Used Müller-Mitteltal Concrete Mixer Semitrailers for sale (250)

Condition: used, maximum load weight: 7,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/2007, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Vehicle / Body: Tandem three-way tipper First registration: 07/07 Gross weight: 10,000 kg Unladen weight: 2,900 kg Payload: 7,100 kg Overall length: 6,900 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Additional information - 40 km/h - 500 mm side walls - 500 mm galvanized front extension - 7 pairs of lashing rings on loading area - 4 pairs of lashing rings on exterior underbody - Support leg - Rear support - Drop side lifting spring Iaodpfx Aaoyz H Azs Hsr - Drive-on ramps optional at €1,280.00

Condition: used, maximum load weight: 7,000 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 09/1999, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Gross weight: 10,000 kg Unladen weight: 2,000 kg Payload: 7,000 kg Overall length: 6,900 mm Iajdpfx Ajyz H A Isa Hor Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Further information - 40 km/h - 500 mm side walls - 500 mm galvanized front extension - 8 pairs of lashing rings on the loading area - 4 pairs of lashing rings under the body on the outside - BPW axles - support leg - side wall lifting spring - access ramps optional: €1,280.00

Condition: excellent (used), axle configuration: 3 axles, Year of construction: 2016, T3 Profile 30, 0: Drum brakes, 3 x 10 t axles, lateral underrun protection, swivel supports on the rear chassis frame, mechanically adjustable warning sign packages at front and rear, hinged lid to the toolbox on the bogie platform, 4 lashing rings on each side, 6 pairs of mechanical folding outrigger supports for a total width of 3 m, widening planks stored in the center of the loading area, hydraulically operated, 2-part approach ramps, laterally movable, loading area above the slewing ring: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm access slope), technically possible total permissible weight: 30,000 kg, vehicle is hot-dip galvanized and in as-new condition. = Further information = Weights Payload: 24,000 kg gross vehicle weight: 6,000 kg Service life, history, and condition Number of owners: 1 Technical condition: very good Optical condition: very good Further details Tyre condition front: 90% Tyre condition rear: 90% Tyres front: 235/75 R 17.5 Iaedpfx Ajyz Ix Rea Hor Tyres rear: 235/75 R 17.5 Cargo space dimensions (LxWxH): 8,500 x 3,000 x 3,000 mm Country of manufacture: DE Further information Please contact Bernd Strack for more information.

Condition: new, maximum load weight: 6,810 kg, overall weight: 9,600 kg, axle configuration: 1 axle, loading space length: 4,030 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Draw-eye: * Drawbar as central pole with 40 mm bolted towing eye * Continuously adjustable drawbar height with spindle lift element instead of a fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no vehicle-side installation required * 15-pin power connector * LED tail lights * Flashing side marker lights ----General Add-on Parts: * Front landing gear * Enclosed plastic mudguards * Folding underride guard for road paver ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Pallet-3-way tipper body * 700 mm steel front wall * Asymmetric, continuous aluminum side walls without central stanchion – foldable with long-travel locks and pendulum action via manual central locking * 800 mm high steel rear wall with automatic rear wall opening when tipping backwards * 4 mm Hardox 450 steel floor ----Load Securing: * 2 pairs per side of 3-ton lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, and underride guard hot-dip galvanized Iodpfx Ajw Ndr Uja Hear * Tipper body painted in RAL 9010 pure white ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 25/2026

Condition: used, maximum load weight: 39,500 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 09/2010, next inspection (TÜV): 12/2026, loading space length: 9,345 mm, Year of construction: 2010, Errors excepted. Ijdpfx Aajyzlyxj Hoar All prices listed on classifieds platforms are gross prices and already include the statutory VAT of 19%.

Condition: used, empty load weight: 9,300 kg, maximum load weight: 14,700 kg, first registration: 02/2001, next inspection (TÜV): 10/2024, total width: 25,500 mm, suspension: steel, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 24,000 kg,

Condition: used, empty load weight: 5,750 kg, maximum load weight: 24,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/1993, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Iedoyvlk Hopfx Aa Hsar

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Iodpfx Aoyu Uuksa Hear

Condition: new, maximum load weight: 31,900 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal – no installation required on the truck side * SmartBoard as an infotool with pressure sensors for axle load display by axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at rear ----General Attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized and powder-coated sheet steel approx. 650 x 300 x 600 mm, mounted on right side * Enclosed single plastic mudguards at the front * Straight rear steel mud aprons, each with spray protection (spray suppression) * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lockable lids * Flooring above gooseneck platform: 50 mm; in low bed: 60 mm softwood * 20 mm rubber covering instead of wooden floor in running area, with a depressed bed length of 6,780 mm including the drive-on slope * Rubber covering on the drive-on slope left and right approx. 860 mm long * 4 stake pockets per side (stakes not included), each with 2 t lashing capacity ----Chassis: * Chassis made of high-tensile fine-grained steel ----Load Securing (Lasi Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame Low Bed: * 4 pairs of 10 t folding lashing rings per side on the outer frame, loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber covering on the folding drive-on ramps * Hydraulic folding ramps with hydraulically extendable end section, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment and load-holding valves ----Rear Support: * Hydraulic rear support ----Widenings: * 8 pairs of galvanized folding outriggers for 3 m total width (not in the rear slope area) * Extension boards stored on the left side in a storage compartment ----Excavator Arm Tray: * Excavator arm tray above the rear axle up to the end of the drive-on slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm tray ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm drive-on slope) * Loading area above the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape on sides and rear * Chassis, gooseneck, drive-on ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Example images may include special equipment Iedpfx Aajylfvmj Hjar ----Delivery Time: * Vehicle available from approx. calendar week 23/2026

Condition: new, maximum load weight: 31,900 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting ----Electrical / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load indication by axle group * 15-pin power connector * LED tail lights * Removable LED beacon at the rear ----General Attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized and powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed plastic single mudguards * Rear straight steel splash guards each with spray suppression * Side underrun protection ----Low-loader Platform: * Rotary-platform extension by 520 mm with 45° corners and 3 integrated storage compartments incl. lockable covers * Flooring over rotary-platform from 50 mm and on low-loader platform from 60 mm softwood * 20 mm rubber flooring instead of timber in the deck area, low-loader length 6,780 mm including access ramp * Rubber flooring on upper access slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes included), 2 t lashing option per pocket ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lashing Package): Rotary-platform: * 2 pairs 13.4 t lashing rings in the outer frame of the rotary-platform Low-bed: * Each side with 4 pairs 10 t retractable lashing rings on the outer frame, loadable in all directions * Each side rear with 2 pairs 13.4 t swing-away lashing rings ----Ramps: * Rubber surfacing on foldable loading ramps * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs galvanized folding outriggers for 3 m overall width (not on rear ramp slope) * Extension planks stored in compartment on left side ----Excavator Arm Rest: * Excavator arm rest above rear axle to end of ramp, approx. L=2,100 mm x W=740 mm x H=190 mm * 2 pairs 6.4 t lashing rings on side of excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 up to max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) Iajdpfxoylfvge Aa Hjr * Area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded: approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour markings on sides and rear * Chassis, rotary-platform, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show special equipment ----Delivery time: * Vehicle available from approx. week 23/2026

Condition: used, empty load weight: 6,200 kg, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2006, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Iaodsyurvrjpfx Aa Hor

Condition: new, Year of construction: 2026, New model, now with a total weight of 9,900 kg! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum either from the towing vehicle or using a separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover, hydraulic drum drive with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tire pressure monitoring. 40 mm height-adjustable drawbar eye, two-line air, LED lighting 12+24 V. Toolbox, advertising panels in the side underrun protection. Vehicle fully hot-dip galvanized. New vehicle incl. factory warranty. Available from approx. CW 26-2026. (Archive photos) = Further information = Unladen weight: 2,900 kg Payload: 7,000 kg total weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: Germany Please contact Jan-Marc Schwickert for further information. Iajdpfxeyyhb Ne Aa Her

Condition: used, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2019, Equipment: ABS, * Müller Mitteltal 3-axle trailer for demountable containers * Model TM 2 24 * For two demountable containers from 7 to 10 m³ * Load securing with only two chains per container * Twin tyres 265/70 R19.5 * Air suspension * BPW axles * Turntable drawbar pneumatically lowerable with pneumatic release * 8 UVV lashing rings (5t) for attaching tensioning elements * 8 adjustable container stops for lateral centering of containers * EBS * Technically permissible gross weight 27,000 kg Isdpfsyx R Ensx Aa Hsar

Condition: used, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2021, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75 R17.5, Year of construction: 2021, Equipment: ABS, German Vehicle MASTERLINE Müller-Mitteltal KA-TA-R 11.9 Three-Way Tipper with Underfloor Ramps First registration: 05/2021 Galvanized Gross weight: 11,900 kg Tare weight: 3,210 kg Payload: 8,690 kg Tire size: 235/75 R 17.5 Tandem axle distance less than 1 m Continuously height-adjustable drawbar, hot-dip galvanized, 40 mm towing eye Frame galvanized BPW axles Floor height: 0.93 m Additional services available! Export license plates (Red / 30 days) Germany Temporary license plates (Yellow / 5 days) Germany Transfer license plates for Austria can be arranged Vehicle delivery (for a fee) The information provided on the Internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to prior sale. Iedpfeyxbgcex Aa Hear Sale only to commercial customers. Our general terms and conditions apply exclusively.

Condition: new, maximum load weight: 8,770 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, Equipment: ABS, tail-lift, * Müller Mitteltal ETÜ-TA-R 11.9 Low Loader / Tandem Trailer with Ramps * NEW TRAILER without first registration * Available mid/end of May ’26 in RAL 7016 Anthracite Reference number for inquiries: 30504 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL, including load securing certificate * 6.27 m x 2.47 m x 0.4 m laser-welded steel drop sides with 2 spring lifts, foldable * Bolted front wall made of smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps, with empty holder behind the front wall Iodpeyxbdbefx Aa Hoar * Bolted rear stanchions (hot-dip galvanized) * 50 mm thick softwood floor * 4 UVV-compliant lashing rings LC 6300daN, recessed at front and rear in cross members * 10 UVV-compliant lashing brackets LC 3000daN, recessed into existing hole pattern in outer frame * Ramps: one-piece, with hot-dip galvanized grating, slip-resistant design * Prepared in front of front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 rotatable LED beacon (warning) removable, with holder and wiring included ---- * Trade-in possible * Financing available via our partners with or without down payment or final installment; various terms available – request your personal offer! ---- * Example lease-purchase offer from our partner FM LeasingPartner: €475 per month net for 60 months with no down payment and €0 final installment. Other terms/durations with or without down payment/final installment available – just ask! We are an official Müller Mitteltal dealer! ---- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, visits available by appointment * We speak German, English, Arabic, Polish, and French

Condition: used, maximum load weight: 13,640 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2019, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, total width: 2,500 mm, HU: NEW Iasdsyw Ep Sopfx Aa Hjr Gross weight: 18,000 kg/20,000 kg Unladen weight: 4,360 kg Payload: 13,640 kg/15,640 kg Additional information - Twin tyres 235/75R17.5 - Gigant axles - 4 pairs of lashing rings - Pneumatic locking - Lowerable turntable chassis - Loading ramps approx. 2,300 mm in storage compartment - Rear support leg - Storage box - Underrun protection

Condition: used, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2021, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75 R17.5, Year of construction: 2021, Equipment: ABS, German Vehicle MASTERLINE Müller-Mitteltal KA-TA-R 11.9 Three-Way Tipper with Underfloor Ramps First registration: 05/2021 Galvanized Gross weight: 11,900 kg Tare weight: 3,210 kg Iaodpeyw N Npjfx Aa Her Payload: 8,690 kg Tire size: 235/75 R 17.5 Tandem axle distance less than 1 m Continuously height-adjustable drawbar, hot-dip galvanized, 40 mm towing eye Frame galvanized BPW axles Floor height: 0.93 m Additional services available! Export license plates (Red / 30 days) Germany Temporary license plates (Yellow / 5 days) Germany Transfer license plates for Austria can be arranged Vehicle delivery (for a fee) The information provided on the Internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to prior sale. Sale only to commercial customers. Our general terms and conditions apply exclusively.

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * 3 in 1 = for hooklift containers, skip containers, and as a low-loader ----Brakes: * Tire Pressure Monitoring System (RDÜ) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length * 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * LED tail lights * 15-pin power connector * Tire Pressure Monitoring (RDÜ), can be displayed in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Tool box made of powder-coated steel sheet, right side * Side underride guard * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact bumpers * Mechanical drop-down rear supports ----Loading area: * Hot-dip galvanized main frame with raised outer frame (~25 mm) for guiding roll-off containers * Steel floor with recessed roller areas in the bogie zone * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically lockable adjustable front stops in the track, cargo securing certificate compliant with DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * 8 relocatable trough stops for lateral centring, front 4 stops with pendulum adjustable stops * Weld bead as anti-slip coating in the ramp track area ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the containers * 4 cloverleaf-type lashing eyes per side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) Iasdpfxol Thwcj Aa Her ----Notes: * Cargo securing certificate in accordance with DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brake System: * EBS (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with positive-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front Ijdpevin Ucofx Aa Hjar * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Steel pallet - 3-way tipper body made from high-tensile steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls - without central post - foldable with drop side spring assist and pendulum action via manual central locking * Screw-on rear stanchions * Combined steel swing doors - 2-wing asymmetrical rear doors, can pivot 270° and be locked (not foldable) with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanized rotary latch and central locking, deactivation function for automatic tailgate opening when tipping backwards with open swing door * 4 mm steel floor plate * Two-stage step in front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t lashing rings each side, recessed into outer frame ----Loading Ramps: * Recessed ramp storage compartment in rear chassis * 1 pair aluminium access ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun guard, and rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted RAL 9010 pure white * Optional paint for side walls in any RAL color is available at extra cost * Axles, air tank, flange towing eye, and front landing gear painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Errors and interim sale excepted * Sample photos (actual vehicle may differ due to special equipment) ----Delivery time: * Available from week 15 / 2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * TPMS (tire pressure monitoring system) * EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic leaf springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * Tire pressure monitoring system (TPMS), display available in the truck via EBS signal (no truck-side installation required) ----General Fittings: Iajdpfol Thv Rjx Aa Hjr * Tool box made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact protection buffer * Mechanical drop-down supports at the rear ----Cargo Bed: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller indentations in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock as well as mechanically pluggable end stops at the front of the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 relocatable skip stops for lateral centering, front 4 skip stops installed with pendulant end stop * Weld bead as anti-slip coating in the ramp area of the track ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and frictional securing of skips * 4 lashing brackets per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes Isdpfxexmpyds Aa Hear * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11-ton Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (the steering lock for the trailing axle can be activated from the cab for maneuvering purposes without truck-side installation, as well as additionally by a switch on the trailer); the lock must be deactivated before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent activation via EBS electronics ----Suspension: * Air suspension with lifting and lowering system, equipped with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye, manual height adjustment ----Electrical / Lighting: * Smartboard info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Fittings: * Mechanical warning sign package for 3 m overall width * Toolbox, galvanized steel, approx. 650 x 300 x 600 mm, mounted left side * Front plastic fenders and galvanized steel rear mudguards ----Low-loader Area: * Front of turntable platform with 45° corners and 3 storage compartments with lockable flaps (flap opens to rear) * Shortened low-bed platform by 500 mm to 6,280 mm including extended stepped drop by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and platform running surface * Bamboo wood insert between longitudinal members in front of excavator stick rest ----Load Securing (Load Securing Package): * 2 x 6.4 t lashing rings at the front corners * On each side, front and rear corners, 2 x 13.4 t UVV-compliant lashing rings * 5 x 10 t UVV-compliant lashing rings per side (pivotable, retractable, loadable in all directions) * 4 side stake pockets per side with 2 t lashing capability * 1 x 16 t UVV lashing ring on rear crossmember ----Widening: * Extendable and foldable outriggers for up to 3 m overall width (plank holders under chassis on right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforced profile from last axle to rear crossmember, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and adjustable ramp tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulic System: Iedpol Tihusfx Aa Hoar * Hydraulic flow divider (for hydraulic pump flow on truck from over 40 l/min up to 140 l/min max.) ----Loading Height: * Loaded: 890 mm +/- 20 mm by air suspension ----Loading Platform Dimensions: * Platform above fifth wheel: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on ramp ----Paintwork: * Chassis, turntable, drawbar, widening consoles, drive-on ramps – hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately *

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve Iajdjxptn Djpfx Aa Hjr ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front and rear * SmartBord infotool installed with pressure sensors for displaying total axle load per axle group * Reflective contour tape on the sides and rear * Removable LED rotating beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Rear straight steel mud flaps each with splash guards (spray suppression) * Side underrun protection * Front extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable hinged covers (covers open to the rear) * Chassis made of high strength fine-grain steel * Floor over bogie platform made of 50 mm softwood and 60 mm on the lowbed platform * Outer planks of the loading ramps made of 50 mm hardwood * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, side front and rear each 1 pair of 13.4 t lashing rings on the outer frame, and side each 1 pair of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame, bolted 5 t lashing rings to the outer frames of the wheel wells (2 at the front wheel well and 1 at the rear), 2 pairs of 6.4 t lashing rings at the side in the excavator arm rest * 11 pairs of folding outriggers for 3 m total width (except on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening planks made of steel sheet, mounted transversely to the loading platform in front of the 1st rear axle * Excavator arm rest above the rear axle to the end of the drive-up slope, approx. 2,300 x 740 x 190 mm * Each side with 2 wheel wells approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding covers (storage for the covers on the front of the bogie platform) for the transport of wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm drive-up slope) * Chassis, bogie, folding outriggers, rear drop supports and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tires: 235/75R17.5 Iodpfsxmpykox Aa Hear * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and interim sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including ride height control valve (RtR-valve) and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive lock height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underrun protection ----General Attachments: * Landing gear at the front * Outward folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet - 3-way tipper body made of fine-grained steel, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls - without center stanchion - folding with drop-side spring-assisted lifter and pivoted by manual central locking * Bolted rear stanchions * Combination steel swing doors - rear panel, 2-wing asymmetric design, can be swiveled and locked at 270°, not foldable, with additional swing frame for automatic tailgate opening during tipping operations; locking via galvanized rotary bar lock and central locking; deactivation function for automatic tailgate during rearward tipping with open swing door * 4 mm steel floor * Two-step access on front left * Mounting rail at the rear for loading ramps ----Load Securing: Ijdpfjvin T Ssx Aa Hear * Each corner fitted with 1 x 7 t lashing point * 4 x 3 t lashing rings recessed in the outer frame on each side ----Loading Ramps: * Ramp storage compartment rear integrated in chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Painting: * Chassis, drawbar, rear stanchions, front wall, tipping body, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL coated - and tailgate painted in RAL 9010 pure white * Side wall painting in another RAL colour available at extra cost * Axles, air tanks, flange drawbar eye, front landing gear painted in a black shade ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and prior sale excepted * Sample images (pictures may vary due to special equipment) ----Delivery Time: * Available from week 15 / 2026