Used Faymonville Semitrailers With Work Platform for sale (199)

Condition: new, overall weight: 55,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Year of construction: 2025, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full specification available on request. LOAD AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Load floor in double-extendable design, length approx. 9,300 mm * A support plate approx. 200 mm wide is permanently welded to the center beam * Pneumatic locking system with conical locking pin and reinforced locking positions, supply lines are protected within the extendable beams and automatically adjust to each load floor length (except for the supply to the first lock) * Technical fifth wheel load: 25,000 kg For tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lowering valve * 275/70 R 22.5 3PMSF twin tires. Brand of our choice * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connectors on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards * At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted in the load floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1x rear of the gooseneck * 2" kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm hardwood floor on gooseneck and load area enclosed in ALU-omega profiles * 10 pairs of recessed lashing rings in the outer frame of the load area, foldable outwards: - one pair in front of the last axle and at the rear cross member of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm Bedpsxc Axxjfx Ah Tewi * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel * Remote steering (front and rear) operable via cable remote control, with single-track tracking of the axles, without installation in the tractor unit * Steel front wall, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connector * 3 transverse stake pocket rails mounted in load floor of load area, for plug-in stakes approx. 100 x 50 mm * 1 additional removable platform, approx. 500 mm wide, for large cross-section sliding tube, with hardwood covering * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the right in direction of travel * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel * WADER container pockets in the load area for transport of: 1x 20' container at weight center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Condition: new, maximum load weight: 49,250 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available on request. LOAD AREA: * Gooseneck, approx. 4,300 mm length, with central beam * Load area in triple extendable version, approx. 9,300 mm total length * On the central beams, a fixed welded support plate approx. 200 mm wide * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current load area length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 28,000 kg. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced-steered hydromechanically, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand of our choice, load index 148/145M * Steel front wall, approx. 800 mm high, certified according to EN12642 : 2016 XL. Maximum load capacity: 20,000 daN * Connection strip for supply lines to the tractor unit approx. 600 mm below the lower edge of the outer frame profile * Yellow-red pneumatic couplings at the front connection strip * ASPÖCK UNIBOX at front connection strip with sockets: 24N, 24S & 15-pin. 24N according to ISO 1185, 24S according to ISO 3731, 15-pin according to ISO 12098 * 3 kW electro-hydraulic unit for hydraulic operations * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, fold outwards (LC 10,000 daN) * 4 pairs of stake pockets in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar transversely mounted in the gooseneck floor, for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck * 3.5-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * On the gooseneck and load area: approx. 32 mm wooden floor embedded in ALU omega profiles * On the large cross-section extension tube: one locking position approx. every 1,000 mm * On the medium cross-section extension tube: one locking position approx. every 3,000 mm and at maximum extension * On the small cross-section extension tube: one locking position approx. every 3,000 mm and at maximum extension * This results in one locking possibility approx. every 1,000 mm Bodpfx Ajyg T Hpoh Tjwi * 10 pairs of recessed lashing rings in the outer frame of the load area, fold outwards (LC 10,000 daN) * 9 pairs of stake pockets in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 2 transverse stake pocket bars mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 2 wheel chocks with holder under the load area * Access ladder mounted on the right in the direction of travel * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air spring vent activated when parking brake is applied * Under the gooseneck and at the rear crossmember left and right, one 7-pin socket each for warning panels * One 7-pin socket at rear crossmember * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Cable for the electrical supply

Condition: used, maximum load weight: 36,755 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire stock of vehicles, including those available immediately or at short notice, on our website. Excerpt of equipment features. Full specification available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * 10 pairs of folding lashing rings (LC 2,500 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Loading width approx. 2,480 mm Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW air-suspended axles with disc brakes (approx. 430 mm), with lift/lower function (ET 120) * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle toolkit Tyres: * 385/65 R 22.5 tyres Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 carmine red * Rear section metallised and coated in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection rail Bjdpfx Ahjya Shlo Tswi * 2" king pin * Yellow reflective tape to EU regulations, fitted to sides, extension and rear of trailer * European reflective warning boards (red-yellow) at the rear of the trailer * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * Holder for approximately 1,000 mm long stakes, mounted at rear central beam * 1 spare wheel holder under the loading platform, left side * Bracket for rotating beacon at the rear of the trailer * At the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Load pressure gauge for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Folding aluminium side boards with rear double-wing doors (anodised), on the sides of the loading platform, approx. 600 mm high, with KINNEGRIP folding posts * Holder for aluminium side boards, mounted under the platform before the axles * Holder for KINNEGRIP posts, under the platform behind the axles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, fitted to the outer frame of the platform * Rear underrun protection, left and right on the rear traverses * 6 pairs of WADER container locks in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 1 INOX toolbox, approx. 600 x 350 x 600 mm, fitted under the platform left side * 4 pairs of stake pocket strips fitted longitudinally on the loading platform, for plug-in stakes 100 x 50 mm * Lifting axle on the front axle, controlled by TEBS E in line with current axle load and loading condition * On the warning boards, holder for beacon * Acoustic reverse warning signal * 2 LED reversing lights mounted on rear panel * HRM (High Resistance Metallisation) metallisation of outer frame

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Loading area: * Loading platform in double-extendable design with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice Axles: * BPW axles, hydro-mechanically forced steering * Air suspension with lift and lower valve * Axle tool kit Brake system: * Brake system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Top quality, long-lasting corrosion protection of the standard shot-blasted welded chassis, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-colour in RAL 3002 carmine red * Rear section metallised and painted in RAL 9010 (pure white) * Wheel rims in silver * Metallic paintwork not possible Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets; connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including accessories: * Remote steering from front and rear via cable remote control with push buttons, with single-track axis control (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with bracket on front wall * 2-inch king pin * Yellow-red air couplings on galvanised front connection panel * Yellow reflective tape according to EU regulations – on the sides, on the sliding extension and at the rear of the trailer * European reflective warning plates (red-yellow) at the rear of the trailer * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Loading area with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stakes, 100 x 50 mm, in the outer frame * Bracket for rotating beacon at the rear Bwodpfjk Ugacsx Ah Tji * Galvanised supports under the loading area taper * Bracket for rotating beacon at the rear * Hook-in profile for ALU loading ramps at the rear of the vehicle * 80 km/h speed stickers, rear and both sides * Load gauge for axle load determination, including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable guard around the pump * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Anti-slip sand layer painted onto the centre beam * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; in the extension, an additional ...

Condition: used, maximum load weight: 36,650 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 11/2025, Equipment: ABS, Excerpt of Equipment Loading Platform: Loading platform in extendable design with pneumatically operated locking mechanism. 2 pairs of horizontal lashing rings (LC 5,000 daN). 1 pair of lashing rings in the neck (LC 10,000 daN). 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN). Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: Tyres 245/70 R 17.5 – brand of our choice. Load index (146/146F). Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tool kit. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Coating: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) top coat, single color in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with socket outlets 24N, 24S & 15-pin. Connections compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Boards: On the gooseneck and rear plate, a holder for warning boards each, including socket outlet, left and right. Includes the following additional equipment: - Rear steering controllable from the front and rear via cable remote control with push buttons, including single-track axle monitoring (without installation in the tractor unit) - Electro-hydraulic power pack. (± 45kg) - 4 wheel chocks with holder at the front wall. (± 5kg) - 2-inch kingpin - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high. (± 35kg) - Yellow-red air couplings on the galvanized connection strip at the front. - Yellow reflective tape according to EU regulations on the side, on the extension and at the rear of the trailer. - European reflector plates (red-yellow) at the rear of the trailer. - A mudflap at the rear of the trailer. - Manual and description on USB stick. - A bracket for a rotating beacon at the rear of the trailer. - Loading area with heavy-duty hardwood floor. - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm located in the outer frame of the loading platform. (± 27kg) - Extensions, galvanized, extendable by approx. 230 mm per side. (± 230kg) - Spiral cable for powering the electro-hydraulic pack and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with socket connection (NATO-NATO) - Galvanized supports under the bevel of the loading area. - On the central beam, a painted sand coating as anti-slip protection. - 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90kg) - 4 pairs of transverse stake pocket strips, mounted acro Bwsdpfx Aox Epzneh Tei

Condition: used, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment. Complete equipment list available upon request. Loading Platform: * Gooseneck, approx. 4,100 mm long, with central beam * Loading platform in double-extendable design, approx. 9,400 mm long, with pneumatically operated locking mechanism * A fixed intermediate table, approx. 200 mm wide, is welded to the central beam * Supply lines are routed protected inside the extendable beams and automatically adapt to the respective loading platform length (exception: supply to the first locking mechanism) * For tractor units: 4 x 2 and 6 x 2 Axles and Suspension: * BPW axles and suspension, all axles hydro-mechanically force-steered, mounted on turntables * Technical air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres * Brand of our choice. Load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system according to EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%) Painting: * 6-coat final treatment: Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2-component acrylic paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Wheel rim colour: Silver grey * Lamp bracket colour: RAL 9010 Pure White Included Accessories: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Max. load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the gooseneck outer frame: the front 3 pairs fitted horizontally (LC 10,000 daN), rear pair fold-out to the outside (LC 10,000 daN) * 4 pairs of stake pockets set into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear in the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * 4 wheel chocks with holders in front of the front wall * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B, static test bearing capacity approx. 50,000 kg * On gooseneck and loading platform, wooden flooring approx. 32 mm thick, framed in aluminium omega profiles * Large cross-section extension tube with a locking point every approx. 500 mm * Small cross-section extension tube with a locking point every approx. 1,000 mm, providing a locking interval of approx. 500 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the loading platform, fold-out to the outside: one pair before the last axle and one pair at the end crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading platform floor for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier under the loading area on the right-hand side (direction of travel) * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left (direction of travel) * Access ladder mounted on the right (direction of travel) * Last axle with air bellows venting activated by operating the parking brake * 3 kW electr Bodpfxow E A Egj Ah Tswi

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E Bwedpfx Aowvzg Roh Tji - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Bedoxgk U Nspfx Ah Tswi Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: Bwsdpfexttc Aox Ah Tei * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: Bsdexl Nf Dspfx Ah Tewi * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit Bwsdpfsw Tpr Isx Ah Tei * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: used, axle configuration: 3 axles, first registration: 09/2024, loading space length: 10,790 mm, loading space width: 2,550 mm, loading space height: 930 mm, total length: 11,920 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: grey, Year of construction: 2024, = Additional options and accessories = - Floor Material - Security rings = More information = Axle configuration Tyre size: 245/70R17.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Axle 1: Alloy wheels; Lift axle; Tyre profile left: 100%; Tyre profile right: 100% Axle 2: Alloy wheels; Tyre profile left: 100%; Tyre profile right: 100% Axle 3: Alloy wheels; Steering; Tyre profile left: 100%; Tyre profile right: 100% Weights Empty weight: 11.100 kg Carrying capacity: 46.400 kg GVW: 57.500 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle Bwedpfx Ahjxylb Ds Toi • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 7,490 mm, loading space width: 1,550 mm, loading space height: 3,470 mm, total length: 10,050 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, color: other, Year of construction: 2018, = Additional options and accessories = - Door opening height: 359 - Door opening width: 192 - Rear door type: double_doors = More information = Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Alloy wheels; Tyre profile left: 40%; Tyre profile right: 40% Axle 2: Alloy wheels; Tyre profile left: 30%; Tyre profile right: 20% Bwjdpfxsympi Hj Ah Tsi Axle 3: Alloy wheels; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 6.060 kg Carrying capacity: 32.940 kg GVW: 39.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2015, loading space length: 9,530 mm, loading space width: 1,565 mm, loading space height: 1,650 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, Concrete inner loader, loading length: 9530 mm, loading width: 1,565 mm, angle profiles in the loading area for pallet accommodation, hydraulic load securing, 6 heavy-duty lashing rings per side, NATO jump-start socket, ABS, EBS, BPW Eco axle(s), drum brake system, front drop supports, vehicle may have advertising stickers and/or lettering. Bsdpfxoymu Iuo Ah Tewi SI86628 Our offer generally does not include new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide you with an offer from our partner workshops! Vehicle may be provided with advertising stickers and/or lettering. Our general terms of delivery and payment apply. We are happy to create a financing or leasing package for this item. Please contact us!

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2007, loading space length: 9,550 mm, loading space width: 1,570 mm, loading space height: 1,650 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, Concrete inner loader, loading length: mm, loading width: 1,530 mm, angle profiles in the loading area for pallet accommodation, hydraulic load securing, 5 heavy-duty lashing rings per side, external jump start socket (NATO), ABS, EBS, BPW Eco axle(s), drum brake system, drop-down supports at the front. Vehicle may feature advertising decals and/or lettering. SI86625 Bodpfeymu Inox Ah Towi Our offer generally does not include a new TÜV inspection. Should you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops! Vehicle may feature advertising decals and/or lettering. Our general delivery and payment conditions apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, axle configuration: 3 axles, loading space length: 13,590 mm, loading space width: 2,520 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2026, = Additional options and accessories = Bwsdpjyli Nwsfx Ah Tsi - Floor Material - Security rings = More information = Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Axle 1: Steering; Tyre profile left: 100%; Tyre profile right: 100% Axle 2: Steering; Tyre profile left: 100%; Tyre profile right: 100% Axle 3: Steering; Tyre profile left: 100%; Tyre profile right: 100% Weights Empty weight: 11.475 kg Carrying capacity: 36.525 kg GVW: 48.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,900 mm, loading space width: 2,560 mm, loading space height: 1,970 mm, total length: 13,900 mm, total width: 2,560 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2025, = Additional options and accessories = - Capacity of the superstructure: 33865 (The total capacity of the superstructure.) - Floor Material - Lifting roof - Security rings = More information = Tyre size: 245/70R17.5 Make axles: BPW Eco plus Suspension: air suspension Axle 1: Steering; Tyre profile left: 90%; Tyre profile right: 90%; Brakes: drum brakes Axle 2: Steering; Tyre profile left: 90%; Tyre profile right: 90% Axle 3: Steering; Tyre profile left: 90%; Tyre profile right: 90% GVW: 59.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle Bedpfxsxu H Uhs Ah Tewi • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 11/2023, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Year of construction: 2023, Equipment: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Load Area: - Extendable platform - Platform with hardwood planks and rear bevel approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN) Bedjyapctjpfx Ah Towi Brake System: - Brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in a single color Novagrau (Nova Grey) - Rear section metallized and painted in RAL 9010 (Pure White) Axles and Tyres: - BPW axles, air suspension, with 377 mm disc brakes, with lift/lower function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 - TPMS tire pressure monitoring system Accessories Included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" kingpin - Galvanized steel front wall approx. 1,600 mm high, extendable to 2,200 mm - White reflective tape as per EU regulations on the sides, on the extension, and red at the rear - Load area with heavy-duty hardwood floor - 9 pairs of stake pockets for 100 x 50 mm stanchions in the outer frame - 1 spare wheel holder on the right (in driving direction) under the load area - Galvanized folding supports under the rear bevel - Movable hanging rails for ALU approach ramps at the rear of the vehicle - European reflector plates (red-yellow) on the rear of the trailer - Mudflap at the rear of the trailer - Mount for beacon at the rear of the trailer - On the gooseneck and rear panel left and right, each a mounting bracket for warning panels including socket - HDPE toolbox 620x360x610 under the platform on the left (in driving direction) - 4 pairs of WADER container pockets in the load area for 1x 20ft or 1x 40ft container, an additional locking position provided in the extension for a 45ft container - 3 crosswise mounting rails for 100 x 50 mm stanchions - Lift axle on the first axle controlled via TEBS E depending on actual axle load and vehicle load condition - 80 km/h speed stickers on rear and both sides - Four warning panels, each extendable by approx. 400 mm (423 x 423 mm) with an LED position light. Each panel includes a holder for a beacon - Load gauge for determining axle loads incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, defined visible areas then metallized and hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%) - Continuous galvanized storage box at the rear for mounting approach ramps or steel stanchions

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load Capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering 3 steering axles. Slitted floor. Wink. Allu boards on neck. Hydraulic from trailer works on NATO. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3000mm. Bwedpfx Ahjypcv Eo Tsi 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: Lenght: 2800 + 1700 mm. Dimensions: Neck: L: 3750mm. W: 2500mm. H: 1380mm. King pin height: 1150 mm. Floor: L: 9600mm. W: 2550mm. H: 900mm. Tires: 245/70R17.5 80%. ID NO: 436. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2013 Curb weight: 12,300 kg Payload: 29,700 kg GVW: 42,000 kg = Company information = For more information: WhatsApp:

Condition: used, color: green, Year of construction: 2015, Faymonville F-S44-1ACA. Year of manufacture: 2015. 10-ton SAF axles. Unladen weight: 22,250 kg. Payload capacity: 57,750 kg. Gross vehicle weight: 80,000 kg. Kingpin load: 40,000 kg. EBS, ABS, and ALB systems. Hydraulics powered by NATO connection from the truck. Alloy sideboards on the gooseneck. Hydraulically detachable gooseneck. Air suspension. Extendable by 5 meters. Radio remote control included. Excavator trough: 5,600 mm x 950 mm. Tyres: 235/75R17.5, 80% remaining tread. Dimensions: Neck: Length: 4,900 mm. Width: 2,500 mm. Height: 1,800 mm. Kingpin height: 1,300 mm. Deck: Length: 8,000 mm. Width: 2,750 mm. Height: 500 mm. Deck thickness: 300 mm. Rear section of trailer: Length: 5,600 mm. Width: 2,750 mm. Height: 1,050 mm. Dolly D-2. Year of manufacture: 2015. 10-ton SAF axles. Unladen weight: 3,650 kg. Gross weight: 36,100 kg. Kingpin load: 16,100 kg. Air suspension. Tyres: 235/75R17.5, 70% remaining tread. Bwodpfx Ahsypck Ao Tei German trailer! 4 units available! ID Nr.: 427. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations issued by Heinhuis, all contracts concluded by Heinhuis, and all related negotiations. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken notice of them. Our prices are export net prices. = Additional information = Year of manufacture: 2015 Unladen weight: 22,250 kg Payload: 57,750 kg Gross vehicle weight: 80,000 kg Extendable chassis: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: excellent (used), axle configuration: > 3 axles, first registration: 03/2003, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 1,620 mm, total length: 12,500 mm, total width: 2,550 mm, total height: 1,620 mm, suspension: hydraulics, tire size: 275 / 70 R22.5, color: beige, Year of construction: 2003, Axle configuration Tyre size: 275 / 70 R22.5 Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tyres; Max. axle load: 10,000 kg Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tyres; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 13,100 kg Payload: 61,900 kg gross vehicle weight: 75,000 kg Functional Loading platform height: 162 cm Condition Technical condition: very good Visual condition: very good Financial information Price: On request Bsdpfx Aheuu E S So Tewi Further information Please contact Stefan Schaapveld for more information.

Condition: used, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 11/2024, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, Year of construction: 2024, Equipment: ABS, With every used semi-trailer, you receive a current and complete inspection and function report. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long - Gooseneck rear with tapering, approx. 1,000 mm x 10° Loading Area: - Extendable loading area, length approx. 8,800 mm, with rear tapering approx. 500 mm x 10° - Recess in the loading area, extending into the beveled section to accommodate the excavator’s bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually by approx. 235 mm outward and 215 mm inward - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm along the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS Tire Pressure Monitoring System - TPMS Tire sensors Accessories included: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel Bwsdjypb Akepfx Ah Toi - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then at approx. 400 mm intervals - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - 1 pair of removable anodized ALU side boards, approx. 400 mm high, on the gooseneck - 1 removable anodized ALU rear board, approx. 400 mm high, on the gooseneck - 2" kingpin - Round NATO socket on the front connection strip - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed, fold-out lashing rings in the loading area outer frame - Extendable (galvanized) widening elements, approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuous in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements on the extension tubes of the widening sections - Widenable U-profiles for ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with axle single-wheel tracking control - 1st axle with automatic lift axle function and starting aid compliant with EU Regulation 2021/535 - Under the gooseneck and on the rear crossmember, left and right, each with a 7-pin socket and holder for warning signs - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the beveled part of the loading area - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, in addition to the cable remote - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: used, maximum load weight: 37,950 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, Our entire stock of vehicles, including those available immediately and at short notice, can be found on our website. Bwjdpsyc Axyjfx Ah Toi Excerpt from the specifications. Full list of equipment on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Area: * Telescopic loading area with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed integrated wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, as well as widenings in the lower section * Between 1st and 2nd axle, one pair of fixed integrated wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) * Recess in the chamfer and extending into the loading platform to accommodate the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 2 pairs of outward folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) * Including 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t/each Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated via reverse gear and manually * Air suspension with lift/lower valve * Axle tool Tyres: * Tyres 235/75 R 17.5 3PMSF Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Braking system as per EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single-colored in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Included Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Spare wheel bracket in front of the front wall * On the galvanized connector rail at the front, yellow-red air couplings * 4 wheel chocks with holder on the front wall * Receptacle at rear of the gooseneck for aluminum loading ramps * Galvanized folding supports below the rear chamfer of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * On the gooseneck and rear panel, left and right, a bracket for warning signs including socket * One mud flap at the rear of the trailer * Manual and description on USB stick * On the warning signs, bracket for beacons * European reflective plates (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Load gauge for determining axle loads including load chart * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) * A tool ...

Condition: excellent (used), axle configuration: 2 axles, first registration: 02/2022, loading space length: 7,550 mm, loading space width: 2,540 mm, total length: 11,200 mm, total width: 2,540 mm, suspension: air, tire size: 245/70/17.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Air suspension Bwodpfxewffibe Ah Tji = Further Information = Axle configuration Tyre size: 245/70/17.5 Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 12,000 kg Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered Weights Unladen weight: 8,250 kg Payload: 40,750 kg Gross vehicle weight (GVW): 49,000 kg Functional Loading platform height: 85 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good FAYMONVILLE F-S42-1BBA 2-AXLE LOWBED SEMI-TRAILER 2 X AXLES WITH AIR SUSPENSION 2ND AXLE IS STEERED TECHNICALLY PERMISSIBLE MAX. AXLE LOAD 12,000KG EACH TECHNICALLY PERMISSIBLE GROSS VEHICLE WEIGHT 49,000KG WABCO EBS-E SYSTEM TYRE SIZE 245/70 R17.5 EXTENDABLE LOADING PLATFORM LOADING PLATFORM LENGTH 755CM + 500CM, EXTENDABLE TO 1255CM LOADING PLATFORM WIDTH 254CM LOADING PLATFORM HEIGHT +/- 85CM COUPLING HEIGHT +/- 120CM LASHING EYES AND ROUND POTS FRONT AND REAR MARKING PLATES

Condition: used, axle configuration: 3 axles, total length: 14,000 mm, total height: 3,500 mm, suspension: air, tire size: 235/75R17.5, tire condition: 25 %, Tyre size: 235/75R17.5 Tyre profile: 25% Brakes: drum brakes Suspension: air suspension = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. Bwjdpfx Ahjxrhk So Tei See our company video: