Used Müller-Mitteltal Tipper Trailers for sale (255)

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Stainless steel toolbox, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection Kwsdpfx Ajx Nli Nofnou ----Platform: * Zurr-fix outer frame, 45° bent with hole pattern for securing equipment, lashing force per point 2,000 kg at a distance of 480 mm * Possible installation of 3,000 kg drop lashing brackets at approx. 600 mm interval – includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side for posts, 100 x 50 mm, in the outer frame – posts are not included in delivery * 30 mm phenolic plywood flooring ----Drum Supports: * 3 galvanized drum supports, secured via container locks, with side forklift pockets spaced 800 mm center/center (pocket width 185 mm) * Maximum drum diameter: 2,600 mm, maximum drum width: 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross brace * Max. drum weight per drum stand: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 polyamide centering cones * 4 pcs. 3.2 t lashing eyes on the support arms for customer-provided securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame and rear underrun protection hot-dip galvanized * Axles painted in black tone ----Info: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available from week 28 / 2026

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General attachments: * Aluminium air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: Kwsdpfx Afjx Nlkajnou * Zurr-fix external frame, 45° angled, perforated for lashing devices, lashing capacity per lashing point 2,000 kg at a distance of 480 mm * Installation of 3,000 kg folding lashing rings at approx. 600 mm spacing possible - each side comes with 12 x 3,000 kg lashing rings supplied * Each side features 5 pockets for pipe stanchions 100 x 50 mm in the outer frame (pipe stanchions not included) * 30 mm phenolic resin-coated plywood floor ----Cable drum supports: * 3 galvanized cable drum supports, secured via container locks with side forklift pockets centre-to-centre 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-brace * Max. drum weight per support: 6,000 kg * Without drive or drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 retaining collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms to secure the drum against unintentional rotation and unwinding (provided by customer) ----Loading height: * approx. 1,040 mm loaded ----Paintwork/finish: * Chassis, turntable, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck display via EBS signal - no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° angled with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals possible - each side is supplied with 12 pcs. 3,000 kg lashing brackets * Each side has 5 pockets for pipe stanchions 100 x 50 mm in the outer frame - stanchions are not included in the scope of delivery * 30 mm phenolic plywood floor ----Drum supports: * 3 galvanized drum supports, secured with container locks and side forklift pockets (center/center 800 mm, pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Maximum drum weight per cable rack: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft 76 mm diameter with centering and rotatable ends * 2 collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Approx. 1,040 mm under load ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun guard hot-dip galvanized * Axles painted in black tone Ksdpfx Asx Nlkgjfnowu ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from calendar week 28/2026

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Plastic toolbox 450 x 470 mm mounted on the right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front and rear * Enclosed side underrun protection suitable for advertising * Rear underrun protection * Plastic rear impact buffers * Rear hazardous goods sign * 15-pin electrical connector * LED tail lights * Roller bed length approx. 6,830 mm * Pneumatic 4-point clamping lock Kodpfxov Nulze Afnowu * Mechanically adjustable end stops (2 positions) front left and right on the running rails * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * --Technically permissible total weight of 20,000 kg-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air reservoirs, axles, turntable and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2025, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR (Raise-the-Roof) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Lowbed Area: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium drop sides (RAL 9010 pure white) on the sides of the saddle platform, foldable and removable * Rear wall inserted, 150 mm high * Rear incline on the saddle platform to the lowbed, approx. 700 mm long * Saddle platform with 50 mm timber planks and lowbed platform with 60 mm timber planks * Tread plate above the axles ----Extensions: * 8 x mechanical fold-out extensions up to a total width of 3 m, not on the rear incline (extension planks available and stored on the saddle platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing rods on each side of the external frame * On the lowbed platform: 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, swingable and lowerable, embedded in the external frame * On each side: 2 x 6.4 t lashing eyes, and 1 lashing ring at the excavator stick recess at the rear * 2 x container locks directly after the step in the lowbed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last fixed axle, over the steering axle, up to the rear cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach incline ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity from over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading surface of the saddle platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach incline) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening adapters hot-dip galvanized * Axles, support winches, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offered vehicle Kjdpfx Afsl Tnvgsnswu ----Delivery Time: * Available from week

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General accessories: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted under the chassis on the right-hand side ----Lowbed platform: * Fifth wheel platform with 45° chamfered front corners and front-mounted tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with foldable lid * 400 mm high foldable and removable aluminium drop sides (RAL 9010 pure white) on the side of the fifth wheel platform * Removable rear panel, 150 mm high * Rear slope on the fifth wheel platform to the lowbed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical fold-out extensions for total width of 3 m (not on the rear slope; extension boards included with storage on the fifth wheel platform) Kwedpspk D I Asfx Afnju * Mechanically adjustable warning board kits front and rear ----Load securing (Lasi package): * On the fifth wheel platform, 2 x 6.3 t lash rings each, and 3 x 5 t lashing bars on the side in the outer frame * On the side of the lowbed platform, 2 x 13.4 t lashing rings each, plus 4 x 10 t pivoting and lowerable lashing rings embedded in the outer frame * On the side, 2 x 6.4 t lashing eyes each, and 1 lashing ring at the rear in the excavator boom rest * 2 x container locks directly after the drop in the lowbed platform ----Excavator boom rest: * Continuous excavator boom rest from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm ----Loading ramps: * Mechanical one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofitting of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 to 120 l/min) ----Loading dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, loading ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures may show equipment not included with the offered vehicle ----Delivery time: * Available from week 26/2026

Condition: used, axle configuration: 2 axles, first registration: 11/2006, total length: 7,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, color: other, Year of construction: 2006, = Additional options and accessories = Engine - Number of fuel tanks: 1 Superstructure - Capacity of the superstructure: 9 m3 (The total capacity of the superstructure.) - Material: steel - Superstructure construction year: 2006 = More information = General information Colour: Purple Applicable material: Concrete Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 10%; Tyre profile right: 20% Weights Empty weight: 7.920 kg Carrying capacity: 21.080 kg GVW: 29.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: Kwedpoycfuksfx Afnsu • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Inquiry number: 23185 Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low-bed three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload 8,750 kg. * Tyre pressure monitoring with display function via EBS signal in truck * EBS 24 Volt * Side marker lights with indicator function * LED lighting system for 12+24 Volt * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanized floor: 5m x 2.42m; 0.5m high laser-welded drop sides, swinging, folding, and removable * Prepared for possible later fitting of side wall extensions * Support cables for rear wall * Lockable compartment under tipping platform for loading ramp * Incl. aluminium ramps, 8t capacity, 3.57m long, stored in ramp compartment under the tipping body * Front wall hot-dip galvanized * 4 UVV lashing rings (LC 5000daN) at front and rear + 8 recessed and folding lashing rings (LC 3000daN) in the tipper floor (centered) * Continuously height-adjustable, hot-dip galvanized drawbar with 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * One plastic toolbox on the right side of the chassis frame * Access step in front of the front wall ---- We are Müller-Mitteltal trading partner ---- E.g., €520 net per month for 60 months, no down payment, no residual value. Offer from our financing partner FM LeasingPartner We will be happy to send you a non-binding quote. ----Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours by appointment. Ksdpoyh Sr Djfx Afnjwu We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Reference number for inquiries: 11599 * BRAND NEW VEHICLE now in stock and available immediately in Alsdorf * Versatile use: construction, landscaping, agriculture, and forestry – can be used as a tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4x), BPW Axles, Parabolic springs, Drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload: 8,750 kg * EBS Multi-voltage system for towing vehicles with 12 and 24 Volt electrics (e.g., agricultural and forestry vehicles) * Side marker lights with indicator actuation * LED lighting system for 12+24 Volt with 1x 15-pin connection cable and 1 additional connection cable as standard, 12 Volt 13-pin version with blank sockets for both electric plugs * Galvanized floor, 5m x 2.42m x 0.5m; side panels laser-welded, swinging, folding and removable, pre-configured for later retrofitting of side panel extensions * Lockable compartment under the tipping bridge for loading ramps * incl. aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * * We are an official Müller-Mitteltal dealer! Contact us for an offer! * e.g., €519 net per month for 60 months without down payment, zero final installment. Financing offered by our partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Kwjdpfx Asyhtwwefnsu Outside of business hours, appointments can be arranged by request. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: Kwedpfx Afotplv Tjnju * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear Kedpfx Afopk D Iijnowu ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device Kjdpfepk D Awjx Afnowu ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Inquiry number: 23185 Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low-bed three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload 8,750 kg. * Tyre pressure monitoring with display function via EBS signal in truck * EBS 24 Volt * Side marker lights with indicator function * LED lighting system for 12+24 Volt * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanized floor: 5m x 2.42m; 0.5m high laser-welded drop sides, swinging, folding, and removable * Prepared for possible later fitting of side wall extensions * Support cables for rear wall Kwodpfxoyg Tl Ee Afnou * Lockable compartment under tipping platform for loading ramp * Incl. aluminium ramps, 8t capacity, 3.57m long, stored in ramp compartment under the tipping body * Front wall hot-dip galvanized * 4 UVV lashing rings (LC 5000daN) at front and rear + 8 recessed and folding lashing rings (LC 3000daN) in the tipper floor (centered) * Continuously height-adjustable, hot-dip galvanized drawbar with 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * One plastic toolbox on the right side of the chassis frame * Access step in front of the front wall ---- We are Müller-Mitteltal trading partner ---- E.g., €520 net per month for 60 months, no down payment, no residual value. Offer from our financing partner FM LeasingPartner We will be happy to send you a non-binding quote. ----Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours by appointment. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking Kedpfx Aexb Ig Ssfnswu ? 12 lashing rings per side ? rear view camera ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires Kodpjxb Iglsfx Afnjwu ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Kedpfx Ajndpn Ssfnowu * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized, folding rear supports * Plastic toolbox mounted on the front right exterior of the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Pre-installed fittings for later mounting of 20" container locks front and rear * Bolted smooth sheet steel front wall * Trapezoidal profile steel sheet side walls, foldable with drop side spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front wall and rear wall * Complete vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to alteration and prior sale ----Delivery Time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: Kwodopk D Dqspfx Afnsu * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Side Extension Boards + Aluminium Ramps * Inquiry number 11532—immediately available from stock in Alsdorf * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m + 0.5m steel extensions, 3 sides swinging, foldable, and removable, painted with spring assist and central locking (locking mechanism galvanized) * Tipper floor galvanized * Two-step access in front of the front wall (galvanized) * Lockable compartment under tipping platform for loading ramps * Aluminium loading ramps, 8t per pair, 3.57m in length * 2 LED reversing lights at the rear * Chassis hot-dip galvanized * 4 UVV-rated lashing rings LC 5000 daN at front and rear + 8 foldable and recessed lashing eyes LC 3000 daN in the tipper floor (centered) * Side marker lights with indicator control * Continuously height-adjustable towing bar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), BPW axles, parabolic leaf springs * LED light system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring * We are an official Müller-Mitteltal dealer ---- * Hire-purchase example from our cooperation partner MMV Leasing: EUR 554 per month net for 60 months, with zero down payment and zero remaining value * Other terms with or without down payment / residual value possible ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, we are available by appointment. We speak German, English, Polish, and French. * WhatsApp Kwjdpownvt Asfx Afneu Leasing, financing, and trade-in available ----

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes Kjdpfxol Tn U Rj Afnowu * Automatic braking when opening the cross-bracing units * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, 1st axle liftable, ABS (anti-lock braking system), U-protection, supports Body: Liebherr concrete mixer type HTM 1004 approx. 10m³ 2x 10t BPW axles! Kwedpfoi Rk Axex Afnou Suitable hydraulics for engine power take-off on towing vehicle available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - . Kjdpfx Afev R Hmaonswu

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Kedpfx Afov S H Sfenswu Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, next inspection (TÜV): 02/2025, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel construction, 2 axles, turntable, leaf springs, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps Construction: 2-axle 3-way tipping trailer Gigant axles, drum brakes, frame hot-dip galvanized! Kodpowth Iijfx Afnewu Loading height approx. 1290mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 2,230 kg, maximum load weight: 3,770 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 02/1984, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 500 mm, suspension: steel, tire size: 10.5-20, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: 3-sided tipper trailer with towing jaw and brake connections (red, yellow) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kedeuxd Rpjpfx Afnswu - .

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, next inspection (TÜV): 08/2024, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfxjth Uavs Afnowu - .