Used Müller-Mitteltal Semitrailers for sale (243)

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,860 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, first registration: 07/2022, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side Lhodpfx Ajxb Igljblsn ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: new, overall weight: 50,000 kg, maximum load weight: 38,900 kg, axle configuration: > 3 axles, Year of construction: 2025, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear Lhjdpfx Absl Tihujlon * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: used, axle configuration: 2 axles, overall weight: 18,000 kg, maximum load weight: 13,750 kg, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, first registration: 10/2003, total width: 2,550 mm, Gross weight: 18,000 kg Unladen weight: 4,250 kg Payload: 13,750 kg Overall length: 8,800 mm Loading length: 6,600 mm Width: overall width 2,550 mm / platform width 2,470 mm Loading height: approx. 1,000 mm Additional information - 800 mm side panels + fold-down tailgate - Front wall 1,200 mm - Underrun protection - Gigant axles - Twin tyres 235/75R17.5 - Air suspension - Rear ramp storage compartment - Quick lowering valve Lsdpjxnvkfefx Ablehn - Rail for ramps - 4 heavy-duty lashing points - 6 pairs of lashing rings

Condition: used, overall weight: 10,000 kg, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, axle configuration: 2 axles, loading space length: 5,200 mm, first registration: 09/2003, suspension: steel, tire size: 245/70R19,5 140/138J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R19,5 140/138J, rear tire size: 245/70R19,5 140/138J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, 600 mm drop sides, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lhedpfsxg I Itox Ablen

Condition: used, functionality: fully functional, overall weight: 8,600 kg, empty load weight: 2,650 kg, maximum load weight: 5,950 kg, axle configuration: 1 axle, loading space length: 4,520 mm, loading space width: 2,200 mm, loading space height: 500 mm, first registration: 05/1996, next inspection (TÜV): 03/2026, tire size: 335/65R-18 142 G, color: blue, Year of construction: 1996, machine/vehicle number: 3795, 1 used tandem trailer Müller-Mitteltal * Internal number: 3795 * First registration: 05/1996 * Unladen weight: 2,650 kg * Permissible total weight: 8,600 kg * Payload: 5,950 kg * Loading area: 4,520 x 2,200 x 500 mm Lhedpfxsh Iviue Ablsn * Tyres: 340/65 R 18 (approved for max. 40 km/h only) Leaf-sprung tandem flatbed trailer with 'SAF' axles, front support winch, stainless steel storage box, fire extinguisher box, one-piece side panel, air brake system with drum brakes. Currently, the trailer is fitted with tyres approved for a maximum speed of 40 km/h. However, the trailer itself is approved for up to 80 km/h, as stated in the registration certificate.

Condition: used, overall weight: 6,500 kg, maximum load weight: 4,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, first registration: 07/1979, next inspection (TÜV): 04/2026, Year of construction: 1979, total width: 2,500 mm, total height: 3,000 mm,

Condition: used, overall weight: 40,000 kg, maximum load weight: 29,750 kg, axle configuration: > 3 axles, first registration: 03/2010, next inspection (TÜV): 05/2026, Dimensions - Length: 11,750 mm Unladen weight: 10,250 kg Axle load: 2 x 10,000 kg Load length over turntable: 2,400 mm incl. 350 mm bevel Load length: 7,700 mm incl. 900 mm bevel Loading height: 880 mm Width: 2,550 mm, extendable to 3,000 mm ? Recess for excavator arm storage (LxWxH approx. 2,500 x 740 x 180 mm) SAF axles with air suspension Two-piece hydraulic ramps: 2,100 mm + 2,000 mm long, 650 mm wide incl. Hydraulic ramps adjustable Ljdpfx Asxpmmmsblohn Hydraulic rear support Wheel recess after the 2nd axle: ? Front wheel recess, top length approx. 2,000 mm x 1,100 mm, bottom depth approx. 350 mm Wheel recesses between 3rd and 4th axle: ? Rear wheel recess, top length approx. 1,300 mm x 550 mm, bottom depth approx. 220 mm

Condition: new, overall weight: 36,000 kg, maximum load weight: 27,940 kg, axle configuration: 3 axles, Year of construction: 2025, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function as well as RtR valve * Traction assistance for shunting, activated on the first axle via EBS – without truck-side installation – with lifted lift axle + 30 mm driving height * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle activated from the cab for maneuvering purposes via EBS (without truck-side installation) Lodpowh Hdxjfx Ablohn * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop-down supports and rear swivel supports on the chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Rear removable LED rotating beacon * 2 additional LED reversing lights * 2 LED work lights mounted laterally on the trailer (without truck-side installation) * 7-pin socket at the rear for oversize load lighting * Side marker lights with indicator control * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Mechanically adjustable warning sign packages front and rear * Straight steel mudguards * Semi-trailer platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with top hinged lid and side doors in the chamfered corners * 400 mm high aluminum side walls (RAL 9010 pure white) on the sides of the semi-trailer platform, foldable and removable * Rear panel inserted, height 150 mm * Rear slope on the semi-trailer platform to the low bed, approx. 700 mm long with anti-slip tread plate surface and a perforated strip at the end for hanging on aluminum loading ramps * Semi-trailer platform and low loader platform with 50 mm clamped timber floorboards * Checker plate above the axles * Prepared for 3 slots underneath the semi-trailer platform for storage of optional aluminum loading ramps * Swivel arm as support for connection lines from the truck to the trailer * Load securing package (LaSi): perforated outer frame on the semi-trailer platform with 45° edge and hole pattern for lashing equipment (2 t lashing capacity per point at minimum spacing of 480 mm), each side with 2 x 6.3 t recessed lashing rings in the floor, each side with 1 x 16.5 t lashing ring in the incline from the low loader platform to the semi-trailer platform, 2 pairs of 16.5 t lashing rings in the low loader platform (1 x on the longitudinal beams after the step, 1 x above the center axle beside the longitudinal beam), each side with 3 x 13.4 t lashing rings on the outer frame (1 x at start of the semi-trailer step, 1 x at start of loading ramp slope, 1 x at end of loading ramp slope), each side with 3 x 10 t lashing rings (2 x between front wheel recess and first axle, 1 x between second and third axle), each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 x at front, 1 x at rear wheel recess) * Extended excavator arm trough running from the end of the last fixed axle over the steering axle up to the rear crossmember, with internal reinforcement profile, approx. W = 770 mm x rear D = 270/front D = 170 mm, each side with 2 x 6.4 t lashing rings in the excavator arm trough * Each side with 2 wheel recesses, 390 mm deep and 640 mm wide, f

Condition: used, axle configuration: 2 axles, Year of construction: 2014, = Additional options and accessories = - Rear air suspension - Front air suspension Ljdpfx Aoxni Hgeblehn = Notes = Tipper low-loader combination. Perm. total weight 18,000 kg, payload 13,830 kg. 3-way tipper body, approx. 5,050 x 2,420 x 700 mm (internal dimensions), 12 lashing rings, aluminium drop sides pendulum-mounted and foldable with central locking, side spring-assisted mechanisms, sliding tarpaulin. 50 mm height-adjustable towing eye. 1 pair of aluminium loading ramps in lockable compartments under the tipper. Unladen loading height approx. 1,200 mm. Two-speed landing gear at the front, foldable supports at the rear. Toolbox. 2-line air, 1-line hydraulics, 24 volt. Gigant axles, air suspension, EBS. Tyres 385-55R22.5. Chassis black, body turquoise. Sale in current condition. = Further information = Unladen weight: 4,170 kg Payload: 13,830 kg Gross vehicle weight: 18,000 kg Front tyres: 385-55R22.5 Rear tyres: 385-55R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, overall weight: 30,000 kg, empty load weight: 7,180 kg, maximum load weight: 22,820 kg, axle configuration: 3 axles, loading space length: 9,000 mm, first registration: 02/2018, next inspection (TÜV): 07/2026, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, insertable stakes, -- printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Lhsdpfxexf T Aye Abljn

Condition: used, functionality: fully functional, overall weight: 11,900 kg, empty load weight: 3,050 kg, maximum load weight: 8,850 kg, axle configuration: 2 axles, loading space length: 6,272 mm, loading space width: 2,550 mm, loading space height: 350 mm, first registration: 05/2021, wheelbase: 990 mm, color: red, Year of construction: 2021, machine/vehicle number: 3782, 1 used tandem trailer Müller-Mitteltal * Internal number: 3782 * First registration: 05/2021 * Unladen weight: 3,050 kg * Permissible total weight: 11,900 kg * Payload: 8,850 kg Lsdpfx Abexnmm Djljhn * Loading area: 6,272 x 2,550 x 350 mm * Tyres: 235/75R17.5 143 J Maximum speed: 100 km/h Loading ramps included Support load: 1,000 kg Overall length: 8,368 mm Overall height: 1,400 mm Overall width: 2,550 mm Leaf-sprung tandem platform trailer, front support winch, storage box, one-piece drop side, air brake system with drum brakes.

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Reference number for inquiries: 23185-O * Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low loader three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic suspension, drum brakes * Gross weight: 11,900 kg, payload: 8,750 kg * Tyre pressure monitoring system with cab display via EBS signal * EBS 24 Volt * Side marker lamps with indicator function * LED lighting system for 12V and 24V * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swingable, folding, and removable, prepared for retrofitting side wall extensions * Retaining cables for rear wall * Lockable compartment under the tipping body for loading ramp * Includes aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanised * 4 UVV lashing rings LC 5000daN, front and rear + 8 recessed and foldable lashing eyes LC 3000daN centred in the tipper floor * Continuously height-adjustable, hot-dip galvanised drawbar, 40mm towing eye * Net hooks * Bolted, galvanised rear stanchions * 1 plastic toolbox fitted to the right side of the chassis frame * Access step in front of the front wall ---- We are an authorised Müller-Mitteltal dealer ---- * e.g., €5⁄net per month over 60 months with no down payment and no final residual value. An offer from our financing partner FM LeasingPartner * We will gladly send you a non-binding offer. ---- Our opening hours ---- Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, we are available by appointment. We speak German, English, Polish, and French. WhatsApp Ljdpfx Aexmpd Ajblshn Leasing, financing, and trade-in options available ----

Condition: used, overall weight: 24,000 kg, maximum load weight: 13,820 kg, axle configuration: > 3 axles, loading space length: 9,400 mm, loading space width: 2,520 mm, first registration: 11/2021, next inspection (TÜV): 11/2025, Year of construction: 2021, total width: 2,540 mm, total height: 3,670 mm, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): ---- Chassis * ZANDT AT-P 400 * GIGANT axles * Air suspension * Drum brakes * Tyres: 245/70 R17.5 Ledpfewxkxhox Ablshn * ABS * EBS ----Superstructure * Low loader * Drawbar eye diameter: 50 mm * Hydraulic ramps * Hydraulically adjustable * Removable stanchions * Loading dimensions: 9,400mm x 2,500mm * Wabco Smartboard * Rear supports ----Technical Data * GVW: 24,000 kg * Technical GVW: 40,000 kg * Unladen weight: 10,180 kg * Payload: 13,820 kg * Technical payload: 29,820 kg ----#German vehicle*1st owner# Financing/Leasing/Hire purchase available on request ----Advertising/company logos on the vehicles may have been digitally removed from the images. ----Contact person by phone or WhatsApp: (German, English, Arabic) ----We look forward to your visit. To make your appointment as pleasant as possible, we kindly ask you to schedule an appointment in advance. ----Subject to errors, mistakes, and prior sale. All information without guarantee, especially equipment and accessories.

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,500 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Lodpfx Aboxmpydjlshn * Tire pressure monitoring with display capability in the truck via EBS signal – no installation required on the truck side * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors to display total axle load per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin electrical connector * LED rear lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Closed single plastic mudguards at the front * Straight steel mudflap skirts at the rear, each with spray suppression (anti-spray) * Side underrun protection * Front superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made from high-strength fine-grain steel * Deck over bogie platform from 50 mm and in low-bed platform from 60 mm softwood * Outer planks of the ramps made from 50 mm hardwood * Load securing package comprising: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform; on each side, front and rear, 1 pair of 13.4 t lashing rings on the outer frame; 1 pair of 10 t lashing rings per side, hinged and lowerable, loadable in all directions and recessed into the outer frame; bolted 5 t lashing rings to the outer frame of the wheel recesses (2 each at the front wheel recess, 1 each at the rear); 2 pairs of 6.4 t lashing rings at the sides in the excavator boom holder * 11 pairs of folding outriggers for 3 m total width (except for rear bevel) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for steel widening planks mounted crossways to the loading surface in front of the first rear axle * Excavator boom holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulic extendable ramp tip approx. 4,650 x 720 mm * Hydraulic side ramp shift * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded loading height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop supports and drive-on ramps hot-dip galvanized * Axles, air tanks and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Available from week 14/2026 * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 101,097 kg, axle configuration: 2 axles, KA-TA-R 14.4 - Tandem Three-Way Tipper Truck - Standard payload approx.: 11,050 kg - Increased to 14.4 t gross vehicle weight with 285/70R19.5 tires - Clear dimensions: 5,000 x 2,420 x 500 mm - Loaded ground clearance: 1,040 mm - 1 chassis with underrun protection, hot-dip galvanized Lhedoxmwiyjpfx Ablsn - Paint finish: axles with springs, air tanks, etc., in black - 3 pairs of lashing hooks recessed into the steel floor and foldable, LC 3,000 daN - ABS 2 S/2 M, 24 volts - 2 spring jacks for 500 mm high steel side walls - 1 central locking system on the left and right, swinging for undivided side walls Additional equipment: 1 pair UVV lashing rings recessed into the steel floor instead of on the steel floor 1 Hardox 450 steel floor, 4 mm thick Draw tube height adjustment via angle gear with crank operation instead of standard 1 pair of aluminum docking ramps without edge (8.0 t/pair), 35700 x 400 x 105 mm Suitable for rubber-tired and tracked vehicles Toolbox

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,500 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages at the front & rear * SmartBoard installed as info tool with pressure sensors for total axle load display per axle group * Reflective contour tape on sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed individual plastic mudguards at the front * Straight steel mudflaps with spray suppression at the rear * Side underrun protection * Front extension ahead of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable hinged lids (lids open towards the rear) * Chassis made of high-strength fine-grain steel * Floor over bogie platform made of 50 mm, and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package comprising: 2 lashing eyelets 6.4 t at the front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings at both the front and rear on the outer frame; 1 pair per side 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame; bolted 5 t lashing rings on the outer frame of the wheel recesses (2 pieces at the front wheel recess, 1 at the rear); 2 pairs of 6.4 t lashing rings at the side in the excavator stick rest * 11 pairs of folding outriggers for 3 m total width (except on the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the extension planks, made of sheet steel, mounted transversely in front of the first rear axle * Excavator stick rest above the rear axle to the end of the access ramp approx. 2,300 x 740 x 190 mm Lodpfsxmpykjx Ablohn * 2 wheel recesses per side approx. 640 mm wide (front 340 mm deep, rear 220 mm deep) with slide-in covers (storage for covers at the front of the bogie platform) for transporting wheel loaders with wheelbases from 3,100 to 3,640 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable ramp tip approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded loading height approx. 890 mm +/- 20 mm (incl. 860 mm approach ramp) * Chassis, bogie, folding outriggers, rear drop supports and loading ramps are hot-dip galvanized * Axles, air reservoirs and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 14/2026 * Sample images

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes Lhedpetplwfofx Ablen * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalisation at rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at front & rear * VA closed plastic fenders at front and straight galvanized sheet steel skirts at rear, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted on the side under the chassis * 15-pin power socket * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included) with simultaneous lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant lashing rings, pivoting and retractable * Loadable in all directions and recessed in the outer frame corners with 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out supports for 3 m total width (not on the rear slope) * Extension boards for widening stored in a compartment beneath the loading area * Excavator arm rest above rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on sides of excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load holding valves, hydraulically adjustable ramp offset * Hydraulic flow divider in the trailer (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min), twin-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm leveling unit * Chassis, turntable, fold-out supports, rear drop supports and drive-up ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 03/2026

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Drawbar adjustable in height by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall * Main frame made of high-tensile steel * Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking * Rear stanchions bolted * Steel rear wall slid in front of the ramps * At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm floor made of high-tensile steel * Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and landing gear painted black * Side panels and platform in RAL 9010 pure white * Painting of the side panels and tipping body in a RAL color of choice available at extra cost * New vehicle with manufacturer warranty Ljdetr Sucepfx Abljhn * Subject to errors and prior sale * Available from CW 07/2026

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes Ljdjtr St Ujpfx Ablohn * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical fold-down supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin power connector * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Lashing hooks on the sides and rear in the central locking mounts, plus 2 pieces on the front wall * Main frame made of fine-grained steel * Steel pallet two-way tipper body: front wall fixed, made of smooth sheet; continuous side walls, foldable without center stakes with drop side spring assist and oscillating via manual central locking * Rear stakes bolted * Steel rear wall inserted in front of the ramps * Each corner fitted with one 5 t lashing ring and four 3 t lashing eyes recessed in the outer frame on each side * 4 mm floor made of fine-grained steel * Two-piece mechanical grid ramps with aluminum pointed section 2,150 + 1,300 mm x 600 mm (manually retractable down to 80 mm) * Chassis, drawbar, rear stakes, underride guard, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in black * Side boards and platform in RAL 9010 pure white * Side walls and tipping platform can be painted in a different RAL color for an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: * RDÜ (Tire Pressure Monitoring) * EBS (Electronic Braking System) * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 t BPW Axles * Air Suspension with Lift and Lowering Facility * Mechanically Adjustable 3 m Warning Sign Packages Front and Rear * Drawbar Adjustable in Height by 300 mm with 40 mm Flange Tow Eye * Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (therefore B-measure of approx. 8,080 mm) * Support Winch at Front * External Folding Supports at Rear * Plastic Toolboxes approx. 750 x 350 x 300 mm each on left & right side * Side Impact Protection * Underrun Protection * Plastic Quarter Mudguards * 15-pin Power Connector * LED Lighting System 12 / 24 V * 2 Additional LED Reversing Lights at Rear (activated via reverse gear) * 1 Removable LED Beacon incl. Bracket at Rear * 400 mm High Bolted Front Wall Lodpfjv D Tbdex Ablehn * 50 mm Softwood Floor * 2 Pairs of Container Locks (extendable to 3 m container external width and lockable, lock dimension retracted as per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm - this dimension is not to DIN - for an absolute outside width of 3,000 mm) * Perforated Outer Frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; each side fitted with 5 x 3 t UVV-compliant lashing rings; at each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the softwood floor, rear in the end cross member); various holes in front and rear cross members for 1.2 t lashing options * 1 Pair Aluminum Slide-in Ramps approx. 3,570 x 410 mm (10 t capacity / pair) suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated into chassis below the loading area * --- Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized --- * Axles, air tank, front winch and flange tow eye painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 09/2026

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS brake system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign holders front & rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Folding (hot-dip galvanized) toolbox lid in the turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm - powder-coated black - fitted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four stake pockets on each side (no stakes present) with lashing capability Lhsdpfx Aboq Dyv Ielsn * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant swing-out and retractable lashing rings * Loadable in all directions and integrated into the outer frame at the corners (13.4 t), elsewhere 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in a compartment under the loading surface * Excavator arm support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically folding ramp tips and load holding valves, hydraulically lateral ramp displacement * Hydraulic flow divider in the trailer (for truck hydraulic pump output over 40 l/min up to max. 140 l/min), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded platform height approx. 860 mm +/- 30 mm (compensation unit) * Chassis, turntable, folding outriggers, rear drop supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 03/2026

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal without in-truck installation required * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange towing eye * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin power connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks located laterally and rear in the central locking mounts, plus 2 on the front wall Lhedpfx Abotr St Holsn * Main frame made from fine-grain steel * Steel pallet/2-way tipper body with fixed smooth sheet steel front panel, continuous side panels—foldable without central stakes, equipped with drop-side spring lifters and capable of pendulum function via manual central locking * Rear posts bolted * Steel rear wall slid in front of ramps * Lashing points: 1 x 5 t in each corner, plus 4 x 3 t lashing rings recessed laterally in the outer frame * 4 mm floor made of fine-grain steel * Two-piece mechanical grating ramps with aluminum end piece, 2,150 + 1,300 mm x 600 mm (can be manually reduced to 80 mm width) * Chassis, drawbar, rear posts, underrun protection, mechanical drop supports, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Drop sides and body in RAL 9010 pure white * Side walls and tipper body can be painted in any RAL color for an additional charge * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Available from calendar week 07/2026

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: * RDÜ (Tire Pressure Monitoring System) * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders Lhodpfx Asv D Tbkjblon * Drum brakes * 2 x 7 t BPW axles * Air suspension with lift and lower function * Mechanically adjustable 3-meter warning sign boards at front and rear * Drawbar height adjustable by 300 mm with 40 mm flange towing eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * Support windlass at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED beacon (removable incl. mount) at the rear * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with a total outer width of 3,000 mm * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm, possible installation of 3 t folding lashing brackets every 600 mm; 5 x 3 t UVV-compliant lashing brackets mounted per side; at each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the rear cross member), various holes for 1.2 t lashing options in the front and rear cross members * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear integrated storage compartment below the loading area inside the chassis * ---Chassis, drawbar, front wall, underrun protection, and rear stabilizers hot-dip galvanized--- * Axles, air tanks, front windlass, and flange towing eye painted in a shade of black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 09/2026

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,740 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * Smard board for payload weight determination * Warning sign packages front & rear Lsdel Tphrjpfx Ablshn * Reflective contour tape on the sides and rear * Rear removable beacon light * LED lighting * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, fitted on the right side * Front closed single fender made of plastic * Rear straight steel mudguard aprons, each with spray protection (spray suppression) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and three integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring above turntable platform made of 50 mm and in low-bed platform of 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (stakes not included), each with 2 t lashing point * Lashing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On each side front and rear: 2 pairs of 13.4 t lashing rings on the outer frame, and 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm recess * 8 pairs of galvanized folding outriggers for 3 m total width (except for the rear slope) * Widening planks stored in a box on the left side * Excavator arm recess above the rear axle up to the start of the ramp incline: approx. 2,100 x 740 x 190 mm * Mechanical support legs at rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic ramp lateral shift & load holding valve * Load area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded deck height: approx. 890 mm, +/- 20 mm (incl. 860 mm ramp incline) * Flow divider installed * Chassis, turntable, access ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale reserved * Available from CW 07/2026

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,350 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck display via EBS signal (no installation on the truck necessary) * 2 x 9-ton Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost support winch at the front * Foldable, galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform on the front wall * Manual roll-over tarp * 15-pin electrical connector Ledsxl Nkgopfx Ablshn * LED tail lights with galvanized protective cover * Chassis made of high-tensile fine-grained steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – swinging via manual central locking and foldable with drop side spring assist) * Roll-over tarp in RAL 7038 agate grey with tensioning by ratchet straps at the sides and tensioning rubbers front and rear * Front wall platform made of grating with access step at the drawbar and a grab handle on the front wall * Rear wall made of HBW 400 steel, swinging with automatic two-claw locking * 5 mm steel floor made of HBW 450 steel * Four 3-ton recessed and foldable lashing rings per side – embedded in the steel floor * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons * Tipper body and side walls painted in RAL 9010 pure white * Drop sides painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 11/2026 * Sample images