Used Müller-Mitteltal Semitrailers for sale (246)

Condition: used, empty load weight: 5,600 kg, maximum load weight: 12,400 kg, operation weight: 18,000 kg, first registration: 02/2012, next inspection (TÜV): 01/2025, suspension: air/air, tire size: 235 / 75 R 17.5 / 10mm, total width: 25,500 mm, front tire size: 235 / 75 R 17.5 / 10mm,

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, first registration: 06/2024, Year of construction: 2023, total width: 2,550 mm, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information New: No Kjdpfovy Tvtsx Ablonc

Condition: used, overall weight: 24,000 kg, maximum load weight: 18,200 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,500 mm, loading space height: 900 mm, first registration: 10/1993, Equipment: ABS, German trailer, Tyres: 215/75R17.5 141/140J, 70% good, Spring ramps, BPW axles, The trailer has been fully repaired and is ready for use. If interested, please call Christian Bredemeier. Knjdpfexhakvex Abljc

Condition: used, overall weight: 8,900 kg, maximum load weight: 6,600 kg, axle configuration: 2 axles, loading space volume: 5 m³, loading space length: 5,085 mm, loading space width: 2,415 mm, loading space height: 400 mm, first registration: 04/1994, total width: 2,500 mm, total height: 1,350 mm, Equipment: ABS, Drop-side body with steel side walls (mm), wooden plank floor, 5 lashing eyes per side, support winch(es), 2 rear folding supports, ABS, leaf suspension, height-adjustable drawbar, drum brake system. Vehicle may be fitted with advertising stickers and/or lettering. Kodpfx Abjxa S Eislsnc Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,390 kg, axle configuration: 3 axles, Year of construction: 2025, * TS 3 RM ML 30.0: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW axles * Air suspension with lifting and lowering system and RtR valve Knsdpfxjtpta De Ablsc * Starting aid for maneuvering purposes switched to the first axle via EBS (without installation on the truck side) * Smart board mounted on the trailer as an information tool with pressure sensors for displaying the total axle load * Last axle as a trailing steering axle with electro-pneumatic steering lock * Trailing axle locked by the driver. for maneuvering purposes switched via EBS (without truck-side installation) * 2nd kingpin position 2 * side impact protection, support winches at the front and swivel supports at the rear of the chassis * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket on the rear side for extra-long lighting * Side marker lights with indicator control * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * mech. adjustable warning sign packages at the front and rear * straight sheet steel mudguards * spare wheel holder in front of the bulkhead cross member (without spare wheel) * saddle platform with 45° bevelled front corners and front tool box made of galvanised powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminium side walls (in the desired RAL colour) on the side of the saddle platform, foldable and removable * rear wall -150 mm- high * rear slope on the saddle platform to the low bed approx. 700 mm long with checker plate covering and a perforated strip at the end for hanging aluminium docking ramps * saddle platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * tear plate over the axles * 9 x mechanical folding extensions to 3 mtr. Total width but not in the rear slope (widening planks available with closed storage compartment across the direction of travel under the loading area) * 3 slots under the saddle platform for storing optional aluminum ramps or wooden planks for wheel well cover * Swivel arm as a support for connecting cables from the truck to the trailer * LaSi package consisting of: outer frame perforated on the saddle platform, bent at 45° with hole pattern for lashing devices (2 tonnes lashing force per lashing point at a distance of at least 480 mm * 3 x 13.4 tonnes lashing rings sunk into the ground on each side (1 x on the saddle platform, 1 x on the longitudinal beams after the bend and 1 x above the middle axle next to the longitudinal beam) * 3 x 13.4 tonnes lashing rings on each side on the outer frame (1 x start of the saddle platform bend, 1 x start of the ramp, 1 x end of the ramp) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to the outer frame of the wheel recesses (2 on the front and 1 on the rear wheel recesses) * extended excavator boom support from the end of the last rigid axle over the steering axle to the end support with internal reinforcement profile approx. W = 770 mm x D rear = 270 / depth front 170 mm, 2 x 6.4 ton lashing rings on each side in the excavator boom support * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transporting wheel loaders with a wheelbase of 3,000 - 3,590 mm with a tire diam

Condition: used, overall weight: 18,000 kg, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Ksdpfsxgilmex Abljnc

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,830 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs Kjdpfx Abel Thxajljnc * Mechanical axle equalization at the rear * Side underrun protection * Swing-type support legs at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Side and rear contour markings, reflective * Folding lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), each with lashing points * Load securing package including: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t each * 6 pairs of mechanical folding outriggers for 3 m total width (not present at the rear slope) * Widening planks stored in the center of the loading area * Excavator stick trough from rear axle to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally * Loading area over the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross vehicle weight of up to 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Available from calendar week 38/2025

Condition: new, axle configuration: 1 axle, overall weight: 8,800 kg, maximum load weight: 5,840 kg, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs Kedsu I Iqxspfx Abljnc * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, axle configuration: 1 axle, overall weight: 8,800 kg, maximum load weight: 5,840 kg, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug Knedpfsu I Iqlsx Ablsc * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 8,800 kg, maximum load weight: 5,840 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends Knodpfou I Iq Eox Ablec * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,830 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical foldable outriggers for 3 m total width (not in the rear slope) * Widening planks stored in the center of the loading area * Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted on the sides) * One-piece hydraulic ramps (approx. 3,000 x 720 mm), adjustable laterally * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized Knodpfxol Th Adj Abljc * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from week 38/2025

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,390 kg, axle configuration: 3 axles, Year of construction: 2025, * TS 3 RM ML 30.0: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW axles * Air suspension with lifting and lowering system and RtR valve * Starting aid for maneuvering purposes switched to the first axle via EBS (without installation on the truck side) * Smart board mounted on the trailer as an information tool with pressure sensors for displaying the total axle load * Last axle as a trailing steering axle with electro-pneumatic steering lock * Trailing axle locked by the driver. for maneuvering purposes switched via EBS (without truck-side installation) * 2nd kingpin position 2 * side impact protection, support winches at the front and swivel supports at the rear of the chassis * 15-pin power plug * LED lighting 12 / 24 V Knsdpeq Euakefx Abloc * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket on the rear side for extra-long lighting * Side marker lights with indicator control * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * mech. adjustable warning sign packages at the front and rear * straight sheet steel mudguards * spare wheel holder in front of the bulkhead cross member (without spare wheel) * saddle platform with 45° bevelled front corners and front tool box made of galvanised powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminium side walls (in the desired RAL colour) on the side of the saddle platform, foldable and removable * rear wall -150 mm- high * rear slope on the saddle platform to the low bed approx. 700 mm long with checker plate covering and a perforated strip at the end for hanging aluminium docking ramps * saddle platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * tear plate over the axles * 9 x mechanical folding extensions to 3 mtr. Total width but not in the rear slope (widening planks available with closed storage compartment across the direction of travel under the loading area) * 3 slots under the saddle platform for storing optional aluminum ramps or wooden planks for wheel well cover * Swivel arm as a support for connecting cables from the truck to the trailer * LaSi package consisting of: outer frame perforated on the saddle platform, bent at 45° with hole pattern for lashing devices (2 tonnes lashing force per lashing point at a distance of at least 480 mm * 3 x 13.4 tonnes lashing rings sunk into the ground on each side (1 x on the saddle platform, 1 x on the longitudinal beams after the bend and 1 x above the middle axle next to the longitudinal beam) * 3 x 13.4 tonnes lashing rings on each side on the outer frame (1 x start of the saddle platform bend, 1 x start of the ramp, 1 x end of the ramp) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to the outer frame of the wheel recesses (2 on the front and 1 on the rear wheel recesses) * extended excavator boom support from the end of the last rigid axle over the steering axle to the end support with internal reinforcement profile approx. W = 770 mm x D rear = 270 / depth front 170 mm, 2 x 6.4 ton lashing rings on each side in the excavator boom support * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transporting wheel loaders with a wheelbase of 3,000 - 3,590 mm with a tire diam

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,830 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-type support legs at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Side and rear contour markings, reflective * Folding lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), each with lashing points * Load securing package including: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t each * 6 pairs of mechanical folding outriggers for 3 m total width (not present at the rear slope) * Widening planks stored in the center of the loading area * Excavator stick trough from rear axle to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally * Loading area over the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross vehicle weight of up to 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors Kjdpfx Absl Thxdolenc * Available from calendar week 38/2025

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * Tire pressure monitoring system (RDÜ) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer assembly * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead from smooth sheet metal * Side walls made from trapezoidal profiled steel sheet, foldable, with drop-side lifting assistance * Steel rear wall, can be inserted between ramps (storage bracket for when not in use inside at the front bulkhead) * Bolted rear posts * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each front and rear corner, various bores for 1.2 t lashing options in front and rear cross members * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * --Enhanced and certified body according to EN 12642 XL including load securing certificate-- * Drop-side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from KW 46 / 2025 Kjdpfxexglibs Abljnc * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) Knodpfoq Dyvvjx Ablsc * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation aggregate * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-equipment in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal profiled steel sheet, hinged with drop-side spring assist * Steel rear wall retractable between ramps – bracket for storage inside at the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t lashing rings every 600 mm possible; in each corner (front and rear) one 6.3 t lashing ring; various holes in the front bulkhead and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (retractable down to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Drop-side color in RAL 9010 pure white * Side wall painting available in any RAL color for an additional charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders Knjdpfx Abjxglh Relsc * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right-hand side of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting bracket for subsequent installation of container locks positioned in front of the bulkhead * Bolted smooth plate bulkhead * Side walls made of trapezoidal steel sheet, foldable with drop side spring assist * Steel rear wall, can be slid in between the ramps - bracket for storage inside in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm, option to install 3 t folding lashing rings every 600 mm, each front and rear corner with one 6.3 t lashing ring, various holes in the front and end crossmember for 1.2 t lashing points * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear access angle approx. 860 mm * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 46 / 2025 * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter fenders * Hot-dip galvanized chassis and drawbar * Front wall Ksdpsrvvfljfx Ablenc * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Provision for retrofitting container locks in front of the bulkhead * Bolted smooth sheet steel front wall * Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist * Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear entry ramp approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * New vehicle with manufacturer’s warranty * Errors and intermediate sale subject to change * Immediately available from Egestorf

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,700 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA 18.0: * 2-in-1: suitable for roll-off containers and as a low-loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10-ton axles * Air suspension with manual lowering at the rear * Drawbar length: 2,000 mm with 40 mm towing eye and adjustable height * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, plus spare wheel holder in a basket design on the right side * Reflective contour tape on sides and rear * Side underrun protection * Polymer quarter mudguards with spray suppression Knsdpfx Abol Tq Nmslec * Polymer rear impact bumpers * Folding A-sign at the rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer rails to guide the roll-off containers * Steel floor with wheel recesses in the bogie area * Container length possible: 5,500 – 7,000 mm * Pneumatic 4-point container locking system and mechanical removable end stops at the front in the guide rails, load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10 t UVV lashing rings at the front bulkhead and 3 pairs of 10 t UVV lashing rings on the sides of the outer frame; 4 x 2 t cloverleaf-type lashing eyes per side, and 4 x 8 t lashing brackets recessed in the outer frame * Weld bead as anti-slip coating in the inclined area of the loading ramp * Mechanical drop-down supports at the rear * 1 pair of aluminum drive-up ramps (10.6 t / pair), 2,800 x 470 mm, suitable for both rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air tanks painted black * New vehicle without initial registration, full manufacturer's warranty * Subject to prior sale and errors * Available from calendar week 46 / 2025

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,700 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA 18.0: * 2 in 1 – for roll-off containers and as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm as well as a spare wheel holder with basket design on the right side * Side and rear contour marking tape, reflective * Side underride protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable A-shaped rear plate * LED tail lights * 15-pin electrical connector * Main frame with raised outer frame for guiding the roll-off containers * Steel plate floor with roller wells in the bogie area * Container length adjustable from 5,500 to 7,000 mm * Pneumatic 4-point twistlock as well as mechanical plug-in stop brackets at the front in the rail, cargo securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair 10-ton UVV lashing rings at the front bulkhead carrier and 3 pairs 10-ton UVV lashing rings on each side of the outer frame; 4 x 2 ton four-leaf clover lashing eyes on each side; 4 x 8 ton lashing shackles recessed into the outer frame * Weld bead as anti-slip surface in the run-up ramp area * Mechanical drop-down supports at the rear Knedjl Tpc Ajpfx Ablsc * 1 pair aluminum drive-on ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Chassis, bogie, locking components, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted black * New vehicle without first registration, with full manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 46 / 2025

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,410 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Mechanical BPW support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side of the chassis * 15-pin electrical plug * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in each of the central locking bearings and 2 units on the front wall * Chassis made of fine-grain steel * Two-step access ladder in front of the front wall on the left * 3-way steel drop-side tipper body with reinforced 600 mm "Strong" sideboards * Continuous upper sideboards with internal tube reinforcement (fold-down, no intermediate stakes) including board spring lift * Bolt-on rear stakes * Combined steel swing doors as two-wing, asymmetrically split rear wall, can be opened and locked at 270° (not fold-down), with additional pivot frame for automatic rear wall opening during tipping * Rear locking via galvanized rotary locking rod and central locking * Deactivation function for automatic rear wall operation when tipping backwards with opened swing door * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing rings built into the outer frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grain steel * Rear mounting rails for loading ramps * Reinforced body with cargo securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment under the loading area, integrated into the chassis at the rear * Chassis, drawbar, tipping body, front wall, underrun protection, rear stake, rear folding supports, and entry steps hot-dip galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and support winch coated in a black tone * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Knjdpfsxf Sk Njx Ablec * Immediately available ex Egestorf

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,410 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer assembly * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Height-adjustable drawbar (adjustment range 300 mm) with 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear—activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at central locking mounts and 2 on the front wall * Chassis made of fine-grain steel * Two-step access ladder in front of bulkhead on driver's side * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" drop sides * Continuous upper sidewalls with internal tube reinforcement—no centre stanchions—foldable with drop side spring assist * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, 270° swing and lockable—not foldable—plus additional swing frame for automatic tail opening during tipping * Locking via galvanized rotary bolt latch at rear and central locking * Deactivation function for automatic tailgate operation when tipping rearwards with doors open Kodpfx Ajxf Sk Aoblenc * Lashing points: 1 x 5 t in each corner, 4 x 3 t on each side sunk into the external frame * 4 mm floor plate made of S 420 MC 4 fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate to EN 12642 XL * 1 pair aluminium loading ramps approx. 3,310 x 400 x 105 mm (8 t/pair load capacity) suitable for rubber-tyred and tracked vehicles, lockable storage compartment under the platform at the rear of the chassis * Chassis, drawbar, tipping platform, bulkhead, underrun protection, rear stanchions, rear folding supports, and entry step hot-dip galvanized * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Immediately available from Egestorf

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,410 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Height-adjustable drawbar (up to 300 mm) with a 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, fitted front right on the chassis * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (activated via reverse gear) Kjdpfx Aexf Skvebljnc * Bolt-on underride protection * Plastic quarter mudguards * Lashing hooks at the positions of the central locking system and 2 pieces at the front wall * Chassis made of high-strength fine-grain steel * Two-step access ladder front left of the bulkhead * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" side walls * Continuous upper side walls with internal tube reinforcement – without center vertical stanchions – foldable with sidewall spring lift * Rear stanchions bolted * Combination steel swing doors at the rear, 2-wing, asymmetrically split, pivotable and lockable up to 270°, non-foldable, with additional pendulum frame for automatic tailgate opening during tipping * Locking by galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate operation when tipping backwards with open swing door * Each corner with one 5 t lashing ring and each side with four 3 t lashing eyes recessed in the outer frame * 4 mm floor plate made of S420 MC 4 fine-grain steel * Rear mounting rails for drive-on ramps * Body (reinforced) with load securing certificate to EN 12642 XL * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles, lockable storage compartment under the loading area at the rear, integrated into the chassis * Chassis, drawbar, tipper platform, bulkhead, underride protection, rear stanchion, rear folding supports as well as access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,410 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit Kodpfjxf Skpex Ablonc * Tire pressure monitoring with in-cab display via EBS signal - no vehicle-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Mechanical BPW support winch at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin electrical connector * LED lighting system 12/24 V * Two LED reversing lights at the rear - activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in the central locking mounts and two at the front bulkhead * Chassis made of high-strength fine-grained steel * Two-step access in front of the bulkhead on the left (FR) * Steel pallet three-way tipper body with reinforced 600 mm Strong side walls * Full-length side walls with upper internal tube reinforcement -foldable without central stanchions- assisted by side panel coil springs * Bolt-on rear stanchions * Combination steel wing doors at rear, asymmetrically split, 2-leaf, swiveling 270° and lockable - not foldable - with additional pendulum frame for automatic tailgate opening during tipping operation * Locking via galvanized rotary bar lock at the rear and central locking system * Deactivation function for automatic tailgate operation when reversing with opened wing door * Each corner fitted with 1 x 5 t lashing ring and 4 x 3 t lashing rings recessed into outer frame on each side * 4 mm floor plate made from S 420 MC 4 high-strength fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment beneath the load area inserted in the chassis at the rear * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchion, rear folding supports, and access step hot-dip galvanized * Side panels and tailgate painted RAL 3003 ruby red * Axles, suspension, air tanks and landing gear painted in a shade of black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Wabco EBS * RDÜ Tire Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front, 2 x external drop legs at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis with 15-pin power connector * LED taillights * Closed Plastic single fenders * Foldable A-shield at the rear * Plastic impact protection buffer on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) at the front left and right * 2 interchangeable body stops for lateral centering of the bodies * Front body stops with pivoting stop, pluggable in 4 positions * 2 x 5.3 ton UVV lashing rings on each side for attaching tensioning elements * Axles, springs, air tank, and landing gear painted in a single black tone Kodpfx Ael Thyqsblsnc * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available immediately from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Includes 2 ratchet tensioners permanently mounted on the outer frame with chain case * With eyelets on both sides and quick shorteners in a special Y-design, 6.3 tons * Tensioning force with LASI certification * Wabco EBS * RDÜ tire monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with compensating unit Knsdpfx Aopk Dyxebloc * Jost landing gear at the front * 2 x external drop legs at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power connector * LED tail lights * Enclosed Plastic single fenders * Folding A-plate at the rear * Plastic impact protection buffer on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) at the front left and right * 2 interchangeable body stops for lateral centering of the bodies * Body stops at the front with pivoting stop, pluggable in 4 positions * 2 x 5.3 ton UVV lashing rings on each side for attaching tensioning elements * Axles, springs, air tank, and landing gear painted in a single black tone * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available immediately from Egestorf