Used Faymonville Semitrailers for sale (185)

Condition: used, machine/vehicle number: YAMT14XX5K0104637, axle configuration: > 3 axles, first registration: 01/2020, total length: 14,100 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2020, Chassis Chassis height: 90 cm Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length above axes: 90 cm Length of loading floor: 930 cm Length of ramps: 405 cm Length of swan neck: 430 cm Max width: 305 cm (20 cm + 20 cm) Max. length: 930 cm Expandable: ✓ Tank Fuel: ✓ 3-axle semi lowbed trailer with hydraulic ramps, ABS, Air suspension, 1st axle lifting axle, 3rd and 4th axles passive steering axles, Drum brakes, Saf axles, Tyres 235/75R17.5, Double tyres, Kingpin diameter 2 inch // DIMENSIONS // 60800 kg max weight, Load bed lenght 930 cm, Load bed width 255 cm, Max load bed width 305 cm, Load bed height 90 cm, Gooseneck lenght 430 cm, Gooseneck height 160 cm, Kingping height 120 cm, Ramp lenght 405 cm, Shipment dimensions: 1410x255x335 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Lift axle; Tyre profile left outer: 15%; Tyre profile right outer: 80% Axle 2: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 50% Axle 3: Double wheels; Steering; Tyre profile left outer: 70%; Tyre profile right outer: 70% Axle 4: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 65% Fpodpeu H D Taofx Ah Tol Weights Empty weight: 11.480 kg Carrying capacity: 49.320 kg GVW: 60.800 kg Functional Make of bodywork: Faymonville Height of cargo floor: 90 cm Identification Registration number: C525073 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, maximum load weight: 33,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 01/2027, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, Extendable semi-trailer, overall length adjustable from 7700 mm to 21300 mm, 9 stake pockets per side, 9 lashing points per side, all-round warning light / rear and center, extendable warning signs, JOST support jacks, central lubrication system, continuous underfloor box, ABS, EBS, SAF axle(s), last axle steered, drum brake system, air suspension with lifting and lowering mechanism, vehicle can be covered with advertising and/or lettering. SI86996 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Fpjdezw Sguspfx Ah Tsl Please contact us!

Condition: used, maximum load weight: 33,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 01/2027, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, Extendable semi-trailer, overall length adjustable from 7700 mm to 21300 mm, 9 stake pockets per side, 9 lashing points per side, all-round warning light / rear and center, extendable warning signs, JOST support jacks, central lubrication system, continuous underfloor box, ABS, EBS, SAF axle(s), last axle steered, drum brake system, air suspension with lifting and lowering mechanism, vehicle can be covered with advertising and/or lettering. Fpsdpfx Ajzw Sgbsh Tel SI86996 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - Central lubrication system = Notes = Faymonville Jeep dolly D3 Year 2006. 1 x lift axle. 1 x friction steering axle / trailing arm steering. Air suspension. Max. technical weight: 56,000 kg. Faymonville STBZ-5VA Year 2006. Swivel axle. Removable gooseneck. Movable table. Extendable bed: 400 cm. Fsdpfx Ahexbng Es Tepl Loading bed: 650 + 400 cm. 50,000 kg gooseneck capacity. Max. technical weight: 119,680 kg. = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; tire tread depth left inside: 15%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: air suspension Front axle 2: Twin tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 40%; tire tread depth right outside: 60%; suspension: air suspension Front axle 3: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 70%; tire tread depth right inside: 60%; tire tread depth right outside: 70%; suspension: air suspension Rear axle 1: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 70%; suspension: hydraulic suspension Rear axle 2: Twin tires; steerable; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 30%; tire tread depth right outside: 75%; suspension: hydraulic suspension Rear axle 3: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: hydraulic suspension Rear axle 4: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 50%; suspension: hydraulic suspension Rear axle 5: Twin tires; steerable; tire tread depth left inside: 70%; tire tread depth left outside: 70%; tire tread depth right inside: 20%; tire tread depth right outside: 70%; suspension: hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 99,400 kg GVW: 136,000 kg Financial information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, total length: 19,000 mm, total width: 600 mm, total height: 450 mm, Year of construction: 2022, Color: Red Load capacity: 430,000 kg Expandable Fedsuu Hixopfx Ah Tjpl Manufacturer: Faymonville Type: G-Module Vessel Deck Year: 2022 Connectable to Goldhofer THP SL Coupling Heads G-Module-SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically widenable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression joint at the front and rear Color: RAL 3002 Elongation Beams 1 pair of elongation beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint at the front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 set of connecting lines for coupling pin G-Module = Further Information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Optical condition: very good Price: On request

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, first registration: 07/2014, total length: 13,650 mm, total width: 2,550 mm, total height: 2,870 mm, suspension: air, tire size: 235/75R17,5, color: red, Year of construction: 2014, = Additional options and accessories = Fedpfozz Sc Rjx Ah Tspl - Air suspension = Notes = Faymonville F-S43-1BGA. Year of manufacture: 2014. 10.5-ton SAF axles. Tare weight: 10,500 kg. Max. total weight: 42,000 – 49,500 kg. Fifth-wheel load: 18,000 kg. EBS, ABS, ALB. 1st axle: Lift axle. 3rd axle: Steerable trailing axle. Air suspension. Toolboxes. 2 separately operated hydraulic lift platforms. Dimensions of loading platform: L: 13,450 mm. W: 2,550 mm. H: 1,150 mm. Fifth-wheel height: 1,000 mm. Mega low-loader! Tires: 235/75R17.5 (70% tread). Dimensions: L: 13,650 mm. W: 2,550 mm. H: 2,870 mm. German semi-trailer! 2 units available! ID No.: 391. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Axle configuration Tire size: 235/75R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10500 kg; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 70%; Tire tread right outside: 70% Rear axle 2: Twin tires; Max. axle load: 10500 kg; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 70%; Tire tread right outside: 70% Rear axle 3: Twin tires; Max. axle load: 10500 kg; Steerable; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 70%; Tire tread right outside: 70% Weights Tare weight: 10,500 kg Payload: 31,500 kg GVW: 42,000 kg Functional Height of loading platform: 1150 cm Condition Technical condition: good Optical condition: good = Company information = For more information:

Condition: used, maximum load weight: 36,990 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 08/2022, next inspection (TÜV): 09/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Loading area: * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of lashing rings (LC 5,000 daN) that fold outward * 2 pairs of lashing rings (LC 10,000 daN) that fold outward * Recesses in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) Axles: * BPW axles with disc brakes (approx. 377 mm) * Air suspension with lifting/lowering function (ET 120) Tires: * 435/50 R 19.5 - Manufacturer of our choice Kingpin: * JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load) Braking system: * Complies with EU regulations, with EBS-E (2S2M) Electrical system: * Complies with EU regulations Lighting: * 24-volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pole connectors * Complies with ISO. 24N ISO-1185 24S ISO-3731 * 15-pole ISO-12098 Steel construction: * Made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paint finish: * First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Rims in silver. Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 2-inch kingpin * A galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high (± 35 kg) * Yellow reflector tape according to EU regulations, laterally and at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading area with approx. 38 mm thick hardwood flooring (+ 320 kg) * 10 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the loading area (± 30 kg) * 1 spare wheel holder under the loading area on the right side in the direction of travel. * A mudflap at the rear of the trailer. Fpsdpfxozqiigo Ah Tel * Manual and description on a USB stick. * A bracket for a rotating beacon at the rear of the trailer. * On the drawbar and the rear panel, left and right, a bracket for the warning panels including a connector. * On the central beam, a painted layer of sand as an anti-slip protection. * An INOX toolbox transversely under the loading area, approx. 1,000 x 400 x 2,500 mm (± 135 kg) * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container. (± 90 kg) * 4 pairs of WADER container locking devices (± 60 kg) * 10 pairs of galvanized removable stakes, approx. 100 x 50 mm, approx. 1,000 mm high. (± 220 kg) * 3 pairs of stake pocket rails, mounted transversely in the loading area, for removable stakes approx. 100 x 50 mm (± 95 kg) * Storage for a maximum of 9 pairs of removable stakes, approx. 100 x 50 mm, attached to the front bulkhead on the inside. (± 34 kg) * A tool box made of HDPE, approx. 620 x 360 x 610 mm, under the loading area on the left side in the direction of travel. (± 36 kg) * Plug-in approx. 500mm U-shaped mounting rails for aluminum ramp extensions at the rear of the vehicle * Lift axle on the front axle with control

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Load capacity: 100,250 kg Weights: King-pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Brand Axles: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information Fedpfjuu E Tisx Ah Tepl NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information Year of construction: 2024 Axle configuration Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Weights Empty weight: 33,750 kg Load capacity: 100,250 kg GVW: 134,000 kg Functional Loading platform height: 105 cm Extendable platform: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 08/2017, loading space length: 13,100 mm, loading space width: 2,550 mm, loading space height: 1,300 mm, total length: 132,500 mm, total width: 2,550 mm, total height: 2,800 mm, suspension: air, tire size: 235/75R17,5, color: green, Year of construction: 2017, = Additional Options and Accessories = - Air suspension = Notes = Faymonville F-S43-1AAF. Fsdpfszzzkdex Ah Tjpl Year of manufacture: 2017. 10-ton SAF axles. Tare weight: 13,740 kg. Payload: 41,260 kg. Gross vehicle weight: 55,000 kg. Fifth wheel load: 25,000 kg. 3-section extendable: 1: 6.70 meters. 2: 7.10 meters. 3: 6.90 meters. Total extension length: 20.7 meters. Forced steering (3 steering axles). Hydraulic connection: NATO standard. EBS, ABS, ALB. Air suspension. Storage boxes. Twist locks. Dimensions of loading platform: L: 13,100 mm. W: 2,550 mm. H: 1,300 mm. Fifth wheel height: 1,100 mm. Tires: 235/75R17.5 (tread depth 80%). Dimensions of semi-trailer: L: 13,250 mm. W: 2,550 mm. H: 2,800 mm. German semi-trailer! ID No.: 621. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By using any form of contact, you accept the validity of the General Terms and Conditions of Heinhuis and confirm that you have taken note of these conditions. Our prices are net export prices. = Additional Information = Axle configuration Tire size: 235/75R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Double tires; Max. axle load: 10,000 kg; Steered; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 2: Double tires; Max. axle load: 10,000 kg; Steered; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 3: Double tires; Max. axle load: 10,000 kg; Steered; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Weights Tare weight: 13,740 kg Payload: 41,260 kg GVW: 55,000 kg Condition Technical condition: good Optical condition: good Financial information Price: On request = Company Information = For more information:

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2007, total length: 15,430 mm, total width: 2,550 mm, total height: 3,050 mm, suspension: air, tire size: 235/75R17,5, color: red, Year of construction: 2007, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Faymonville SPZ-4AAAX. Year of manufacture: 2007. 10-ton BPW axles. Unladen weight: 14,500 – 16,000 kg. Max. gross vehicle weight: 65,000 kg. Kingpin load: 25,000 kg. Hydraulic connection according to NATO standard. Forced steering (4 steering axles). 1st axle designed as a lift axle. Air suspension. Galvanized. Storage boxes. EBS, ABS, ALB. 3-stage extendable. Total extension: 25.1 meters. Total length: 40.3 meters. Dimensions of loading platform: Gooseneck: L: 4300 mm. W: 2550 mm. H: 1500 mm. Kingpin height: 1200 mm. Fjdpfx Ahozzyvxs Tjpl Loading platform: L: 10,730 mm. W: 2550 mm. H: 1200 mm. Tires: 235/75R17.5 (tread depth 70 %). Dimensions: L: 15,430 mm. W: 2550 mm. H: 3050 mm. German semi-trailer! 3 UNITS AVAILABLE!! ID No.: 638. The General Terms and Conditions of Heinhuis shall apply to all advertisements, offers and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the applicability of Heinhuis's General Terms and Conditions and confirm that you have taken note of these conditions. Our prices are net export prices. = Further Information = Axle configuration Tire size: 235/75R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Twin tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 3: Twin tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 4: Twin tires; Max. axle load: 10000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 14,500 kg Payload: 50,500 kg GVW: 65,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request = Company Information = For more information:

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 7,600 kg, permissible axle load (axle 2): 7,600 kg, permissible axle load (axle 3): 7,600 kg, first registration: 03/2013, suspension: air, tire size: 205/65R17,5, color: red, Year of construction: 2013, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Faymonville STN-4UBX. Year of manufacture: 2013. 7.6-ton SAF axles. Max. gross vehicle weight: 40,000 kg. Kingpin load: 18,000 kg. Hydraulic system according to NATO standard. EBS, ABS, ALB. Aluminum side panels on the gooseneck. Winch with remote control. Hydraulic bridge (connection between loading platform and gooseneck): - Length: 3000 mm. Floor with longitudinal slots. Central lubrication system. Axle mileage: 329,395 km. Air suspension. 3rd and 4th axles designed as trailing steering axles. Hydraulic ramps (2-part): - Length: 3000 + 1750 mm. - Hydraulically adjustable laterally. Dimensions: Gooseneck: L: 3750 mm. W: 2480 mm. H: 1400 mm. Fpedpfezzxnasx Ah Tol Kingpin height: 1150 mm. Loading platform: L: 9630 mm. W: 2550 mm. H: 800 mm. Tires: 205/65R17.5 (tread depth 80%). German trailer! ID No.: 518. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By contacting us in any way, you accept the validity of Heinhuis's General Terms and Conditions and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = Axle configuration Tire size: 205/65R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 7600 kg; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 2: Twin tires; Max. axle load: 7600 kg; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 3: Twin tires; Max. axle load: 7600 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 4: Twin tires; Max. axle load: 7600 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Weights GVWR: 40,000 kg Functional Loading platform height: 80 cm Condition Technical condition: good Optical condition: good Damage: none = Company Information = For more information:

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 11/2023, suspension: air, tire size: 245/70R17,5, color: red, Year of construction: 2023, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Faymonville F-S45-1AAF. Year of manufacture: 2023. 12-ton BPW axles. Unladen weight: 17,200 kg. Payload: 70,800 kg. Gross vehicle weight: 88,000 kg. Fifth wheel load: 28,000 kg. Hydraulic operation via NATO power socket. EBS, ABS, ALB. Spare wheel. Aluminum side walls on the gooseneck. 1st axle as a lift axle. 2nd, 3rd, 4th and 5th axles as steering axles (forced steering). Double extendable: - 1st extension: 6.95 meters. - 2nd extension: 6.62 meters. Total extension: 13.57 meters! Air suspension. 2 x 25 cm extendable (extension kit included). Hydraulic ramps (2-part): - Length: 2800 + 1400 mm. - Hydraulically side-shiftable. Dimensions: Gooseneck: L: 3300 mm. W: 2480 mm. H: 1700 mm. Fifth wheel height: 1400 mm. Loading area: L: 9000 mm. W: 2550 mm. H: 900 mm. Tires: 245/70R17.5 (tread depth 70 %). Fsdpfjzzw Tuex Ah Tspl ID No.: 451. Heinhuis's general terms and conditions apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the applicability of Heinhuis's general terms and conditions and declare that you have taken note of these general terms and conditions. Our prices are net export prices. = Further Information = Axle configuration Tire size: 245/70R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Double-tired; Lift axle; Max. axle load: 12,000 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Double-tired; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 3: Double-tired; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 4: Double-tired; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 5: Double-tired; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 17,200 kg Payload: 70,800 kg GVW: 88,000 kg Functional Loading area height: 90 cm Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = For more information:

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK Fpedpfxozz Ei Rs Ah Tsl * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2010, loading space length: 136,600 mm, loading space width: 2,500 mm, total length: 206,600 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, tire condition: 40 %, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - 3 axles - Air suspension - Disc brakes - Lift Axle - Steering Axle = More information = Axle configuration Tyre size: 385/65 R22.5 Tyre profile: 40% Suspension: air suspension Fpsdpfx Ahjzrzl Ne Tsl Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 10.000 kg Carrying capacity: 35.000 kg GVW: 45.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: QKW546

Condition: new, overall weight: 78,000 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 850 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: • Gooseneck in SNT design for optimizing load platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10° • Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Load Platform: • Extendable load platform, approx. 8,800 mm long with rear chamfer of approx. 500 mm x 10° • Recess in the load platform and chamfer area for receiving excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • Pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulic foldable ramp ends • Ramps can be hydraulically moved individually by approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the chamfered section of the load platform • Ramps with hardwood covering • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW axle stub, 1st axle steering, all other axles forced steered via hydromechanical system • 1st axle with electro-magnetic reverse lock, activated automatically in reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories included: • Detachable steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection strip • 3 kW electro-hydraulic power pack for operation of hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • On the gooseneck: 1 pair removable ALU side boards, approx. 400 mm high, anodized • On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering over the king pin • 3.5" king pin • Gooseneck guide plate for fifth wheel, approx. 500 mm wide • Load platform locking with conically welded locking profiles every 250 mm • Includes pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the load platform • Extendable (galvanized) outriggers, approx. 230 mm each side Fpedorvw U Sopfx Ah Tsl • 1 pair of built-in open wheel recesses to the extension, approx. 700 x 410 mm, in the load platform in front of the 1st axle • Wheel recesses with steel plating and 15 x 15 mm square climbing bars, approx. every 200 mm • 1 pair of built-in wheel recesses, approx. 1,480 x 700 x 410 mm, in the load platform between the 1st and 2nd axles • Wheel recesses with 15 x 15 mm square climbing bars and extensions in the lower area • ALU covers for the wheel recesses between the 1st and 2nd axles, usable as widening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the chamfered load platform • Central lubrication system with 1 pump, brand BEKAMAX, for standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single-track control • WABCO Smart Board System • Smart Board equipped with odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 marker lights and holders for beacon

Condition: used, maximum load weight: 44,050 kg, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt: Equipment Gooseneck * Designed in SNT style to optimize the loading area length * Length approx. 3,750 mm * Gooseneck can be raised, lowered, and extended hydraulically * Technical fifth-wheel load: 34,000 kg. For SZM: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low-bed * Designed as a telescoping kettle bridge with a low overall height * With extension at the front and mechanical locking * Length x Width approx. 7,550 mm x 2,740 mm Rear chassis * With closed outer frame * Diamond plate surface and continuous prism excavator recess approx. 1,450/900 x 505 mm, open at the rear Braking system * WABCO EBS-E, in accordance with EU regulations Axles and suspension Fpedpfx Ahozzudwj Tel * PENDEL-AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle balancing cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic axle equalization Tire equipment * 245/70 R 17.5 3PMSF * Load index 143/141L(146/146F) * Manufacturer of our choice Paint finish: * Trailer color: RAL 3002 Carmine Red Included accessories * Steel front wall, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electric-hydraulic unit for controlling the hydraulic operations * With the exception of hydraulic winches, outer support of the gooseneck with mounting holes for screw-in lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Diamond plate surface above the gooseneck. * 3.5-inch kingpin * Guide plate of the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Hydraulic cross member for supporting the gooseneck on the SZM or a dolly. * 1 pair of steel ramps with climbing strips and mounting bolts for bridging the pick-up hooks of the low-bed * Mounting possibility for the steel ramps at the rear between the outer supports of the gooseneck. * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 2 pairs of screw-in rings M24 (LC 8,000 daN) included. * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, foldable inward and outward (LC 10,000 daN). * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 1 pair of screw-in rings M24 (LC 8,000 daN) included. * Preparation for mounting screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locking mechanisms. * Mechanical bolt-tab coupling of the low-bed to the chassis for exchanging the loading area or installing extension supports. * With electro-pneumatic-hydraulic couplings * Suspension rail at the front on the rear chassis for the low-bed for loose support ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator recess of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator recess in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator recess of the rear chassis (LC 10,00

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, first registration: 06/2017, total length: 7,000 mm, total width: 2,500 mm, total height: 880 mm, suspension: air, tire size: 235/70 R17.5, tire condition: 75 %, color: other, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - 2 axles - Air suspension = More information = Axle configuration Tyre size: 235/70 R17.5 Tyre profile: 75% Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 10500 kg Rear axle 2: Double wheels; Max. axle load: 10500 kg Weights GVW: 21.000 kg Condition Technical condition: very good Visual appearance: very good Fsdpfezzi Uqjx Ah Tepl Identification Registration number: QALO590

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Rear axle 2: Steered Rear axle 3: Steered Gross vehicle weight: 48,000 kg Technical condition: Very good Visual condition: Very good Fpodjvvwzrspfx Ah Tjl Price: On request Please contact David F Middelman for further information.

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. A complete equipment list is available upon request. SWAN NECK Swan neck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 10°. For semi-trailer: 4 x 2, 6 x 2, and 6 x 4. - Steel front wall, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - 1 pair of plug-in aluminum side walls on the swan neck, approx. 400 mm high, in anodized finish. - 1 plug-in aluminum rear wall on the swan neck, approx. 400 mm high, in anodized finish. - 2-inch kingpin - Mounting area in the rear section of the swan neck for aluminum approach ramps. - Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) LOADING AREA Extendable loading area, length approx. 8,800 mm, with a bevel at the rear, approx. 500 mm x 10°. A recess in the loading area extends into the bevel to accommodate the excavator arm, approx. 3,850 x 750 x 210/290 mm (L x W x H). Pneumatic locking system with tapered locking pin and reinforced locking positions. The supply lines are protected in the extendable beams and automatically adjust to the respective loading area length. - TPMS tire pressure monitoring system according to ECE R 141. - BPW axles and suspension, 1st axle with steered trailing arm, all other axles with hydro-mechanical forced steering. - 1st axle with electro-magnetic reverse lock via reverse gear and can be manually activated. - Technical axle load: 12,000 kg each - Air suspension with lifting and lowering valve. - Tires 245/70 R 17.5 3PMSF, twin tires. Manufacturer of our choice. - Locking of the loading area with tapered welded-on locking profiles every approx. 250 mm. Fpedpfxstx Nwns Ah Tel - 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. - Extendable widening elements (galvanized) by approx. 230 mm per side (without wooden planks). - Wheel arches with square climbing strips, approx. 15 x 15 mm in front of the axles, continuously open up to the transverse support of the swan neck, approx. 700 x 410 mm (W x D). - Wheel arches with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D). - Control valves for the hydraulic ramps on the right side of the vehicle. - Steering from the front and rear can be operated via a cable remote control, with single-axle control, without installation in the semi-trailer. HYDRAULIC LOADING RAMPS DR-15/60-900-4350-KG-HV-M A pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm. The surface of the large ramp section is divided into two: sheet metal surface with square climbing strips approx. 15 x 30 mm every approx. 200 mm on the outside and rubber surface on the inside. Hydraulically folding ramp tips, ramps can be individually moved outwards by approx. 235 mm and inwards by approx. 215 mm hydraulically. Maximum load and approach angle according to the technical data sheet: C465501 - Rubber floor Super Grip approx. 25 mm and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area. BRAKING SYSTEM Braking system from WABCO EBS-E according to EU regulations. Without connection cable to the semi-trailer tractor. LIGHTING

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) Fpodpszzhfuefx Ah Tol * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation Fpsdezzhfnjpfx Ah Tol * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: good (used), axle configuration: 2 axles, first registration: 03/2004, total length: 15,600 mm, total width: 2,550 mm, color: green, Year of construction: 2004, Equipment: ABS, - Air suspension - Central lubrication system Rear axle 1: Steered Rear axle 2: Steered Unladen weight: 13,400 kg Payload: 22,600 kg GVWR: 36,000 kg Superstructure brand: FAYMONVILLE STBZ-2VA Loading platform height: 45 cm Technical condition: good Optical condition: good FAYMONVILLE STBZ-2VA – 2-AXLE LOW LOADER – TELESCOPIC – DETACHABLE GOOSENECK – HYDRAULICALLY STEERED Well-maintained and robustly built Faymonville STBZ-2VA 2-axle low loader, equipped with a detachable gooseneck, telescopic platform, hydraulically steered axles, air suspension, and a central lubrication system. A professional low loader for the transport of construction machinery, excavators, wheel loaders, cranes, as well as long and heavy machinery. GENERAL DATA * Manufacturer: Faymonville * Type: STBZ-2VA * Design: 2-axle low loader * First registration: 19.03.2004 * Number of axles: 2 * Axle manufacturer: BPW * Both axles hydraulically steered * Air-suspended * Central lubrication system * Detachable gooseneck * Excavator boom recess at the rear * Tires: 235/75 R17.5 LOW PLATFORM / LOADING AREA The Faymonville features a particularly low and widely telescopic platform. * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: approx. 1,390 cm * Width: approx. 255 cm * Loading height: only approx. 45 cm * Thickness of the loading platform: approx. 24 cm Due to the very low loading height of only approx. 45 cm, this low loader is ideally suited for the transport of tall machinery where the lowest possible overall height is crucial. The platform is telescopically extendable by an impressive 5.50 meters. This also makes the semi-trailer excellent for particularly long machines, structures and special transports. DETACHABLE GOOSENECK Equipped with a detachable gooseneck. This allows self-propelled machines to be conveniently driven directly onto the low platform from the front. Fodozy I Tvopfx Ah Tepl Ideally suited for the transport of: * Excavators * Crawler excavators * Bulldozers * Wheel loaders * Crawler cranes * Road construction machinery * Agricultural machinery * Heavy and special construction machinery AXLES & CHASSIS Equipped with 2 BPW axles, both of which are hydraulically steered. The hydraulic steering ensures excellent maneuverability and is a major advantage, especially in tight construction sites, industrial plants and special transports. In addition, the low loader has air suspension, which ensures good driving characteristics and optimal load distribution. WEIGHTS * Technical total weight: approx. 36,000 kg * Unladen weight: approx. 15,600 kg * Specified payload: approx. 22,600 kg Note: The specified weights should be checked against the vehicle documents, as the unladen weight and specified payload together amount to 38,200 kg. DIMENSIONS * Overall length of low loader: approx. 1,560 cm * Width: approx. 255 cm * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: ...

Condition: used, maximum load weight: 34,500 kg, overall weight: 48,400 kg, axle configuration: > 3 axles, first registration: 06/2009, next inspection (TÜV): 04/2027, Equipment: ABS, German semi-trailer, 1st owner, good condition 3 axles hydraulically forced-steered + adjustable steering with radio remote control 6.80 m extendable Faymonville STZ-4AX low-loader, SAF axles with drum brakes, 1 lifting axle + 3 steered axles, 4 fender extensions, 2 rear support legs, 2 Jost swivel supports at the front, 1 connection for rotating beacon, wooden floor, heavy-duty lashing points, 1 plastic storage box, aluminum loading ramps, air suspension (raise/lower), 2 driving heights, ABS, EBS, etc. Upper loading area -> Length: 3,700 mm / 1 row of crossmember pockets / 4 heavy-duty lashing eyes Lower loading area -> 9,400 mm + 6,800 mm / 2 rows of crossmember pockets + 1 row of crossmember pockets on the left and right in the outer frame / 16 heavy-duty lashing eyes Fedpfx Ajzy S R Eeh Tspl Height of lower loading area -> 790 mm Tires 205 / 65 R 17.5 Tread depth 1st axle: 10 / 9 / 9 / 7 mm Tread depth 2nd axle: 11 / 10 / 10 / 9 mm Tread depth 3rd axle: 12 / 11 / 10 / 10 mm Tread depth 4th axle: 8 / 8 / 5 / 2 2 spare tires: 12 / 11 mm Permissible total weight: 48,400 kg / Unladen weight: 13,900 kg / Payload: 34,500 kg TÜV valid until / Inspection certificate valid until 10-2026 !!! I SPEAK POLISH !!! WE SPEAK ENGLISH !!!

Condition: used, Year of construction: 2007, 2007 | Faymonville STBZ3 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 12 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fedpfx Ahjznmcls Tepl Tiltable bed trailer, with some body work to do. Has its own hyd-agregat. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40866 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, machine/vehicle number: YAFTL407100007347, loading space length: 13,300 mm, loading space width: 2,530 mm, Year of construction: 2007, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Drum brake system = Additional Information = Weights Unladen weight: 11,900 kg Payload: 36,100 kg GVW: 48,000 kg Condition Overall condition: average Technical condition: average Optical condition: average Additional Information Condition of front tires: 30% Front tires: 235/75 R 17.5 Rear tires: 235/75 R 17.5 Last inspection: 2026-08-12 Additional Information Fpjdpfx Ahozyvzzs Tel Please contact Lastas Sales for further information.