Used Müller-Mitteltal Ra Trailers for sale (237)

Condition: used, overall weight: 14,400 kg, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, first registration: 07/2011, next inspection (TÜV): 08/2024, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ceheth Uavsx Dnk Tegt - .

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,500 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 900 mm, first registration: 03/2019, next inspection (TÜV): 07/2025, total width: 2,550 mm, total height: 2,650 mm, Equipment: ABS, 3-sided tipper body, 5 pairs of lashing eyes recessed in the floor, roller tarpaulin, towing eye 50 mm, ABS, EBS, GIGANT axle(s), drum brake system, air suspension, Jost support winch, vehicle can be fitted with advertising and/or lettering Cgshx Deu Uallsnk Tet Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, overall weight: 18,000 kg, maximum load weight: 14,000 kg, axle configuration: 2 axles, loading space length: 6,800 mm, first registration: 10/2013, Year of construction: 2013, total width: 2,550 mm, total height: 1,400 mm, Equipment: ABS, ABS, EBS, automatic slack adjusters, 2x 10 to. axles (BPW), air suspension, drum brake, spring-loaded brake on the rear axle, pneumatically lowerable drawbar, release valve on the front axle, ratchet tensioner, hydraulic side clamp, closed storage box, two reversing lights, net box, spare wheel holder, closed side underride guard, fixed rear underride guard, rear skirt on the underride guard, folding A-plate, container size 2x10 cbm ASK skip. Cgshx Dnjuzdm Aek Tot Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, mobile cranes and working platforms... Talk to us! Would you like financing? We will be happy to provide you with a non-binding financing offer. The offer is subject to change, without guarantee or warranty. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. There is no reservation or entitlement to availability until payment has been received. The purchase is only concluded upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been received. Payments are only accepted in euros without additional costs for the seller and only by bank transfer or cash payment. No checks.

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 tandem? Low loader? Plateau? Trailer No. for inquiries: 23112 Available week 20/2025 Delivery to your address possible!---- * Gross vehicle weight: 14.4t, NL: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring (RDÜ) * 6.27m x 2.47m platform with 400mm galvanized bulkhead * Hardwood excavator bucket rack bolted to the bulkhead * Ground height unloaded: 930mm / loaded: 870mm * One-piece ramps with hot-dip galvanized anti-slip gratings, collapsible to approximately 20mm, secured by retaining rods and inclined supports * Ramp jack with vertical, adjustable springs for easy loading One-person operation. * 4 UVV-compliant drop lashing brackets (LC 6300 daN) * Internal main frame, perforated outer frame (45° beveled with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashing brackets LC 3000 daN at spacing of approx. 600 mm possible) with narrow cross-section, high-web front and rear closures, and rear ramp, hot-dip galvanized. * 10 UVV-compliant lashing brackets (LC 3000 daN) can be recessed into the existing hole pattern in the outer frame, additionally * Additional lashing options via holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Toolbox in front of the bulkhead * Side marker lights with indicator control * Softwood floor, 50 mm frame, hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear. * Height-adjustable drawbar with 40 mm drawbar eye (hot-dip galvanized), also available with 50 mm eye upon request * 1 removable LED beacon at the rear * Preparation for the installation of 2 container locks recessed into the front beam. * ---- * Leasing, hire purchase, financing, and trade-in are available * e.g., €510 for a 60-month term with no down payment and no residual value * We are a MüllerMitteltal retail partner * ---- * Our opening hours * Mondays - Thursdays: 8:00 a.m. - 5:00 p.m. * Fridays: 8:00 a.m. - 3:00 p.m. We are available outside of opening hours by appointment. Cgshx Dnsv Hvnxok Tet We speak German, we speak English, we speak Polish, and we speak French.

Condition: used, overall weight: 21,000 kg, maximum load weight: 16,180 kg, axle configuration: 2 axles, first registration: 11/2018, next inspection (TÜV): 12/2025, total width: 2,550 mm, Equipment: ABS, tail-lift, - Wooden floor in clamped design - Larch/Douglas fir and hardwood flooring - Twistlock on the front - Duomatic braking system - Air suspension - EBS with manual lowering - EBS plug connection ISO7638 - Floor height approx. 910mm loaded - Floor height approx. 940mm unloaded - Gratings, hot-dip galvanized ramps - Manual, no hydraulics required!! - Plastic toolbox - Loading height +20mm Cgjhx Dnsv H Izdjk Tot - Divided side walls with foldable center stanchions - Platform extension to 7,000mm - 21 ton version with reinforced frame - Reinforced axle - 4 UVV fall lashing brackets - Jost support - Warning sign that can be pulled out for wide transport

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TA-ER 14.4 Plateau: * RDÜ (tire pressure monitoring) Cehx Dnksv D Tbdo Tsgt * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. Warning sign packages at the front and rear * Drawbar height adjustable by 300 mm with 40 mm flange drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic tool boxes approx. 750 x 350 x 300 mm on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fender * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights. at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 400 mm high screwed front wall * 50 mm softwood floor, * 2 pairs of container locks (extendable to 3 mtr. Cont. external width) and lockable, locking dimension pushed in according to ISO - DIN 15190 = 2,259 mm. Cont. locks pulled out = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm * perforated external frame bent at approx. 45 degrees with 2 ton. lashing force every 480 mm, installation of 3 ton. drop lashing brackets every 600 mm possible - 5 x 3 ton. UVV lashing brackets installed on each side -, 1 x 6.3 ton in the corners at the front and rear. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the back in the end beam), various holes in the front and end beam for 1.2 ton lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 ton / pair) suitable for rubber-tired and tracked vehicles * storage compartment below the loading area in the chassis from the rear * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, support winch at the front and flange drawbar eye painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf on the A7

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, Year of construction: 2025, Tandem low loader ETÜ-TA-R 11.9/024? Can be driven over Technical data: - Technical total weight: 11,900 kg - Permissible total weight: 11,900 kg - Payload (series): approx. 8,770 kg - Internal dimensions (L x W x H): 6,270 x 2,470 x 400 mm - Tires: 235/75R17.5 Paintwork: - Structure (side walls): RAL 2011 deep orange - Chassis, front wall, ramps: hot-dip galvanized - Axles, air tank: black - Wheels: silver (The payload information refers to the standard equipment without options. Options can increase the dead weight and reduce the payload. Weight tolerance ±5%.) Equipment: - 2 spring jacks for 400 mm high steel side walls - Platform extension by 870 mm to a total of 6,270 mm - Reinforced & certified structure according to EN 12642 XL incl. Load securing certificate up to 15 t - Wooden floor in clamped design - BPW axles for maximum stability - Anti-slip, hot-dip galvanized gratings instead of spruce/fir (without top coat) - 10 UVV lashing brackets (LC 3000 daN) retractable in the existing hole pattern of the outer frame - Tool box made of plastic (black, lockable) ? Dimensions: 858 x 500 x 500 mm, max. load 45 kg (with even loading), mounted in front of the front wall on the right in the direction of travel Other information: - Trade-in and purchase of vehicles and machines possible. - Sale price excludes transport - No liability for printing and typing errors. - Errors, changes and prior sale reserved. - Offer subject to change. - Photos may vary. Price applies to current condition. - All information without guarantee. Cgehx Dnkev Dlm Ee Tot

Condition: used, overall weight: 10,500 kg, maximum load weight: 7,550 kg, axle configuration: 2 axles, loading space length: 4,460 mm, loading space width: 2,200 mm, loading space height: 1,100 mm, first registration: 08/1998, next inspection (TÜV): 08/2025, total width: 2,400 mm, Vehicle number: 24542 Vehicle / Body: Tipper First registration: 08/98 HU: 08/25 Total weight: 10.500kg Unladen weight: 2,950kg Payload: 7,550kg Overall length: 6,500mm Loading length: approx. 4,460mm Width: 2,400mm Loading height: approx. 1,100mm Further information - Parabolic suspension - Side walls 600mm, foldable/removable - Loading width approx. 2,200mm Cgohx Dnevi D Swsk Tet - LED reversing light - Dropside lifting aid - BPW axles - Wheel chocks - 4 lashing eyes in loading area - Folding rear support Optional aluminum ramps ¤ 1,280.00/net Vehicle may have advertising stickers, lettering and/or lettering residue.

Condition: used, overall weight: 32,000 kg, maximum load weight: 25,230 kg, axle configuration: 2 axles, first registration: 06/2012, Equipment: ABS, Müller Mitteltal 2-axle concrete semi-trailer type SF32 BM/BT Body type: HTM 1004 Liebherr 10 m³ from year of construction 2012, BPW axles, drum brakes, air suspension, lift axle, underride guard, EBS, ABS 1st hand inspection book Permissible total weight: 32000 KG Unladen weight: 6770 KG Cshx Derdt H Eonk Tsgt

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,750 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Müller Mitteltal KaTaR 19 Tandem - three-way tipping trailer, aluminum side walls and roll-up tarpaulin * NEW VEHICLE without first registration, available at the beginning of May 2025 Number for inquiries: 18530B * can also be ordered from us in your RAL color and equipment * the chassis can also be painted in your desired color or galvanized for an additional charge * Please request a quote from us!---- * GG: 19t, NL: 14.75t * EBS * Structure aluminum side walls asymmetrical, continuously 900mm high * Front and rear wall 900mm high made of steel * 4,995mm x 2,380mm x 900mm in RAL 9016 traffic white Cgehx Dsvudfzenk Tst * 2 spring jacks for side walls * 4 pairs of lashing eyes recessed in the 5mm thick steel floor and foldable LC 3000 daN * 2 x 9t SAF axles with disc brakes * 1t support load, with correspondingly increased payload * Air suspension 385/65R 22.5 with tire pressure monitoring * Underrun protection foldable and galvanized for paver loading * Drawbar with 50mm eyelet adjustable +77mm/ +33mm * LED lighting with flashing side marker lights * Front support leg with winch * 2 LED reversing lights * Front wall platform made of grating with access step and handles on the front wall * Roll-up tarpaulin for the tipper on the right in the direction of travel * ---- * Hire purchase example from our cooperation partner FM LeasingPartner 665 euros net for 60 months with no down payment and no residual value. Other terms with / without down payment / residual value possible ----* Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of opening hours we are available by appointment * we speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, trade-in possible

Condition: new, overall weight: 24,000 kg, maximum load weight: 18,900 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * RDÜ (tire pressure monitoring system) * 3 x 11 tonne Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * LED tail lights * 15-pin power plug * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible * 8 removable trough stops for lateral centering of the troughs, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible Cgehx Detplv Tenk Tot * Axles, turntable, towing scissors and air tank painted in a black tone * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available from week 23/2025

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,060 kg, axle configuration: 2 axles, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, first registration: 02/1990, next inspection (TÜV): 03/2025, total width: 2,500 mm, Vehicle number: 24554 Cgshx Doviqm Uonk Tjt Vehicle / Body: Tipper First registration: 07/90 HU: 03/25 Total weight: 18.000kg Unladen weight: 4,940kg Payload: 13,060kg Overall length: 7,150mm Loading length: approx. 4,800mm Width: 2,500mm Loading height: approx. 1,400mm Further information - Parabolic suspension - Steel drop sides approx. 900mm, foldable, split in the middle - Loading width approx. 2,300mm - LED reversing lights - SAF axles - 385/65 R22.5 tires

Condition: new, overall weight: 24,000 kg, maximum load weight: 18,900 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 ton Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * LED tail lights * 15-pin power plug * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible Cohx Dnkjpk D Iio Tegt * 8 removable trough stops for lateral centering of the troughs, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum landing ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible * Axles, turntable, towing scissors and air tank painted in a black tone * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available from week 23/2025

Condition: new, overall weight: 8,800 kg, maximum load weight: 6,110 kg, axle configuration: 1 axle, Year of construction: 2024, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf Cjhx Dnkju I Iqxo Tegt

Condition: new, overall weight: 8,800 kg, maximum load weight: 6,110 kg, axle configuration: 1 axle, Year of construction: 2024, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized Cjhx Dsu I Iq Eenk Tegt * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 27,000 kg, maximum load weight: 20,200 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TR 27.0 Plateau: * EBS (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 ton. BPW Eco axles * Air suspension with lifting and lowering system with RTR function * 1st axle can be lifted * Last axle as trailing steering axle with electro-pneumatic steering lock through PIN reverse gear (locking of the trailing axle from the chassis for maneuvering purposes - without installation on the truck side - assigned to PIN 10 in the 15-pin plug connection only for maneuvering purposes, not on public roads * SmartBoard control box as an information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck side * Fixed center drawbar with 50 mm flange drawbar eyelet (loaded 900 mm, mm height adjustment on head plate) * Mechanical support winch at the front, mechanical swivel supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear Cgshx Dor Dpz Asnk Tot * Tool boxes made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm on the right side * 15-pin power plug * LED tail lights * LED rotating beacon (removable) including holder and installation * 2 x LED reversing lights on the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir floor * 400 mm steel bulkhead plugged in * Perforated outer frame bent at approx. 45 degrees with device for mounting 3 tonne drop lashing brackets * 1 x 10 tonne lashing ring in each corner and 2 x 10 tonne and 3 x 6.3 tonne lashing rings on each side * Various holes in the front and end beams for 1.2 tonne lashing option * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable laterally * 4 hydraulic. Control block for possible retrofitting of hydraulic ramp shifting * Chassis, drawbar, bulkhead, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tank, flange drawbar eyelet and support winch at the front painted in a black tone * --Preparation for possible retrofitting of side walls-- * New vehicle with manufacturer's warranty * Errors and prior sale without reservation * Available immediately from Egestorf

Condition: new, overall weight: 18,000 kg, maximum load weight: 14,650 kg, axle configuration: 2 axles, Year of construction: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders Cgohx Dnksl Tqkwe Tet * Disc brakes * Duomatic brake connection * 2 x 10 ton SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Pull scissors 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic tool box on the right side, closed. Plastic fenders * closed side impact protection as advertising space * underrun protection with 2 impact buffers * foldable A-sign at the rear for waste disposal * LED tail lights with protective roof * 2 x 7-pin power plugs * hot-dip galvanized chassis (without air tank, axles, pull scissors, etc.) * roller track length approx. 6,950 mm * roller container is clamped by pneumatic 4-way claw locking * there are 2 plug-in container stops at the front with 2 additional plug-in positions * driving height unloaded approx. 1,165 mm * -- permissible total weight of 20,000 kg technically possible-- * suitable for 5,000 - 7,000 mm container lengths * new vehicle with manufacturer's warranty * errors and prior sale subject to reservation * available immediately from Egestorf

Condition: new, overall weight: 8,800 kg, maximum load weight: 6,110 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring Cgohxju I Iqrs Dnk Tst * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with petrol engine * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg empty weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change * Available week 18/2025 from Egestorf

Condition: new, overall weight: 8,800 kg, maximum load weight: 6,110 kg, axle configuration: 1 axle, Year of construction: 2024, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system Cgshsu I Iqljx Dnk Tjt * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 18,000 kg, maximum load weight: 14,650 kg, axle configuration: 2 axles, Year of construction: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake connection Cgshx Dnksl Tpy Hj Tst * 2 x 10 ton SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Pull scissors 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic tool box on the right side, closed. Plastic fenders * closed side impact protection as advertising space * underrun protection with 2 impact buffers * foldable A-sign at the rear for waste disposal * LED tail lights with protective roof * 2 x 7-pin power plugs * hot-dip galvanized chassis (without air tank, axles, pull scissors, etc.) * roller track length approx. 6,950 mm * roller container is clamped by pneumatic 4-way claw locking * there are 2 plug-in container stops at the front with 2 additional plug-in positions * driving height unloaded approx. 1,165 mm * -- permissible total weight of 20,000 kg technically possible-- * suitable for 5,000 - 7,000 mm container lengths * new vehicle with manufacturer's warranty * errors and prior sale subject to reservation * available immediately from Egestorf

Condition: new, overall weight: 50,000 kg, maximum load weight: 38,900 kg, axle configuration: > 3 axles, Year of construction: 2025, * T5 profile 50.0: * Wabco EBS (electronic braking system) Cjhx Del Tihusnk Togt * RDÜ (tire pressure monitoring) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 to. Gigant axles * last axle with trailing steering (the trailing axle can be locked from the driver's cab for maneuvering purposes without installation on the truck, and additionally using a switch on the trailer) the lock must be switched off before driving on public roads * air suspension, lifting and lowering system with RtR valve * 3rd axle can be lifted (with lifted axle, driving height + 30 mm) * forced unloading and forced lowering of the lift axle for maneuvering purposes (installation on the truck side required) with speed-dependent switching via the EBS electronics * Smartboard as an information tool with pressure sensors to display the total axle load for each axle group * tire pressure monitoring with display option in the truck via EBS signal (without installation on the truck side) * mechanical warning sign package for 3 m total width * 1,500 mm long towing scissors with 50 mm towing eyelet and man. Height adjustment * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm on the left side * Plastic mudguard VA and galvanized sheet steel mudguards HA * Front of the bogie platform with 45° corners and 3 storage compartments with lockable hinged lids (hinged lid opens to the rear) * Shortening of the low-loading platform by 500 mm to 6,280 mm including extended offset by 500 mm to the front * LaSi package: 2 x 6.4 ton lashing eyes at the front in the corners, 2 x 13.4 ton UVV lashing rings on the sides in the corners at the front and rear and 5 x 10 ton lashing rings on the sides. UVV lashing rings (can be swivelled and lowered and can be loaded in all directions), 4 stake pockets on each side with a simultaneous 2 ton lashing option, 1 x 16 ton UVV lashing ring on the rear cross member * Rubber covering on the folding frame, approach slope and on the running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator support shelf * Extendable and foldable extension boom for 3 m total width (plank holder under the chassis on the right side) * Excavator boom support with reinforcement profile from the last axle to the end support approx. L = 2,350 x W = 770 x D = 270 mm, 2 pairs of 6.4 ton UVV lashing rings on the side in the excavator boom support * hydr. Folding ramp with dual-line hydraulics and extendable tip section approx. 4,650 x 720 mm including load holding valves and hydraulic side shift * hydraulic rear support * hydraulic flow divider (with hydraulic pump output in the truck of over 40 ltr./min. up to max. 140 ltr./min.), * Loading height when loaded 890 mm +/- 20 mm due to the air suspension * Loading area above the turntable: 2,600 + 390 x 2,520 mm * Low bed loading area: 6,280 + 500 x 2,520 mm, including 860 mm approach slope * Chassis, bogie, drawbar, widening brackets, loading ramps hot-dip galvanized * Drawbar, axles, hydraulic. Axle supports and air tank painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available immediately from week 25/2025 * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TA-ER 14.4 Plateau: * RDÜ (tire pressure monitoring) * EBS (electronic braking system), * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. Warning sign packages at the front and rear * Drawbar height adjustable by 300 mm with 40 mm flange drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic tool boxes approx. 750 x 350 x 300 mm on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fender * 15-pin power plug Cshx Dnksq Dyvno Togt * LED lighting system 12 / 24 V * 2 additional LED reversing lights. at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 mtr. Cont. external width) and lockable * Locking dimension pushed in according to ISO - DIN 15190 = 2,259 mm. Cont. locks pulled out = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm * Perforated external frame bent at approx. 45 degrees with 2 ton. lashing force every 480 mm, installation of 3 ton. drop lashing brackets every 600 mm possible - 5 x 3 ton. UVV lashing brackets installed on the sides -, 1 x 6.3 ton in the corners at the front and rear. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the back in the end beam) in the front and end beam various holes for 1.2 ton lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 ton / pair) suitable for rubber-tired and tracked vehicles * storage compartment below the loading area in the chassis from the rear * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange drawbar eye painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf on the A7

Condition: new, overall weight: 18,000 kg, maximum load weight: 14,550 kg, axle configuration: 2 axles, Year of construction: 2025, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when the transverse clamping units are opened * 2 x 10 ton BPW wide-track axles * Air suspension (automatic lowering when the brake is uncoupled) * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required - Cehx Dnkjl Tn U Ro Tegt * Pneumatically lowering towing bar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, on the right side * Storage box for cargo net made of galvanized perforated sheet metal, 1,000 x 500 x 500 mm, on the side * Closed plastic fenders, front and rear * Closed side impact protection (RAL 9010 pure white) as Advertising space * Rear underrun protection * Plastic bumper buffers at the rear * Foldable A-sign * Hazardous goods sign with accompanying document pocket and reflective parking warning sign at the rear * 15-pin power connector * LED lighting system with protective roof * 2 LED reversing lights (switched via reverse gear) * Additional front loading with rear track lowering and plug-in stop * Roller recesses in the area of the turntable with mechanical locking Adjustable stop angles (2 positions) on the front left and right of the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp locking system * For the transport of external roller containers according to DIN 30722 Part 1 - DEKRA load securing certificate available * Loaded loading height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tank, axles, turntable, and tension scissors painted in a black tone * --GVW of 20,000 kg technically possible-- * New vehicle without first registration and with manufacturer's warranty * Errors and prior sale subject to change * Available from week 17 of 2025 * Sample images

Condition: new, overall weight: 8,800 kg, maximum load weight: 6,110 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front Cgehx Dnsu I Iqfok Tot * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with petrol engine * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg empty weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change * Available week 18/2025 from Egestorf

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,300 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2024, * ETS-TA-B 11.9: * EBS (electronic braking system) * RDÜ (tire pressure monitoring) * Drum brakes, 2 x 5.5 tonne Gigant axles * Parabolic springs with compensation unit * Drawbar height adjustable by 300 mm * Jost support winch * Mechanical fall supports at the rear * Plastic toolbox at the front right on the bulkhead * Side impact protection * LED lighting * 50 mm softwood floor * 1 x 6.3 tonne lashing ring in the corners in front of the bulkhead and the end support and 2 6.3 tonne UVV lashing rings on the sides embedded in the outer frame Cgshxsl Th Apo Dnk Tst * One-piece mechanical Grating ramps with spring mechanism for one-man operation approx. 2,350 x 870 mm (internal distance 20 mm, ramps cannot be moved) * Front wall, side walls, fender and drawbar hot-dip galvanized * Axles, springs, air tank, support winch at the front painted in a black tone * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire control monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 to. Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board for determining load weight * Warning sign packages at the front and rear * Reflective contour tape on the side and at the rear * Rotating beacon (removable) at the rear * LED light * Straight pull scissors with 50 mm towing eyelet and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed at the front. Plastic individual fenders * Straight steel mudguards at the rear, each with splash guard (spray mist suppression) * Side impact protection * Front of the bogie platform extended by 520 mm with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-strength fine-grain steel * Floor above the bogie platform made of 50 mm and in the low-loading platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood, * 4 stake pockets on each side (but no stakes available) with simultaneous 2 ton lashing option * Lasi package consisting of: 2 lashing eyes 6.4 ton. at the front left and right on the main frame of the bogie platform * 2 pairs of 13.4 ton lashing rings on the outer frame at the front and rear and 4 pairs of 10 ton lashing rings on each side. can be swivelled and lowered * can be loaded in all directions and embedded in the outer frame * 2 pairs of 6.4 ton lashing rings on the side in the excavator boom storage * 8 pairs of galvanised folding booms for 3 m total width (but not in the rear slope) * Widening planks stored in a storage compartment on the left side * Excavator boom storage above the rear axle to the end of the approach slope approx. 2,100 x 740 x 190 mm * mechanical fall supports at the rear * hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm including hydraulic lateral ramp shifting and load holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * rear loading area: approx. 6,780 x 2,520 mm * loading height incl. Approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, folding boom and mechanical support supports hot-dip galvanized * Axles, pull scissors, air tank and slewing ring painted in a black tone * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer's warranty *