Used Müller-Mitteltal Concrete Mixer Semitrailers for sale (237)

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,000 kg, axle configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners Cebu Tjl Tlhrjfrysgt * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,600 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller? Mitteltal ETÜ-TA-R 19 Plateau - low loader? Tandem trailer with ramps * NEW VEHICLE without registration, available beginning of July 2025 (please pre-order) * Leasing, financing, trade-in, delivery to your yard possible ---- Inquiry No. 18615 (sample photos) * GVW: 19t, NL: 14.60t * Bolted front wall made of smooth sheet metal (hot-dip galvanized) * Bolted rear stanchions (hot-dip galvanized) * Loading area made of 50mm thick softwood flooring, 6.27m x 2.47m * Front fixture for retrofitting container locks * Lashing and Safety Package: * 4 UVV lashing rings, LC 8000daN, mounted to the existing hole pattern in the 45° outer frame, recessed in the cross member at the front and rear * 2 pairs of LC 10,000daN, recessed in the cross member at the front and rear, lowerable * Perforated outer frame (45° folded with hole pattern for lashing devices), lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. * Additional 10 UVV-compliant lashing brackets (LC 3000 daN) recessed into the existing hole pattern in the outer frame. * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end beams. * Toolbox in front of the front wall included. * Ramps: one-piece with hot-dip galvanized gratings in anti-slip design. * 2 UVV folding supports at the rear. * LED lighting. * 2 additional LED reversing lights on the rear. * Flashing LED side marker lights * Chassis and drawbar (hot-dip galvanized) * Parabolic springs, 235/75 R17.5 (8 tires) with tire pressure monitoring system * EBS 2S/2M and spring-loaded parking brake * Drawbar with offset plate (+77/-33mm) without height adjustment and 50mm towing eye * Hardwood excavator bucket storage on the bulkhead * 1 LED warning light at the rear (removable) ----Trade-in / financing / hire purchase with/without down payment / residual value possible, e.g., for 72 months. e.g., €480 / month We are a MüllerMittelt trading partner! ----Our Opening Hours Mondays - Thursdays: 8:00 AM - 5:00 PM Fridays: 8:00 AM - 3:00 PM Outside of opening hours, we are available by appointment. Cgjbu Tfrswbl R Dsyot We speak German, we speak English, we speak Polish, we speak French.

Condition: used, overall weight: 13,000 kg, maximum load weight: 8,620 kg, axle configuration: 2 axles, loading space volume: 28 m³, loading space length: 5,680 mm, loading space width: 2,440 mm, loading space height: 2,080 mm, first registration: 04/1995, Equipment: tail-lift, * 9444 - Vehicle ID for telephone inquiries * Type: EAL-TA-P * Leaf suspension, drum brakes, front support winch, height-adjustable drawbar * Kappler beverage case, swivel wall over roof, locking beam for rear load securing * Bear tail lift 1,500 kg, TH: 2.15 m, own batteries * 1st axle tires: 275/70R22.5 ( 8 / 15 mm ) * Tires 2nd axle: 275/70R22,5 ( 4 / 3 mm ) ----our e-mail address: our service for you: - Procurement of short-term or customs license plates - Transfer / delivery EU-wide - Customs clearance of vehicles to third countries Yesli u vas yest' voprosy na russkom yazyke, vy mozhete pozvonit' po sleduyushchemu nomeru * WhatsApp just for russian speakers: * Whatsapp for english, german and other languages: Cjbusu T Ag As Tfryegt

Condition: used, overall weight: 11,900 kg, empty load weight: 3,100 kg, maximum load weight: 8,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 04/2018, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, under-tubing, front and rear outriggers, pendulum tailgates, height-adjustable drawbar. Construction: Tandem tipping trailer with loading ramps. Currently rated at 10,000 kg, can be increased to 11,900 kg. Cgobu Tfrswa Dwysyst Galvanized frame, Gigant axles, drum brakes! Loading height approx. 950 mm! Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: used, axle configuration: 2 axles, Year of construction: 2000, = Additional options and accessories = - Air suspension at the rear - Air suspension at the front = Notes = Tandem tipping trailer, steel three-way tipper, internal dimensions approx. 5,000 x 2,330 x 900 mm, side walls swinging with central locking, rear side wall swinging with automatic opening. SAF axles, tires 385-65R22.5, ABS, air suspension. Two-speed support winch at the front, towing eye 50 mm, 1-wire hydraulic, 2-wire air, 24 volts. Gross vehicle weight 18,000 kg, payload 13,400 kg. Chassis gray, body green. = More information = Empty weight: 4,600 kg Payload: 13,400 kg Csbujvppdfs Tfryogt GVW: 18,000 kg Front tires: 385-65R22.5 Rear tires: 385-65R22.5 Country of production: DE Contact Jan-Marc Schwickert for more information.

Condition: used, overall weight: 18,000 kg, maximum load weight: 15,100 kg, axle configuration: 2 axles, first registration: 11/2009, Equipment: ABS, Müller Mitteltal RA-T 18 Roll-Off Trailer Container with External Roller Int. No. for inquiries: 0325228 * Body manufacturer: Müller Mitteltal * Type: RAT 18 * Gross vehicle weight: 18 t * ABS * 2-axle air suspension * Aluminum underride guard * Disc brakes Cobu Tsv Uuflsfrysgt Tires: 1st axle: 385/55 R 22.5 air suspension / 35% 2nd axle: 385/55 R 22.5 air suspension / 35% ----Price: €5,900 + 19% VAT For further questions, please contact us at the following numbers: We speak: German, English, French, and ????? Subject to typographical errors, mistakes, and prior sale.

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Lateral impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle closed plastic mudguards and rear axle straight galvanized. Sheet steel aprons each with splash guard Cgebu Tfjq Dyv Ioryot * Reflective contour tape on the side and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm - black powder-coated - on the side under the chassis * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * 4 stake pockets on each side (but no stakes available) with simultaneous lashing option * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the bogie platform * 5 pairs of UVV lashing rings that can be swiveled and lowered * Can be loaded in all directions and embedded in the outer frame in the corners 13.4 tons. otherwise 10 tons * 6 pairs of mechanical folding booms for 3 mtr. total width (but not in the rear slope) * Widening planks stored in a storage compartment under the loading area * Excavator boom storage above rear axle to the end beam approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator boom storage) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulic lateral ramp shifting * Hydraulic. Flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters to max. 140 liters / min.), two-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm, (incl. 860 mm approach slope) * Loading height when loaded approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding boom, rear drop supports and loading ramps hot-dip galvanized. * Axles, springs, pull scissors, air tank etc. painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,770 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal ETÜ-TA-R 11.9 Low-Loader Tandem Trailer/Ramps * NEW VEHICLE without EZ, * immediately available * RAL 7016 Anthracite Inquiry No.: 11491 * GVW: 11.9t, NL: 8.77t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27m x 2.47m x 0.4m laser-welded, foldable steel side walls, 2 spring jacks * Bolted end wall made of smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized) inserted in front of the ramps with empty brackets behind the end wall * Bolted rear stanchions (hot-dip galvanized) * 50mm thick softwood floor. * 4 x UVV lashing rings LC 6300 daN recessed in the front and rear cross members, * 10 x UVV lashing brackets LC 3000 daN recessed in the existing hole pattern in the outer frame * Ramps: one-piece with hot-dip galvanized gratings in anti-slip design * Device for retrofitting container locks in front of the bulkhead * Plastic toolbox in front of the bulkhead * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 tires), parabolic springs, BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm drawbar eye * 2 LED reversing lights on the rear of the trailer * LED lighting system for 12 and 24 Volts * Side marker lights with Turn signal control * 1 removable rotating LED beacon (hazard warning light) including bracket and installation---- * Financing through our cooperation partners * Hire-purchase example from our cooperation partner FM LeasingPartner: €485 per month net for a 60-month term with no down payment and €0 remaining. Other terms with or without down payment/residual value are possible. Request a quote from us! * We are a MüllerMitteltal trading partner!---- * Our opening hours * Mondays - Thursdays: 8:00 a.m. - 5:00 p.m. Cjbsvym Tleu Tfryjgt * Fridays: 8:00 a.m. - 3:00 p.m. * Outside of opening hours, we are available by appointment. * We speak German, we speak English, ????? ?? ????? ?????, we speak Polish, we speak French

Condition: used, overall weight: 6,500 kg, maximum load weight: 4,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, first registration: 07/1979, next inspection (TÜV): 04/2026, Year of construction: 1979, total width: 2,500 mm, total height: 3,000 mm,

Condition: used, Year of construction: 2003, Müller-Mitteltal KA-TA-L. Year: 2003. 9 tons BPW axles. Weight: 4550 kg. Load Capacity: 13,450 kg. Max weight: 18,000 kg. Air suspension. Dimensions inside 3 side tippers: Csbjv Syqusu Tfryjgt L: 5000mm. W: 2300mm H: 1000mm. Tires: 385/65R22.5 70%. German Trailer! ID NO: 370. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of manufacture: 2003 Empty weight: 4,550 kg Payload: 13,450 kg GVW: 18,000 kg = Company information = For more information: WhatsApp:

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,150 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,530 mm, first registration: 10/2004, Year of construction: 2004, total width: 2,530 mm, total height: 1,100 mm, Equipment: ABS, 2-axle Müller-Mitteltal TP platform FIN: 40048317 Chassis / add-on parts: * 2 x SAF axles with drum brake * 102 cm ride height * Air suspension * Tires: 235/75 R.17.5 * Residual profile: approx. 50-70% * Double tires * Rear drop supports * Widening plates Superstructure: * Platform * Platform dimensions: 7,250 mm x 2,530 mm * Lashing eyes on the side * Mounting for loading ramps * Loading ramps included * Loading area with rubber coating Weights: Csbsvb Rvmou Tfryogt * Total weight: 18,000 kg * Payload: 13,150 kg * Unladen weight: 4,850 kg Other: * German vehicle * New HU possible on request New general inspections / safety inspections or weight reductions/additions are possible on request. We will be happy to assist you in obtaining export/transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Please contact us at ---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors excepted!----Who are we ? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Daily numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Completing customs formalities We are happy to help you with customs formalities.

Condition: used, overall weight: 10,500 kg, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, first registration: 09/2009, next inspection (TÜV): 04/2025, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Cgsbu Tfsv S H Sforyot Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: new, overall weight: 30,000 kg, maximum load weight: 16,400 kg, axle configuration: 3 axles, Year of construction: 2024, * T3 profile 30.0: * EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for pressure display for total axle load display for each axle group * Side impact protection * Mechanically adjustable warning sign packages at the front and rear * Front axle closed. Plastic fenders and rear straight galvanized sheet steel aprons, each with splash guard * Hinged lid (hot-dip galvanized) for the tool box in the bogie platform * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) on the right side * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with indicator control * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber covering on the folding ramps and on the ramp on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood floor on the running surfaces of the low-loading platform * 4 stake pockets on each side with a simultaneous 2 ton. Lashing option * La-Si package consisting of: 5 pairs of UVV lashing rings that can be swiveled and lowered, can be loaded in all directions and are embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Plank holder under the loading area in the longitudinal direction * Roller stop raised in front of the front beam with 1 x 6.4 ton lashing eye on each side Cobueq Dyvcs Tfryjgt * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves * Hydraulic lateral ramp shifting * Hydraulic rear support (single-stage cylinder) * Hydraulic. Flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters up to max. 140 liters/min.) * Hydraulic control block splash-proof * Two-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm, * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loading height when loaded approx. 890 mm +/- 20 mm air suspension * Chassis, bogie, roller stop, folding extensions & ramps hot-dip galvanized. * Axles, turntable, pull scissors, air tank etc. painted in a black tone * Loading height when loaded: approx. 890mm +/- 20mm * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,600 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader - Drive-over Platform Trailer NEW VEHICLE including COC * Gross vehicle weight: 21 t, NL: 16.60 t, galvanized chassis * Available from April 25, 2025 * Platform version with 400 mm high bulkhead, ramp secured by ramp support rods and inclined supports * 21 t gross vehicle weight version. Reinforced frame and axle, and axle spacing 1,810 mm, * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high bulkhead, * Extended ramps: 3,000 mm hot-dip galvanized, one-piece ramps with hot-dip galvanized gratings, * Ramp jack with vertical, adjustable springs for easy one-person operation * La-Si package: 4 UVV-compliant drop lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame (approx. 5 mm protruding), arrangement: each indented approx. 1,000 mm from the front and rear beams * 10 UVV-compliant 3,000 daN lashing brackets, retractable into the existing hole pattern in the outer frame, * Softwood floor, 50 mm. Two UVV-compliant lashing rings each, recessed into the cross member at the front and rear, with a LC of 10,000 daN. * Additional lashing options are provided through holes (Ø 50 mm, LC of 1,200 daN) in the front and rear beams. * Device for retrofitting container locks Cjbovw Hvzsu Tfrysgt * Gigant air suspension including EBS 2S/2M * Lifting and lowering * 235/75R 17.5 (8-piece) twin tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, on the right side in the direction of travel * LED lighting system * 7-pin socket on the rear side, used for overlength lighting with taillight (58 R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Warning sign for overwidth * 1 removable rotating LED beacon including bracket and installation * Folding outriggers at the rear, support leg at the front with geared winch * ---- Rent-purchase example from our cooperation partner MMV Leasing: €639 per month net for a 60-month term with no down payment and €0 remaining Other terms with / without down payment / Residual value possible! We are a MüllerMitteltal retail partner ----* Our opening hours * Mondays - Thursdays: 8:00 AM - 5:00 PM * Fridays: 8:00 AM - 3:00 PM * Outside of opening hours, we are available by appointment * We speak German, we speak English, we speak Polish, we speak French * Leasing, financing, and trade-in are available

