation of container locking mechanisms * Bolted front panel made of smooth sheet metal * Side walls made of trapezoid-profiled steel sheet, foldable with spring-loaded side rails * Steel rear wall can be slid in between the ramp supports when not in use, positioned inside the front panel * Rear crossbars bolted ----Load securing: * Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * One 6.3-ton lashing eye at each corner at the front and rear * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars and loading ramps * Painting of the side rails in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: Rodpfx Asrvvfwjkcecd * Errors and prior sale subject to change * New vehicle with manufacturer's warranty ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: Redpfx Aketr Sucscjcd * Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation * 15-pole power socket * LED tail lights ----General components: * Mechanical support jacks at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Bolted underrun protection * Plastic quarter fenders ----Frame: * Main frame made of fine-grain steel ----Tipping platform: * Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking * Rear rails bolted on * Steel rear wall inserted in front of the ramps * 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm) ----Painting: * Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone * Side boards and platform painted in RAL 9010 pure white * Painting of the side walls and tipping platform in a RAL color is possible for an extra charge ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Mechanical axle compensation at the rear * Side impact protection Rcsdpfx Asx Ipbgskcod * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of molded plastic, and straight, galvanized steel splash guards at the rear, each with splash protection * Reflective contour strip on the sides and at the rear ----Low-loader platform: * Folding cover (hot-dip galvanized) for the tool compartment in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing option * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not on the rear slope) * Extension boards stored in the center of the loading area ----Load securing (LaSi package): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame - 13.4 tons in the corners, otherwise 10 tons ----Excavator arm rest: * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4-ton lashing points on the side in the excavator arm rest) ----Ramps: * Hydraulically operated, one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic side ramp shifting ----Loading area: * over the turntable: approx. 1,960 x 2,520 mm * rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach angle) ----Loading height: * unladen approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paint finish: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black hue * Vehicle is hot-dip galvanized ----Information: * --technically possible gross vehicle weight of 30,000 kg-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, Year of construction: 2026, RA-T 18.0: Loadable from the front and rear ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes 19.5" * Automatic braking when the transverse locking units are opened ----Axles: * 2 x 10-ton BPW wide-track axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – without truck-side installation * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (switched via reverse gear) ----Drawbar: * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm drawbar eye and height adjustment via tension spring & locking clamp ----General components: * Plastic tool box 858 x 500 x 500 mm on the right side * Storage box for container nets made of galvanized perforated sheet metal, 1,000 x 500 x 500 mm on the side * Closed plastic wheel arches, front and rear * Closed side impact protection (RAL 9010 pure white) as an advertising area * Underrun protection at the rear * Plastic impact protection buffer at the rear * Foldable A-frame sign * Hazardous goods sign with accompanying document pocket and reflective parking warning sign at the rear ----Container area: * Loading possible from the front with lowering of the roller track at the rear and plug-in stops * Roller recesses in the area of the swivel ring with mechanically adjustable stop angles (2 positions) at the front left and right on the roller tracks * Roller track length approx. 6,830 mm * Pneumatic 4-point clamping lock * For the transport of external roll-off containers according to DIN 30722 Part 1 - Dekra load securing certificate available Rcodpfx Akjl Tn U Roced ----Loading height: * When loaded, approx. 1,130 mm ----Painting: * Chassis and locking parts hot-dip galvanized * Air tank, axles, swivel ring and drawbar painted in a black tone ----Information: * --Technically possible gross vehicle weight of 20,000 kg-- * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7-ton Gigant axles * Air suspension with lifting and lowering system * Drawbar adjustable by 300 mm in height * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation * 15-pole power connector * LED lighting * Front support jacks * Outboard, folding support legs at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel * Side underrun protection * Plastic quarter fenders * 50 mm hardwood flooring * Device for retrofitting 20" container locking mechanisms in front of and behind the front panel * Bolted front panel made of smooth sheet metal * Side walls made of steel sheet - trapezoid-profiled - foldable, divided in the middle 1x * Steel rear wall can be slid between the ramps, stored when not in use inside the front panel * Rear cross members bolted * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible - 4 lashing points installed on each side * 1 x 6.3-ton lashing point in each front and rear corner * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN * Various holes in the front and end cross member for 1.2-ton lashing * One-piece mechanical grating access ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear approx. 860 mm * Chassis, drawbar, front panel, tailgate, folding support legs and access ramps hot-dip galvanized * Axles, springs, air tanks, flange couplings and support jacks painted in a black tone * Side boards in RAL 9010 pure white * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted Rcjdsl Th Dfopfx Akcsd * Immediately available from Egestorf

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal, without installation on the truck side * 15-pole power connector * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Bolted underbody protection * Plastic quarter fenders ----Frame: * Main frame made of fine-grain steel ----Tipping body: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lifters, and pivoting via manual central locking * Rear rails bolted * Steel rear wall inserted in front of the ramps Redpjtr St Uofx Akcecd * 1 x 5-ton lashing eye in each corner, as well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grating ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable to 80 mm) ----Painting: * Chassis, drawbar, rear rails, underbody protection, mechanical fall supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support winch painted in a black shade * Side boards and tipping body in RAL 9010 pure white * Painting of the side walls and tipping body in a RAL color is possible for an extra charge ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via coil spring and tension lock ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED taillights * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of molded plastic and straight, galvanized steel splash guards at the rear, each with splash protection * Reflective contour tape on the sides and rear ----Low-Loader Platform: * Folding cover (hot-dip galvanized) for the tool compartment in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension planks stored in the center of the loading area ----Load Securing (LaSi Package): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end carrier, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Ramps: * Hydraulically operated, one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic side ramp adjustment ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) ----Loading Height: * Unladen: approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * Vehicle is hot-dip galvanized ----Information: * --Technically, a maximum permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf Rcjdpjx Ipb Hsfx Akcod

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinder * Drum brakes * 2 x 7-ton Gigant axles * Air suspension with lifting and lowering system * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck side * 15-pin power connector * LED lighting * Front support jacks * Outboard folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right side, on the front wall * Side underrun protection * Plastic quarter fender * 50 mm softwood floor * Before the front wall and at the rear, provision for subsequent installation of 20" container locking mechanisms * Bolted front wall made of smooth sheet metal * Side walls made of steel sheet - trapezoidal profile - foldable, divided in the middle * Steel rear wall, slidable between the ramps, with mounting bracket for storage inside, in front of the front wall when not in use * Rear cross members screwed on * Perforated outer frame, bent at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side * One 6.3-ton lashing eye each in the corners at the front and rear * Profifix lashing bar in the longitudinal axis, in the middle, for lashing with a load capacity of up to 3000 daN Redsl Thvxepfx Akcecd * Various holes in the front and end beam for 1.2-ton lashing * One-piece mechanical grating ramp with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear, approx. 860 mm * Chassis, drawbar, front wall, rear tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange couplings and support jacks painted in a black tone * Sideboards in RAL 9010 pure white * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange coupling: * Drawbar with 300 mm height adjustment * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pin power connector * LED lighting ----General attachments: * Support winch at the front * Outboard folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel * Lateral impact protection * Plastic quarter fenders ----Low-loader platform: * 50 mm hardwood flooring * In front of the front panel and rear slope, provision for retrofitting container locking mechanisms for the transport of 20" containers * Screwed front panel made of smooth sheet metal Rjdpfx Ajv D Tcbekcocd * Steel sheet metal side walls - trapezoidal profile - foldable in the middle, divided 1x * Steel rear wall can be slid in between the ramp brackets when not in use, inside in front of the front panel * Rear crossbeams screwed on ----Load securing: * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing eyes possible every 600 mm * In the corners, front and rear, 1 x 6.3-ton lashing point each * In the front and end beam, various holes for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Painting: * Drawbar, front panel, rear door, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support winch painted in a black tone * Painting of the side walls in RAL - 9010 pure white ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * 300 mm height-adjustable drawbar * 40 mm flange towing eye ----General Attachments: * Jost support winch at the front * External folding support legs at rear * Plastic toolbox on the right front exterior of the front wall * Side underride protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Load area 5.37 m * 50 mm softwood floor * Bolted bulkhead made from smooth sheet metal * Drop sides made of trapezoidal-profiled steel sheet, foldable, with drop-side spring assist * Steel tailgate, slidable between ramp supports when not in use, stowed inside in front of the bulkhead * Screw-mounted rear stanchions ----Load Securing: * Perforated external frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye coated in black Rjdpfx Akol Th Nrscscd * Drop-side panels painted in RAL2011 deep orange * Side walls can be painted in any RAL color for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pin power connector * LED lighting ----General components: * Front support jack * Outboard folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm on the front right outside of the front wall * Lateral impact protection * Plastic quarter fenders ----Low-loader platform: * 50 mm softwood flooring * In front of the front wall and rear slope, provision for the subsequent installation of container locking mechanisms for the transport of 20" containers * Bolted front wall made of smooth sheet metal * Steel sheet metal side walls - trapezoidal profile - foldable, divided in the middle 1x * Steel rear wall can be slid in between the ramp brackets when not in use, positioned inside in front of the front wall * Rear crossbars bolted on Redpfx Akev Eq Evscscd ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing force every 480 mm * Installation of 3-ton chain lashing brackets possible every 600 mm * In the corners, front and rear, 1 x 6.3-ton lashing point each * Various drill holes in the front and end crossmembers for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach slope at the rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Painting: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support jack painted in a black tone * Painting of the side walls in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Condition: used, maximum load weight: 10,950 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 04/2007, next inspection (TÜV): 04/2027, total width: 2,550 mm, total height: 1,500 mm, Equipment: ABS, * Air suspension ----* Tire size: 285/70R22.5 * Technically permissible total weight: 13,500 kg * Unladen weight: 2,550 kg * Overall length: 6,600 mm * Next inspection due: 10/2026 Rsdpfx Akezb Aviececd ----Vehicle number: 12150----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We would be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----Your VTS Team

Condition: used, maximum load weight: 31,820 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/1980, loading space length: 9,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 1980, Equipment: ABS, tail-lift, Müller-Mitteltal T4 Lowboy Trailer * SAF axles with drum brakes * Twin tires * Low platform with extended loading area * Hydraulic loading ramps, adjustable (2 units) * Drive-over gooseneck * Additional supports at the rear * Turntable design Rcjdpfx Aksy Skl Iscod ----Dimensions & Loading Area: Loading area approx. 9,800 mm * Loading area width: 2,550 - 3,000 mm * Loading area height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ----Vehicle number: 11892----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----?YOUR VTS TEAM

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes Rcjdpfxoza Rlie Akcjd * Trailing axles * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. ----?YOUR VTS TEAM

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem low-loader with many extras: Equipment: Rcodpfx Asxcxmfskced 2 spring-loaded supports for 400mm high steel side walls Reinforced and certified superstructure according to EN 12642 XL, including cargo securing certificate 10 UVV lashing eyes in the existing hole pattern in the outer frame Additional wooden floor in a clamped design Tires 235/75R17.5 4 BPW axles instead of GIGANT Platform extension by 870 mm to 6,270 mm Ramps in one piece with hot-dip galvanized grating in a non-slip design Lockable tool box with a payload of 45 kg Paint: Wheels silver Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized Axles/springs black Side walls RAL2011 traffic orange We would be happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of new equipment in stock and equipment available for demonstration. Please contact us! We rent out vehicles with and without drivers and machinery. A large number of used machines and equipment are constantly available. Subject to technical changes, errors, and prior sale.

Condition: new, maximum load weight: 9,130 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2026, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles Redjwyhzvopfx Akcocd * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 9,130 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2026, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale Rsdpfowyhzpjx Akcecd * Available immediately from Egestorf

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 10/2013, total width: 2,750 mm, Year of construction: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Lowboy Trailer | 3-axle | Hydraulic lowboy platform | 48 t permissible total weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi lowboy trailer is ideal for transporting machinery, construction equipment, and heavy loads. It is known for its robust construction and reliability. Technical data: Make: Müller Mitteltal Type: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible total weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible roll-on load: 18,000 kg Loading platform: Low loading platform (lowboy design) Loading ramps: hydraulically operated Low loading platform: hydraulically adjustable (up/down) Tires: in good condition Construction: All-steel chassis Maximum speed: 80 km/h Design & Options: Heavy-duty lowboy design Hydraulically adjustable low loading platform (up/down) Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is used but functional and shows signs of wear and tear consistent with its age and use. Technically, it is a robust and reliable machine transporter. Ready for immediate use – ideal for transport companies and construction firms. For further information or to arrange a viewing, please contact us. Rcedpfx Akezmr Tyscjd = Further Information = Axle configuration Rear axle 1: Dual tires; Max. axle load: 10,000 kg; Steerable Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Steerable Rear axle 3: Dual tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 14,500 kg Payload: 33,500 kg GVWR: 48,000 kg Maintenance, history, and condition APK (Technical inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Klaas Gerrits, Henk Gerrits, or Mr. Gerrits for further information.