Used Müller-Mitteltal Ra Trailers for sale (241)

Condition: used, maximum load weight: 8,100 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 2,900 kg Payload: 8,100 kg Overall length: 8,100 mm Loading length: 6,000 mm Width: total width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Side wall height: 400 mm - Wooden floor - Spring ramps L: 2,700 mm W: 600 mm Gksdpfxsxtfkfo Aaxsd - Height-adjustable drawbar - Tyres 235/75 R17.5

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2025, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with balancing unit * Drawbar adjustable in height by approx. 300 mm * BPW support winch * Mechanical drop-down supports at the rear * Plastic toolbox on the front right of the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * In the corners in front of the bulkhead and the rear cross member, 1 x 6.3 t lashing point each; laterally, 2 x 6.3 t UVV-compliant lashing rings each set into the outer frame Godpfx Aaowyhzvjxekd * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,350 x 870 mm (20 mm spacing between, ramps non-slidable) * Front wall, side walls, mudguards and drawbar hot-dip galvanized * Axles, springs, air tank, and front support winch painted black * New vehicle with full manufacturer's warranty * Errors and interim sale reserved * Immediately available from Egestorf

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2012, loading space length: 6,770 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, container lock, twin tires, storage box Body: 2-axle turntable flatbed trailer with stanchions and TwistLock locks, TwistLock can be extended to 3m. 20t, drum brake, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Access ramp for 1.000,- EUR extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gsdpst Uq D Tsfx Aaxekd - .

Condition: used, maximum load weight: 13,720 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2005, next inspection (TÜV): 04/2026, loading space length: 5,200 mm, loading space width: 2,427 mm, loading space height: 970 mm, total width: 2,550 mm, total height: 2,580 mm, Equipment: ABS, Steel rims, air brakes, drum brakes, BPW axles, metal floor, used vehicle Gkjdpexrxqvjfx Aaxod Vehicle no. 3234, ABS, EBS, BPW Eco-Plus axles with drum brakes, air suspension, tyres: 385/65 R 22.5, storage box, support leg, 50mm towing eye, aluminium side panels, metal loading floor, tipper internal dimensions LxWxH: 5,200 x 2,427 x 970 mm, unladen weight: 4,280 kg, permitted weight: 18,000 kg, first owner, errors and prior sale excepted.

Condition: used, empty load weight: 4,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2008, loading space length: 5,000 mm, loading space width: 2,410 mm, loading space height: 950 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake EBS Gkodporz Rtmsfx Aaxed Payload 13,580 kg Swinging and folding aluminum side drop sides with lifting springs Rear steel dropside BPW axles Errors excepted

Condition: new, maximum load weight: 14,300 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, Müller ? Mitteltal KA-TA-R 19 Tandem Tipper Trailer with Bordmatik (Hydraulic Drop Side) on the Left Inquiry Number: 11573 * BRAND NEW VEHICLE now finally available for immediate delivery!!! * Delivery free to your site available upon request. * Financing available through our partners FM LeasingPartner or MMV Leasing for terms of 24-72 months, with or without down payment, with or without final residual value. Godpfxswq Uihs Aaxskd * For example: 60 months, no down payment, no residual value, 769€/month * Request your individual offer from us! We are an official MüllerMitteltal dealer. ---- * Gross weight: 19t, Payload: 14.30t, RAL 9016 traffic white or other paint upon request * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * Body dimensions – steel: 4,995mm x 2,380mm x 900mm * Right side with spring-assisted dropside (2 steel springs), rear wall steel * Left side with Müller hydraulic Bordmatic system * Tipper roll-over tarpaulin, removable * 4 pairs of lashing rings, recessed and foldable in 5mm thick steel floor, LC 3000 daN * LED lighting system 12+24 Volt instead of standard * 2 LED reversing lights * Side marker lights with indicator control * BPW Eco axles, air suspension, drum brakes * 385/65R 22.5, with TPMS, EBS 2S/2M * 4 half-round mudguards * Chassis, drawbar and foldable rear underrun protection hot-dip galvanized * Front wall platform with galvanized ascent step * Adjustable drawbar with 50mm eye, +77mm/+33mm offset * Front support leg with hand winch * Foldable underrun protection for paver feeding * Removable protective grilles for tail lights ---- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Fridays: 08:00 – 15:00 * Outside these hours, appointments are available by arrangement * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle français * Leasing, financing, trade-in possible

