Used Faymonville Stz Semitrailers for sale (218)

Condition: used, maximum load weight: 38,300 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Full equipment details available on request. * Extendable cargo bed * JOST mechanical landing gears with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) * BPW axles and suspension, 2 fixed axles, 1 steering trailing axle * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF tyres * Brake system compliant with EU regulations featuring EBS-E (2S2M) * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Galvanized, extendable width extensions, approx. 230 mm per side * Removable aluminum side boards on the gooseneck * 1 galvanized toolbox integrated into the tapered gooseneck * 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container * 6 pairs of stake pockets on the outer frame of the loading bed * Lift axle on the front axle with TEBS E control * One pair of one-piece aluminum ramps, approx. 2,500 x 600 mm, ramps equipped with spring lift assist, manually adjustable, max load capacity per pair: 24,000 kg (+360 kg) Gbsdpfx Aaevl N Rdoxow * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Load gauge for determining axle loads, including load chart * HRM metallization (High Resistance Metallisation) * Single-color paint finish in RAL 3002 carmine red

Condition: used, empty load weight: 11,800 kg, maximum load weight: 36,200 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2022, total length: 2,550 mm, suspension: air, tire size: 245/70 R17,5, Equipment: ABS, | Faymonville Telemax F-S43 low loader | 3 axles steered by remote control | Heavy duty lashing points | SAF axles | extendable | Stake pockets | Tires: 245/70 R17.5 | Total weight: 48,000 kg, payload: 36,200 kg | 13,500mm+7,900mm+8,100mm | Subject to error, input mistake and prior sale. Gbedpfx Aaowm I Ipjxew

Condition: used, empty load weight: 14,995 kg, maximum load weight: 50,805 kg, overall weight: 65,800 kg, axle configuration: > 3 axles, first registration: 10/2023, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 900 mm, suspension: air, tire size: 235/75 R17.5, color: grey, Year of construction: 2023, operation weight: 14,995 kg, Equipment: ABS, You will receive a current and complete inspection and functional report for every used trailer. Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood covering 30 mm thick Loading area: -Loading area in extendable version with rear bevel of approx. 500 mm x 8° -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -4 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) -1 intermediate table 250 mm -Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) -Hardwood covering approx. 48 mm thick, checkered sheet covering above the axles Axles and Tires: -BPW axles with hydro-mechanical forced steering -Technical axle load: 12,000 kg -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R17.5 Braking system: Gbjdpfx Aaev Hr Axexew -Braking system in accordance with EU regulations with EBS-E (4S3M) Accessories included: -2" kingpins -A galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 brake shoes with holder on the bulkhead -A spare wheel with holder in front of the bulkhead -Electro-hydraulic unit -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Mounting in the rear area of the gooseneck for aluminum docking ramps -Galvanized extensions, extendable by approx. 230 mm on each side -European reflector signs (red-yellow) on the rear of the trailer -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel, left and right, a bracket for the warning signs including a socket -Galvanized folding supports under the slope of the loading area -A bracket for a rotating beacon at the rear of the trailer -Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump -A mud flap at the rear of the trailer -Manual and description -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for a 20ft, 2x 20ft, 40ft or a 45ft container -8 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Movable mounting rails for aluminum ramps at the rear of the vehicle -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status -Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A holder for a rotating beacon on the warning signs -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as a lane control -A painted layer of sand on the checker plates, above the kingpin and the loading area as a slip protection device -Speed sticker 80 km/h at the rear -Load pressure gauge for determining the axle loads including load diagram

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2016, Equipment: ABS, Visit our website, where you can find our complete vehicle stock with many more photos and information in several languages. SEL 7432 (10.2026/04.2026) Faymonville Telemax Telescopic / 13,650mm - 21,550mm German registration First registration: 01.2016 Gross vehicle weight (kg): 48,000 Permitted total weight (kg): 42,000 Unladen weight (kg): 9,500 VIN: YAFSR3000G0018145 Technical inspection: 02.2025 / Safety inspection: 08.2025 Gbsdpfjv Dp H Ajx Aaxew TIRES AND AXLES: Tires: 235/75 R 17.5 Axle configuration: 3 axles 3rd axle self-steering Air suspension Drum brakes BODY: Platform extension (mm): 7,900 OTHER SPECIFICATIONS: Lashing rings Stake pocket rails Telescopic VEHICLE DOCUMENTS: Registration certificate part I Registration certificate part II Additional documents are available on request for an extra charge. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC d. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot assume responsibility for any errors or omissions. We ask our customers to consult the available photos. The specified dimensions are approximate. Our vehicles are sold in their current condition, as they are. We invite customers to visit our company to inspect the condition of the vehicle in person. We also offer the option of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. Should the customer require new batteries, we are available to provide information regarding prices.

Condition: used, maximum load weight: 53,680 kg, overall weight: 69,800 kg, axle configuration: > 3 axles, first registration: 08/2016, Internal vehicle number: VTC20031 German vehicle Available immediately at our yard in Kaufungen - Kassel For more information, contact Luis Lucena 1st axle is steered and liftable 3rd and 4th axles with forced steering Extendable by 2,900 mm Length: 12,600 - 15,500 mm Hydraulically extendable width: 2,540 - 3,200 mm Wheel recesses Unladen weight: 16,120 kg Max. permissible weight: 65,000 kg (57,000 kg in Germany) Financing example: * Internal no.: VTC * Purchase price: €64,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,016.49 * Final residual value: €12,980.00 Gbedpew Nug Aofx Aaxjw If you are interested in this offer or would like it adjusted to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing directly with us possible. GOLEC Commercial Vehicles GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty Gedpfx Aov Rvgcjaxjbw * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Gbjdpfxexf Sile Aaxow Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, axle configuration: > 3 axles, first registration: 09/2025, loading space length: 8,900 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2025, = Additional Options and Accessories = - Fork sleeves Godpfx Aaoxfbcbjxobw = Notes = NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and sliding ramps, loading platform 890 cm with rear incline, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle assembly with drawbar approx. 1,750 mm and 50 mm towing eye, coupling height 830–1,010 mm loaded, wide load signs, beacon, 6 pairs of sockets for stakes (approx. 100 x 50 mm), tyres 245/70-R17.5. = Further Information = Axle configuration Tyre size: 245/70-R17.5 Axle make: BPW DRUM Brakes: drum brakes Suspension: air suspension Front axle 1: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Front axle 2: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 1: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 2: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Dimensions Dimensions (L x W x H): 1,094 x 254 x 375 cm Weights Unladen weight: 8,464 kg Payload: 34,336 kg Gross vehicle weight: 42,800 kg Functionality Body make: MAXTRAILER MAX600-S-4-8.90-U Deck height: 90 cm Condition Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, empty load weight: 9,600 kg, maximum load weight: 53,400 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,540 mm, loading space height: 1,340 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Equipment: ABS, Loading area: -Loading area with approx. 30 mm thick hardwood floor -10 pairs of lashing rings can be folded outwards Seat posts: -JOST seat posts with 2-speed gearbox for 24 t lifting load Axles and tires: -BPW axles, techn. 10,000 kg, first axle rigid, all other axles hydro-mechanically forced steered, mounted on turntable -Air-sprung with lifting and lowering valve -axle tool -385/65 R22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC -S690QL/S700MC Electrical system: -Electrical system in accordance with EU regulations, 24 volt lighting -ASPÖCK UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: -First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in a single color in nova grey -Rear part metallized and painted in RAL 9010 Accessories included: -Loading area with approx. 30 mm thick hardwood floor Gbsdperq Dlfofx Aaxsw -2" kingpin -One galvanized steel end wall approx. 1,200 mm high EN12642-XL -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the front wall -Storage for 1,000 mm stanchions in the rear central support -On the gooseneck and on the rear panel on the left and right, one bracket each for the warning signs including socket -Reverse steering can be operated from the front and rear via cable remote control using pushbuttons, with tracking control of the axles -Electric hydraulic unit -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -12 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -European reflector plates at the rear of the trailer -One bracket for a rotating beacon at the rear of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -TPMS tire pressure monitoring system: -For correct display, the motor vehicle must be able to transmit and display this data -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control -5 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Speed stickers 80 km/h at the rear and on both sides -Adjustable access ladder mounted on the left and right in the direction of travel -2 reversing lights mounted on the rear panel -Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, axle configuration: > 3 axles, color: green, Year of construction: 2013, Empty weight: 25.200 kg Gedpfxswhl Sbs Aaxebw Carrying capacity: 60.300 kg GVW: 85.500 kg Tyre size on axle 1: 285/70 R19.5

Condition: used, axle configuration: > 3 axles, first registration: 03/2016, loading space length: 8,600 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 205/65R17.5, color: black, Year of construction: 2016, 2 x friction-steered / trailing steered axles. SAF axles with drum brakes. Loading platform: 860 + 430 cm extendable. Loading height: 90 cm. Hydraulic ramps, operated via 24V system. = Further information = Axle configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Gbsdpfxjxdiimo Aaxow Rear axle 1: Twin-mounted wheels; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 2: Twin-mounted wheels; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 3: Twin-mounted wheels; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Front axle: Twin-mounted wheels; Tyre tread left inside: 30%; Tyre tread left outside: 30%; Tyre tread right inside: 30%; Tyre tread right outside: 30% Weights Unladen weight: 14,680 kg Payload: 33,320 kg Gross Vehicle Weight (GVW): 48,000 kg Identification Type number: MULTIMAX - EXTENDABLE / HYDR RAM = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We make every effort to provide correct information, however, no rights can be derived from the listed texts.

Condition: used, maximum load weight: 42,700 kg, overall weight: 58,600 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, Vehicle identification number: YAFTL313000014137 First registered: July 18, 2013 DE HU due Gedortlxhepfx Aaxjbw Own weight: 15,900 kg Total length: 16,700 mm Gooseneck 3,700 mm Steering radius of kingpin to the rear approx. 2,700 mm Kingpin standard 3.5 inches - fifth wheel height: 1,320 - 1,350 mm Low bed length: 8,500 mm - Loading height: approx. 500 mm TELESCOPIC by 4,250 mm Chassis frame: 4,500 mm - Loading height: approx. 900 mm Suspension travel (with air suspension) approx.: -80/+160 mm Excavator trough - Dipper stick trough Hydraulic support feet Fifth wheel load technically up to 25,000 kg Axle loads 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with RADIO + cable remote control Tires: 235/75 R 17.5

Condition: used, maximum load weight: 37,575 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, More vehicles available at Extract from the equipment. Complete equipment details on request. Gooseneck: Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform: * Telescopic loading platform with rear bevel approx. 1,000 mm x 8° * Between 1st and 2nd axle, one pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 4 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs on the external frame for attaching tension straps (LC 2,000 daN) * Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t / piece Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 Gjdpexfx R Aefx Aaxsbw Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: * HRM metallization (High Resistance Metallisation), complete steel construction blast-cleaned to SA2.5-SA3. Afterwards hot finished with ZINACOR 850 (Zinc 85% - Alu 15%) * High-quality 2-component (2K) single-color top coat in RAL 3002 carmine red Accessories included: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Galvanized extensions, extendable by approx. 230 mm per side * Galvanized folding supports under the rear bevel of the loading platform * A bracket for a beacon at the rear of the trailer * Plug-in aluminium side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H), the rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * 1 galvanized toolbox, integrated into the beveled gooseneck * Hardwood bumper on the gooseneck rear wall to the loading platform * 3 pairs of WADER container pockets in the loading platform for one 20' (30') or one 40' container * 5 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm on the external frame of the loading platform * Hardwood extension planks, maximum permissible load on an area of approx. 200 x 200 mm up to approx. 3.5 t * One galvanized holder for the extension planks, left and right under the loading platform * Sanded paint layer as anti-slip on the chequer plates, over the kingpin and the loading platform * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light * Load pressure gauge for axle load determination including load chart * 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * Storage for max. 7 pairs of plug-in stanchions, approx. 100 x 50 mm, on the front wall * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, incl. approx. 48 mm thick hardwood covering, incl. electro-hydraulic unit. Ramp with hydraulically folding/unfolding ramp sections. Hydraulic lifting gear and hydraulic lateral movement, maximum load

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2015, Equipment: ABS, GERMAN Visit our website, where you will find our complete vehicle stock with many more photos and information in several languages. SEL 7491 Faymonville F-S43-1BGA Telescopic / Steering Axle German registration First registration: 27.05.2015 Techn. total gross weight (kg): 48,000 Permitted total weight (kg): 42,000 Empty weight (kg): 9,500 VIN: YAFSR300XF0016868 TIRES AND AXLES: Tires: 235/75 R 17.5 Axle configuration: 3 axles SAF 3rd axle is self-steering Air suspension Drum brakes OTHER SPECIFICATIONS: Telescopic VEHICLE DOCUMENTS: Registration Title M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Gedpfewknudox Aaxjbw Although every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. We ask our customers to consult the available photos. The listed dimensions are approximate values. Our vehicles are sold as-is, in the condition they are in. We invite customers to visit our company to inspect the vehicle’s condition personally. We also offer the opportunity for a test drive. It is important to note that the batteries supplied with the vehicle are the ones currently installed. If the customer wants new batteries, we are available for price information.

Condition: used, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 10/2024, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Year of construction: 2024, operation weight: 10,350 kg, Equipment: ABS, You will receive a current and complete inspection and functional report for every used trailer. Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood flooring 30 mm thick Loading area: -Telescopic loading area with rear bevel approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm Gedpfx Aevu T Ursaxebw -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the bevel and in the loading area protruding to accommodate the excavator bucket handle approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front of the loading area (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) -Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) One-piece aluminum ramps: -One pair of one-piece aluminum ramps approx. 2,500 x 600 mm -Ramp with spring lifting mechanism and manually movable -Maximum load per pair: 24,000 kg Axles and Tires: -BPW axles and suspension, 2 axles rigid, 1 axle with self-steering -Technical axle load: 12,000 kg -Electromagnetic reversing lock can be activated via reverse gear and manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpins -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Holder in the rear area of the gooseneck for aluminum docking ramps -Galvanized extensions, extendable by approx. 230 mm per side -Galvanized folding supports under the bevel of the Loading area -A bracket for a rotating beacon at the rear of the trailer -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container -3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area -A removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the bevel of the loading area -On the checker plates on the gooseneck and on the loading area, a painted sand layer as anti-slip protection -Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-fini

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, suspension: other, tire size: 285/70R19.5, color: black, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - Centralized lubrication system = Notes = Faymonville Jeep Dolly D3 Year: 10-2006 1 x lift axle 1 x friction-steered axle / trailing steering axle Air suspension Maximum technical weight: 56,000 kg Faymonville STBZ-5VA Year: 10-2006 Pendulum axles Removable gooseneck Movable deck Extendable bed: 400 cm Loading bed: 650 + 400 cm 50,000 kg gooseneck load Maximum technical weight: 119,680 kg = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: twin tires; left inner tire tread: 15%; left outer: 60%; right inner: 60%; right outer: 60%; Suspension: air suspension Front axle 2: twin tires; left inner tire tread: 30%; left outer: 30%; right inner: 40%; right outer: 60%; Suspension: air suspension Front axle 3: twin tires; steered; left inner tire tread: 30%; left outer: 70%; right inner: 60%; right outer: 70%; Suspension: air suspension Rear axle 1: twin tires; steered; left inner tire tread: 30%; left outer: 60%; right inner: 40%; right outer: 70%; Suspension: hydraulic suspension Rear axle 2: twin tires; steered; left inner tire tread: 50%; left outer: 50%; right inner: 30%; right outer: 75%; Suspension: hydraulic suspension Rear axle 3: twin tires; steered; left inner tire tread: 60%; left outer: 60%; right inner: 60%; right outer: 60%; Suspension: hydraulic suspension Rear axle 4: twin tires; steered; left inner tire tread: 60%; left outer: 60%; right inner: 40%; right outer: 50%; Suspension: hydraulic suspension Rear axle 5: twin tires; steered; left inner tire tread: 70%; left outer: 70%; right inner: 20%; right outer: 70%; Suspension: hydraulic suspension Dimensions Width: 285 cm Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Gbedpoxbng Eefx Aaxjw Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET EXPORT PRICES. (Joris Versteijnen NL-DE-GB | Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information but cannot derive any rights from the published texts.

Condition: used, maximum load weight: 42,700 kg, overall weight: 58,600 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, Vehicle identification number: YAFTL313000014136 First registered: July 18, 2013 DE HU due Own weight: 15,900 kg Total length: 16,700 mm Gooseneck 3,700 mm Steering radius of kingpin to the rear approx. 2,700 mm Gsdpfxsr Dplms Aaxebw Kingpin standard 3.5 inches - fifth wheel height: 1,320 - 1,350 mm Low bed length: 8,500 mm - Loading height: approx. 500 mm TELESCOPIC by 4,250 mm Chassis frame: 4,500 mm - Loading height: approx. 900 mm Suspension travel (with air suspension) approx.: -80/+160 mm Excavator trough - Dipper stick trough Hydraulic support feet Fifth wheel load technically up to 25,000 kg Axle loads 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with RADIO + cable remote control Tires: 235/75 R 17.5

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin Gedpfx Aev Etx Eeaxobw * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 45,900 kg, overall weight: 58,600 kg, axle configuration: 3 axles, first registration: 06/2013, Equipment: ABS, Vehicle identification number: YAFTL313000014129 First registered: 05.06.2013 DE HU due Own weight: 12,700 kg Gbodpfop Spkgsx Aaxew Total length: 17,000 mm Gooseneck 3,700 mm King pin standard 3.5 inch - fifth wheel height: 1,320 - 1,350 mm Low bed length: 8,500 mm - Loading height: approx. 450 mm (ground clearance approx. 150 mm) Chassis frame: 4,300 mm - Loading height: approx. 900 mm Suspension - air suspension - approx. -80 / + 160 mm Excavator trough - bucket handle trough Rack pockets including stanchions Fifth wheel load technically up to 25,000 kg Axle loads 3 x 11,200 kg SAF axles with drum brakes 3 x hydraulically forced-steered axles with cable remote control Tires: 235/75 R 17.5

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid Godjxc Axrepfx Aaxobw * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: Gjdpoxbmplsfx Aaxebw * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our entire stock of vehicles, including those available immediately and at short notice, on our website. Extract from the specifications. Full equipment list available upon request. Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractors: 6 x 4 or 8 x 4 Low bed: * Low bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking * Supply lines are protected within the extendable beams and automatically adapt to the respective low bed length * 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beams for mounting bolted RUD rings Rear chassis: * Rear chassis with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) * 1 pair of lashing rings, lying flat in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, lying flat in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins to secure in the raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tool Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion * Load index (146/146F) Brake system: * Wabco brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Paintwork: * Entire steel structure automatically blast-cleaned after welding using a shot blasting unit * Second blast treatment with corundum for optimum coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection * Final paint finish with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL system 841GL Gsdpsxbmprefx Aaxjbw Including the following accessories: * Preparation for installation of bolted container placements for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote-controlled steering from the front and rear via cable remote with push buttons, with axle tracking control (without installation on the tractor unit) * Electro-hydraulic unit * On the gooseneck, removable aluminum side and rear walls, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (superstructure length approx. 2,120 mm) * Hydraulic connections from the gooseneck to the low bed via multi-coupling instead of screw couplings (no guarantee on seals) * Separate air connection with air gun on gooseneck * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of boltable lashing rings M20 (LC 5,000 daN) * 2 pairs of boltable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm per side, widening planks made of hardwood. The maximum load is distributed on an area of appr

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our entire inventory of immediately and short-term available vehicles on our website. Excerpt from the features. Complete list of features available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 1,000 mm x 8° * 5 pairs of folding lashing rings on the outside (LC 5,000 daN) * 3 pairs of folding lashing rings on the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with checker plate Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tires: * 245/70 R 17.5 3PMSF tires, load index (146/146 F) * Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit is via standardized EBS interface per ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel construction is automatically blasted after welding by shot blast machine Gbodpfx Ajxbmpfjaxjw * Second blasting with corundum for optimal coating adhesion * Final paintwork: 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red per RAL system 841GL * Rims in silver gray * Rear panel metallized and painted in RAL 9010 (pure white) * No metallic paint available * Paint system tested by salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash in sync with the indicators * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Electro-hydraulic unit * Remote steering control, operated from both front and rear via cable remote with push buttons, with single-track axle control (without installation in the tractor unit) * Galvanized folding supports under the rear ramp of the loading platform * 1 pair of recessed lashing rings along the main longitudinal beam at the rear ramp (LC 10,000 daN) * On the gooseneck, removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized socket stakes are removable. (Upper body length approx. 2,560 mm) * 1 galvanized toolbox, integrated into the sloped gooseneck * 3 pairs of WADER container pockets in the loading platform for one 20' (30?) or one

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Equipment: ABS, Further vehicles available at Excerpt from the equipment. Complete equipment details available on request. Gooseneck: Gooseneck in SNT design for optimization of loading platform length, approx. length 3,750 mm. Gooseneck hydraulically liftable/lowerable as well as detachable. Technical fifth-wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 Lowbed: Lowbed with external beams in extendable SUPER LOW design, approx. length 6,850 mm. Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking system. The supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length. 5 pairs of lashing rings foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear running gear: Rear running gear with closed outer frame, tread plate covering and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings foldable outwards (LC 10,000 daN). 1 pair of lashing rings horizontal in the recess LC 16,000 daN. 1 pair of lashing rings horizontal in the recess LC 10,600 daN. 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame. PENDLE-AXLE: PENDLE-AXLE, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and locking pins to secure in the raised position. Final painting of the axles with 2 coats of 2K paint in solid FAY-Grey-34-0260. Technical axle load: 12,000 kg each Hydraulic axle compensation. Axle tools. Tyres: Tyres 245/70 R 17.5 3PMSF – tyre make at our discretion. Load index (146/146F) TPMS: TPMS tyre pressure monitoring system per ECE R 141. Brake system: Wabco brake system conforming to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash together with the indicator. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel structure made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: Complete steel structure is automatically shot-blasted by turbine system after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. Final coat with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red in accordance with RAL system 841GL. Including the following additional equipment: - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high. - Remote steering from front and rear via cable remote control with push buttons, axle single-track monitoring (without installation in tractor unit) - Electro-hydraulic aggregate. (± 45kg) 2 pairs of bolted container locks on the external beams. Including 2 pairs of container locks for either 1x 20' or 1x 40' container On the gooseneck, aluminum sidewalls and rear panel, removable, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body lengt Gjdpfjxbmn Uex Aaxebw

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, Equipment: ABS, More vehicles available at Extract from the equipment features. Complete equipment list upon request. GOOSENECK Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10°. For tractor units: 4x2, 6x2, and 6x4. - Removable steel bulkhead, approx. 400 mm high - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power unit for controlling hydraulic operations, except for hydraulic winches - Outer longitudinal beams of the gooseneck with mounting holes for bolted lashing rings. The first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN). - 1 pair of flat lashing rings at the rear section of the gooseneck (LC 10,000 daN). - On the gooseneck: 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish. - On the gooseneck: 1 detachable ALU rear wall, approx. 400 mm high, anodized finish. - Over the gooseneck: approx. 40 mm thick hardwood flooring, checker plate over the kingpin. - 3.5 inch kingpin - Gooseneck guiding plate for the fifth wheel, approx. 500 mm wide. - Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining springs hanging on the outer beams of the gooseneck (LC 5,000 daN). LOAD PLATFORM Extendable load platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10°. Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines protected inside the extendable supports and automatically adapt to the current platform length. - BPW axles and suspension, 1st axle steerable, all other axles hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock, activated by reverse gear and manually. Technical axle load: 12,000 kg each. Air suspension with raising and lowering valve. - 235/75 R 17.5 3PMSF twin tires - Brand of our choice - Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = 50,000 kg - Continuous and between the axles interrupted approx. 50 mm thick hardwood flooring on the load platform (for increased friction coefficient). - Oblong holes for attachable and repositionable bridging elements: - In the front of the platform - 1 sliding intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. - Front and rear with oblong holes for attachable and repositionable bridging elements. - 1 pair of lashing rings on the front cross member (LC 10,000 daN). - 7 pairs of recessed lashing rings in the outer frame of the platform, tiltable outwards (LC 10,000 daN). - Extensions (galvanized) extendable by approx. 230 mm per side (without timber planks). - 1 pair of mechanical rear supports. - Remote steering control from front and rear by cable remote, with single-track axle monitoring, no installation required on the tractor unit. - TPMS tire pressure monitoring sensors installed on all wheels - Platform locking with conically welded locking profiles every 500 mm. - Lock monitoring left and right at the semi-trailer. - For the intermediate table, approx. 300 mm wide, a mechanical lock for securing the table in the extension. - 5 pairs of threaded blocks on the extendable support for mounting bolt-on M20 rings (LC 5,000 daN). B Gbedpfx Aasxarmajxjw