Müller-Mitteltal T 3 Profi 30

Müller-Mitteltal T 3 Profi 30

Condition: used, maximum load weight: 17,740 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2016, Equipment: ABS, Müller-Mitteltal T3 Profi 30.0 3-axle, hydraulic ramps, twin tires, BPW axles, extendable, drum brakes, ABS. Blodpfez Shvnex Adwop Payload: 17,740 kg

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) Bsdpfol Th Adjx Adwolp * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Bsdpel Thxdefx Adwolp * Immediately available ex Egestorf

Condition: new, maximum load weight: 24,350 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, B mm Unladen weight 5650 kg Axle load 3 x 10,000 kg Loading length over the turntable 1,900 mm incl. 285 mm slope Loading length 6,500 mm Loading height 855 mm Width 2550 mm, expandable to 3000 mm Excavator trough in the rear chassis Gigant axles 1-piece spring ramp, 3,000 mm long, 720 mm wide Foldable supports at the rear Storage box Bledoz Htxbjpfx Adwsp Galvanized Fifth wheel coupling 40/50 mm eye

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 to BPW Eco axles ----Suspension: * Air suspension with raising and lowering function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection * Reflective contour strips on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform ----Low-bed platform: * 4 lashing points on each side with simultaneous 2 to lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides ----Load securing (La-Si package): * 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to. ----Excavator arm rest: * Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest) ----Loading area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading height: Bodpfx Adsl Tpwyjwolp * Unloaded approx. 1,070 mm * Loaded approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf, near the A7 motorway

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 to BPW Eco axles ----Suspension: * Air suspension with raising and lowering function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Smart-Board as an information tool Bsdjl Tq Euopfx Adwjlp * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection * Reflective contour strips on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform ----Low-bed platform: * 4 lashing points on each side with simultaneous 2 to lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides ----Load securing (La-Si package): * 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to. ----Excavator arm rest: * Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest) ----Loading area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading height: * Unloaded approx. 1,070 mm * Loaded approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf, near the A7 motorway

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of molded plastic, and straight, galvanized steel splash guards at the rear, each with splash protection * Reflective contour strip on the sides and at the rear ----Low-loader platform: * Folding cover (hot-dip galvanized) for the tool compartment in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing option * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not on the rear slope) * Extension boards stored in the center of the loading area ----Load securing (LaSi package): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame - 13.4 tons in the corners, otherwise 10 tons ----Excavator arm rest: * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4-ton lashing points on the side in the excavator arm rest) ----Ramps: * Hydraulically operated, one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic side ramp shifting Blsdpfx Aox Ipbgjdwjp ----Loading area: * over the turntable: approx. 1,960 x 2,520 mm * rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach angle) ----Loading height: * unladen approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paint finish: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black hue * Vehicle is hot-dip galvanized ----Information: * --technically possible gross vehicle weight of 30,000 kg-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: ----Brakes: Blodpfx Aox Ipb Hsdwsp * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via coil spring and tension lock ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED taillights * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of molded plastic and straight, galvanized steel splash guards at the rear, each with splash protection * Reflective contour tape on the sides and rear ----Low-Loader Platform: * Folding cover (hot-dip galvanized) for the tool compartment in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension planks stored in the center of the loading area ----Load Securing (LaSi Package): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end carrier, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Ramps: * Hydraulically operated, one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic side ramp adjustment ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) ----Loading Height: * Unladen: approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * Vehicle is hot-dip galvanized ----Information: * --Technically, a maximum permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco axles ----Suspension: Bsdpfex Ipa Nox Adwolp * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking pin ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle covered in plastic mudguards, rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and at the rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards stored in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4-ton lashing points on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing points, swiveling and lowering, loadable in all directions and recessed into the outer frame in the corners, 13.4 tons, otherwise 10 tons ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: * --Technically, a permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low Loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards placed in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and embedded in the outer frame in the corners at 13.4 tons, otherwise 10 tons. ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: Bodpex Ipavjfx Adwolp * --Technically possible gross vehicle weight of 30,000 kg-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf