Used Faymonville Standard Body Trailers for sale (183)

Condition: new, empty load weight: 12,300 kg, maximum load weight: 37,200 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,480 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -Hardwood covering 30 mm thick Two-piece steel ramps: -A pair of galvanized two-part steel ramps approx. 3,185x1,420x1,250 mm with grating decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Two-part steel ramps: -One pair of galvanized two-part steel ramps approx. 3,185x1,420x1,250 mm with grating covering -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear -Maximum load per pair: 30,000 kg Loading area: -Loading surface with rear slope of approx. 1,000 mm x 8° -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Axles and tires: -BPW axles and suspension, two axles rigid, one axle self-steering -Air suspension with lifting and lowering valve The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -235/75 R17.5 3PMSF tires Accessories included: -1 Spare wheel with holder -TPMS tire pressure monitoring system according to ECE R 141 -2" kingpin -Galvanized steel bulkhead -Yellow-red air couplings on the galvanized front connecting strip -4 restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -3 height aluminum boards -Galvanized folding supports under the bevel of the cargo bed Height-adjustable tarpaulin superstructure (3,960 mm) -Galvanized bulkhead with a tensioning mechanism for the sliding curtain -Height-adjustable by approx. 400 mm -"EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall -3 pairs of sliding stanchions in the loading area -The body can be hydraulically widened at the rear to the left and right by approx. 750 mm -Sliding roof with pivoting portal support -Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals -Height top edge of body approx. 3,960 mm -Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin -Cover plates to bridge the free space between ramps and loading area -Electric hydraulic unit at the rear, under the cargo bed Tedpfx Agotvfkfomsc -On the gooseneck and on the ramps on the left and right, one bracket each for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle -Grating in the bevel of the loading area C40/4 (point load 3.4 tons on an area of 20 x 20 cm) -One INOX toolbox 565 x 290 x 810 mm in the direction of travel on the right between the axles -A layer of sand painted onto the chequer plates on the gooseneck and on the loading area to prevent slipping -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, Year of construction: 2007, 2007 | Faymonville STBZ3 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 32500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 12 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Tiltable bed trailer, with some body work to do. Has its own hyd-agregat. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40866 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Tsdpjznmclsfx Agmjc

Condition: good (used), functionality: fully functional, empty load weight: 10,320 kg, maximum load weight: 34,680 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2005, Manufacturer: Faymonville Type: IL2 / 3 Axle Year: 2005 Tare weight: 10,320 kg Payload: 34,680 kg Tedpfx Aez D Dvlogmoc Gross vehicle weight: 42,000 kg Length: 13.30 m

Condition: used, axle configuration: 3 axles, first registration: 12/1997, loading space length: 16,800 mm, loading space width: 2,550 mm, loading space height: 850 mm, Year of construction: 1997, Equipment: ABS, FAYMONVILLE LOWBED TRAILER / EXTENDABLE / PLATFORM / STEERING AXLES / WINCH - - MODEL: STN-3A GVW: 38,000 KG CURB WEIGHT: 9,300 KG 3 AXLES SAF AXLES STEERING AXLES WINCH LEAF SPRING SUSPENSION DECK HEIGHT FROM GROUND: 0.85 M DECK HEIGHT ABOVE BEAMS: 1.35 M TRAILER LENGTH (RETRACTED): 13.2 M TRAILER LENGTH (EXTENDED): 16.8 M LOADING WIDTH: 2.55 M BEAM LENGTH: 4 M TYRES: 235/75 R17.5 IMPORTED NOT USED IN THE COUNTRY 100% ACCIDENT-FREE - NET PRICE: 16,900 EUR - - FULL OFFER OF OUR COMPANY ON THE WEBSITE: Tjdpfeybn Iwsx Agmsc DETAILED PHOTOS AND VIDEO CAN BE SENT VIA WHATSAPP, VIBER OR EMAIL FOR MORE INFORMATION, PLEASE CONTACT US BY PHONE. WE SPEAK THE FOLLOWING LANGUAGES: - Polish, English, German, Romanian, Spanish, Italian, French, Turkish, Hungarian, Slovak, Slovenian, Russian: - Ukrainian, Lithuanian, Latvian, Estonian, Uzbek, Georgian, Armenian, Azerbaijani, Turkmen, Serbian, Croatian, Bulgarian, Czech: -

Condition: used, machine/vehicle number: YAFTL208100007948, axle configuration: 2 axles, loading space length: 10,600 mm, loading space width: 2,550 mm, loading space height: 1,010 mm, Year of construction: 2008, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Drum brake system = Additional Information = Weights Tjdpfjziivwjx Agmec Unladen weight: 11,660 kg Payload: 26,340 kg GVW: 38,000 kg Condition Overall condition: average Technical condition: average Optical condition: average Additional Information Condition of front tires: 70% Front tires: 245/70 R17.5 Rear tires: 245/70 R17.5 Last inspection: 2026-06-29 Additional Information Please contact Lastas Sales for further information.

Condition: new, empty load weight: 10,300 kg, maximum load weight: 39,200 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface can be raised and lowered hydraulically after the gooseneck Length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8° Cut-outs in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Todou Hp Hrspfx Agmsc Axles, suspension and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes -Galvanized folding supports under the bevel of the cargo bed -A bracket for a rotating beacon at the rear of the trailer -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -One bracket for the warning signs on the gooseneck and on the ramps on the left and right, including socket -Control valves for the ramps fitted on the right-hand side of the trailer -European reflector signs (red/yellow) at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -An electric cable winch with radio remote control approx. 5,400 kg lifting force, including 9.5 mm thick wire rope 24 m long with rope guide roller -Screwed 5to ring for reeving the cable winch cable on the neck without deflection pulley -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition -7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) -1 pair of recessed lashing rings along the central beam at the rear of the bevel (LC 10,000 daN) -A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm -Speed sticker 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation Tjdpeyib Ahjfx Agmsc * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Tsdpfoxbmplex Agmec Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer Tsdpfxol Uxdks Agmjc A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: new, maximum load weight: 38,100 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5 3PMSF, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading area: 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: JOST seat posts with 2-speed gearbox for 24 t lifting capacity Axles and tires: BPW axles, two axles rigid two axles self-steering, air-sprung, with drum brake, with raise/lower function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 205/65 R17.5 3PMSF Brake system: WABCO brake system in accordance with EU regulations with EBS-E Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component Top coat single color in MB 7350 nova grey No metallic paint finish possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Yellow-red air couplings on the galvanized connection strip at the front 4 brake shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Galvanized folding supports under the bevel of the cargo bed A holder for a rotating beacon at the rear of the trailer Height-adjustable tarpaulin body Galvanized bulkhead with a tensioning mechanism for the sliding curtains Height-adjustable by approx. 400 mm Tsdpfx Ajtphtmsgmec "EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall 3 pairs of sliding stanchions in the loading area The body can be hydraulically widened at the rear to the left and right by approx. 750 mm Sliding roof with pivoting portal support Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals Height top edge of body approx. 3,960 mm Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin Suspension strip for ALU docking lights at the rear of the vehicle A holder for the warning signs including socket on the gooseneck and on the rear panel on the left and right respectively A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load condition Rear body closed with ALU hinged doors A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping BEKAMAX central lubrication system with NLGI-2 standard grease and removable protection around the pump Speed sticker 80 km/h at the rear and on both sides Load manometer to determine the axle loads including load diagram

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Todpfjyvnfgsx Agmsc Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, first registration: 06/2017, total length: 7,000 mm, total width: 2,500 mm, total height: 880 mm, suspension: air, tire size: 235/70 R17.5, tire condition: 75 %, color: other, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - 2 axles - Air suspension = More information = Axle configuration Tyre size: 235/70 R17.5 Tyre profile: 75% Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 10500 kg Rear axle 2: Double wheels; Max. axle load: 10500 kg Weights GVW: 21.000 kg Tsdpfx Aoz Azd Tjgmoc Condition Technical condition: very good Visual appearance: very good Identification Registration number: QALO590

Condition: used, color: red, Year of construction: 2015, Faymonville F-S43-1A1Y. Year: 2015. 9-ton SAF axles. Weight: 10,190 kg. Maximum weight: 45,000 kg. Kingpin load: 18,000 kg. 5.75m extendable. Power steering, 3x forced steering. Hydraulic system powered from the trailer, operates on NATO electricity. Air suspension. 1st axle is a lift axle. Dimensions: Floor: Length: 13,750 mm. Width: 2,550 mm. Height: 1,400 mm. Height (with aluminum boards): 600 mm. Tires: 385/65R22.50, 70% tread remaining. ID No.: 661 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2015 Unladen weight: 10,190 kg Payload: 34,810 kg GVW: 45,000 kg Extendable platform: Yes = Company Information = Tedpfozyaxwjx Agmoc For more information:

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Todpfx Agexxkqzomjc Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. - .

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2007, total length: 15,430 mm, total width: 2,550 mm, total height: 3,050 mm, suspension: air, tire size: 235/75R17,5, color: red, Year of construction: 2007, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Faymonville SPZ-4AAAX. Year of manufacture: 2007. 10-ton BPW axles. Unladen weight: 14,500 – 16,000 kg. Max. total weight: 65,000 kg. Kingpin load: 25,000 kg. Hydraulic connection according to NATO standard. Forced steering (4 steering axles). 1st axle designed as a lift axle. Air suspension. Galvanized. Storage boxes. EBS, ABS, ALB. 3-way extendable. Total extension: 25.1 meters. Total length: 40.3 meters. Dimensions of loading area: Gooseneck: L: 4300 mm. W: 2550 mm. H: 1500 mm. Kingpin height: 1200 mm. Loading area: L: 10,730 mm. W: 2550 mm. H: 1200 mm. Tires: 235/75R17.5 (tread depth 70%). Dimensions: L: 15,430 mm. W: 2550 mm. H: 3050 mm. Tsdez Df Iispfx Agmjc German trailer! 3 UNITS AVAILABLE!! ID No.: 563. Heinhuis's general terms and conditions apply to all advertisements, offers and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the applicability of Heinhuis's general terms and conditions and confirm that you have taken note of these conditions. Our prices are net export prices. = Additional Information = Axle Configuration Tire size: 235/75R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Dual tires; Lift axle; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Dual tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 3: Dual tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 4: Dual tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 14,500 kg Payload: 50,500 kg GVW: 65,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request = Company Information = For more information:

Condition: new, empty load weight: 14,800 kg, maximum load weight: 61,700 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area: -Loading area in extendable design with rear bevel of approx. 500 mm x 8° -9 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 1st axle self-steering, 2nd + 3rd axle rigid, 4th + 5th axle self-steering. -Technical axle load: 12,000 kg -1.4th and 5th axle with electro-magnetic reverse lock via reverse gear and manual activation -235/75 R 17.5 3PMSF tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) Steel construction: -steel construction made from high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) Tjdjma Hf Rspfx Agmec -S690QL/S700MC (yield strength 690MPa) Accessories: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -2 pieces of restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized extensions, extendable by approx. 230 mm on each side -One bracket for a rotating beacon at the rear of the trailer -Galvanized supports under the bevel of the loading area -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -3 pairs of WADER container pockets in the loading area for a 20ft (30ft) or a 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Sliding suspension rails for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the sloping loading area -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -One bracket for rotating beacon on the warning signs -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: reconditioned (used), functionality: fully functional, empty load weight: 20,000 kg, maximum load weight: 120,000 kg, axle configuration: 3 axles, tire condition: 70 %, color: red, Year of construction: 2006, 3 liftable and steerable axles. Hydraulic suspension Height-adjustable gooseneck Todoyaaz Hjpfx Agmoc Hartz auxiliary petrol engine Independent wireless steering control Hydraulic rear ramps for machine loads up to 70 tons

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Tjdpfexf Silox Agmjc - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: excellent (used), first registration: 05/2016, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = - Air suspension Tedez Ib Erspfx Agmsc = Further Information = Unladen weight: 12,330 kg Payload: 28,670 kg GVW (Gross Vehicle Weight): 43,000 kg Loading platform height: 45 cm Technical condition: very good Optical condition: very good Damage: none

Condition: new, empty load weight: 10,600 kg, maximum load weight: 39,400 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, operation weight: 10,600 kg, Equipment: ABS, Gooseneck: -Gooseneck with hardwood covering, 30 mm thick -Gooseneck at the rear, straight design -3 pairs of lashing rings (LC 5,000 daN) Loading area in extendable design: -Loading area in extendable design -5 pairs of lashing rings that can be folded outwards -3 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the front of the loading area -Cutouts in the outer frame of the loading area for hanging tensioning straps -Hardwood covering, approx. 48 mm thick, checkered sheet covering over the axles Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: -BPW axles, two axles rigid, two axles with self-steering -Air suspension, with drum brake, with lifting/lowering- Function -The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually -Axle tool -Tires 205/65 R17.5 Braking system: -Braking system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -Steel construction made of high-strength fine-grain steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volts, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets -Connection in accordance with ISO: -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Painting: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and painted in RAL 9010 (pure white) Accessories included: -A spare wheel with holder in front of the bulkhead -2" kingpins -A galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 brake shoes with holder on the bulkhead -Galvanized folding supports under the bevel of the loading area -A bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm on each side -White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel on the left and right, a holder for the warning signs including a socket -European reflector signs (red-yellow) on the rear of the trailer -TPMS tire pressure monitoring system in accordance with ECE R 141 -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized plug-in stanchions are removable, length of the structure approx. 2,560 mm -7 pairs of WADER container bags -1x 20ft container in the loading area; 1x 40ft container in the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers Todpet Ag Uwjfx Agmoc -7 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status -Movable mounting rail for aluminum loading ramps at the rear of the vehicle -A painted layer of sand on the checker plates on the gooseneck and on the loading area to prevent slipping -Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A holder for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -L

Condition: used, overall weight: 44,000 kg, axle configuration: 2 axles, first registration: 04/2018, Unladen weight: 11,800 kg W = 12,000 mm Extendable forward for front loading of the attached flatbed trailer - Gooseneck in a compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" kingpin Tjdpfjy U Df Hex Agmec - Integrated hydromechanical steering - Hydraulic lifting and lowering function, including support cylinders - Designed for a technical fifth-wheel load of up to 24 tons - Aluminum side walls, 4-sided - Turning radius: 2,200 mm Flatbed trailer - Low-bed with external tubes - Flatbed length: 6,750 mm, telescoping to 12,250 mm (extension of 5,500 mm) - Flatbed width: 2,550 mm - Height: 200 mm - Loaded height: approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Coupling jaws at the front for connection to the gooseneck 2-axle chassis - Chassis in a compact design - Air-suspended chassis (L x W): approx. 2,750 x 2,550 mm including lifting and lowering valve, with 2 forced-steered axles, manufacturer BPW, track width 1,330 mm - Chassis with kingpin recess Braking system - Two-line, all-wheel air brake system - Progressive central lubrication system - Remote control - Loaded fifth-wheel height: 1,250 mm - All 2 axles hydraulically forced-steered

Condition: good (used), axle configuration: 3 axles, first registration: 12/2007, suspension: air, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Unladen weight: 12,940 kg Payload: 21,060 kg GVW: 34,000 kg Technical condition: good Tedozvzt Ijpfx Agmoc Optical condition: good Vehicle number: Low-bed trailer: 15 Faymonville / 3 axles, steerable, with remote control SAF / Extendable .: YA9TL35F02113453 SAF 3 x Steerable axles with remote control Unladen weight: 12,490 kg Total weight: 34,000 kg Length: 9.20 m, with extension 15.10 m + extension 20.40 m, total length 24.40 m Width: m = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 02/2012, Year of construction: 2012, Equipment: ABS, * Faymonville STN-4UBX low-bed trailer * First registered: 02-2012 * Hydraulic lifting system * Hydraulically adjustable double folding ramps Tedpfx Agezuraismec * Including winch with remote control * 3rd and 4th axles with trailing steering * SAF axles * Air suspension * Drum brakes * Payload: 11,900 kg * Tires 235 / 75 R 17.5 * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: new, empty load weight: 9,600 kg, maximum load weight: 53,400 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,540 mm, loading space height: 1,340 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Equipment: ABS, Loading area: -Loading area with approx. 30 mm thick hardwood floor -10 pairs of lashing rings can be folded outwards Seat posts: -JOST seat posts with 2-speed gearbox for 24 t lifting load Axles and tires: -BPW axles, techn. 10,000 kg, first axle rigid, all other axles hydro-mechanically forced steered, mounted on turntable -Air-sprung with lifting and lowering valve -axle tool -385/65 R22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC -S690QL/S700MC Electrical system: -Electrical system in accordance with EU regulations, 24 volt lighting -ASPÖCK UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: -First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in a single color in nova grey -Rear part metallized and painted in RAL 9010 Accessories included: -Loading area with approx. 30 mm thick hardwood floor -2" kingpin -One galvanized steel end wall approx. 1,200 mm high EN12642-XL -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the front wall -Storage for 1,000 mm stanchions in the rear central support -On the gooseneck and on the rear panel on the left and right, one bracket each for the warning signs including socket -Reverse steering can be operated from the front and rear via cable remote control using pushbuttons, with tracking control of the axles -Electric hydraulic unit -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -12 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -European reflector plates at the rear of the trailer -One bracket for a rotating beacon at the rear of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -TPMS tire pressure monitoring system: -For correct display, the motor vehicle must be able to transmit and display this data -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control -5 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Speed stickers 80 km/h at the rear and on both sides -Adjustable access ladder mounted on the left and right in the direction of travel -2 reversing lights mounted on the rear panel -Load manometer for determining the axle loads including load diagram Tedpforq Dlfjx Agmjc HRM metallization of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 13,500 kg, maximum load weight: 51,500 kg, overall weight: 69,500 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading area length, length approx. 3,700 mm Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading area: Telescoping loading area, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° Recess in the bevel and extending into the loading area for accommodating the excavator boom foot Pneumatic locking system with tapered pin and reinforced locking positions The supply lines are protected in the extendable beam and adapt to the respective loading area length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp ends Ramps can be individually hydraulically moved outwards by approx. 235 mm and inwards by approx. 215 mm Axles and Suspension: BPW axles and suspension, two axles fixed, two axles with trailing arm steering Electromagnetic parking brake activated via reverse gear and manually Air suspension with raising and lowering valve Axle tool Tires: 235/75 R17.5 3PMSF, dual tires Load index: 143/141J (144/144F) Braking System: Braking system from WABCO, EBS-E according to EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metallization: Standard HRM metallization of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (Zinc 85% - Aluminum 15%) Steel Construction: Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified according to DIN-EN 287-1 Welding process MAG according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included Accessories: Steel front wall, pluggable, height approx. 400 mm ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pin 24N connection according to ISO-1185, 24S connection according to ISO-3731, 15-pin connection according to ISO-12098 Round NATO socket on the connection strip at the front Cable for supplying the electro-hydraulic unit and/or the electric winch (35 mm2, 3.5 m long) between the semi-trailer and the drawbar trailer with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with mounting holes for screwable lashing rings, the first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screwable lashing rings included One mounting hole in the rear upper area of the outer beam of the gooseneck for a screwable lashing ring 1 pair of screwable lashing rings Approx. 40 mm thick hardwood flooring above the gooseneck Tedpok Ahugefx Agmoc On the gooseneck, 1 pair of pluggable aluminum side panels, approx. 400 mm high, anodized On the gooseneck, one pluggable aluminum rear panel, approx. 400 mm high, anodized 2" kingpin Guide plate of the gooseneck for the saddle plate, approx. 500 mm wide 4 support wedges with holder Mounting for aluminum approach ramps Mechanical saddle supports with 2-speed gearbox and crank On the loading area, a continuous and interrupted between the axles hardwood flooring, approx. 50 mm thick Locking of the loading area with tapered welded locking profiles every 250 mm incl. pre-tensioning plate Elongated holes for hanging and adjustable bridging elements on the loading area at the front 1 intermediate table with recessed loading area, approx. 300 mm wide for the extension tube with large cross-section with sheet metal covering At the front and