Used Müller-Mitteltal Open Flatbed Trailers for sale (274)

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: ----Brake system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange towing eye: * Drawbar height-adjustable by approx. 300 mm * 40 mm flange towing eye ----General attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front panel ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading area: * Loading area 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision at the front panel for retrofitting container locks Bdodpeq Ra D Eefx Ai Eoc * Bolted front wall made of smooth sheet metal * Side walls foldable, made of trapezoidal-profiled steel sheet with board spring lifts * Steel rear wall can be inserted between ramp supports; when not in use, stored inside in front of front panel * Rear stanchions bolted ----Load securing: * Perforated outer frame, bent at about 45 degrees with 2 t lashing force every 480 mm * Installation of 3 t drop lashing rings possible every 600 mm * Each corner at the front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and ramps * Painted side panels in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from calendar week ...

Condition: used, maximum load weight: 6,610 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2017, next inspection (TÜV): 10/2026, loading space length: 5,500 mm, loading space width: 2,470 mm, loading space height: 2,500 mm, loading space volume: 34 m³, Year of construction: 2017, Equipment: ABS, 2-axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tires: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding curtain * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets capacity Weights: * Gross weight: possible 10,500 kg - derated to 10,000 kg (no SP inspection required) * Unladen weight: 3,390 kg * Payload: 6,610 kg Miscellaneous: * German vehicle * MOT valid until 10/2026 * No SP inspection required due to weight derating New MOT / safety inspections or weight uprating/derating possible upon request. We are happy to assist you in obtaining export/transfer license plates, and can arrange vehicle transfers within Germany. Contact us! --- Bdjdpfxoy Squpe Ai Ejc We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to change, prior sale, and errors! --- Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our special strength lies in the sales of new and used commercial vehicles. On 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and trustworthiness. As customer satisfaction is very important to us, we offer our customers excellent all-round service and provide them with a knowledgeable contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle Loading We are happy to assist you with loading your purchased vehicles. Organization of Special Transports We are happy to help you organize special transports. Day plates / Export plates We can assist you in acquiring export or temporary plates. Handling of Customs Formalities We are happy to assist you in handling customs matters.

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, activated via EBS (no truck-side installation required) ----Suspension: Bjdpjtpta Djfx Ai Eedc * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as an infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for oversize lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel sheet fenders * Spare wheel holder in front of the front wall cross member (spare wheel not included) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from the truck to the semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with front corners beveled at 45°, front toolbox of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm aluminum drop sides (in RAL color of your choice), foldable and removable, on the sides of the fifth wheel platform * Rear board -150 mm- plugged in high * Rear beveled section at the fifth wheel platform leading to the low bed, approx. 700 mm long with checker plate cover; at the end, a perforated strip for hanging aluminum drive-on ramps * Fifth wheel platform with 50 mm clamped wooden planks, low bed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9x mechanical folding extensions to 3 m overall width, except in the rear bevel (extension planks available with closed storage compartment running transverse to the driving direction under the loading area) * 3 recesses under the fifth wheel platform for storing optional aluminum drive-on ramps or wooden planks for wheel recess covers ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame with 45° edges, hole pattern for lashing equipment (2 t lashing force per lashing point at minimum spacing of 480 mm) * 3x 13.4 t lashing rings recessed in the floor on each side (1x on the fifth wheel platform, 1x on the side members after the step, 1x above the middle axle next to the side member) Low loader platform: * 3x 13.4 t lashing rings on the outer frame on each side (1x at start of step on the fifth wheel platform, 1x at start of the ramp, 1x at end of the ramp) * 2x 10 t lashing rings on each side (1x between front wheel well and 1st axle, 1x between 2nd and 3rd axle) * 3x 5 t lashing rings on each side, bolted to the external frames of the wheel wells (2 at the front, 1 at the rear wheel well) ----Excavator arm trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile approx. W = 770 mm x dept

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes engaged on the first axle via EBS (without truck-side installation) * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes via EBS from the driver's cab (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering device as well as Ride-on-Road (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 7-pin socket on the rear side for overlength lighting Bdsdpfx Ajq Euakei Esc * Side marker lights with indicator control * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support winches at the front and swivel supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth wheel platform with front corners chamfered at 45° and front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high drop-side aluminum boards (RAL color of choice) on the sides of the fifth wheel platform, foldable and removable * Rear board inserted 150 mm high * Rear slope on the fifth wheel platform leading to the drop deck approximately 700 mm long with chequer plate covering, and at the end, a perforated strip for attaching aluminum loading ramps * Fifth wheel platform with 50 mm clamped timber planks and drop deck platform with 60 mm clamped timber planks * Chequer plate above the axles * 9 mechanical folding deck wideners up to 3 m overall width, except on the rear slope (widening planks included, stored in a transverse compartment underneath the loading area) * 3 mounting recesses under the fifth wheel platform for storing either aluminum loading ramps or timber planks for wheel recess covers ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled 45°, with hole pattern for lashings (2 t lashing capacity per lashing point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Drop Deck Platform: * 3 x 13.4 t lashing rings per side on outer frame (1 x at the start of the fifth wheel platform step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforcement profile approx. W = 770 mm x rear d

Condition: used, maximum load weight: 6,000 kg, overall weight: 8,800 kg, axle configuration: 1 axle, first registration: 04/2026, Equipment: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available Bodoy R Hx Uopfx Ai Ejdc * Reference number for inquiries: 11652 * RDÜ tire pressure monitoring system * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at the front, spring-assisted square tube supports at the rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height adjustable) * 15-pin power connector * LED lighting * 315/80 R 22.5 tires with closed steel fenders * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepped centering cones made of polyamide * For drum diameters Ø 800-3,000 x (1,700 mm width between drum arms) * Drum lock at the support arm ends and locking mechanism for mounting the cable drum frame to the chassis with a centrally positioned claw lock * Motor-hydraulically operated pulling and pushing cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for the drum drive. * Also includes hydraulic pump unit with Hatz 1B30 Silent diesel engine and hand starter, 6.5 HP (150 bar), selectable pressure supply by switching connection lines between truck hydraulics or the pump unit * Toolbox approx. 500 x 350 x 400 mm * Chassis with hot-dip galvanized drawbar * Advertising space integrated into the side guard, exterior polyester-coated in RAL white * ---- Like new condition (used for only one project) * ---- * Financing available through our partners with or without down payment or residual value and various terms. Request an offer from us! * We are an official Müller Mitteltal dealer! * Example hire-purchase offer from our partner FM LeasingPartner from as little as €595 net/month for 60 months (no down payment, zero euro residual value). * Request an offer from us! ---- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside opening hours, we are available by appointment. * We speak German, English, Russian, Polish, and French. ----

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber taillights ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of chassis Bjdpfsl Th Htsx Ai Esdc * Bolted underrun protection * Plastic quarter mudguards * Net hooks located at each central locking bearing and two at the front wall ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Steel pallet 3-way tipper body with continuous side walls, upper internal tube reinforcement, fold-down without centre posts, with drop side spring lift assist * Rear corner posts bolted * Combination steel wing-door rear wall, 2-leaf, asymmetrical split, can be swung and locked up to 270°, not foldable, equipped with additional swing frame for automatic rear wall opening when tipping. Locking via galvanised rotary latch at rear and central locking. Deactivation function for the automatic rear wall operation when tipping backwards with one leaf open. * 4 mm floor plate made of fine-grain steel * Rear guide rail for loading ramps ----Load Securing: * One 5 t lashing ring fitted in each corner, plus four 3 t lashing points recessed into the outer frame on each side ----Ramps: * One pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable compartment at the rear, recessed below the loading floor in the chassis, for the ramps ----Tyres: * Tyres 285/70 R 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear posts, rear folding supports hot-dip galvanised * Axles, springs, air tanks, and landing gear painted in black tone * Drop side panels painted in RAL 9010 pure white * Side walls paintable in any RAL colour (at extra charge) ----Info: * Reinforced structure with load securing certificate * Vehicle has a daily registration (unused) * Errors and prior sale excepted ----Delivery Time: Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7-tonne Gigant axles ----Suspension: * Parabolic suspension with compensating unit ----Drawbar / Flange Coupling Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting Bdjdpeq Dyvvofx Ai Esc ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation for retrofitting container locks in front of the bulkhead * Bolted smooth steel front wall * Fold-down steel side walls, trapezoidal profile, with drop-side spring assist * Steel rear wall insertable between the ramps; when not in use, can be mounted inside in front of bulkhead * Rear stanchions bolted ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each corner, front and rear, 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing capacity up to LC 3,000 daN ----Ramps: * Single-piece mechanical grid ramps with spring assistance for one-man operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall * Side wall color: RAL 9010 pure white * Painting of the side panels in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 29/2026

Condition: new, maximum load weight: 14,660 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Electrical system / Lighting: * 15-pin power connector * LED tail lights * TPMS (Tire Pressure Monitoring System) ----General components: * Jost support leg at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter fenders ----Low-loader platform: * 50 mm hardwood flooring * Mounting point in front of the front wall for subsequent installation of container locking devices * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with side rail spring lift * Steel rear wall that slides in between the ramps - holder when not in use inside the front wall * Rear crossbars bolted on ----Load securing: * Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing brackets every 600 mm possible * At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Painting of the side walls in RAL 9010 pure white * Painting of the side walls in an RAL color possible for an extra charge * Axles, springs, air tank, flange coupling, and support leg painted in a black tone Bdjdpfxjl Th Hlj Ai Esc ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf near the A7.

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Bodepk D Ncepfx Ai Esdc * 15-pin electrical connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm on the right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Lowbed Deck: * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood flooring, clamped version * Pre-fitted for subsequent installation of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal profile steel – folding, with drop-side lift support * Steel rear wall, can be slid between the ramps – storage holder in front of bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame approx. 45 degree flanged with 2 t lashing points every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the bulkhead and end crossmember for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear ramp approach angle approx. 860 mm ----Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Sideboard paintwork in RAL 9010 pure white * Paintwork for the side panels available in any RAL color for an extra charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit Bedpfx Asrvvflsi Ejdc ----Drawbar / Flange eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Drop-side walls made of trapezoidal steel sheet, foldable with drop-side spring assist * Steel rear wall insertable between the ramps, with holder for storage in front of the front wall when not in use * Rear stakes bolted ----Load securing: * Outer frame with holes approx. 45° bent, 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear cross member for 1.2 t lashing options * Profifix lashing rail centrally along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear ramp slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, including drawbar, front wall, ramps, and rear wall * Side panels painted in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to change and prior sale ----Delivery time: * Available from approx. week 29/2026

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber rear lights ----General attachments: * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side on the chassis * Bolt-on underrun protection * Plastic quarter mudguards Bdjdpfx Aijl Th Dus Eoc * Net hooks at each central locking bearing and 2 at the front wall ----Chassis: * High-tensile steel chassis ----Tipping body: * Steel pallet 3-way tipping body, continuous side walls, upper part with internal tube reinforcement – no central stanchions, foldable with drop-side spring assist * Bolt-on rear stanchions * Combination steel swing rear doors, 2-leaf asymmetrical design, can swivel and lock to 270° – non-foldable – with additional pendulum frame for automatic tailgate release during tipping operation, latching via galvanized rotary bar lock at the rear and central locking. Deactivation function for automatic tailgate when tipping backwards with open swing door * 4 mm high-tensile steel floor plate * Rear guide rail for loading ramps ----Load securing: * Each corner with 1 x 5 t lashing ring, 4 x 3 t lashing eyes per side integrated into outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres 285/70 R19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, folding supports at rear hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted in black * Side boards painted RAL 9010 pure white * Side walls can be painted in other RAL colours for an additional charge ----Information: * Reinforced body, with load securing certificate * Vehicle comes with day registration (not in use) * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 19.0: Bdjdpel Th Hwsfx Ai Esc ----Brakes: * Wabco EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: 2 x 10-ton BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalizer ----Drawbar / Flange coupling: Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Electrical system / Lighting: * 15-pole power connector * LED rear lights * TPMS (Tire Pressure Monitoring System) ----General components: * Jost support legs at the front * Outboard folding supports at the rear * Side impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm softwood flooring * Provision in front of the front wall for the subsequent installation of container locking devices * Bolted smooth-plate front wall * Steel side walls – trapezoidally profiled – foldable with side gate spring lifters * Steel rear wall, retractable between the ramps – bracket for storage when not in use, located inside in front of the front wall * Rear cross members, bolted ----Load securing: * Perforated outer frame, bent at approximately 45 degrees, with a lashing capacity of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * One 10-ton lashing point in each front and rear corner; various holes in the front and end cross members for 1.2-ton lashing * Profifix lashing rail in the longitudinal axis, centered, for lashing capacity up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 620 mm (can be retracted to 20 mm) * Approach angle at the rear, approximately 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Painting of the side gates in RAL 9010 pure white * Painting of the side walls in an RAL color is possible for an additional charge * Axles, springs, air tanks, flange coupling, and support legs painted in a black shade ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf near the A7 motorway

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Bdjdopk D D Hspfx Ai Eoc ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar ---- Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing gear at the front * External folding support legs at the rear * Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on chassis - loading height + 20 mm * 50 mm softwood floor in clamped design * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist * Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers ---- Ramps: * One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart) * Rear ramp slope approx. 860 mm ---- Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Side wall paintwork in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ---- Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ---- Delivery time: * Available immediately ex Egestorf

Condition: used, maximum load weight: 30,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 11/2002, Equipment: ABS, * MüllerMitteltal low-loader 4-axle T40 * 2x steered turntable axles * German trailer * Pen * Hydraulically adjustable ramps / left-right * Split foldable ramps * Extendable * ABS * BPW axles * 40 t * Unladen weight: 9,300 kg Bsdeyuri Eepfx Ai Esdc * Axle load: 10 t per axle * Fully functional * Tyres in good condition

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Bdjdpfx Aol Tnwzei Eec * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes Bjdpfxemi Tcqo Ai Esdc ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raise/lower function ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 volt ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drill rig transport on chassis * 50 mm softwood floor, clamped design * Fittings in front of bulkhead for subsequent installation of container locks * Bolted bulkhead of smooth sheet metal * Split side walls made of trapezoidal profiled steel sheet, foldable with central drop-in stanchion * Steel rear wall, retractable between ramps – storage bracket inside in front of bulkhead when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Load securing package: 1 x 10 t UVV lashing ring at each front and rear corner, 2 x 8 t UVV retractable lashing rings per side in the outer frame, various bores for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * Single-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Approach slope at rear approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paint Finish: * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * --- Axles, air tanks, flange eye, and landing gear painted in black --- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf Bdsdpfx Aismi Tmaj Eec

Condition: used, empty load weight: 6,400 kg, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 7,800 mm, loading space width: 2,500 mm, loading space height: 920 mm, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: inbound / in transit, 3 axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, hydraulic ramps, rear support, side aluminum underrun protection, twin tires Body: 3-axle low-bed trailer with hydraulic loading ramps, galvanized ramps, 3x 10t axles! Bdjdpfxsy R Ekio Ai Eec All information provided without guarantee as the vehicle is inbound! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0, 2 Loading Heights and Ramps Bjdoy R Ipujpfx Ai Esdc * Kingpin load increase from 12 t to 18 t included. Kingpin mounted in: second kingpin position 2", kingpin up to and including gooseneck 2,750 mm. Rear swing clearance approx. 2,400 mm (min. 150 mm clearance recommended). Front swing clearance 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance between tractor unit and trailer to be ensured by the customer. * Extendable components in the front and rear wheel wells (205 mm deep). 6 planks for wheel wells, bracket mounting as per code 09.112. ALU air tank instead of steel. * Smartboard control box mounted on the trailer as information tool with pressure sensors, finally for total axle load display. Indication possible either at the control box or in the truck via the EBS air suspension system (depending on truck manufacturer). * ?SP combination package: toolbox with 45° corners in galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the platform. W: 2,480 × H: 500 mm, with top hinged lid, side doors, and slanted left side. ALU side walls foldable to saddle platform (500 mm high), ALU rear wall insertable (150 mm high), inside and outside drop sides painted RAL 9006 white aluminum. Including foldable & removable rear stanchions, galvanized (without additional coating). Including bolted front structure. Length from front crossmember to gooseneck 3,935 mm. Front swing clearance, without spare wheel at gooseneck 2,450 mm or 2,750 mm approx. 1,750 mm or 1,480 mm. * 2 container locks, recessed in the front crossmember * 3 storage compartments under the platform for either ALU loading ramps or wooden planks for wheel well covers * Folding/extending outriggers (galvanized) and wooden planks for widening included (not on rear slope), plank bracket on the platform (maximum cargo track width 2,500 mm) * Second LED position light on the warning package (front and rear, dual lighting), only available with warning package * 2 LED reversing lights at the rear of the trailer, controlled via reverse gear (suitable for 12 V and 24 V), maximum 2 additional allowed in total * 7-pin socket at the rear, wired for overlength lighting with tail light (58 R) and ground * Rubber covering on left and right ramp slopes (approx. 860 mm long), 190 07644 rubber strips on the inside plank of the one-piece ramps * Fully automatic central lubrication system with pump (24V), grease container, and integrated trailer control, without connection to ramps (on steered version: including connection of distributor on platform). Note: Only compatible with towing vehicles with 24V lighting system! Subject to prior sale and errors! Sale exclusively under our general terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, such errors are due to transmission errors in the systems of different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal entitlement. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is given without guarantee and does not constitute a binding commitment.

