Used Müller-Mitteltal Trailers for sale (275)

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11-ton Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (the steering lock for the trailing axle can be activated from the cab for maneuvering purposes without truck-side installation, as well as additionally by a switch on the trailer); the lock must be deactivated before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent activation via EBS electronics ----Suspension: * Air suspension with lifting and lowering system, equipped with RtR valve Bdedpfx Ajl Tihusp Ioc ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye, manual height adjustment ----Electrical / Lighting: * Smartboard info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Fittings: * Mechanical warning sign package for 3 m overall width * Toolbox, galvanized steel, approx. 650 x 300 x 600 mm, mounted left side * Front plastic fenders and galvanized steel rear mudguards ----Low-loader Area: * Front of turntable platform with 45° corners and 3 storage compartments with lockable flaps (flap opens to rear) * Shortened low-bed platform by 500 mm to 6,280 mm including extended stepped drop by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and platform running surface * Bamboo wood insert between longitudinal members in front of excavator stick rest ----Load Securing (Load Securing Package): * 2 x 6.4 t lashing rings at the front corners * On each side, front and rear corners, 2 x 13.4 t UVV-compliant lashing rings * 5 x 10 t UVV-compliant lashing rings per side (pivotable, retractable, loadable in all directions) * 4 side stake pockets per side with 2 t lashing capability * 1 x 16 t UVV lashing ring on rear crossmember ----Widening: * Extendable and foldable outriggers for up to 3 m overall width (plank holders under chassis on right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforced profile from last axle to rear crossmember, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and adjustable ramp tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulic System: * Hydraulic flow divider (for hydraulic pump flow on truck from over 40 l/min up to 140 l/min max.) ----Loading Height: * Loaded: 890 mm +/- 20 mm by air suspension ----Loading Platform Dimensions: * Platform above fifth wheel: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on ramp ----Paintwork: * Chassis, turntable, drawbar, widening consoles, drive-on ramps – hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately *

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: Bodpfsxptn Dex Ap Isdc * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Spare wheel - Twin wheels = More information = Weights Empty weight: 8.900 kg Carrying capacity: 26.100 kg Bdodpfsxw T Uaex Ap Iec GVW: 35.000 kg Financial information Selling price: € 18.000, US$ 21.210 Other information Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: air Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: air Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: air Chassis: steel Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, axle configuration: 1 axle, first registration: 08/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS Bdjdpfxsxt Sl Nj Ap Isc = More information = Empty weight: 3.700 kg Carrying capacity: 9.300 kg GVW: 13.000 kg Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 03/2004, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - EBS = More information = Bdodpfx Apjxyx Has Isc Empty weight: 4.850 kg Carrying capacity: 13.150 kg GVW: 18.000 kg Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 04/2005, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.080 kg Carrying capacity: 13.920 kg Bedpfoxt Tf Rox Ap Iedc GVW: 18.000 kg Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 08/1996, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 2.360 kg Bdsdoxt Sd Ejpfx Ap Iec Carrying capacity: 10.640 kg GVW: 13.000 kg Purchase on credit is possible: Yes

Condition: used, empty load weight: 8,800 kg, maximum load weight: 31,200 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/1996, loading space length: 10,000 mm, loading space width: 2,510 mm, loading space height: 1 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, turntable, leaf suspension, extendable to 3m, lashing eyes, 2-piece loading ramps, hydraulic ramps, rear support, side aluminium underrun protection, twin tyres, storage box. Body: 4-axle low-loader trailer with hydraulic 2-piece loading ramps. Loading height approx. 900mm. 4x 10t SAF axles, drum brakes, 40mm and 50mm towing eye! Upper platform length approx. 2,900mm! Lower platform length approx. 7,100mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Bdedpfxsywvhro Ap Isc

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear Bodpex Ipa Nefx Ap Isdc * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalizer at rear * Side underrun protection * Swivel support legs at the rear on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender skirts, each with splash guards * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can be used for load securing * Load-securing package consists of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings to the side in the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm Bdjdpjx Ipavofx Ap Ioc * Load height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a shade of black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-bed Trailer / Drive-over Flatbed Trailer Enquiry No.: 27963, available end of March 2026 NEW VEHICLE incl. COC (Certificate of Conformity) * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Flatbed design with 400mm high front wall, ramp securing via ramp holding rods and diagonal supports * Version: 21t gross weight, reinforced frame and axle, axle spacing 1,810 mm * Bed height approx. 910 mm (loaded) / approx. 940 mm (unloaded) * 7,000 mm loading area with 400 mm high front wall * Extended ramps: 3,000 mm, hot-dip galvanized one-piece ramps with galvanized grating Bsdpfx Ajyuq R Usp Ijdc * Ramp lifters with vertically positioned, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop lashing rings (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame, positioned approx. 1m from the front and rear end beams * 10 UVV retractable lashing rings (LC 3,000 daN) recessed in the existing hole grid in the outer frame * 2 UVV lashing rings each front and rear, recessed in the end crossmember (LC 10,000 daN) * Additional lashing points via drill holes (Ø 50 mm, LC 1,200 daN) in the front and rear end crossmembers * Prepared for retrofitting container locks * 50mm thick softwood floor * Air suspension, Gigant axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) dual tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, right-hand side (in direction of travel) * LED lighting system * 7-pin socket at rear, wired for over-length lighting with rear light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning sign * 1 removable round LED beacon incl. holder and installation * Folding supports at rear, jockey wheel at front with gear winch ---- Lease purchase example from our partner MMV Leasing: €655/month net at 60 months without down payment and "0" euro final payment Other terms with/without down payment/final value possible! We are an official Müller Mitteltal dealer ----* Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Condition: used, maximum load weight: 10,960 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 03/2027, loading space length: 5,000 mm, loading space width: 2,500 mm, loading space height: 1,100 mm, total width: 2,550 mm, Loading length: 5,000 mm Width: 2,550 mm / Loading width approx. 2,500 mm Loading height: approx. 1,100 mm Further information: - Steel construction - Hot-dip galvanized - Aluminium loading ramps - Ramp storage compartment - 500 mm drop sides, foldable - Drop side springs - Gigant axles - Tyres 285/70R19.5 - Height-adjustable drawbar - Support legs front and rear Bodoytma Aepfx Ap Isdc - Plastic toolbox - Front access step

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering function and RtR valve * Smard on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at rear * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel and spare wheel holder, basket design, right side * Front: closed single fender made of plastic * Rear: straight steel mudguards with spray protection (anti-spray device) * Side underrun protection * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above turntable platform: 50 mm, in low-loader platform: 60 mm softwood * Outer planks of the ramp made from hardwood * 4 stake pockets on each side (no stakes included), each offering 2 t lashing option * Load securing kit consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform * Each front and rear side: 2 pairs of 13.4 t lashing rings on the outer frame, as well as 4 pairs per side of 10 t folding and lowerable lashing rings * Loadable from any direction and recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the side in the excavator arm storage * 8 pairs of galvanized folding outriggers for 3 m overall width (not at the rear slope) * Widening planks stowed on the left in a storage compartment * Excavator arm storage above the rear axle up to end of access slope approx. 2,100 x 740 x 190 mm * Mechanical rear drop supports * Hydraulic folding ramps with hydraulically adjustable tapered section, approx. 4,650 x 720 mm, incl. hydraulic side ramp displacement & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded platform height: approx. 890 mm, +/- 20 mm (including 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black Bdsdpol Tphrefx Ap Isc * Tires: 235/75 R 17.5 * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side Bdedol Tik Nopfx Ap Isc * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Condition: used, maximum load weight: 17,290 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 07/2026, loading space length: 8,900 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS * 5-chamber tail lights * Orange rotating beacon * Duomatic air coupling Bdsdoyulu Uspfx Ap Ioc * BPW ECO axles ----Superstructure: Low-bed trailer, galvanized frame (1900+7000mm)/loading height approx. 900mm, rear end sloped/loading ramp height approx. 770mm, steel/wooden floor, extendable to 3 meters, hydraulic drive-on ramps (galvanized) with anti-slip coating, ramps also hydraulically side-shiftable, lashing rings Sale only to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice for details).

Condition: used, machine/vehicle number: GE11/142/2022, empty load weight: 6,350 kg, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2008, loading space length: 8,500 mm, loading space width: 2,500 mm, suspension: air, Very well-maintained vehicle from first owner Three-axle low-loader trailer Low-loader with drive-up ramp Bdodpon Aw Hkjfx Ap Isc Heavy-duty transport Model T3 Komakt 30.0 Length 8,500 mm Width 2,500 mm Air suspension Commercial/export net price – €15,990 Subject to changes, interim sale, and errors ===== Phone2 Mobile =====

Condition: used, first registration: 06/2011, total width: 25,500 mm,

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Bsdpfx Apoyncyhs Iodc Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no in-truck installation required) * 15-pin power connector * LED rear lights 12/24 V * Removable LED beacon at the rear ----General Accessories: * Support winch at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Area: * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of profiled steel sheet, foldable with side wall spring lifters * Steel rear wall insertable between the ramps – storage bracket inside at the front wall when not in use * Removable bolted rear stanchions * Inclined access ramp at rear, approx. 860 mm ----Floor Covering: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the access slope and externally on the lowbed platform (from front to rear cross member) Bedex Ipapopfx Ap Ijdc ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation option for 3 t folding lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Multiple holes in front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 870 mm (retractable to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Vehicle is immediately available

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Bdedpfx Apsx Ipbaj Iec * Parabolic springs with compensating aggregate ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display option via EBS signal (no installation on truck required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Rear LED beacon (removable) ----General Attachments: * Support crank at the front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Bed Deck: * Fixture in front of bulkhead for retrofitting container locks * Bolted smooth-sheet bulkhead * Drop sides made of steel sheet, trapezoidal profile, foldable with drop side spring lifter * Steel tailgate, stowable between ramps - bracket for non-use inside, in front of bulkhead * Bolted rear stanchions * Rear incline approx. 860 mm ----Floor Covering: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strip on inner side of loading ramps * 12 mm thick, 210 mm wide rubber strips in the rear incline and outer area of low bed platform (from bulkhead to rear cross member) ----Load Securing: * Slotted external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In the front and rear corners, 1 x 6.3 t lashing ring each * Various holes in the bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (adjustable down to 20 mm spacing) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white ----Additional Information: * --Reinforced and certified bodywork to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Lead Time: Vehicle available immediately ex Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference number for enquiries: 11612 * NEW VEHICLE, available immediately in RAL 9016 (traffic white), no prior registration * Delivery to your door available for an additional charge! * Gross vehicle weight: 11,900 kg, Payload: 8,750 kg * Galvanized floor 5m x 2.42m x 0.5m, side walls pendulum-mounted, foldable, and removable, prepared for later retrofitting with side board extension kits * Bulkhead/h front wall hot-dip galvanized * Lockable compartment under tipping platform for loading ramp * Includes 3.31m loading ramps, 8t pair * 4 UVV tie-down rings LC 5000daN, located at front and rear * 8 recessed, foldable lashing eyes LC 3000daN in the tipper floor (centered) * Net hooks * Stepless height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Galvanized frame * Tyres: 235/75R 17.5 (4 units), BPW axles, parabolic springs * Tire pressure monitoring system * EBS (Electronic Braking System) * LED lighting system for 12V and 24V * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on front wall Bjdpfoyl Ebpjx Ap Iedc ---- Please request a detailed offer; additional equipment available upon request Financing available from only €405 (net) per month, 72 months term, no down payment, no residual value. An offer from our partner 'FM LeasingPartner.' ---- Our office hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of office hours, viewings by appointment. WhatsApp Leasing, financing, and trade-in possible----

Condition: used, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 08/2026, loading space length: 4,800 mm, loading space width: 2,430 mm, loading space height: 500 mm, Equipment: ABS, Müller-Mitteltal low-loader tipper - Low-loader and two-way tipper combined in a single vehicle - 40 mm towing eye - Air brake system - Support legs for loading and unloading - Gigant axles Bedpfx Asyk Rfksp Ijdc - Tyres: 235/75 R 17.5 - Drum brakes - Unladen weight: 3,620 kg - Height-adjustable drawbar - TÜV due: 08.2026 - Safety inspection (SP) due: 02.2026 - Loading area length: 4,800 mm - Loading area width: 2,430 mm - Side wall height: 0.5 m Errors and prior sale excepted. Internal vehicle number: 11349.

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V Bdodpfswb Rakex Ap Iec * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged Towing Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable rear supports * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for the retrofit of container locks in front of the front wall * Bolted smooth steel front wall * Fold-down sidewalls made from trapezoidal steel sheeting with board hoist * Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use * Bolted rear stakes * Rear slope approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various 1.2 t lashing options in the front and rear cross-members ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Sideboard color in RAL 9010 pure white * Sidewall painting in another RAL color available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- Bdjdpfx Ajpk Dv Rjp Iec * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Braking system: * EBS electronic braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow bar / Flange eye: * Tow bar height-adjustable by 300 mm * Tow bar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (tyre pressure monitoring system) * LED tail lights 12 / 24 V * 15-pin power connector Bdodpfx Asq Dyvyep Ijc ----General attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fittings in front of bulkhead for retrofitting container locks * Bolted flat sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs * Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember ----Ramps: * One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps * Sideboard colour in RAL 9010 pure white * Painting of side walls in alternative RAL colours available at extra cost ----Info: * --Reinforced and certified body built according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf