Used Schwarzmüller Semitrailers With Flatbed & Tarpaulin for sale (295)

Condition: used, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,620 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, suspension: air, tire size: 445/45 R 19,5, tire condition: 50 %, color: red, Year of construction: 2015, Equipment: ABS, Disc brakes, 3rd steering axle, platform extendable by 4 meters, cabin guard, container locks for 1x40', 2x20' and 1x20' balanced, load securing hooks, holes for lateral and transversal stakes, sloped tail with profile for aluminum ramp connection, rear support legs, retractable signs with lights for projecting load, ramp holder, toolboxes, spare wheel holder. Ijdpfxjyzxq De Anksia

Condition: used, functionality: not functional, machine/vehicle number: VAVSAP3387H242906, empty load weight: 7,050 kg, maximum load weight: 27,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2007, tire size: 445/40 r22,5, Further information: Air suspension with lifting and lowering function, disc brake axles, 2-speed landing gear supports with thrust equalization, plywood anti-slip floor, 13 pairs of lashing rings in the outer frame, 1 x 15-pin connector, 2 x 7-pin connectors. Double-wing rear doors, sliding roof, side curtain slider, 3 pairs of sliding rings, aluminium drop-in slats, plastic toolbox, spare wheel holder without wheel, lifting device, 2 impact buffers at the rear, customs cord. Iisdji Rivpspfx Ankja

Condition: used, functionality: fully functional, empty load weight: 6,290 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 385/55 R22,5", color: grey, Year of construction: 2018, The images are archive photos; the vehicle may still be in use! Chassis: Semi-trailer for haulage Fine-grain steel welded construction 24 t landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with compensation slide Extendable ladder at the rear Side door retainers Semi-shell mudguards over all axles Anti-spray flaps behind the 3rd axle 2 rear impact buffers 1 large plastic toolbox mounted on the right-hand side, 2 smaller plastic toolboxes on the left-hand side Perimeter tarpaulin rope with 2 holders on the front wall (not customs-sealed) Axles & Suspension: SAF disc brake axles Air suspension Brake System: Iodpfjwyiygsx Ankjia 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting hose EBS – electronic braking system with EBS socket at the front, no connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lifting and lowering valve Vehicle stability control system Wheels and Tires: 385/55 R22.5”, brand at manufacturer’s discretion Steel rims, factory silver Electrics: 24 Volt, multi-chamber lights, yellow LED side lighting 2 white LED position lights at the front 2 white/red LED contour marker lights at the rear 2 x 7-pin foolproof sockets at the front, no connecting cables Front wall / Front corner posts: 2 at 580 mm high, steel volume-type corner posts, release device for side curtain on front wall Rear wall / Rear corner posts: Steel corner posts at the rear up to the lower edge of the roof, curtain hooks with round tube and curtain tensioning ratchet Rear portal doors, 2-leaf, each with 2 interior rotary bar locks Curtain: Curtain with welded-in horizontal and vertical straps Tension locks made of stainless steel Roof: Sliding roof, rear up-liftable, can be pushed from rear to front Operating Instructions: When configuring the tractor-trailer combination, observe the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please note the following points: - The haulage contractor is liable for any resulting damages. - The transport driver must independently obtain a permit according to §29 StVO. - We accept no liability for the transfer of vehicles. Country of registration / plates: Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 A-sign Reflective strips: white along the bottom of the side curtain, red in the corners at the top, continuous around the rear portal Paintwork: Frame – color per manufacturer's choice Landing gear – black coated Front wall – aluminum Rear wall – white Curtain – grey Multiple units available!

Condition: used, empty load weight: 5,480 kg, maximum load weight: 28,520 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/2021, suspension: air, tire size: 385/65 r22,5, Year of construction: 2021, Equipment: ABS, SCHWARZMÜLLER J-Series ∗ULTRALIGHT∗ Tautliner ∗ LIFTING HOOD on both sides∗ ! ∗∗NEW∗∗∗∗ Sliding tarpaulin + Edscha soft top - SAF axles - Lift axle - ∗HUBDACH 400mm liftable on both sides∗ Brand: SCHWARZMÜLLER Type: J-series EZ: 05.2021 Tare weight: 5,480 kg Payload: 28,520 kg Total weight: 34,000 kg Technically permissible total weight: 39,000 kg -- ULTRALIGHT 5,480 kg -- Lightweight frame made of high-strength fine-grained steel -- Lifting roof 400mm liftable, on both sides, hand-hydraulic -- Hole outer frame with hole spacing approx. 100mm, for lashing -- 12 pairs of recessed 2.5 to. LASHING STRAPS (12 lashing straps per side) -- SAF Intradisc-B9 axles with disc brakes, 430mm 22.5" discs -- Lift axle -- ALCOA aluminum rims with MICHELIN tires ∗Mint∗ -- Aluminum air tank -- Aluminum front wall -- Front wall inside with 2 pcs. Lashing rings for load securing -- Front wall reinforced with 2 center supports -- Aluminum double doors -- Tubular tarpaulin for rear corner pillars with tensioning ratchet -- Sliding tarpaulin version according to CodeXL, Welded-in horizontal and vertical belt reinforcements -- Edscha soft top / sliding roof Aramid-reinforced roof tarpaulin, translucent -- Partial LED five-chamber tail lights "Europoint III" -- LED position lights at the front -- LED clearance lights at the rear -- Galvanized underride guard -- Side bumpers, black powder-coated -- Side reflective contour marking strips -- Rear reflective contour marking strips -- Single wheel mudguards -- Retractable ladder at rear right -- Air suspension -- Disc brakes -- SAF axles -- Lift axle -- Lift and lowering valve -- ABS/EBS -- Aluminum portal doors with 4-point locking -- Aluminum bulkhead -- Rear access ladder -- NIRO tool box -- Spare wheel holder -- Tires: 385/65 R22.5 -- MICHELIN tires ∗as good as new∗ Iiedsk Tu Ncepfx Ankoa -- etc. .... ..:: Please contact us before your visit, the office is not always occupied ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? If you agree, we will gladly take it in payment, The offer is non-binding and subject to change. Subject to errors and prior sale.

Condition: used, empty load weight: 6,520 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: grey, Equipment: ABS, Disc brake EBS Payload 32,480 kg Air-lift suspension Lifting and lowering device Pallet box BPW axles Isdpfx Anotv I Dnskeia Errors excepted

Condition: used, functionality: fully functional, machine/vehicle number: VAVJS1339EH344092, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/55 R22.5", color: brown, Year of construction: 2014, The photos shown are archive images; the vehicle may still be in use! Iiedpfewyixisx Anksa Chassis - Rear wall bumper pads, left and right - Extendable ladder at the rear - JOST landing legs - Underrun protection with lamp panel - Side door retainers - 3 pairs of center stanchions Axles - SAF axles Wheels and Tyres - 385/65 R22.5" tyres - Mud flap behind the third axle - Mudguard in front of the first axle and behind the third axle Accessories (quantities may vary) - ADR hazardous goods warning plate - A-board - 1 shovel with holder - 2 storage boxes - 1 pallet box - 1 document box Tarpaulin - Side curtain - Edscha Trailer Systems sliding roof Direct tarpaulin tensioner Aluminium insert slats (quantity may vary) The photos shown are archive images; the vehicle may still be in use!

Condition: used, machine/vehicle number: 438, empty load weight: 6,250 kg, maximum load weight: 32,750 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 r 22,5, color: green, Equipment: ABS, * Disc brake * EBS Iisdpfx Anolvu Hfjkja * Wheelbase 1,310 mm * Lifting and lowering device * BPW axles * Aluminum rims * Spray galvanized * Pallet box * 01/2021 Floor renewed * 02/2021 Pallet box renewed Errors excepted

Condition: used, maximum load weight: 31,050 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 06/2016, next inspection (TÜV): 06/2026, loading space length: 9,500 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, * Schwarzmüller 4-axle low loader with 2-part hydraulic folding ramps - high-coupled with 50 mm eyelet * Air suspension - BPW axles - disc brakes - Tyres: 245/70R17.5 * Overall length: 11,900 mm - Width: 2,500 mm (3,000 mm possible) - Height: 3,650 mm * Permissible total weight: 40,000 kg - Unladen weight: 8,950 kg - Payload: 31,050 kg * German vehicle - German registration papers - immediately available - from first owner * The left rear hydraulic support needs to be reconditioned * Viewing by appointment only Iijdpfx Aoy Dy Enenkea * Contact person: Mr. Andreas Vogel * The information provided online is non-binding descriptions. * They do not represent guaranteed characteristics. * The seller does not accept liability for typographical or transmission errors. * Subject to prior sale, changes, and errors.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, Year of construction: 2019, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – 1st to 2nd axle = 1,410 mm 2nd to 3rd axle = 4,530 mm 3rd to 4th axle = 1,410 mm = Further Information = Suspension: Leaf spring suspension Front axle 1: Steered Iodpfsym Alusx Ankoia Front axle 2: Steered Unladen weight: 8,200 kg Payload: 31,800 kg Gross vehicle weight: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2023, color: green, loading space volume: 11 m³, loading space width: 2,420 mm, loading space length: 5,100 mm, loading space height: 900 mm, mileage: 1,001 km, first registration: 01/2023, gearing type: other, driver cabin: other, Vehicle location: Bovenden, swing doors. Body: roll-off container with foldable aluminium side walls, approx. 11m³, total container length approx. 5800mm! The roll-off frame is from 2023 and the Schwarzmüller body is considerably older. The exact year of manufacture cannot be determined, as there is no type plate present! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted! Iodpfoy Dvdtox Ankjia

Condition: used, empty load weight: 3,660 kg, maximum load weight: 14,340 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2012, next inspection (TÜV): 12/2025, suspension: air, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axles, BPW axles, air suspension, ABS (anti-lock braking system), container lock, U-protection, side aluminum driving protection, twin tires, storage box Iiodpjvy Uz Rjfx Ankoa Construction: 2-axle roll-off trailer for transporting containers up to 7m, 2x 9t BPW axles, drum brakes! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, axle configuration: 3 axles, first registration: 10/2019, loading space volume: 25 m³, Year of construction: 2019, Equipment: ABS, Thermo tipper body, 3 axles Internal length approx. 7,650 mm (7,350 mm + 300 mm, due to external tailgate) Internal width approx. 2,330 mm Internal height approx. 1,470 mm Load volume approx. 25 m³ Maximum total width 2,550 mm - BPW EcoDisc axles with disc brakes Ø430 mm (22.5-inch disc) - Front axle automatically liftable = raises and lowers depending on weight; additionally equipped with forced lowering including integrated speed-limited traction assistance (Traction Help Plus) - Tyres 385/65 R 22.5 Isdpsy Dyuvofx Ankeia - Steel body with reinforced floor plating made of Hardox (HB450) and reinforced top chord - Floor thickness 5 mm = continuous floor plate, wall thickness 4 mm on front wall and sloping rear wall, flush at top edges - Thermal insulation approx. 50 mm thick with aluminum sheet cladding 1 mm, and 3 mm sealed at rear wall - High-pressure front cylinder for rear tipping, tipping angle approx. 48 degrees (approx. 600 mm clearance when raised) - Plastic rolling tarpaulin including aluminum pipe and hand crank - Partial LED rear lights - Additional LED reversing lights - Side-mounted broom/shovel holder on longitudinal beam All information without guarantee. Subject to errors. Prior sale reserved.

Condition: used, axle configuration: 2 axles, first registration: 07/2022, loading space volume: 25 m³, Year of construction: 2022, Equipment: ABS, Thermal tipping trough, 2 axles Internal length approx. 7,650 mm (7,350 mm + 300 mm, due to external rear wall) Internal width approx. 2,330 mm Internal height approx. 1,470 mm Loading volume approx. 25 m³ Overall width max. 2,550 mm - BPW EcoDisc axles with disc brakes Ø430 mm (22.5-inch discs) - Front axle automatically liftable = raises and lowers depending on load; additionally equipped with forced lowering including integrated speed-limited traction assistance (Traction Help Plus) - Tyres: 385/65 R 22.5 - Aluminium body in semi-circular segment design, floor thickness 6 mm = continuous floor plate, wall thickness 6 mm at front and sloped rear wall, flush top edge - Continuous Hardox steel wear plate 3 mm, approx. 2,430 mm wide, with welded aluminium edging - Thermal insulation according to DIN 70001: R-value 1.65 m²K/W (at 20°C) = complete body insulation approx. 50 mm thick with 1 mm aluminium sheet cladding, or 3 mm at rear wall, fully sealed - High-pressure front-mounted cylinder for rear tipping, tipping angle approx. 50 degrees (ground clearance when tipped approx. 650 mm) - Plastic rolling cover incl. aluminium tube with hand crank - Partial LED tail lights - Additional LED reversing spotlights - Side-mounted broom/shovel holder on the longitudinal chassis member Iijdpfx Aney Dyt Sekja All information provided without guarantee. Errors excepted. Interim sale reserved.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space volume: 25 m³, Year of construction: 2019, Equipment: ABS, Thermo tipper body, 3-axle Internal length approx. 7,650 mm (7,350 mm + 300 mm due to external rear wall) Internal width approx. 2,330 mm Internal height approx. 1,470 mm Loading volume approx. 25 m³ Maximum overall width 2,550 mm - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Front axle with automatic lift function, lifts and lowers depending on weight: includes forced lowering with integrated speed-restricted traction aid (Traction Help Plus) - Tyres: 385/65 R 22.5 - Steel tipper body with reinforced upper chord made of Hardox - Floor thickness 5 mm: continuous steel floor plate, wall thickness 4 mm (front and rear wall inclined, flush at the top all around) - Thermal insulation: R-value 1.65 m²K/W (at 20°C): complete body insulated with approx. 50 mm insulation and aluminium sheet cladding 1 mm (rear wall 3 mm, sealed) - High-pressure front cylinder for rear tipping, tipping angle approx. 48 degrees (ground clearance at rear lip approx. 600 mm) - Plastic roll tarp with aluminium tube and hand crank - Partial LED tail lights - Additional LED reversing lights - Broom/shovel holder mounted laterally on the longitudinal beam Iodpfoy Dyupsx Ankeia All information without guarantee. Subject to prior sale and errors excepted.

Condition: used, axle configuration: 3 axles, first registration: 04/2016, next inspection (TÜV): 03/2026, Year of construction: 2016, Equipment: ABS, Lift axle Isdpfx Anoy D Dkzskjia

Condition: used, empty load weight: 6,100 kg, maximum load weight: 22,200 kg, first registration: 12/2016, next inspection (TÜV): 03/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 28,300 kg,

Condition: used, empty load weight: 5,350 kg, maximum load weight: 30,650 kg, first registration: 05/2014, next inspection (TÜV): 04/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,650 kg, maximum load weight: 30,350 kg, first registration: 11/2013, next inspection (TÜV): 12/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 4,800 kg, maximum load weight: 13,200 kg, first registration: 11/2017, next inspection (TÜV): 10/2024, total length: 7,500 mm, total width: 25,500 mm, total height: 39,700 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 18,000 kg,

Condition: used, empty load weight: 5,600 kg, maximum load weight: 30,400 kg, first registration: 01/2014, next inspection (TÜV): 12/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 8mm, front tire size: 385 / 65 R 22.5 / 8mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,350 kg, maximum load weight: 29,650 kg, first registration: 07/2010, next inspection (TÜV): 05/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 35,000 kg,

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Iiedpfx Ansy Aug Rjkja Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program Iedpfx Ansy Auhnjkoia * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: used, maximum load weight: 29,430 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 11/2026, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2022, Equipment: ABS, 3-Axle Schwarzmüller SK Thermal Tipper VIN: MZ466132 Chassis / Attachments: * Air suspension * Lifting first axle * Jost landing legs * Tires: 385/65 R22.5 * Tire tread remaining: 1 = 30%, 2 = 20/50%, 3 = 20/50% * 3 x BPW axles with disc brakes * Foldable underride guard * Wabco Smartboard Body: * Thermal tipper body * Thermal insulation * Volume: approx. 25 m³ * Electric tarpaulin Marcolin Eletta, year 2021 * External rear tailgate * 2x hook locking system * Hardox steel Weights: * Gross weight: 36,000 kg * Payload: 29,430 kg Ijdpfx Ajy A Avaonkeia * Unladen weight: 6,570 kg Other: * German registration * Next TÜV inspection 11/2026 – Next safety inspection 05/2026 New main inspections, safety checks, as well as weight downgrades/upgrades available upon request. We are happy to assist with obtaining export/transfer license plates, and transport of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for typographical & printing errors, changes, prior sale and mistakes reserved! Who are we? Leible Nutzfahrzeuge is a family-owned commercial vehicle dealer based in Kehl am Rhein. With many years of experience in vehicle reconditioning and sales, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 sqm premises, you will find a wide variety of vehicles. Our company philosophy is marked by fairness and integrity. Customer satisfaction is our top priority; therefore, we offer a comprehensive service package and provide you with a knowledgeable contact person, supporting you through the purchase or sale of your vehicle. See for yourself! Our service for you: Loading vehicles We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist in organizing special transports. Temporary/export license plates We are happy to assist in obtaining export plates/short-term plates. Customs procedures We are happy to assist in handling customs formalities.

Condition: used, maximum load weight: 30,350 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 03/2018, Equipment: ABS, Vehicle Identification Number: VAVKSM236HZ401252 German Inspection (HU) valid until 03/2026 – Safety Inspection (SP) due Unladen weight: 5,650 kg Container dimensions: 7,580 x 2,330 x 1,480 mm Volume: approx. 25 m³ SAF axles with disc brakes Lifting axle Drop-down support legs External pendulum tailgate Access platform Adjustable underrun protection Tyres: 385/65 R 22.5 Modifications, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense under sales law. The agreement as per sales contract shall prevail. Iiedpoxdgbyjfx Anksa Our offer generally excludes a new TÜV inspection. Should a new TÜV inspection be required, we are happy to provide a quotation via our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general terms and conditions of delivery and payment apply.