Condition: excellent (used), Functionality: fully functional, overall weight: 40,000 kg, empty load weight: 7,600 kg, axle configuration: > 3 axles, first registration: 08/2020, suspension: steel, tire size: 235 / 75 R 17.5, Year of construction: 2020, MÜLLER MITTELTAL T4 PROFI 40.0 (LOW LOADER) MÜLLER MITTELTAL T4 PROFI 40.0 Item number: - Manufacturer number: - Internal number: - Available: 1 unit Manufacturer: MÜLLER MITTELTAL (Used) Type: T4 PROFI 40.0 First registered: 08/2020 Serial number: WMM00000L0XXXXX Total weight: 40,000 kg Own weight: 7,600 kg Payload: 32,400 kg Tires: 235/75 R 17.5 / Continental / HTR2 (9 mm) External dimensions: 2600 + 390 + 6780 x 2520 GROSS PRICE INCLUDES 19% VAT. VAT IS DEDICATED. DELIVERY POSSIBLE Special equipment: Accessories: 4 wheel chocks with clamping device, 1 rotating beacon, 1 warning package, 16 folding booms with planks. Hot-dip galvanized hinged lid for the toolbox in the bogie platform. Removable rotating beacon (hazard warning light), incl. bracket and installation. Warning package for exemption according to § 70 StvZO (German Road Traffic Licensing Regulations). Mechanical compensation unit with parabolic springs, galvanized folding booms at the front and rear (8 pairs) and wooden planks for widening. Plank holder under the chassis. Excavator boom storage over the rear axle continuously up to the end beam, total length 2,300 mm, cross member tapered at the ramp, width top/bottom approx. 740/400 mm, height 190 mm. Axle make. GIGANT Cjbu Tfrev Sm Ndoyjgt La-Si package: 2 LC 6,400 daN lashing rings on the front left and right of the DG platform on the main frame. 8 LC 10.000 UV lashing rings for swiveling the small boom, 2 plug-in elastic rings, 2 pieces. Low-loading platform, 2 in front of the 3rd axle, 2 between the rear axles 2 pairs of LC 6400 daN lashing rings in the excavator boom storage area on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the slope, permanently welded, suitable for galvanization Front extension in front of the bogie platform by approx. 520 mm with 45° corners, with 3 storage compartments including cover, hinged lid opens to the rear, lockable Motor-hydraulic ramp jack (vertical cylinders) including load-holding valve. The hydraulic pump capacity in the truck. Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 L/min. up to max. 140 L/min.) Hot-dip galvanized chassis and bogie. Lashing rings LC 13.400 in bolted design. Drawbar, slewing ring, axles with springs, and air tanks in a black shade. With a platform length of 6780 mm, larch wood flooring instead of spruce/fir on the low-loading platform per run. Meter ABS system instead of EBS, with ALB control on the 2 3 3 / E 3 5 - S t C C H V e r D i n d u n g a c h 1 s o 7 6 3 9 ( not permitted with air suspension) 2 LED reversing lights on the rear of the trailer, switched on with reverse gear, max. 2 additional units permitted Hardwood 50 m on ramp, heavy series 3,000 % 720 mm

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,780 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 10/2019, Year of construction: 2019, Equipment: ABS, * Drum brakes * Mount for ramps * Gigant axles Cgsbu Tfjv Tf T Doryst * Drum brakes * Height-adjustable drawbar * and much more * Subject to errors and prior sale

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, first registration: 06/2024, Year of construction: 2023, total width: 2,550 mm, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Cgebjvy Tvteu Tfryot Further information New: No

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * including 2 ratchet tensioning cables permanently mounted on the outer frame with chain case * on both sides with eyelet and quick shortener in Y-special design 6.3 ton * clamping force with Lasi certificate * Wabco EBS * RDÜ tire control monitoring system * emergency release device for spring-loaded cylinders * drum brakes Cgobu Tfrepk Dyxjyst * 2 x 7 ton Gigant axles * parabolic springs with compensation unit * Jost support winch at the front * 2 x external drop supports at the rear * height-adjustable +/- 150 mm hot-dip galvanized drawbar * hot-dip galvanized chassis * 15-pin power plug * multi-chamber tail lights * closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with swinging stop that can be plugged into 4 positions, * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available from week 20/2025

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,080 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, tail-lift, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 tonnes. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm screw drawbar eye * Jost support winch at the front, side impact protection * Foldable A-plate at the rear * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * Plug-in steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm in the front area including 2 trough stops at the front that can be plugged into 2 positions * 4 reversible trough stops that can be plugged into 2 positions for laterally centering the troughs * 1 x (13.5 ton) UVV lashing ring on each side for hanging tensioning elements * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) * Rear cross member for attaching aluminum ramps including 2 additional rear fall supports * Loading edge unloaded approx. 710 mm * Chassis, bulkhead, side walls, fender, drawbar, rear fall supports hot-dip galvanized * the axles, springs, support winch, air tank painted in a black tone * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading edge unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer warranty * Errors and prior sale subject to reservation Cgobu Tfreq Euaroyjt * available immediately from Egestorf on the A7

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * including 2 ratchet tensioning cables permanently mounted on the outer frame with chain case * on both sides with eyelet and quick shortener in Y-special design 6.3 ton * clamping force with Lasi certificate * Wabco EBS * RDÜ tire control monitoring system * emergency release device for spring-loaded cylinders * drum brakes Cgjbu Tepk D D Rofryjt * 2 x 7 ton Gigant axles * parabolic springs with compensation unit * Jost support winch at the front * 2 x external drop supports at the rear * height-adjustable +/- 150 mm hot-dip galvanized drawbar * hot-dip galvanized chassis * 15-pin power plug * multi-chamber tail lights * closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with swinging stop that can be plugged into 4 positions, * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available from week 20/2025

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Wabco EBS * RDÜ tire control system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensation unit Cjbu Tfrjl Th Hzsyogt * Jost support winch at the front, 2 x external support legs at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis15-pin power plug * Multi-chamber tail lights * Closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with pendulum stop that can be plugged into 4 positions * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to reservation * New vehicle with manufacturer's warranty * Available immediately from week 20/2025 * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Wabco EBS * RDÜ tire control system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensation unit * Jost support winch at the front, 2 x external support legs at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis15-pin power plug * Multi-chamber tail lights * Closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways Cgebol Thyqsu Tfryjt * Trough stops at the front with pendulum stop that can be plugged into 4 positions * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to reservation * New vehicle with manufacturer's warranty * Available immediately from week 20/2025 * Sample images

Condition: new, overall weight: 18,000 kg, maximum load weight: 14,000 kg, axle configuration: 2 axles, loading space length: 7,120 mm, loading space width: 2,470 mm, Year of construction: 2023, * TM 2 18.0: (for 2 skips) * EBS (electrical braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection * 2 x 10 ton BPW axles * Air suspension with automatic lowering when the brake is uncoupled * Pneumatically lowering drawbar with pneumatic release * 2,100 mm long drawbar with 40 mm drawbar eyelet and height adjustment via tension spring & turnbuckle * 2 x 7-pin power plugs * Multi-chamber tail lights * Closed. side impact protection as advertising space (painted in RAL 3002 carmine red) * Plastic toolbox approx. 858 x 500 x 500 mm rear right * Storage box for cont. nets made of galvanized perforated sheet metal approx. 1,000 x 500 x 500 mm side left * Foldable parking warning sign, reflective, rear left * Foldable underrun protection * Plastic fender * Waterproof glued 30 mm screen-printed floor * Front cross member with 2 fixed trough stops * 8 removable trough stops for laterally centering the troughs * 2 sliding sheet supports approx. 750 x 1,000 mm * Trough stops at the front and rear with swinging stop (permanently welded at the front, adjustable lengthwise at the rear for 2nd trough) * 4 ratchet tensioning cables permanently mounted on the outer frame with chain case, compensation chain with eyelet on both sides and a quick shortener in Y-special design (clamping force 6,300 kg), with Dekra LaSi certificate * Loading height approx. 1,030 mm +/- 20 mm tolerance due to the air suspension chassis, * Underrun protection hot-dip galvanized * Bogie, axles, air tank and pull scissors painted in a black tone * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer warranty Cjbol Tpbpeu Tfryogt * Errors and prior sale subject to reservation * Available immediately from Egestorf on the A7

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,250 kg, axle configuration: > 3 axles, Year of construction: 2025, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board for load weight determination * Warning sign packages front and rear * Reflective contour strips on the sides and rear * Rotating beacon (removable) at the rear * LED light * Straight towing hook with 50 mm towing eye and continuously adjustable height * Powder-coated sheet steel toolbox and basket-style spare tire holder on the right side * Front closed Plastic single fenders * Straight steel mudguards at the rear, each with splash guards (spray suppression) * Side impact protection * Front end of the bogie platform extended by 520 mm with 45° corners and 3 recessed storage compartments including a lid, and lockable * Chassis made of high-strength fine-grain steel * Floor above the bogie platform made of 50 mm and in the low-loader platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes provided) with simultaneous 2-ton lashing option * Lasi package consisting of: 2 6.4-ton lashing eyes at the front left and right on the main frame of the bogie platform * 2 pairs of 13.4-ton lashing rings on the outer frame at the front and rear, and 4 pairs of 10-ton lashing rings on each side. Can be pivoted and lowered * Load-bearing capacity in all directions and embedded in the outer frame * 2 pairs of 6.4-ton lashing rings mounted on the side of the excavator boom rest * 8 pairs of galvanized folding booms for a total width of 3 meters (but not in the rear slope) * Widening planks stored in a storage compartment on the left side * Excavator boom rest above the rear axle to the end of the approach slope, approx. 2,100 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic folding ramps with hydraulically extendable tip section, approx. 4,650 x 720 mm, including hydraulic lateral ramp adjustment and load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (max.) Approx. 890 mm, +/- 20 mm (including 860 mm approach slope) * Flow divider installed * Chassis, bogie, loading ramps, folding boom, and mechanical drop supports hot-dip galvanized * Axles, drawbar linkage, air chamber, and turntable painted in a single black tone * Tires 235/75 R 17.5 Cgebu Tfel Tphreryot * New vehicle, not first registered, with manufacturer's warranty * Errors and prior sale subject to change * Available from week 20/2025

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,250 kg, axle configuration: > 3 axles, Year of construction: 2025, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board for load weight determination * Warning sign packages front and rear * Reflective contour strips on the sides and rear * Rotating beacon (removable) at the rear * LED light * Straight towing hook with 50 mm towing eye and continuously adjustable height * Powder-coated sheet steel toolbox and basket-style spare tire holder on the right side * Front closed Plastic single fenders * Straight steel mudguards at the rear, each with splash guards (spray suppression) * Side impact protection * Front end of the bogie platform extended by 520 mm with 45° corners and 3 recessed storage compartments including a lid, and lockable * Chassis made of high-strength fine-grain steel * Floor above the bogie platform made of 50 mm and in the low-loader platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes provided) with simultaneous 2-ton lashing option * Lasi package consisting of: 2 6.4-ton lashing eyes at the front left and right on the main frame of the bogie platform * 2 pairs of 13.4-ton lashing rings on the outer frame at the front and rear, and 4 pairs of 10-ton lashing rings on each side. Can be pivoted and lowered * Load-bearing capacity in all directions and embedded in the outer frame * 2 pairs of 6.4-ton lashing rings mounted on the side of the excavator boom rest * 8 pairs of galvanized folding booms for a total width of 3 meters (but not in the rear slope) * Widening planks stored in a storage compartment on the left side * Excavator boom rest above the rear axle to the end of the approach slope, approx. 2,100 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic folding ramps with hydraulically extendable tip section, approx. 4,650 x 720 mm, including hydraulic lateral ramp adjustment and load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (max.) Approx. 890 mm, +/- 20 mm (including 860 mm approach slope) * Flow divider installed * Chassis, bogie, loading ramps, folding boom, and mechanical drop supports hot-dip galvanized * Axles, drawbar linkage, air chamber, and turntable painted in a single black tone * Tires 235/75 R 17.5 * New vehicle, not first registered, with manufacturer's warranty * Errors and prior sale subject to change * Available from week 20/2025 Cgsbu Tsl Tik Njfryot