Used Müller-Mitteltal Roll-Off Trailers for sale (267)

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Ndedpsv S H Sfsfx Agxea - .

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring brake cylinders ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost support leg at the front * External, hot-dip galvanized folding supports at the rear * Plastic tool box on the front right side, attached to the front wall * Lateral underrun protection * Plastic quarter fenders ----Low loader platform: * 50 mm softwood flooring * Mounting device for subsequent installation of container locking mechanisms in front of the front wall * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with sideboard lifting mechanism * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside, in front of the front wall * Rear cross members bolted Ndodpsrvvflofx Agxja ----Load securing: * Perforated outer frame, bent at approximately 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * 1 x 6.3-ton lashing point at each front and rear corner * Various holes in the front and end cross members for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis, in the middle, for lashing with a load capacity of up to 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: Njdpeq Euagjfx Agxeda * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tractors * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the side, right * 2-step step on the left side in the direction of travel at the front * Underrun protection, bolted * Plastic fender ----Tipping body: * Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5-ton lashing point in each corner * As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks * Lockable storage compartment at the rear below the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized * Axles, springs, air tank, flange coupling, and support winch painted in a black tone * Painting of the side boards in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: used, machine/vehicle number: GE11/142/2022, empty load weight: 6,350 kg, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2008, loading space length: 8,500 mm, loading space width: 2,500 mm, suspension: air, Very well-maintained vehicle from first owner Three-axle low-loader trailer Low-loader with drive-up ramp Heavy-duty transport Model T3 Komakt 30.0 Length 8,500 mm Width 2,500 mm Air suspension Commercial/export net price – €15,990 Subject to changes, interim sale, and errors ===== Njdpfxsn Aw Hkj Agxeda Phone2 Mobile =====

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve Ndodpfxol Tq Nme Agxja ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash guards * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as an anti-slip surface in the track area of the ramp * Mechanical rear support legs ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall beam * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes each on the sides in a cloverleaf design * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, and air tank are painted in a black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approximately from week 43 / 2026

Condition: used, maximum load weight: 4,960 kg, overall weight: 10,500 kg, first registration: 04/1993, next inspection (TÜV): 01/2026, loading space length: 6,260 mm, loading space width: 2,430 mm, loading space height: 2,430 mm, loading space volume: 37 m³, Equipment: ABS, tail-lift, 2-axle tandem refrigerated trailer 7 m with 1-ton tail lift. * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 Ndsdpsykxfljfx Agxsa * Tail lift * Air suspension * EBS * Anti-lock braking system (ABS) No liability for typographical or printing errors. Sales to business customers only. Subject to prior sale and errors. Changes, interim sale, and mistakes expressly reserved. The description is provided for vehicle identification purposes and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs plates valid for 30 days All export customs documentation possible, but must be requested separately * Toll for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Always over 200 vehicles in stock

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version Nedpfxjmi Tcqs Agxeda * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar, height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical system / Lighting: * 15-pin power connector Njdpov D Tbkefx Agxeda * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each on the left and right side * Lateral impact protection * Underrun protection * Plastic quarter fenders ----Loading area: * 400 mm high bolted front bulkhead * 50 mm hardwood flooring * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load securing: * Perforated outer frame, bent at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * 1 x 6.3-ton lashing point in each corner, front and rear (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading area from the rear ----Painting: * ---Chassis, drawbar, front bulkhead, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from week 39/2026

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel superstructure, 2 axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, storage box, drop-down side panels. Superstructure: 2-axle, 3-sided tipper trailer, Gigant axles, drum brakes, frame hot-dip galvanized, automatic tailgate opening, 12 & 24V lighting! Ndodpfx Aewth Iiegxsa Loading height approx. 1290mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, maximum load weight: 10,950 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 04/2007, next inspection (TÜV): 04/2027, total width: 2,550 mm, total height: 1,500 mm, Equipment: ABS, * Air suspension ----* Tire size: 285/70R22.5 * Technically permissible total weight: 13,500 kg * Unladen weight: 2,550 kg * Overall length: 6,600 mm * Next inspection due: 10/2026 ----Vehicle number: 12150----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We would be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----Your VTS Team Nedpfezb Avijx Agxeda

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3-in-1: Suitable for roll-off containers, demountable containers, and as a low-bed trailer. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with a 40 mm drawbar eye and height adjustment device ----Electrical System / Lighting: * TPMS (tire pressure monitoring system), display option in the truck via EBS signal (without truck-side installation) * LED tail lights, 12 / 24 V * 15-pin power socket ----General Components: * Toolbox made of powder-coated sheet steel * Spare wheel holder in the body design, on the right side * Closed side underrun protection * Plastic quarter fenders with splash guard * Plastic impact protection buffer at the rear * Folding A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frames for guiding the roll-off containers * Sheet steel floor with recesses for the rollers in the bogie area * When transporting roll-off containers, a continuous length of 5,500 - 7,000 mm is possible * Pneumatic 4-point clamping lock, as well as mechanically pluggable stop angles at the front in the track * Transport of up to 2 demountable containers with a maximum volume of 10 m³ is possible * Includes 8 repositionable container stops for lateral centering of the containers, front 4 container stops plugged in with pivoting stops * Weld bead as an anti-slip surface in the track area of the access ramp * Mechanical support legs at the rear ----Load Securing: * 3 pairs of 10-ton certified lashing rings on the sides for attaching tensioning elements for form-fitting and force-locking securing of the containers, 4 lashing straps each in a cloverleaf design (on the sides) * 1 pair of 13.4-ton certified lashing rings at the front * 4 x 8-ton lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum access ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Reflective contour tape on the sides and rear Ndedpfx Agjl Tld Iexea * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available from Egstorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3-in-1: suitable for roll-on/roll-off containers, skip loaders, and as a low-bed trailer ----Brakes: * EBS-E (electronic braking system) Nsdpfxel Tnwzj Agxsda * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm drawbar eye and height adjustment ----Electrical System / Lighting: * TPMS (tire pressure monitoring system), display option in the truck via EBS signal (without truck-side installation) * LED rear lights 12 / 24 V * 15-pole electrical connector ----General Components: * Toolbox made of powder-coated sheet steel * Spare wheel holder in a box design on the right side * Closed side underrun protection * Plastic quarter fenders with splash protection * Plastic rear impact protection buffer * Folding A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frames for guiding the roll containers * Steel sheet floor with recesses for the rollers in the bogie area * When transporting roll-on/roll-off containers, a continuous length of 5,500 - 7,000 mm is possible * Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track * Transport of up to 2 skip loaders with a maximum volume of 10 m³ is possible * 8 repositionable bin stops for lateral centering of the bins, front 4 bin stops locked with pivoting stops * Weld bead as an anti-slip surface in the track area of the ramp * Mechanical support legs at the rear ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning elements for positive and frictional securing of the bins, 4 lashing straps in a cloverleaf design (on the sides) * 1 pair of 13.4-ton UVV lashing rings at the front * 4 x 8-ton lashing eyes embedded on each side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Reflective contour striping on the sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Technically possible gross vehicle weight of 20,000 kg-- * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egstorf

Condition: used, maximum load weight: 14,980 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 11/2019, loading space length: 7,800 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 10,300 mm, total width: 2,550 mm, Total weight: 18,000 kg / 20,000 kg Ndedjzvun Sopfx Agxja Unladen weight: 5,020 kg Payload: 12,980 kg / 14,980 kg Overall length: 10,300 mm Loading length: approximately 7,800 mm total / approximately 6,000 mm low-bed including rear overhang Width: 2,550 mm Loading height: 900 mm Further information: Storage compartment in the goose neck large lashing kit rung pockets hydraulic ramps, laterally adjustable twin tires BPW axles underride protection 4 x plastic toolboxes LED reversing lights rotating beacon

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar ---- Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing gear at the front * External folding support legs at the rear * Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on chassis - loading height + 20 mm * 50 mm softwood floor in clamped design * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist * Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers ---- Ramps: * One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart) * Rear ramp slope approx. 860 mm ---- Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 Ndedpfx Agjpk D D Hjxsa ---- Paintwork: * Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Side wall paintwork in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ---- Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ---- Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: * Technically possible gross vehicle weight of 30,000 kg Ndodel Th I Aspfx Agxea * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: used, empty load weight: 3,290 kg, maximum load weight: 8,610 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 05/2027, loading space length: 7,100 mm, loading space width: 2,500 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminum fender, adjustable drawbar. Ndsdpfxoy Ui Ite Agxoa Superstructure: Tandem low-bed trailer with mechanical ramps and wooden floor. Loading height approx. 920mm, 2 x Gigant axles, drum brakes, frame and ramps galvanized! Currently derated to 10,000 kg (payload 7,610 kg), 40 mm drawbar eye. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Ndsdpfx Agex Dzn Uoxoa

Condition: new, maximum load weight: 15,970 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 21.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Lighting / Electrical System: * 15-pin power connector * LED lights 12/24 V * TPMS (Tire Pressure Monitoring System) ----General Components: Nodol Tihxspfx Agxeda * Jost support leg at the front * Outboard folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter fenders ----Low-Loader Platform: * In front of the headboard and rear slope, provision for retrofitting container locking mechanisms for transporting 20" containers * Design for 21 tons GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm hardwood floor in a clamped design * In front of the headboard, provision for retrofitting container locking mechanisms * Bolted headboard made of smooth sheet metal * Divided side walls made of steel sheet - trapezoid profile - foldable with folding mechanism in the middle * Steel rear wall can be slid between the ramps - bracket for storage when not in use inside in front of the headboard * Rear supports bolted ----Load Securing: * Perforated outer frame approx. 45 degrees angled, with 2 tons lashing force every 480 mm * Installation of 3 tons tie-down brackets every 600 mm possible * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN * In the corners at the front and rear, 1 x 10 tons lashing each * Lasi package with 2 x 8 tons lashing points each on the sides, recessed in the outer frame, various holes in the front and end beams for 1.2 tons lashing ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be moved together to 20 mm) * Approach slope at the rear approx. 860 mm chassis ----Loading Heights: * Unloaded approx. 940 mm * Loaded approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Paint: * Painting of the side walls in RAL - 9010 pure white * Drawbar, headboard, rear flap, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support leg painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Condition: new, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5-ton BPW axles ----Suspension: Ndsdpfx Ajy U A Elogxsa * Air suspension with lift and lower system ----Drawbar / Flange Drawbar: * Drawbar with 300 mm height adjustment * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar ---- Electrical System / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm hardwood floor * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension when retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * At the corners at the front and rear, each 1 x 6.3-ton lashing point (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beam for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,310 x 410 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading platform at the rear ----Painting: * Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized * Axles, air tank, front support winch, and flange drawbar painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Condition: new, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Air suspension with lift and lower system ----Drawbar / Flange Coupling: * Drawbar adjustable by 300 mm in height * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical System / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Support winch at the front * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Platform: Ndodpey U A Efjfx Agxoa * 400 mm high, bolted end wall * 50 mm hardwood flooring * 2 pairs of container locking mechanisms (extendable to 3 m container outer width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking mechanisms extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 tons lashing force every 480 mm * Installation of 3 tons lashing eyes possible every 600 mm - 5 x 3 tons UVV lashing eyes installed on each side - * In the front and rear corners, 1 x 6.3 tons lashing point each (at the front, directly behind the container locking mechanisms in the wooden floor, and at the rear in the end beam) * Various holes in the end and end beam for 1.2 tons lashing capability ----Ramps: * 1 pair of aluminum insert ramps approx. 3,310 x 410 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed from the rear below the loading platform in the chassis ----Painting: * ---Chassis, drawbar, end wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, support winch at the front, and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. week 38/2026

Condition: used, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/1989, loading space length: 4,850 mm, loading space height: 1,500 mm, total length: 7,150 mm, total width: 2,500 mm, More information: - Height-adjustable drawbar - Height-adjustable support leg - Side walls divided in the middle Njdpfx Aozvun Esgxoda - 900 mm side walls

Condition: used, empty load weight: 4,190 kg, maximum load weight: 13,810 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, 800 mm aluminum side walls, surcharge for ramps €800, -- misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Ndsdpfx Aezv I Tnjgxoa

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit Nedpfxjl Tilxe Agxoda ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter fenders * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipping bridge: Njdpfx Agoq Hg Dxjxsda * Net hooks on the side and rear in the bearings of the central locking system, as well as 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with sideboard spring lifters * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, embedded in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and track vehicles * Lockable storage compartment at the rear under the loading area, embedded in the chassis ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and support winch painted in a black tone * Sideboard painted in RAL 9010 pure white * Painting of the side walls in a RAL color against extra charge * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 45/2026