Used Faymonville Stz Semitrailers for sale (184)

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, tire size: 235/75R17,5, color: blue, Year of construction: 2005, = Additional options and accessories = - Air suspension - Central lubrication system = Notes = The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By responding in any manner, you accept the applicability of Heinhuis’s General Terms and Conditions and confirm that you have taken note of these terms. Our prices are net export prices. Gijdpfxjy I Tu Dj Ahbow = Further information = General information Year of manufacture: 2005 Axle configuration Tyre size: 235/75R17.5 Axle manufacturer: BPW Rear axle 1: Twin tyres; Max. axle load: 10,500 kg; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,500 kg; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,500 kg; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 4: Twin tyres; Max. axle load: 10,500 kg; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Weights Unladen weight: 15,000 kg Payload: 45,000 kg Gross vehicle weight: 60,000 kg Condition Technical condition: good Visual condition: good = Company information = For more information: WhatsApp:

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,500 kg, permissible axle load (axle 2): 12,500 kg, permissible axle load (axle 3): 12,500 kg, first registration: 11/2013, total length: 12,000 mm, total width: 2,540 mm, total height: 900 mm, suspension: air, tire size: 235/75-R17,5, wheelbase: 7,920 mm, Year of construction: 2013, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Air suspension - Drum brakes = Notes = Well-maintained, extendable Faymonville semi low-bed trailer (year of manufacture 2013, extension length 3,600 mm); loading area length 8,700 mm + 3,600 mm = 12,300 mm; excavator arm recess (2,500 x 750 mm); ABS/EBS; BPW Eco-Plus axles with drum brakes; 4 hydraulically steered axles (remote controlled); loading ramps (total length: 4.50 m / width: 0.85 m); manually operated supports; ladder pockets; lashing eyes; widening beams + wooden widening extensions (max. 3 m width); twin tires (235/75-R17.5); air suspension; (tire tread depths: L: 8/11, 9/11, 13/11, 14/12 mm; R: 15/15, 14/12, 11/11, 9/8 mm); unladen weight: 13,940 kg; permissible gross weight: 68,000 kg (technical capacity: 75,000 kg; 25,000 kg saddle load); Belgian registration with valid technical inspection until 09.11.2026. Gsdpfx Ahszk Iifobsiw = Additional Information = Axle configuration Tire size: 235/75-R17.5 Axle brand: BPW ECO-PLUS Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 12,500 kg; Steered; Tire tread depth left inner: 69%; Tire tread depth left outer: 50%; Tire tread depth right inner: 94%; Tire tread depth right outer: 94% Rear axle 2: Twin tires; Max. axle load: 12,500 kg; Steered; Tire tread depth left inner: 69%; Tire tread depth left outer: 56%; Tire tread depth right inner: 75%; Tire tread depth right outer: 88% Rear axle 3: Twin tires; Max. axle load: 12,500 kg; Steered; Tire tread depth left inner: 69%; Tire tread depth left outer: 80%; Tire tread depth right inner: 69%; Tire tread depth right outer: 69% Rear axle 4: Twin tires; Max. axle load: 12,500 kg; Steered; Tire tread depth left inner: 75%; Tire tread depth left outer: 88%; Tire tread depth right inner: 50%; Tire tread depth right outer: 56% Weights Unladen weight: 13,940 kg Payload: 54,000 kg GVW: 68,000 kg Functional Body brand: Faymonville STZ-4AU Loading area height: 90 cm Maintenance, History, and Condition Technical Inspection: New TÜV (German technical inspection) upon delivery Technical condition: good Optical condition: good Identification License plate: QARP440 Additional Information Please contact Arne Honingh for further information.

Condition: used, axle configuration: > 3 axles, Year of construction: 2009, Empty weight: 16.800 kg Gsdpfxozhu A He Ahbeiw Carrying capacity: 54.200 kg GVW: 71.000 kg