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * KWH 9.9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Parabolic leaf spring suspension * Spring-assisted square tube supports at the rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm or 50 mm screwed towing eye (height-adjustable) * Mount for an additional drawbar, located on the right side (direction of travel) of the coupling device * Chassis made of torsion-resistant square tubes and crossmembers * Plastic toolbox Bdodpfx Aisy R Ipne Ejc * LED lighting * Swivel-mounted cable drum assembly consisting of base frame, rotary bearings, and drum supporting arms * Supporting arm ends with tension locks for drum shaft protection * Locking of the swivel-mounted cable drum frame to the chassis via a centrally positioned claw lock * Steel drum shaft 76 mm diameter with centering and rotating ends * For drum diameter 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic operated pull and push cylinders with load-holding valve * Control valve with automatic neutral position and pressure relief valve * Hydraulic connectors, hoses, and pipes in NW 13 * Required hydraulic oil capacity approx. 10 liters * Drum drive is hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed controller and brake for drum drive * Hydraulic pump unit with diesel engine and hand starter, 6.5 HP with gear pump (150 bar) * Pressure supply optionally via re-plugging connections either from truck hydraulics or from the pump unit * Cover for weather protection, hot-dip galvanized without topcoat * Tyres: 315/80 R22.5 Subject to prior sale and errors excepted! Sale is exclusively according to our General Terms and Conditions. Important note: Despite careful inspection of all details in our offer, errors may occur. Some may result from transmission mistakes in the systems of various platform providers. Therefore, all information is given without guarantee and does not constitute legal claims. Legal notice: This advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The details provided here are not guaranteed and do not constitute warranted characteristics.

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer Bdedpfswz H Nbjx Ai Eoc * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, maximum load weight: 6,000 kg, overall weight: 8,800 kg, axle configuration: 1 axle, first registration: 05/2026, Equipment: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and immediately available * Reference number for inquiries: 11652 * RDÜ Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic springs * Front support winch, rear spring-assisted square tube supports with baseplate, safety locking bolts for various support heights * Drawbar with 40 mm towing eye (height adjustable) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully enclosed steel fenders * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepped polyamide centering cones * For drum diameters 800-3,000 mm x (1,700 mm width between drum arms) * With tension lock to secure the drum at the support arm ends, and central claw lock for securing the cable drum mount to the chassis * Motor-hydraulic operated pull and push cylinders with pipe rupture protection. Control valve with automatic return to neutral, pressure relief valve, lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. * Additionally, hydraulic pump unit powered by Hatz 1B30 Silent Diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable via connection lines either from truck hydraulics or pump unit * Toolbox approx. 500 x 350 x 400 mm * Chassis with hot-dip galvanized drawbar * Advertising space integrated in side guard, exterior polyester-coated in RAL white Bdsdpfey Rb Tyex Ai Ejc * ----as new condition (used for only 1 project) * ---- * Financing available through our partners, with or without down payment or residual value, and various terms. Request your quote! * We are an authorized MüllerMitteltal dealer! * Example hire-purchase offer from our partner FM LeasingPartner starts at €515 net / month for 72 months (no down payment and "0" euro residual value). * Request your individual quote! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, English, Russian, Polish, and French ----

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalising unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent fitting of container locks * Bolted, 400 mm smooth-sheet bulkhead * Bolted rear stanchions * Side panels with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point each in the front and rear corners * Various drilled holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised * Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone * Side panels painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images ----Delivery time: Bedporwc R Ajfx Ai Eodc * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: Bdodpfxorwc R Rs Ai Ejc * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm high smooth steel bulkhead * Bolted rear posts * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approximately 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing points in the front and rear crossmembers * Profifix lashing rail, centered lengthways, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (collapsible to 20 mm clearance) * Hydraulic flow divider installed in trailer (for hydraulic pump flow from the truck exceeding 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to misprints and prior sale ----Delivery time: * Immediately available ex-works Egestorf

Condition: used, maximum load weight: 39,500 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 09/2010, next inspection (TÜV): 12/2026, loading space length: 9,345 mm, Year of construction: 2010, All prices listed in classifieds are gross prices and include the statutory VAT of 19%. Müller Mitteltal T50 Compact Low loader Ramps Tires: see pictures 5 axles Gigant axles Permissible total weight: 50,000 kg Unladen weight: 10,500 kg Payload: 39,500 kg Air suspension Immediately available Subject to errors and prior sale. Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: Bedpfx Aieyzlyxo Eedc We offer: - Net purchases for companies within the EU with a valid VAT ID number, as well as for customers from non-EU countries. - Leasing and financing options. - Handling of all customs formalities. - Issuance of temporary and export license plates. - Transport to port. All prices listed in classifieds are gross prices and already include the statutory VAT of 19%.