Müller-Mitteltal T3 Profi 30.0

Müller-Mitteltal T3 Profi 30,0

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) Nsdpsx Ipa Njfx Alqowf * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalizer at rear * Side underrun protection * Swivel support legs at the rear on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender skirts, each with splash guards * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can be used for load securing * Load-securing package consists of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings to the side in the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm Nsdpfxjx Ipave Alqswf * Load height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a shade of black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, maximum load weight: 17,290 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 07/2026, loading space length: 8,900 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS * 5-chamber tail lights * Orange rotating beacon * Duomatic air coupling * BPW ECO axles ----Superstructure: Low-bed trailer, galvanized frame (1900+7000mm)/loading height approx. 900mm, rear end sloped/loading ramp height approx. 770mm, steel/wooden floor, extendable to 3 meters, hydraulic drive-on ramps (galvanized) with anti-slip coating, ramps also hydraulically side-shiftable, lashing rings Nsdpfxoyulu Uj Alqjwf Sale only to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice for details).

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension * Mechanical rear axle equalization * Side underride protection Nwodpfx Ajx Ipbgolqjf * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels at front and rear * Front closed plastic mudguards and rear straight galvanized steel side skirts, each with spray protection * Reflective contour tape on sides and rear * Foldable lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant folding and lowerable lashing rings, loadable in all directions and recessed into the outer frame – in the corners: 13.4 t, otherwise 10 t. * 6 pairs of mechanical folding outriggers for a total width of 3 meters (not on the rear slopes) * Widening planks stored in the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical gross weight of up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf at the A7

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle Nwjdex Ipb Hopfx Alqsf * 15-pin electrical connector * Four stake pockets per side (no stakes provided), each also suitable as lashing points * Load securing package including: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame—13.4 t in corners, otherwise 10 t * 6 pairs of mechanical swing-out extensions for 3 m overall width (excluding the rear slope) * Widening boards stored in the center of the loading area * Excavator arm rest above rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Rear pivot supports on chassis frame * Mechanically adjustable warning panels front and rear * Front closed plastic fenders and rear straight galvanized steel splash guards, each with mudflaps * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Tow bar with 40 mm eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), each with simultaneous lashing option * Load securing package including: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform; 5 pairs UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into outer frame—rated 13.4 t at corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear tapered section) * Extension planks stored in center of load area * Digger stick tray above rear axle to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of tray) Njdpjl Th Adofx Alqowf * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting hydraulic ramp shift * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * —Permissible total weight technically up to 30,000 kg— * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 18/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Lateral underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel kits at front and rear * Front: closed plastic mudguards, rear: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (stakes not included), can also be used as lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant folding and lowering lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator stick trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator stick trough) * Hydraulically operated one-piece access ramps (approx. 3,000 x 720 mm) * 4-section control valve for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shifting * Load area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black Nedpfxsl Thxdj Alqjwf * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Available from week 18/2026