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,500 kg, permissible axle load (axle 2): 12,500 kg, permissible axle load (axle 3): 12,500 kg, first registration: 07/2000, total length: 15,410 mm, total width: 2,540 mm, total height: 890 mm, suspension: air, tire size: 245/70 R17.5, tire condition: 50 %, wheelbase: 12,460 mm, color: other, Year of construction: 2000, Equipment: ABS, tail-lift, = Additional options and accessories = - 4-AXLES - Air suspension - Hydraulics - Steering Axle - Tailgate = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 12500 kg; Tyre profile: 50% Rear axle 2: Double wheels; Max. axle load: 12500 kg; Steering; Tyre profile: 60% Rear axle 3: Double wheels; Max. axle load: 12500 kg; Steering; Tyre profile: 70% Rear axle 4: Double wheels; Max. axle load: 12500 kg; Steering; Tyre profile: 30% Weights Empty weight: 12.800 kg Carrying capacity: 68.450 kg GVW: 81.250 kg Condition General condition: average Technical condition: average Visual appearance: good Identification Registration number: ZZ-98-52 Gsdpfxezf U Tgo Ahbsiw

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,500 kg, permissible axle load (axle 2): 12,500 kg, permissible axle load (axle 3): 12,500 kg, first registration: 11/2002, loading space length: 18,600 mm, loading space width: 2,530 mm, loading space height: 870 mm, total length: 126,000 mm, total width: 2,530 mm, total height: 870 mm, suspension: air, tire size: 235/70 R17.5, tire condition: 65 %, color: other, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - 3 axles - Air suspension - Central lubrication - Drum brakes - Hydraulics - Steering Axle = More information = Axle configuration Tyre size: 235/70 R17.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 12500 kg; Steering; Tyre profile: 65% Rear axle 2: Double wheels; Max. axle load: 12500 kg; Steering Rear axle 3: Double wheels; Max. axle load: 12500 kg; Steering; Tyre profile: 65% Weights Empty weight: 10.920 kg Gsdpfx Aozf U Svehbeiw Carrying capacity: 49.080 kg GVW: 60.000 kg Functional Height of cargo floor: 87 cm Condition Technical condition: good Visual appearance: good Identification Registration number: QAMD512

Condition: used, overall weight: 40,000 kg, first registration: 01/2012, total width: 2,550 mm, total height: 4,000 mm, Manufacturer: Faymonville Model: Euromax STZ-3AUB Gisdpsy H T Dijfx Ahbow Year of manufacture: 2012 Product type: Used Data: First registration: 2012 Overall dimensions LxWxH: 13.50 x 2.55 x 4.00 m Gross vehicle weight: 40,000 kg Unladen weight: 10,000 kg Location: Essen Available immediately

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Giedpfx Ahoy I Twxjbjw Weight: 12,300 kg. Load Capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering 3 steering axles. Slitted floor. Wink. Allu boards on neck. Hydraulic from trailer works on NATO. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3000mm. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: Lenght: 2800 + 1700 mm. Dimensions: Neck: L: 3750mm. W: 2500mm. H: 1380mm. King pin height: 1150 mm. Floor: L: 9600mm. W: 2550mm. H: 900mm. Tires: 245/70R17.5 80%. ID NO: 676. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2013 Curb weight: 12,300 kg Payload: 29,700 kg GVWR: 42,000 kg = Company information = For more information: WhatsApp:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Gsdpfxey Ay Umj Ahbjiw Powersteering 3 steering axles. Airsuspension. Hydraulic bridge from floor to neck. - length: 3000 mm. Slitted floor. Winch. Hydraulic from trailer works on NATO electricity. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: - length: 2850 + 1750 mm. - Hydraulic from left to right. Dimensions: Neck: L: 3750 mm. W: 2500 mm. H: 1400 mm. Kingpin height: 1200 mm. Floor: L: 9550 mm. W: 2550 mm. H: 900 mm. Tyres: 245/70R17.5 80%. ID NR: 439. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of construction: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg Gross weight: 42,000 kg = Company Information = For more information: WhatsApp:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load Capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering 3 steering axles. Slitted floor. Wink. Allu boards on neck. Hydraulic from trailer works on NATO. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3000mm. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: Lenght: 2800 + 1700 mm. Dimensions: Neck: L: 3750mm. W: 2500mm. H: 1380mm. King pin height: 1150 mm. Floor: L: 9600mm. W: 2550mm. H: 900mm. Tires: 245/70R17.5 80%. ID NO: 436. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2013 Curb weight: 12,300 kg Payload: 29,700 kg GVW: 42,000 kg Gisdpfx Asy Ayz Hohbew = Company information = For more information: WhatsApp:

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2006, loading space length: 9,530 mm, loading space width: 1,565 mm, loading space height: 1,650 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, Concrete inner loader, loading length: 9530 mm, loading width: 1,565 mm, angle profiles in the loading area for pallet accommodation, hydraulic load securing, 6 heavy-duty lashing rings per side, NATO jump-start socket, ABS, EBS, BPW Eco axle(s), drum brake system, front drop supports, vehicle may have advertising stickers and/or lettering. SI86628 Our offer generally does not include new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide you with an offer from our partner workshops! Vehicle may be provided with advertising stickers and/or lettering. Our general terms of delivery and payment apply. Gijdpfx Ahsymu Iujbsw We are happy to create a financing or leasing package for this item. Please contact us!

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, suspension: air, tire size: 385/65R22,5, color: red, Year of construction: 2016, = Additional Options and Accessories = - Air suspension = Notes = Faymonville F-S43-1BGS. Year: 2016. 9-ton SAF axles. Weight: 9430 kg. Load capacity: 35,570 kg. Max. weight: 18,000 kg. Kingpin load: 18,000 kg. 7.5-meter extendable. Power steering on 3 steering axles. Hydraulics operate on NATO standard. EBS ABS ALB. Radio remote control. Air suspension. Floor dimensions: L: 13,600 mm. W: 2550 mm. Gijdpfx Ahezb U A Ijbow H: 1450 mm. Kingpin height: approx. 1300 mm. Tires: 385/65R22.5, 80%. ID No.: 574. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of manufacture: 2016 Axle Configuration Tire size: 385/65R22.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 2: Max. axle load: 9000 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 3: Max. axle load: 9000 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Weights Unladen weight: 9,430 kg Payload: 35,570 kg GVWR: 45,000 kg Condition Technical condition: good Optical condition: good = Company Information = For more information: WhatsApp:

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, suspension: hydraulics, tire size: 245/70R17,5, color: red, Year of construction: 2022, Faymonville F-S42-2GXX. Year: 2022. 12 tons Pendel-X axles. Weight: 16,400 kg. Load capacity: 32,600 kg. Max. weight: 49,000 kg. Kingpin load: 25,000 kg. 2 x extendable: - 1: 4700 mm. - 2: 4300 mm. Total 9-meter extension. Radio remote control. 4-meter extensions. Hydraulic suspension. Godpozk E Nvofx Ahbjiw Hydraulic detachable gooseneck. Hydraulic system compatible with NATO. EBS ABS ALB. Aluminum boards on the neck. Zinc-coated. 2 x 25 cm widened. Dimensions: Neck: L: 4100 mm. W: 2480 mm. H: 1500 mm. Kingpin height: 1200 mm. Floor: L: 6850 mm. W: 2550 mm. H: 4250 mm. Floor thickness: 270 mm. Rear trailer: L: 2600 mm. W: 2550 mm. H: 1050 mm. Tires: 245/70R17.5, 90%. German trailer! ID No: 530. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of manufacture: 2022 Axle Configuration Tire size: 245/70R17.5 Axle brand: Pendel-X Suspension: hydraulic suspension Rear axle 1: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth, left inner: 90%; Tire tread depth, left outer: 90%; Tire tread depth, right inner: 90%; Tire tread depth, right outer: 90% Rear axle 2: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth, left inner: 90%; Tire tread depth, left outer: 90%; Tire tread depth, right inner: 90%; Tire tread depth, right outer: 90% Weights Unladen weight: 16,400 kg Payload: 32,600 kg GVW: 49,000 kg Condition Technical condition: good Optical condition: good = Company Information = For more information: WhatsApp:

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, suspension: hydraulics, tire size: 245/70R17,5, color: grey, Year of construction: 2016, Faymonville F-S42-2ACB. Year: 2016. 12-ton SAF Pendel-X axles. Weight: 12,700 kg. Load capacity: 36,300 kg. Max. weight: 49,000 kg. Kingpin load: 25,000 kg. 4.2-meter extendable. 3-meter extensions. 2 x 25 cm widened, including widening mechanism. Hydraulic suspension. Hydraulically detachable gooseneck. Hydraulics operate on NATO standard. Radio remote control. EBS ABS ALB. Aluminum boarding on the neck. 3 detachable floor sections. Zinc coated. Dimensions: Neck: L: 3700 mm. W: 2480 mm. H: 1600 mm. Kingpin height: 1200 mm. Floor: L: 6350 mm. W: 2550 mm. H: 350 mm. Floor thickness: 220 mm. Rear trailer section: L: 2600 mm. W: 2550 mm. H: 1000 mm. Tires: 245/70R17.5, 70%. German trailer! ID No.: 565. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of manufacture: 2016 Axle Configuration Tire size: 245/70R17.5 Axle brand: SAF Pendel-X Suspension: hydraulic suspension Rear axle 1: Twin-tire; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Twin-tire; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 12,700 kg Payload: 36,300 kg GVW: 49,000 kg Condition Technical condition: good Optical condition: good = Company Information = For more information: Gjdpfxszk E Nie Ahbsiw WhatsApp:

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. Excerpt from the equipment. Complete equipment available upon request. Gooseneck: Gooseneck with angled front corners at approximately 45° and a rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Extendable loading platform: Extendable loading platform with a rear slope of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with non-slip sheet metal flooring over the axles. Axles: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steering. Technical axle load: 12,000 kg each. Air suspension with raising and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. TPMS: TPMS tire pressure monitoring system according to ECE R 141. Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Braking system according to EU regulations with EBS-E (4S3M). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. Final coating with 2 coats of 2K topcoat, solid color in RAL 3002 carmine red according to the RAL 841GL system. Rims in silver-gray. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Paint coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Steel construction: Steel construction made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa). S690QL/S700MC (yield strength 690 MPa). Electrical system: Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the turn signal. ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185. 24S ISO-3731. 15-pin ISO-12098. Godpfx Aszk S Dmohboiw Incl. the following additional equipment: - 2 inch kingpin - One galvanized steel front bulkhead, approximately 400 mm high. - Electro-hydraulic unit (± 45kg) - Rear steering from front and rear via cable remote control operated by push buttons, with single-axle control of the axles (without installation in the central beam). - 1 pair of recessed lashing rings along the central beam at the rear in the slope (LC 10,000 daN) (± 3kg) - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in stakes are removable. (Length of the superstructure approximately 2,560 mm) (± 46kg) - One tool box galvanized, integrated in the angled gooseneck (± 47kg) - 3 pairs of WADER container pockets in the loading platform for a 20' (30?) or a 40' container (± 30kg) - 6 pairs of stake pockets for plug-in stakes approximately 100 x 50 mm in the

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt of equipment: - Extendable loading platform with a rear slope of approximately 1,000 mm x 8°. - Hardwood flooring, approximately 48 mm thick, with a non-slip steel plate covering over the axles. - JOST kingpin (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). - BPW axles and suspension, 2 fixed axles, 1 self-steering axle, technical axle load: 12,000 kg each. - Air suspension with lifting and lowering valve. - Braking system in accordance with EU regulations with EBS-E (2S2M). - 2-inch kingpin. - One galvanized steel front wall, approximately 400 mm high. - Load measuring device for determining axle loads, including a load diagram. - Aluminum side panels and rear wall on the gooseneck, plug-in type, approximately 2,440 x 400 mm (L x H). Godpfx Ahozkx Ilebsiw - One galvanized toolbox, integrated into the sloped gooseneck (± 47 kg). - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg). - 6 pairs of spar pockets for plug-in spars, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg). - Extensions, galvanized, extendable by approximately 230 mm on each side (± 230 kg). - Lift axle on the front axle. - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle. - 2 LED reversing lights mounted on the rear panel. - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg). - Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg). - A mounting bracket for a rotating beacon on the warning panels. - One rotating beacon supplied separately. - HRM metallization (High Resistance Metallization). - Top coat in a single color, RAL 3002 carmine red.

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Giodpfx Ahszkx Hbsbew Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck Gijdpfjzkx Huox Ahbsw - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Condition: used, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2013, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2013, Manufacturer: Faymonville Type: STN-4UBX Year of manufacture: 2013 Product type: Used Data: First registration: 19.03.2013 Number of axles: 4 Overall dimensions L x W x H: 13.53 x 2.55 x 4.00 m Unladen weight: 11,800 kg Permissible total weight: 40,000 kg Special features: Semi-trailer, standard low-loader, steered trailing axle, Vehicle may only be operated behind a towing vehicle with a plug connection according to ISO 7638 (5 or 7-pin). Gisdpfx Aozkpctshbsw Location: 45143 Essen Note: Available immediately

Condition: used, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2013, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2013, Manufacturer: Faymonville Type: STN-3UB Year of manufacture: 2013 Product type: Used Giedpfxszkpcys Ahbow Data: Initial registration: 13.02.2013 Number of axles: 3 Overall dimensions L x W x H: 13.50 x 2.55 x 4.00 m Unladen weight: 10,900 kg Permissible total weight: 42,000 kg Special features: Semi-trailer, standard low-loader, axle with trailing swivel The vehicle may only be operated behind a towing vehicle with a plug connection according to ISO 7638 (5- or 7-pole). Location: 45143 Essen Note: immediately available

Condition: used, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 02/2027, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2018, Equipment: ABS, FAYMOVILLE/MAX TRAILER SEMI Extendable to 17250 Sliding table Hydraulic system operated via electrics SAF axles, 3 x 10,500 kg Air suspension 1 axle liftable Last axle steered Widened to 3,000 mm Drive-over capability at the front with aluminum ramps Storage boxes Tires with 50-60% tread Container locking system Aluminum sideboards at the front German registration 8 chain tensioners with TÜV approval Widening warning signs Ramps hydraulically adjustable Ramps split, 2600-1400 mm Giedpfx Ahezknrtsbjw Ramps hydraulically operated 1 owner Original color Never used with tracked vehicles etc.

Condition: used, functionality: fully functional, empty load weight: 12,900 kg, overall weight: 49,000 kg, axle configuration: 2 axles, first registration: 03/2022, Year of construction: 2022, Faymonville 2-axle lowbed trailer MEGAMAX 2x12 t PA 2 steered axles Single extension, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Loading deck width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical telescopic extension: approx. 4,700 mm Fifth wheel height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Loading area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin offset: approx. 1,200 mm Swivel radius tractor unit (rear): approx. 2,300 mm Swivel radius (front): approx. 1,800 mm Axle spacing: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized deck length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 25,000 kg Dropdeck: - Designed as a telescopic dropdeck in "SUPER LOW" version - Length approx. 6,850 mm, with mechanical locking Chassis (rear): - Rear chassis with closed outer frame, chequer plate and continuous prismatic excavator trough, approx. 1,250/700 x 505 mm, open at the rear Gsdpfxoy Hxd Ie Ahbjiw - Pendle-axles, all axles hydro-mechanically forced steered - Hose burst valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off and safety pins for securing in raised position - Technical axle load: 12,000 kg per axle - Hydraulic axle compensation Brake system: - WABCO brake system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallization) - Entire steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc, 15% aluminium) Paintwork: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2K (acrylic) paint, single color, followed by cavity sealing with special wax - Trailer color: RAL 3002 Carmine Red - Rim color: Silver grey - Drop side color: Natural aluminum Steel construction: - High-strength fine-grained steel construction. - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Condition: used, axle configuration: 3 axles, first registration: 04/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70R17.5, color: grey, Year of construction: 2019, Faymonville F-S43-1AAF Gisdpfxezinblj Ahbow 660 cm Extendable Hydraulic ramps Winch Forced steering = Further information = Tire size: 245/70R17.5 Suspension: Air suspension Front axle: Twin tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Middle axle: Twin tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle: Twin tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Unladen weight: 13,500 kg Payload: 47,500 kg GVW: 61,000 kg Model number: F-S43-1AAF / EXTENDABLE / HYDRAU = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We do our best to provide accurate information, but no rights can be derived from the information provided.

Condition: used, machine/vehicle number: YAFTL208100007948, axle configuration: 2 axles, loading space length: 10,600 mm, loading space width: 2,550 mm, loading space height: 1,010 mm, Year of construction: 2008, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Drum brake system = Additional Information = Weights Unladen weight: 11,660 kg Payload: 26,340 kg GVW: 38,000 kg Condition Overall condition: average Technical condition: average Optical condition: average Additional Information Condition of front tires: 70% Front tires: 245/70 R17.5 Rear tires: 245/70 R17.5 Last inspection: 2026-06-29 Additional Information Gjdpfx Aheziivwsbeiw Please contact Lastas Sales for further information.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall Giodozhxgijpfx Ahbew • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...