Low loader trailerMÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Low loader trailer
MÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Fixed price plus VAT
€46,900
(€55,811 gross)
Year of construction
2024
Condition
New
Location
Egestorf 

Basic data
- Description:
- Low loader trailer
- Manufacturer:
- MÜLLER-MITTELTAL
- Year of construction:
- 2024
- Condition:
- new
Price & Location
Fixed price plus VAT
€46,900
(€55,811 gross)
- Seller location:
- Eichenstich 12, 21272 Egestorf, Germany

Call
Technical details
- Maximum load weight:
- 16,000 kg
- Overall weight:
- 21,000 kg
- Axle configuration:
- 2 axles
- Loading space length:
- 5,500 mm
- Loading space width:
- 2,420 mm
- Loading space height:
- 700 mm
Details about the offer
- Listing ID:
- A154-46-713
- Reference number:
- 6248a
- Update:
- 11.06.2026
Description
* KA-TA-RT 21.0 ML
----Brakes:
* Without ABS/EBS, approved for 40 km/h
* Spring brake parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem equalizer with 100 mm wide parabolic springs
----Drawbar/Drawtube:
* Fixed welded drawtube with low-maintenance cap for K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate) with a high-mounted gantry for the connection lines
----Electrical System/Lighting:
Giodor Dpz Hjpfx Aguou
* 12 V, 7 + 4-pole power cable
* LED lighting system 12/24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
----General Components:
* Front support jack
* Mechanical drop-down supports at the rear
* Side marker lights with turn signal control
* Plastic quarter fenders
* Plastic toolbox, approx. 750 x 350 x 300 mm, on the right side
* Hot-dip galvanized, two-step access ladder in front of the front panel (FR, left)
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel pallet-sided 3-way tipping body with M-Strong side walls (front wall fixed, continuous side walls – without center rails – pivoting via manual central locking as well as mechanically foldable with side wall spring lifters)
* Hydraulic tailgate, 500 mm high, as a hydraulic dump gate with a 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 x 7 t lashing points each in the corners - recessed and foldable
* 4 x 3 t lashing points each on the sides - recessed and foldable
----Ramps:
* 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for vehicles with rubber tires and tracked vehicles
* 2 storage compartments for aluminum loading ramps, recessed in the rear of the chassis, load securing according to EN 12642 XL
----Coupling Height:
* Loaded approx. 530 mm & unloaded approx. 590 mm
----Painting:
* Body paint in RAL 9010 pure white
* Chassis, drawtube, rear drop-down supports, underrun protection, hot-dip galvanized
* Axles, air tank, front support jack
* K80 coupling painted in a black tone
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery Time:
* Immediately available from Egestorf
The listing was translated automatically. Translation errors are possible.
----Brakes:
* Without ABS/EBS, approved for 40 km/h
* Spring brake parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem equalizer with 100 mm wide parabolic springs
----Drawbar/Drawtube:
* Fixed welded drawtube with low-maintenance cap for K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate) with a high-mounted gantry for the connection lines
----Electrical System/Lighting:
Giodor Dpz Hjpfx Aguou
* 12 V, 7 + 4-pole power cable
* LED lighting system 12/24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
----General Components:
* Front support jack
* Mechanical drop-down supports at the rear
* Side marker lights with turn signal control
* Plastic quarter fenders
* Plastic toolbox, approx. 750 x 350 x 300 mm, on the right side
* Hot-dip galvanized, two-step access ladder in front of the front panel (FR, left)
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel pallet-sided 3-way tipping body with M-Strong side walls (front wall fixed, continuous side walls – without center rails – pivoting via manual central locking as well as mechanically foldable with side wall spring lifters)
* Hydraulic tailgate, 500 mm high, as a hydraulic dump gate with a 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 x 7 t lashing points each in the corners - recessed and foldable
* 4 x 3 t lashing points each on the sides - recessed and foldable
----Ramps:
* 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for vehicles with rubber tires and tracked vehicles
* 2 storage compartments for aluminum loading ramps, recessed in the rear of the chassis, load securing according to EN 12642 XL
----Coupling Height:
* Loaded approx. 530 mm & unloaded approx. 590 mm
----Painting:
* Body paint in RAL 9010 pure white
* Chassis, drawtube, rear drop-down supports, underrun protection, hot-dip galvanized
* Axles, air tank, front support jack
* K80 coupling painted in a black tone
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery Time:
* Immediately available from Egestorf
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Last online: A week ago
Registered since: 2001
170 listings online
Send inquiry
Telephone & Fax
+49 40 33... show
These listings may also fit your interest.
Your listing has been deleted successfully
An error has occurred


























































































