Used Müller-Mitteltal Trailers for sale (271)

Condition: used, empty load weight: 3,500 kg, maximum load weight: 9,500 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 11/1993, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, 2 axles, tandem axle, leaf spring suspension, lashing eyes, side guards, front supports, swing-out tailgates. Giedozgu Sfepfx Ahbsw Superstructure: Tandem 3-way tipper trailer. Spare wheel available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, German trailer, * 30-ton capacity * Extendable to 3 meters Godpfjy Trntex Ahboiw * Spring-loaded ramps * 50mm drawbar eye * Air suspension New TÜV (technical inspection) available for an additional charge!!! For further information, please call Christian Bredemeier.

Condition: used, empty load weight: 3,280 kg, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2013, suspension: air, tire size: 265/70 R19,5, wheelbase: 5,030 mm, Equipment: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | Disc brake BPW | TÜV valid until | Errors, input and advance sales reserved. Giodpfx Aswd Sdcshbsw

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, next inspection (TÜV): 08/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock No. 5820 Müller-Mitteltal 3-sided steel tandem tipper trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13.5 * First registration: 08/2017 * Gross vehicle weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes * Suspension: leaf spring suspension * Tires: 385/55 R 19.5, approx. 50% tread, on steel rims * TÜV (technical inspection): 08/2026 * EBS * Color: galvanized chassis, blue tipper body Giedpfx Ahszdm S Sebow * Tipper interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipper body with 4 pairs of folding lashing eyes in the floor * Front support for full load * Additional supports at the rear (folding) * Front toolbox on the right side * Quarter fenders * Load securing certificate * 1st owner German trailer !! German documents !! 1st owner !! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the details. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Spare wheel - Twin wheels = More information = Weights Empty weight: 8.900 kg Carrying capacity: 26.100 kg GVW: 35.000 kg Financial information Selling price: € 18.000, US$ 20.890 Other information Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: air Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: air Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: air Chassis: steel Gedpfxexw T Uaj Ahboiw Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, maximum load weight: 9,050 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 10/2026, loading space length: 5,500 mm, loading space width: 2,430 mm, loading space height: 1,100 mm, total width: 2,550 mm, Total weight: 11,900 kg Unladen weight: 2,850 kg Payload: 9,050 kg Overall length: 7,400 mm Loading length: approx. 5,500 mm Giedpfx Ahjzc Dnvsbjw Width: 2,550 mm / Loading width approx. 2,430 mm Loading height: approx. 1,100 mm Further information: - Drawbar adjustable in height - Front support leg adjustable in height - 800 mm side boards + folding tailgate - Side boards split, Kinnegrip K20 - BPW axles - Air suspension - Wheel chocks The vehicle may be fitted with advertising and/or lettering.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 10/2013, total width: 2,750 mm, Year of construction: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic low loader platform | 48 t permissible total weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for the transport of machines, construction equipment, and heavy-duty equipment. It is known for its robust design and reliability. Technical data: Make: Müller Mitteltal Type: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible total weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible roll-on load: 18,000 kg Loading platform: Low loading platform (low loader design) Loading ramps: hydraulically operated Low loading platform: hydraulically adjustable (up/down) Tires: in good condition Construction: All-steel chassis Maximum speed: 80 km/h Design & Options: Heavy-duty low loader design Hydraulically adjustable low loading platform (up/down) Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is used but functional and shows signs of wear and tear consistent with its age and use. Technically, it is a robust and reliable machine transporter. Ready for immediate use – ideal for transport companies and construction firms. For more information or to arrange a viewing, please contact us. = Further Information = Gsdpfx Aezc E Nnohboiw Axle configuration Rear axle 1: Double-tired; Max. axle load: 10,000 kg; Steered Rear axle 2: Double-tired; Max. axle load: 10,000 kg; Steered Rear axle 3: Double-tired; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 14,500 kg Payload: 33,500 kg GVW: 48,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 02.2027 Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Henk Gerrits, Klaas Gerrits or Mr. Gerrits for further information.

Condition: used, maximum load weight: 7,950 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 08/2010, next inspection (TÜV): 02/2026, loading space length: 6,000 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 3,050 kg Payload: 7,950 kg Overall length: 8,100 mm Loading length: total approx. 6,000 mm Width: 2,550 mm / loading width approx. 2,470 mm Loading height: 900 mm Additional information Gjdpfsx E I Utsx Ahbeiw - Height-adjustable drawbar - Support leg - 400 mm drop sides, spring-mounted - E-wheel - BPW axles - Spring ramps with grating, laterally adjustable - Climbing strips, rear stabilizer - Large lashing package

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 05/2026, loading space length: 6,250 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Further information 400mm fold-down sideboards Gsdjy Hn D Rjpfx Ahbeiw - Spring-assisted sideboard lifters - Removable rear wall - Large lashing package - Perforated load bed rail - Height-adjustable front support leg - Foldable rear support legs - Plastic toolbox - BPW axles - Spring mesh ramps

Condition: used, maximum load weight: 13,640 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2019, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, total width: 2,500 mm, HU: NEW Gross weight: 18,000 kg/20,000 kg Unladen weight: 4,360 kg Payload: 13,640 kg/15,640 kg Additional information - Twin tyres 235/75R17.5 - Gigant axles - 4 pairs of lashing rings - Pneumatic locking - Lowerable turntable chassis - Loading ramps approx. 2,300 mm in storage compartment - Rear support leg - Storage box - Underrun protection Gisdpoyw Ep Sefx Ahbsw

Condition: used, maximum load weight: 7,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/2007, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Vehicle / Body: Tandem three-way tipper First registration: 07/07 Gross weight: 10,000 kg Unladen weight: 2,900 kg Payload: 7,100 kg Overall length: 6,900 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Additional information - 40 km/h - 500 mm side walls Gedpsyz H Azjfx Ahbeiw - 500 mm galvanized front extension - 7 pairs of lashing rings on loading area - 4 pairs of lashing rings on exterior underbody - Support leg - Rear support - Drop side lifting spring - Drive-on ramps optional at €1,280.00

Condition: used, maximum load weight: 10,100 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 03/2001, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,460 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 13,500 kg Gedpfow Nu I Tox Ahboiw Unladen weight: 3,400 kg Payload: 10,100 kg Overall length: 8,100 mm Loading length: 6,000 mm Width: overall width 2,550 mm / platform width 2,460 mm Loading height: approx. 1,000 mm Further information - Tyres: 285/70R19.5 - Side walls 400 mm, split 1x

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information New: No Gijdpfx Asvy Tvtehbow

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with many extras Equipment includes: - 2 spring-assisted lifting devices for 400 mm high steel side walls - Reinforced and certified construction according to EN 12642 XL load securing certificate - 10 UVV lashing rings integrated into the existing external frame hole pattern - Additional wooden floor in clamped design - Tyres: 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm, total length 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Gijdpfexcxmfox Ahbow Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stanchions/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are happy to offer you suitable financing, hire purchase or leasing options. Delivery or shipping by arrangement. We always have a selection of new machines in stock, as well as demonstration units. Contact us today! We rent vehicles and machines with or without operator. A wide range of used machines and equipment always available. Technical changes, errors and prior sale excepted.

Condition: used, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 12/2011, next inspection (TÜV): 09/2026, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Further information: - Ramp covered with grating - Spring-loaded ramps - Foldable support legs - LED reversing lights - Side board springs - BPW axles - Side boards 400mm - Overall length 6,000mm including rear overhang approx. 1,100mm Giodpfxozb Ua Ts Ahbew

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs Gisdpfxjxb Ig Sj Ahbew ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles Giedjxb Iglepfx Ahbew All information is provided without guarantee / subject to prior sale.

Condition: used, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2019, Equipment: ABS, * Müller Mitteltal 3-axle trailer for demountable containers * Model TM 2 24 * For two demountable containers from 7 to 10 m³ * Load securing with only two chains per container * Twin tyres 265/70 R19.5 * Air suspension * BPW axles * Turntable drawbar pneumatically lowerable with pneumatic release * 8 UVV lashing rings (5t) for attaching tensioning elements * 8 adjustable container stops for lateral centering of containers * EBS * Technically permissible gross weight 27,000 kg Gijdsyx R Enopfx Ahbjw

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lift and lowering system, including RtR valve and manual lowering for loading processes ----Drawbar / Flange Drawbar Eye: * Drawbar with force-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Three-way tipper platform made of high-strength steel with high M-Strong side boards and reinforced 180 bar tipping cylinder * Fixed smooth sheet steel front wall * Hardwood pad for excavator bucket, bolted to front wall * Continuous side walls (no central stanchion), foldable with board spring lift and swiveling via manual central locking * Rear stanchions bolted * Combination steel tailgate—2-winged, asymmetrically split, swiveling by 270° and lockable (not foldable), with additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized turning bar lock and central locking. Deactivation function for automatic tailgate opening when tipping backwards with opened tailgate. * 4 mm steel floor plate * Two-step access on front left * Ramp holder at the rear for drive-on ramps ----Load Securing: * Each corner equipped with 1 x 7 t lashing point * Each side equipped with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: Godpfxsvin Uco Ahboiw * Recessed storage compartment in the chassis at the rear for ramps * 1 pair of aluminum drive-on ramps (10 tons/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun protection, and rear folding supports hot-dip galvanized * Side wall paintwork in any RAL color of choice (no special or metallic finishes), color may be changed up to approx. 6 weeks before completion * Axles, air reservoirs, flange drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at front * External foldable support legs at rear * Plastic toolbox on the front right outside, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * LED lighting ----Loading Platform: * Loading area 5.37 m * 50 mm softwood floor * Bolt-on bulkhead made of flat sheet metal * Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner, one lashing ring, 6.3 t each * Various holes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm from chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: Giedpfxsl Th Nce Ahbjw * Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade * Side wall paintwork in RAL2011 deep orange * Custom color paintwork for side panels available for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) Gjdpfol Tnu Ajx Ahbjiw * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 to. Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid lowering valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin electrical connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General components: * Pressure gauge - pressure indicator for determining payload (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mech. adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash guard * Rear straight, galvanized steel side skirts with splash guard * Reflective contour strip on the side and rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-loader platform: * Extension in front of the turntable platform approx. 490 mm long with 45° corners * ROBOTER welded anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-loader platform ----Load securing (La-Si package consisting of): * 1 x 13.4 to. UVV lashing eye to the left and right in front of the front bulkhead beam * 4 holes on each side in the turntable platform, each with a lashing force of 2 to. * 1 pair of lashing eyes (13.4 to.) hanging at the rear left and right in front of the rear beam * 4 pairs of UVV lashing rings (10 to.) on each side, swiveling and lowering, capable of withstanding loads in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2 to. lashing option ----Widening package: * Hot-dip galvanized mech. folding outriggers for 3 m overall width (however, not in the rear slope) * Beam holder for widening under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end beam approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 to. lashing eyes on each side in the excavator arm rest ----Ramps: * Hydr. one-piece access ramps (approx. 3,000 x 720 mm) mech. adjustable on the side * Outer planks of the access ramps made of hardwood * Steel structure as preparation for a 6-way control valve ----Loading height: * Unladen loading edge approx. 950 mm +/+ 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Chassis, turntable, folding outriggers, mech. support legs, access ramps hot-dip galvanized * Axles, air tank, drawbar painted in a black tone ----Information: * Vehicle has a day registration in 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raising/lowering function and RtR valve * Smart-Board as infotool * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * FRP full front wheel arches and rear straight galvanized steel skirts, both with splash protection * Reflective contour tape at sides and rear * Foldable (hot-dip galvanized) toolbox lid on the bogie platform * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin power connector * Four stake pockets per side, each with 2 t lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the frame of the bogie platform, 5 pairs of UVV lashing rings—swiveling and lowerable, loadable in all directions, recessed into the outer frame—corners rated 13.4 t, elsewhere 10 t Gsdpfx Ahsl Tq Eujbeiw * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Extension planks stowed in the loading area center * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest over rear axle up to end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach ramp) * Chassis, bogie, drawbar, folding extensions, and loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. week 32 / 2026 * Sample images

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including RtR valve and manual lowering option for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-fit height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V electrical system * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing gear at the front * Outward folding support legs at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: Giedjvin T Sspfx Ahbow * Steel pallet 3-way tipper body made of fine grain steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth sheet metal * Hardwood battens for bucket support mounted on the front wall * Continuous sidewalls – without centre stanchion – foldable with drop side spring lifter and swinging mechanism via manual central locking * Bolted rear posts * Combined steel wing door rear wall, two-part, split asymmetrically, swingable up to 270° and lockable, not foldable. Includes additional swinging frame for automatic tailgate opening when tipping; locking via galvanized rotating bar lock and central locking. Deactivation function for automatic tailgate opening when reverse tipping with open wing door * 4 mm steel floor plate * Two-step step on the left front * Ramp mounting rail at the rear ----Load Securing: * Each corner fitted with 1 x 7 t lashing ring * Each side equipped with 4 x 3 t lashing eyes recessed in the outer frame ----Loading Ramps: * Ramp mounting compartment integrated at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, and rear folding supports hot-dip galvanized * Drop side paint finish in any RAL color shade of your choice (special or metallic paints excluded); color can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45/2026

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye Giedpfxjpk D D Ue Ahbow ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged Towing Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable rear supports * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for the retrofit of container locks in front of the front wall * Bolted smooth steel front wall * Fold-down sidewalls made from trapezoidal steel sheeting with board hoist * Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use * Bolted rear stakes * Rear slope approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various 1.2 t lashing options in the front and rear cross-members ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) ----Paintwork: Gsdpepk Dv Rjfx Ahbeiw * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Sideboard color in RAL 9010 pure white * Sidewall painting in another RAL color available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf