Used Müller-Mitteltal Tipper Trailers for sale (242)

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Suspension: steel Fsdpfeuwvbqsx Afmspp Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg = More information = Suspension: leaf suspension Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2025, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with balancing unit * Drawbar adjustable in height by approx. 300 mm * BPW support winch * Mechanical drop-down supports at the rear * Plastic toolbox on the front right of the bulkhead * Side underrun protection * LED lighting Fpodpswyhzvefx Afmep * 50 mm softwood floor * In the corners in front of the bulkhead and the rear cross member, 1 x 6.3 t lashing point each; laterally, 2 x 6.3 t UVV-compliant lashing rings each set into the outer frame * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,350 x 870 mm (20 mm spacing between, ramps non-slidable) * Front wall, side walls, mudguards and drawbar hot-dip galvanized * Axles, springs, air tank, and front support winch painted black * New vehicle with full manufacturer's warranty * Errors and interim sale reserved * Immediately available from Egestorf

Condition: used, empty load weight: 3,370 kg, maximum load weight: 8,630 kg, first registration: 10/2011, next inspection (TÜV): 06/2024, total length: 9,600 mm, total width: 25,500 mm, total height: 10,500 mm, suspension: air, tire size: 235 / 75 R17.5 / 10mm, front tire size: 235 / 75 R17.5 / 10mm, operation weight: 12,000 kg,

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2012, loading space length: 6,770 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, container lock, twin tires, storage box Body: 2-axle turntable flatbed trailer with stanchions and TwistLock locks, TwistLock can be extended to 3m. 20t, drum brake, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Fodpfx Afot Uq D Tomepp Access ramp for 1.000,- EUR extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, maximum load weight: 13,720 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2005, next inspection (TÜV): 04/2026, loading space length: 5,200 mm, loading space width: 2,427 mm, loading space height: 970 mm, total width: 2,550 mm, total height: 2,580 mm, Equipment: ABS, Steel rims, air brakes, drum brakes, BPW axles, metal floor, used vehicle Vehicle no. 3234, ABS, EBS, BPW Eco-Plus axles with drum brakes, air suspension, tyres: 385/65 R 22.5, storage box, support leg, 50mm towing eye, aluminium side panels, metal loading floor, tipper internal dimensions LxWxH: 5,200 x 2,427 x 970 mm, unladen weight: 4,280 kg, permitted weight: 18,000 kg, first owner, errors and prior sale excepted. Fedpfxexrxqvs Afmjpp

Condition: used, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2010, next inspection (TÜV): 05/2025, loading space length: 7,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2010, Equipment: ABS, WhatsApp MÜLLER MITTELTAL RA18 trailer for roll-off containers with outer rollers 5,500 mm ? 7,000 mm, German trailer 2nd hand Technical data Suitable for roll containers with external castors in lengths 5,500-7,000 mm inside length for pushing on from the rear. Mass: Total weight 18,000 kg Unladen weight approx. 3100kg Payload in kg approx. 14,900kg Total length approx. 9,400mm Total width in mm 2,550 Tires 385/55R22.5? approx. 40-70% Equipment: ABS/EBS plug-in connection according to ISO 7638 (5- or 7-pole) Chassis Main frame, with raised outer frame for carrying the roll containers, hot-dip galvanized Container locking system: The roll container is secured at 4 points by 2 pneumatic transverse clamping units. After the container has been pushed on, the 4 securing claws are closed by actuating a valve and the container is braced against the chassis frame At the front, the container is additionally secured by 2 plug-in parts (with empty holder), which can be inserted in different positions in the track. 2x 9to BPW 420mm drum brake axles with air suspension unit Air suspension with lowering function Welded steel frame Brake system 2-line brake system according to EC regulation EBS DUOMATIC clutch head Spring-loaded parking brake Electrical system 24 Volt Multi-chamber lights 15-pin plug with connecting cable Lighting according to EC regulations Rims: Factory silver Underride protection aluminum profiles Wheel chocks with holder 1/2 shell plastic mudguards Tool box (approx. 800x300x500) Condition according to age and mileage! Fpedpfx Ajvg T Nyofmep Transfer possible for an extra charge All information without guarantee! Sale only to traders or EXPORT ! ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polski, Romania, Russia, English

Condition: used, axle configuration: > 3 axles, first registration: 04/2000, loading space length: 10,790 mm, loading space width: 2,500 mm, loading space height: 950 mm, total length: 14,790 mm, total width: 2,500 mm, suspension: steel, Year of construction: 2000, Additional information : Brand: MÜLLER MITTELTAL Model: TS4 Structure: low loader ( platform L=10790 mm / W=2500 mm / H=950 mm ) Year: 2000 Suspension: steel Brakes: drum Dimensions: L/W: 14790 mm / 2500 mm Masses: full/empty: 57000 kg / 11800 kg HYDRAULIC RAMPS / STEEL SUSPENSION / DRUM BRAKES Fpedpfxsuwu Ezs Afmop = More information = Suspension: leaf suspension Empty weight: 11.800 kg Carrying capacity: 45.200 kg GVW: 57.000 kg Please contact Andrei Somov, Mark Ševtšenko or Deniss Urmaker for more information

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2024, * ETS-TA-B 11.9: Fedpfx Afswyhzpsmopp * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles Fedpfxexb Ig Sj Afmepp All information subject to change / Prior sale reserved.

Condition: used, empty load weight: 2,380 kg, maximum load weight: 8,320 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 04/2016, next inspection (TÜV): 06/2026, loading space length: 5,030 mm, loading space width: 2,010 mm, loading space height: 325 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminium underrun protection, tool box, height-adjustable drawbar. Body: tandem low-bed trailer with mechanical loading ramps, galvanized access ramps, 2x BPW axle, drum brakes! Fodpfexqhltox Afmopp Loading height approx. 700 mm! Ramp length approx. 2200 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 13,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 18,000 kg Unladen weight: 4,250 kg Payload: 13,750 kg Overall length: 8,800 mm Loading length: 6,600 mm Width: overall width 2,550 mm / platform width 2,470 mm Loading height: approx. 1,000 mm Additional information - 800 mm side panels + fold-down tailgate - Front wall 1,200 mm Fjdpfx Afoxnvkfsmjpp - Underrun protection - Gigant axles - Twin tyres 235/75R17.5 - Air suspension - Rear ramp storage compartment - Quick lowering valve - Rail for ramps - 4 heavy-duty lashing points - 6 pairs of lashing rings

Condition: used, functionality: fully functional, machine/vehicle number: 3795, empty load weight: 2,650 kg, maximum load weight: 5,950 kg, overall weight: 8,600 kg, axle configuration: 1 axle, first registration: 05/1996, next inspection (TÜV): 03/2026, loading space length: 4,520 mm, loading space width: 2,200 mm, loading space height: 500 mm, tire size: 335/65R-18 142 G, color: blue, Year of construction: 1996, 1 used tandem trailer Müller-Mitteltal * Internal number: 3795 * First registration: 05/1996 Fpodeh Iviuepfx Afmjp * Unladen weight: 2,650 kg * Permissible total weight: 8,600 kg * Payload: 5,950 kg * Loading area: 4,520 x 2,200 x 500 mm * Tyres: 340/65 R 18 (approved for max. 40 km/h only) Leaf-sprung tandem flatbed trailer with 'SAF' axles, front support winch, stainless steel storage box, fire extinguisher box, one-piece side panel, air brake system with drum brakes. Currently, the trailer is fitted with tyres approved for a maximum speed of 40 km/h. However, the trailer itself is approved for up to 80 km/h, as stated in the registration certificate.

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with equalizer unit * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Support winch at the front * External folding support legs at the rear * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Fixture in front of the bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of flat sheet metal * Bolted rear stanchions * Sideboards with spring-assist Fpjdpfx Asrwc R Aefmop * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; 1 x 6.3 t lashing ring in each front and rear corner; various drillings in front and rear cross-members for 1.2 t lashing points * Single-piece hydraulic grid ramp approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump capacity in the truck over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tank, front support winch, and flange-type towing eye painted in black * Sideboards painted in RAL 9010 pure white * Side wall painting in an RAL color tone available at extra cost * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately from Egestorf

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye Fodpfx Afsxb Iglemopp ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: 3782, empty load weight: 3,050 kg, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,272 mm, loading space width: 2,550 mm, loading space height: 350 mm, wheelbase: 990 mm, color: red, Year of construction: 2021, 1 used tandem trailer Müller-Mitteltal * Internal number: 3782 Fpodpfx Aexnmm Djfmjp * First registration: 05/2021 * Unladen weight: 3,050 kg * Permissible total weight: 11,900 kg * Payload: 8,850 kg * Loading area: 6,272 x 2,550 x 350 mm * Tyres: 235/75R17.5 143 J Maximum speed: 100 km/h Loading ramps included Support load: 1,000 kg Overall length: 8,368 mm Overall height: 1,400 mm Overall width: 2,550 mm Leaf-sprung tandem platform trailer, front support winch, storage box, one-piece drop side, air brake system with drum brakes.

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline * Wabco EBS * RDÜ tire pressure monitoring system * Multivoltage * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic tool box, right side * 15-pin electrical connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * Two-step entrance on the front left (in the direction of travel) * LED tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking housings as well as 2 on the front wall * Steel platform 3-way tipper body (continuous side walls – no center stanchions – drop sides with side wall spring lifts, tailgate both foldable and swinging via manual central locking) * 1 x 5 t lashing ring in each corner, as well as 4 x 3 t lashing eyes recessed into the outer frame on each side * 4 mm steel floor plate * Rear mounting rail for loading ramps * Body reinforced and certified according to EN 12642 XL cargo securing standard * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading area into the chassis * Chassis, drawbar, tipping body, front wall, side boards, folding supports, and rear stanchions hot-dip galvanized; axles, springs, air tanks, flange towing eye and landing gear painted black * Tires: 385/55 R 19.5 * New vehicle with manufacturer's warranty * Side boards hot-dip galvanized * Subject to errors and prior sale Fpodpsl Thw Ijfx Afmop * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with indication (display) in the truck via EBS signal—without any truck-side installation required * Support winch at front * Exterior foldable support struts at rear * 15-pin electrical plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Preparation at the front bulkhead for retrofitting container locks * Bolted 400 mm smooth sheet metal bulkhead * Bolted rear stanchions * Side walls with spring assist * Perforated outer frame, bent approx. 45° with 2 t lashing capacity every 480 mm, possible installation of 3 t drop lashing rings every 600 mm, in each front and rear corner 1 x 6.3 t lashing ring, various mounting holes in the front and rear crossmembers for 1.2 t lashing options * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and access ramps hot-dip galvanized Fedpfxjrwc R Re Afmjpp * Axles, springs, air tanks, front support winch, and flange draw eye painted in black * Side wall painting in RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at an extra charge * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS (Electronic Braking System) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Adjustable drawbar, galvanized, with 300 mm height adjustment and 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical galvanized folding rear supports * 15-pin electrical connector * LED tail lights * Galvanized, bolted underrun protection * Galvanized steel toolbox, mounted on the right side * Plastic quarter mudguards * Galvanized chassis * Steel platform body - 3-way tipper * Continuous drop sides with upper internal tubular reinforcement, no center posts, foldable with side wall spring lifter * Rear flap foldable and swinging, with manual central locking * Galvanized, bolted rear stanchions * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing rings each side, integrated into the outer frame * 4 mm fine-grained steel floor plate * Net hooks and rear ramp mounting rail * Prepared for later installation of side wall extensions * Body reinforced and certified for cargo securing according to EN 12642 XL * Two-step access on the left side * 1 pair of aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed under the loading area in the chassis Fpjdpfx Afel Th A Ejmep * Axles, springs, air tank, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle, unregistered, with manufacturer's warranty * Tire size: 385/55 R 22.5 * Side wall paintwork in RAL 9010 pure white * Optional side panel paintwork available in any RAL color for a surcharge * Errors and prior sale excepted * Available from calendar week ...

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, Fpedpjxptn Refx Afmep * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member Fsdjxptn Dopfx Afmjpp * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle liftable * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye & height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Contour marking tape, reflective on sides and rear Fpedpfxepk D Iio Afmjp * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with roll container recesses in turntable area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the guide rails * Load securing certificate according to DIN 30722-1 * Transport possible for up to 2 skip containers up to max. 10 m³ volume * Including 8 repositionable skip stoppers for lateral centering; front 4 skip stoppers plug-in with oscillating stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * Four cloverleaf-style lashing bars (side) and one pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the rolling path area of the approach ramp * Mechanical drop supports at the rear * 1 pair of aluminum drive-on ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Tires 235/75 R17.5 * Loaded height approx. 1,003 mm * Payload 18,900 kg * Technically permissible gross vehicle weight 27,000 kg * Axles, turntable, drawbar and air tanks painted in black * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Lifting center axle * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device * Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumpers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller depressions in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume each possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking * 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical rear support legs * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires: 235/75 R17.5 * Laden ride height: approx. 1003 mm * Payload: 18,900 kg Fsdpfx Afopk D Awjmepp * Technical gross vehicle weight: up to 27,000 kg * Axles, turntable, drawbar, and air tank painted black * New vehicle without initial registration, covered by manufacturer's warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support Fpjdpfx Afsl Tihuemep * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: new, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2025, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function as well as RtR valve * Traction assistance for shunting, activated on the first axle via EBS – without truck-side installation – with lifted lift axle + 30 mm driving height * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle activated from the cab for maneuvering purposes via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop-down supports and rear swivel supports on the chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Rear removable LED rotating beacon * 2 additional LED reversing lights * 2 LED work lights mounted laterally on the trailer (without truck-side installation) Fpedpjwh Hdxsfx Afmsp * 7-pin socket at the rear for oversize load lighting * Side marker lights with indicator control * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Mechanically adjustable warning sign packages front and rear * Straight steel mudguards * Semi-trailer platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with top hinged lid and side doors in the chamfered corners * 400 mm high aluminum side walls (RAL 9010 pure white) on the sides of the semi-trailer platform, foldable and removable * Rear panel inserted, height 150 mm * Rear slope on the semi-trailer platform to the low bed, approx. 700 mm long with anti-slip tread plate surface and a perforated strip at the end for hanging on aluminum loading ramps * Semi-trailer platform and low loader platform with 50 mm clamped timber floorboards * Checker plate above the axles * Prepared for 3 slots underneath the semi-trailer platform for storage of optional aluminum loading ramps * Swivel arm as support for connection lines from the truck to the trailer * Load securing package (LaSi): perforated outer frame on the semi-trailer platform with 45° edge and hole pattern for lashing equipment (2 t lashing capacity per point at minimum spacing of 480 mm), each side with 2 x 6.3 t recessed lashing rings in the floor, each side with 1 x 16.5 t lashing ring in the incline from the low loader platform to the semi-trailer platform, 2 pairs of 16.5 t lashing rings in the low loader platform (1 x on the longitudinal beams after the step, 1 x above the center axle beside the longitudinal beam), each side with 3 x 13.4 t lashing rings on the outer frame (1 x at start of the semi-trailer step, 1 x at start of loading ramp slope, 1 x at end of loading ramp slope), each side with 3 x 10 t lashing rings (2 x between front wheel recess and first axle, 1 x between second and third axle), each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 x at front, 1 x at rear wheel recess) * Extended excavator arm trough running from the end of the last fixed axle over the steering axle up to the rear crossmember, with internal reinforcement profile, approx. W = 770 mm x rear D = 270/front D = 170 mm, each side with 2 x 6.4 t lashing rings in the excavator arm trough * Each side with 2 wheel recesses, 390 mm deep and 640 mm wide, f