Condition: used, maximum load weight: 13,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 18,000 kg Unladen weight: 4,250 kg Payload: 13,750 kg Overall length: 8,800 mm Loading length: 6,600 mm Gksdpfxoxnvkfo Aaxjd Width: overall width 2,550 mm / platform width 2,470 mm Loading height: approx. 1,000 mm Additional information - 800 mm side panels + fold-down tailgate - Front wall 1,200 mm - Underrun protection - Gigant axles - Twin tyres 235/75R17.5 - Air suspension - Rear ramp storage compartment - Quick lowering valve - Rail for ramps - 4 heavy-duty lashing points - 6 pairs of lashing rings

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2024, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf Gsdewyhzpepfx Aaxskd

Condition: used, empty load weight: 2,380 kg, maximum load weight: 8,320 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 04/2016, next inspection (TÜV): 06/2026, loading space length: 5,030 mm, loading space width: 2,010 mm, loading space height: 325 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminium underrun protection, tool box, height-adjustable drawbar. Body: tandem low-bed trailer with mechanical loading ramps, galvanized access ramps, 2x BPW axle, drum brakes! Gkodpfx Aaoxqhltoxjd Loading height approx. 700 mm! Ramp length approx. 2200 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, empty load weight: 5,600 kg, maximum load weight: 12,400 kg, first registration: 02/2012, next inspection (TÜV): 01/2025, total width: 25,500 mm, suspension: air, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 18,000 kg,

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS (Electronic Braking System) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Adjustable drawbar, galvanized, with 300 mm height adjustment and 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical galvanized folding rear supports * 15-pin electrical connector * LED tail lights * Galvanized, bolted underrun protection * Galvanized steel toolbox, mounted on the right side * Plastic quarter mudguards * Galvanized chassis * Steel platform body - 3-way tipper * Continuous drop sides with upper internal tubular reinforcement, no center posts, foldable with side wall spring lifter * Rear flap foldable and swinging, with manual central locking * Galvanized, bolted rear stanchions * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing rings each side, integrated into the outer frame * 4 mm fine-grained steel floor plate * Net hooks and rear ramp mounting rail * Prepared for later installation of side wall extensions * Body reinforced and certified for cargo securing according to EN 12642 XL * Two-step access on the left side Gedpfxel Th A Es Aaxskd * 1 pair of aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed under the loading area in the chassis * Axles, springs, air tank, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle, unregistered, with manufacturer's warranty * Tire size: 385/55 R 22.5 * Side wall paintwork in RAL 9010 pure white * Optional side panel paintwork available in any RAL color for a surcharge * Errors and prior sale excepted * Available from calendar week ...

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer assembly Gkedpov Dz N Nefx Aaxsd * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Side-mounted toolbox made of galvanized steel sheet, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls at the top with internal tube reinforcement, without central posts, foldable with drop-side spring assist * Rear gate foldable as well as swinging, with manual central locking * Hot-dip galvanized, bolted rear stakes * Each corner with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed in the outer frame on each side * 4 mm sheet floor made of fine-grained steel * Net hooks, rear ramp mounting rail * Prepared for optional retrofit of side wall extensions * Body reinforced with load securing certificate according to EN 12642 XL * 2-step access on the left side as climbing aid * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading area in the chassis * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without prior registration, covered by manufacturer’s warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 pure white * Other side wall colors in RAL available at extra cost * Subject to errors and prior sale * Available from KW (calendar week)

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS (Electronic Braking System) * RDÜ Tire Pressure Monitoring System * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7-ton Gigant Axles * Parabolic Springs with Tandem Equalizer Unit * Approx. 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front Gksdpev El Tusfx Aaxsd * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted on the right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous sidewalls with top internal tube reinforcement—without center stanchions—foldable with drop-side spring assist * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized, bolted tailgate stanchions * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings recessed in the outer frame on each side * 4 mm sheet steel floor made of fine-grain steel * Net hooks, mounting rail at the rear for loading ramps * Preparation for subsequent installation of side board extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as climbing aid * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber and tracked vehicles * Lockable storage compartment integrated below the loading area at the rear of the chassis * Axles, springs, air tanks and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without prior registration with manufacturer’s warranty * Tires: 385/55 R 22.5 * Sideboard paint finish in RAL 9010 pure white * Sidewall paint finish available in any RAL color at extra cost * Subject to errors and prior sale * Available from calendar week…

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front Gkjdpexptn Defx Aaxed * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear Gsdpjpk D Iisfx Aaxjkd * Center axle liftable * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye & height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Contour marking tape, reflective on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with roll container recesses in turntable area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the guide rails * Load securing certificate according to DIN 30722-1 * Transport possible for up to 2 skip containers up to max. 10 m³ volume * Including 8 repositionable skip stoppers for lateral centering; front 4 skip stoppers plug-in with oscillating stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * Four cloverleaf-style lashing bars (side) and one pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the rolling path area of the approach ramp * Mechanical drop supports at the rear * 1 pair of aluminum drive-on ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Tires 235/75 R17.5 * Loaded height approx. 1,003 mm * Payload 18,900 kg * Technically permissible gross vehicle weight 27,000 kg * Axles, turntable, drawbar and air tanks painted in black * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Lifting center axle * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device * Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumpers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller depressions in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks * Load certificate according to DIN 30722-1 Gkodepk D Awjpfx Aaxed * Transport of up to 2 skip containers with max. 10 m³ volume each possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking * 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical rear support legs * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires: 235/75 R17.5 * Laden ride height: approx. 1003 mm * Payload: 18,900 kg * Technical gross vehicle weight: up to 27,000 kg * Axles, turntable, drawbar, and air tank painted black * New vehicle without initial registration, covered by manufacturer's warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty Gjdpfx Asl Tihujaxekd * Errors and prior sale excepted * Available from week 14/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Drawbar adjustable in height by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall * Main frame made of high-tensile steel * Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking * Rear stanchions bolted * Steel rear wall slid in front of the ramps * At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side Gkjdpfjtr Sucox Aaxsd * 4 mm floor made of high-tensile steel * Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and landing gear painted black * Side panels and platform in RAL 9010 pure white * Painting of the side panels and tipping body in a RAL color of choice available at extra cost * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 07/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders Gjdpetr St Ujfx Aaxskd * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical fold-down supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin power connector * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Lashing hooks on the sides and rear in the central locking mounts, plus 2 pieces on the front wall * Main frame made of fine-grained steel * Steel pallet two-way tipper body: front wall fixed, made of smooth sheet; continuous side walls, foldable without center stakes with drop side spring assist and oscillating via manual central locking * Rear stakes bolted * Steel rear wall inserted in front of the ramps * Each corner fitted with one 5 t lashing ring and four 3 t lashing eyes recessed in the outer frame on each side * 4 mm floor made of fine-grained steel * Two-piece mechanical grid ramps with aluminum pointed section 2,150 + 1,300 mm x 600 mm (manually retractable down to 80 mm) * Chassis, drawbar, rear stakes, underride guard, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in black * Side boards and platform in RAL 9010 pure white * Side walls and tipping platform can be painted in a different RAL color for an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: * RDÜ (Tire Pressure Monitoring) * EBS (Electronic Braking System) * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 t BPW Axles * Air Suspension with Lift and Lowering Facility * Mechanically Adjustable 3 m Warning Sign Packages Front and Rear * Drawbar Adjustable in Height by 300 mm with 40 mm Flange Tow Eye * Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (therefore B-measure of approx. 8,080 mm) * Support Winch at Front * External Folding Supports at Rear * Plastic Toolboxes approx. 750 x 350 x 300 mm each on left & right side * Side Impact Protection * Underrun Protection Godov D Tbdjpfx Aaxokd * Plastic Quarter Mudguards * 15-pin Power Connector * LED Lighting System 12 / 24 V * 2 Additional LED Reversing Lights at Rear (activated via reverse gear) * 1 Removable LED Beacon incl. Bracket at Rear * 400 mm High Bolted Front Wall * 50 mm Softwood Floor * 2 Pairs of Container Locks (extendable to 3 m container external width and lockable, lock dimension retracted as per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm - this dimension is not to DIN - for an absolute outside width of 3,000 mm) * Perforated Outer Frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; each side fitted with 5 x 3 t UVV-compliant lashing rings; at each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the softwood floor, rear in the end cross member); various holes in front and rear cross members for 1.2 t lashing options * 1 Pair Aluminum Slide-in Ramps approx. 3,570 x 410 mm (10 t capacity / pair) suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated into chassis below the loading area * --- Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized --- * Axles, air tank, front winch and flange tow eye painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 09/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal without in-truck installation required * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange towing eye * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin power connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks located laterally and rear in the central locking mounts, plus 2 on the front wall * Main frame made from fine-grain steel * Steel pallet/2-way tipper body with fixed smooth sheet steel front panel, continuous side panels—foldable without central stakes, equipped with drop-side spring lifters and capable of pendulum function via manual central locking * Rear posts bolted * Steel rear wall slid in front of ramps * Lashing points: 1 x 5 t in each corner, plus 4 x 3 t lashing rings recessed laterally in the outer frame * 4 mm floor made of fine-grain steel * Two-piece mechanical grating ramps with aluminum end piece, 2,150 + 1,300 mm x 600 mm (can be manually reduced to 80 mm width) * Chassis, drawbar, rear posts, underrun protection, mechanical drop supports, and loading ramps are hot-dip galvanized Gsdetr St Hspfx Aaxekd * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Drop sides and body in RAL 9010 pure white * Side walls and tipper body can be painted in any RAL color for an additional charge * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: * RDÜ (Tire Pressure Monitoring System) * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t BPW axles * Air suspension with lift and lower function * Mechanically adjustable 3-meter warning sign boards at front and rear * Drawbar height adjustable by 300 mm with 40 mm flange towing eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * Support windlass at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED beacon (removable incl. mount) at the rear * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with a total outer width of 3,000 mm Gsdsv D Tbkspfx Aaxjkd * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm, possible installation of 3 t folding lashing brackets every 600 mm; 5 x 3 t UVV-compliant lashing brackets mounted per side; at each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the rear cross member), various holes for 1.2 t lashing options in the front and rear cross members * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear integrated storage compartment below the loading area inside the chassis * ---Chassis, drawbar, front wall, underrun protection, and rear stabilizers hot-dip galvanized--- * Axles, air tanks, front windlass, and flange towing eye painted in a shade of black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 09/2026

Condition: new, maximum load weight: 13,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck display via EBS signal (no installation on the truck necessary) * 2 x 9-ton Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost support winch at the front * Foldable, galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform on the front wall * Manual roll-over tarp * 15-pin electrical connector * LED tail lights with galvanized protective cover * Chassis made of high-tensile fine-grained steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – swinging via manual central locking and foldable with drop side spring assist) * Roll-over tarp in RAL 7038 agate grey with tensioning by ratchet straps at the sides and tensioning rubbers front and rear Gkodpfx Ajxl Nkgeaxed * Front wall platform made of grating with access step at the drawbar and a grab handle on the front wall * Rear wall made of HBW 400 steel, swinging with automatic two-claw locking * 5 mm steel floor made of HBW 450 steel * Four 3-ton recessed and foldable lashing rings per side – embedded in the steel floor * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons * Tipper body and side walls painted in RAL 9010 pure white * Drop sides painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 11/2026 * Sample images

Condition: new, maximum load weight: 20,200 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with raise/lower system and RTR function * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear (lock for trailing axle from the tractor unit for maneuvering purposes - without truck-side installation - assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation Gkodpfxer Dpz Aj Aaxjd * Fixed central drawbar with 50 mm flanged towing eye (loaded 900 mm, mm height adjustment on head plate) * Mechanical landing gear at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm mounted laterally on the right * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the approach slope * Folding rear stakes * Steel rear wall inserted in front of the rear stakes * 15-pin power connector * LED tail lights * LED beacon (removable) incl. bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir timber flooring * 400 mm steel front wall, plug-in * Perforated outer frame approx. 45° angled with fittings for mounting 3 t drop-down lashing brackets * 1 x 10 t lashing ring in each corner plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various bore holes in the front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for possible retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump flow rate in truck from over 40 l to 120 l/min) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 13/2026 * Sample images

Condition: new, maximum load weight: 20,200 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system, including RTR function * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear (steering lock of the trailing axle from the tractor for maneuvering purposes - no truck-side installation required - assigned to PIN 10 in the 15-pin connector, for shunting only, not for use in public road transport) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, height adjustment at head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side panels (without central stanchion) up to the drive-on slope Gedpfx Aasr Dpzxoxekd * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at the front and rear * Tool box made from galvanized steel sheet – black powder-coated – approx. 650 x 300 x 600 mm, mounted on the right side * 15-pin power connector * LED tail lights * Removable LED beacon incl. bracket and installation * 2 x LED reversing lights at the rear of the vehicle (controlled via reverse gear) * Flashing LED side marker lights * 60 mm larch / Douglas fir wood floor * 400 mm plug-in steel headboard * Perforated outer frame approx. 45° bent with device for mounting of 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus two 10 t and three 6.3 t lashing rings per side * Various 1.2 t lashing options in the front and rear cross members * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-section hydraulic control block for potential retrofit of hydraulic ramp offset * Chassis, drawbar, headboard, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front landing gear painted in black * Hydraulic flow divider inside the trailer (for hydraulic pump flow in the truck of over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 13/2026 * Sample images