Trailer with working platform

MÜLLER-MITTELTAL Tridem, 7mtr., Nachlauf- Lenkachse, Liftbar

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 9-ton BPW Eco axles * 1st axle liftable * Last axle as a trailing steering axle with electropneumatic steering lock via PIN reverse gear (locking of the trailing axle from the tractor for maneuvering purposes - without installation on the truck side - activated on PIN 10 in the 15-pin connector, only for maneuvering purposes, not for use on public roads) ----Suspension: * Air suspension with lifting and lowering system with RTR function ----Electrical System / Lighting: * SmartBoard control box as an information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck side * 15-pin power connector * LED rear lights * LED rotating beacon (removable) incl. bracket and installation * 2 x LED reversing lights on the vehicle rear (switched via reverse gear) * Flashing LED side marker lights ----Drawbar / Flange Coupling: * Fixed center drawbar with 50 mm flange coupling (laden 900 mm, mm height adjustment at the headplate) ----General Components: * Mech. front support winch, mech. pivoting supports at the rear of the chassis * Mech. adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel - black powder coated - approx. 650 x 300 x 600 mm on the right side ----Loading Platform: * Side walls continuous (without center rail) up to the access ramp * Folding rear rails * Steel rear panel inserted in front of the rear rails * 60 mm larch/Douglas fir wood floor * 400 mm steel front panel, plug-in ----Load Securing: * Perforated outer frame approx. 45 degrees angled with device for mounting 3-ton lashing eyes * 1 x 10-ton lashing eye in each corner, as well as additionally 2 x 10-ton and 3 x 6.3-ton lashing eyes on each side * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * Hydr. single-piece access ramp approx. 3,000 x 720 mm, mech. adjustable on the side * 4-way hydr. control block for possible retrofitting of the hydraulic ramp adjustment ----Hydraulics: * Hydr. flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 ltr to 120 ltr/min) ----Painting: * Chassis, drawbar, front panel, mech. rear support struts, access ramps, tailgate hot-dip galvanized * Axles, air tank, flange coupling and front support winch painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved Bsdper Dpz Ajfx Ahksdi ----Delivery time: Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11-ton Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (the steering lock for the trailing axle can be activated from the cab for maneuvering purposes without truck-side installation, as well as additionally by a switch on the trailer); the lock must be deactivated before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent activation via EBS electronics ----Suspension: * Air suspension with lifting and lowering system, equipped with RtR valve Bsdpjl Tihujfx Ahkodi ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye, manual height adjustment ----Electrical / Lighting: * Smartboard info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Fittings: * Mechanical warning sign package for 3 m overall width * Toolbox, galvanized steel, approx. 650 x 300 x 600 mm, mounted left side * Front plastic fenders and galvanized steel rear mudguards ----Low-loader Area: * Front of turntable platform with 45° corners and 3 storage compartments with lockable flaps (flap opens to rear) * Shortened low-bed platform by 500 mm to 6,280 mm including extended stepped drop by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and platform running surface * Bamboo wood insert between longitudinal members in front of excavator stick rest ----Load Securing (Load Securing Package): * 2 x 6.4 t lashing rings at the front corners * On each side, front and rear corners, 2 x 13.4 t UVV-compliant lashing rings * 5 x 10 t UVV-compliant lashing rings per side (pivotable, retractable, loadable in all directions) * 4 side stake pockets per side with 2 t lashing capability * 1 x 16 t UVV lashing ring on rear crossmember ----Widening: * Extendable and foldable outriggers for up to 3 m overall width (plank holders under chassis on right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforced profile from last axle to rear crossmember, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and adjustable ramp tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulic System: * Hydraulic flow divider (for hydraulic pump flow on truck from over 40 l/min up to 140 l/min max.) ----Loading Height: * Loaded: 890 mm +/- 20 mm by air suspension ----Loading Platform Dimensions: * Platform above fifth wheel: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on ramp ----Paintwork: * Chassis, turntable, drawbar, widening consoles, drive-on ramps – hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately *