Used Müller-Mitteltal Work Platform Trailers for sale (270)

Condition: used, first registration: 10/2013, suspension: air, Year of construction: 2013, ABS, EBS, automatic linkage adjusters, 2 x 10-ton axles (BPW), air suspension, drum brakes, spring-loaded parking brake on the rear axle, pneumatically lowerable drawbar, release valve on the front axle, ratchet tensioner, hydraulic side clamping system, closed storage box, two reversing lights, tool box, spare wheel holder, closed side underrun protection, fixed rear underrun protection, rear bumper on the underrun protection, foldable warning sign, container volume 2 x 10 cubic meters, tipper body. Fpodpfx Aajy S Sx No Eek EXW 27793 Wildeshausen Available short-term.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 tons Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----General components: * Jost mechanical front support jacks * 2 mechanical, hot-dip galvanized folding support jacks at the rear * Hot-dip galvanized bolted under-run protection * Tool box made of galvanized sheet steel on the right side * Plastic quarter fenders * 2-step step on the left side as an aid for getting on ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pole power socket * LED tail lights ----Tipping bridge: Fodpfx Aasv Dz N No Ejpk * Steel, 3-sided tipping body * Continuous side walls at the top with internal tube reinforcement - without center supports - foldable with side panel spring lifters * Folding rear gate and pivoting via manual central locking * Hot-dip galvanized bolted rear supports * 4 mm sheet steel floor made of fine-grained steel * Lashing hooks, receiving rail at the rear for loading ramps * Preparation for later retrofitting of side panel attachments ----Chassis: * Hot-dip galvanized chassis ----Load securing: * 1 x 5 tons lashing eye in each corner, as well as 4 x 3 tons lashing eyes on each side embedded in the outer frame ----Aluminum loading ramps: * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, embedded in the chassis ----Tires: * Tires 385/55 R 22.5 ----Painting: * Axles, springs, air tanks and support jacks painted in a black tone * Chassis, drawbar, floor, front panel, folding supports hot-dip galvanized * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) can be changed up to approximately 6 weeks before completion ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available from approximately week 45 / 2026

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring accumulators * Drum brakes Fpjdpfx Aastplv Ns Esk * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for displaying total axle load per axle group * Side impact protection * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Tool box made of galvanized steel sheet, approx. 650 x 300 x 600 mm (black powder-coated), on the right side * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with turn signal control * Drawbar with 40 mm towing eye and height adjustment via tension spring & locking pin * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber covering on the folding ramps and on the access ramps on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood flooring on the running surfaces of the low-loader platform * 4 lashing pockets on each side with simultaneous 2-ton lashing capability * La-Si package consisting of: 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear ramp) * Log holder under the loading area in the longitudinal direction * Roller stop in front of the front beam, raised with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding valves * Hydraulic lateral ramp adjustment * Hydraulic rear supports (single-stage cylinder) * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 liters up to max. 140 liters/min.) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm access ramp) * Loading height when loaded: approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted in a black tone * Loading height when loaded: approx. 890mm +/- 20mm * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 45/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: Fpjdpfjxglibjx Aa Esk * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost front support legs * Outboard hot-dip galvanized folding support legs at the rear * Plastic tool box on the front right, outside on the front wall * Lateral impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm hardwood flooring * Provision in front of the front wall for subsequent installation of container locking mechanisms * Bolted front wall made of smooth sheet metal * Steel sheet metal side walls - trapezoidal profile - foldable with sideboard spring lifter * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside the front wall * Rear cross members bolted on ----Load securing: * Perforated outer frame angled at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * 1 x 6.3-ton lashing eye at each front and rear corner * Various holes in the front and end cross member for 1.2-ton lashing ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of the side walls in a RAL color possible at an extra charge ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 41/2026

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 tons Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----General components: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fenders * 2-step step on the left side as an aid for getting on ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pole power connector * LED tail lights ----Tipping bridge: * Steel, 3-sided tipping body * Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized bolted rear posts * 4 mm fine-grained steel floor * Lashing hooks, receiving rail at the rear for loading ramps * Preparation for later retrofitting of side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame ----ALU loading ramps: Fpsdpfxjl Th A Ej Aa Eek * 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, embedded in the chassis ----Tires: * Tires 385/55 R 22.5 ----Painting: * The axles, springs, air tanks and landing gear are painted in a black tone. * Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized. * Painting of the side walls in RAL 9010 pure white. * Painting of the side walls in an RAL color against surcharge possible. ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 45/2026

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter fenders * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear ----Tipping bridge: * Net hooks on the side and rear in the bearings of the central locking system, as well as 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with sideboard spring lifters * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, embedded in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and track vehicles * Lockable storage compartment at the rear under the loading area, embedded in the chassis ----Tires: * Tires 235/75 R 17.5 ----Paintwork: Fpodpfxjq Hg Dxo Aa Eek * Axles, springs, air tanks, drawbar and support winch painted in a black tone * Sideboard painted in RAL 9010 pure white * Painting of the side walls in a RAL color against extra charge * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 45/2026

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: * Tool box made of galvanized sheet steel on the right side * Bolted underrun protection Fpjdpfx Asv Dz N Aoa Ejk * Plastic quarter fenders * Jost mechanical front support legs * 2 mechanical, hot-dip galvanized folding support legs at the rear ----Tipping bridge: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with side board spring supports * Folding tailgate and pivoting over a manual central locking system * Hot-dip galvanized, bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, recessed in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar and support legs painted in a black tone * Side board painted in RAL 9010 pure white * Painting of the side walls in an RAL color possible at an extra charge * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approximately week 45/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating mechanism ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost front support jacks Fjdpfoxglh Rjx Aa Espk * External, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side, on the front panel * Lateral impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm softwood flooring * Device on the front panel for the subsequent installation of container locking mechanisms * Bolted front panel made of smooth sheet metal * Steel side walls - trapezoid profile - foldable with side panel spring lift * Steel rear wall can be slid in between the ramps - bracket for storage when not in use, inside the front panel * Rear cross members bolted ----Load securing: * Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible * 1 x 6.3-ton lashing point in the front and rear corners * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front panel, ramps, and rear wall * Side panel color in RAL 9010 pure white * Painting of the side walls in a RAL color possible at an extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available from approx. week 41/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs Fpsdpfx Aajl Th Ade Ejk * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic fenders, and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour striping on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via coil spring & tension lock * 15-pole electrical connector * 4 lashing pockets on each side (however, no lashing bars are included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform, 5 pairs of pivoting and lowering UVV lashing rings, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons. * 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope) * Extension boards placed in the center of the loading area * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator arm rest) * Hydraulically operated, single-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. are painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Available from approximately week 44/2026

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2026, * PT 30 Profile: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar 1,200 mm long with 40 mm drawbar eye and height adjustment via tension spring & locking bolt ----Electrical system / Lighting: * Smart board mounted on the trailer as an information tool (for axle load display - separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (detachable) at the rear ----General components: * Lateral impact protection * Swivel supports at the rear of the chassis frame * Mechanical adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash guard * Rear straight galvanized steel side skirts with splash guard * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, on the right side * Box in the turntable for accessories with hinged lid, 2 continuous locking mechanisms, permanently installed (directly behind the turntable platform) * 2 pieces of galvanized steps on the turntable, left + right ----Low-loader platform: * ROBOTER welded ANTI-SLIP coating on the steel plate of the turntable platform (protruding weld beads) ----Load securing (La-Si package consisting of): * 2 lashing eyes (13.4 tons) at the front left & right on the front wall beam * 1 pair of UVV lashing rings (13.4 tons) at the front & rear, as well as 3 pairs of UVV lashing rings (10 tons) on each side, swivel and lowerable, loadable in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2-ton lashing option * Profifix lashing rail in the longitudinal axis in the middle, in the level area for lashing up to LC 3000 daN ----Extension: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards placed in the middle of the loading area ----Ramps: * Hydraulic, single-piece ramps, approx. 3,000 x 720 mm * Mechanical, adjustable on the side * Control block 4-way for later retrofitting of hydraulic ramp displacement ----Excavator arm rest: * Excavator arm rest extending across the rear axle to the end crossbeam (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest on the side in the longitudinal frame ----Loading height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Painting: * Chassis, turntable, folding outriggers, support legs and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: Fpsdpfjxptn Rex Aa Esk * Available from approx. week 45/2026

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 05/2026, loading space length: 6,250 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Further information 400mm fold-down sideboards - Spring-assisted sideboard lifters - Removable rear wall Fedpfx Aaoy Hn D Rj Eepk - Large lashing package - Perforated load bed rail - Height-adjustable front support leg - Foldable rear support legs - Plastic toolbox - BPW axles - Spring mesh ramps

Condition: used, maximum load weight: 9,050 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 10/2026, loading space length: 5,500 mm, loading space width: 2,430 mm, loading space height: 1,100 mm, total width: 2,550 mm, Total weight: 11,900 kg Unladen weight: 2,850 kg Fpjdpfx Aszc Dnvoa Eek Payload: 9,050 kg Overall length: 7,400 mm Loading length: approx. 5,500 mm Width: 2,550 mm / Loading width approx. 2,430 mm Loading height: approx. 1,100 mm Further information: - Drawbar adjustable in height - Front support leg adjustable in height - 800 mm side boards + folding tailgate - Side boards split, Kinnegrip K20 - BPW axles - Air suspension - Wheel chocks The vehicle may be fitted with advertising and/or lettering.

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2028, Year of construction: 2012, Internal vehicle number: G300402 Fpedpfxexy Ul Sj Aa Eok Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Year of manufacture: 2012 Unladen weight of the semi-trailer: 6,530 kg Concrete mixer semi-trailer LIEBHERR 10 m³ Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMM000000P0070133, empty load weight: 8,433 kg, maximum load weight: 3,467 kg, overall weight: 11,900 kg, axle configuration: 2 axles, permissible axle load (axle 1): 5,450 kg, permissible axle load (axle 2): 5,450 kg, first registration: 03/2023, tire size: 235/75 R17.5 143J, Year of construction: 2023, Exceptionally well-maintained low-bed trailer. Fpedpszl Tvyjfx Aa Eek The low-bed trailer is ready for immediate use. Viewings are possible by appointment. VAT is shown separately.

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco axles ----Suspension: * Air suspension with raising and lowering function using an RtR valve ----Drawbar: * Drawbar with 40 mm towing eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS (tire pressure monitoring system) * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel mud flaps, each with splash guard * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the tool compartment in the turntable platform ----Low-bed platform: * 4 pocket slots on each side with simultaneous 2-ton lashing capability * 6 pairs of mechanically folding outriggers for a total width of 3 meters (however, not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the side ----Load securing (Load Securing Package): * 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame - in the corners 13.4 tons, otherwise 10 tons. ----Excavator arm rest: * Approximately 2,100 mm long from the rear axle to the end crossmember (2 pairs of 6.4-ton lashing rings on the side in the excavator arm rest) ----Loading area: * above the turntable: approx. 1,960 x 2,520 mm * rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) ----Loading height: * unladen approx. 1,070 mm * laden approx. 910 mm ----Tires: * 235/75 R 17.5 Fodjl Tq Euspfx Aa Espk ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Sample images ----Delivery time: * available from approximately week 32/2026

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox Fpedjxb Iglopfx Aa Esk ? EBS ? support legs ? twin tires ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: used, empty load weight: 3,350 kg, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2006, next inspection (TÜV): 08/2026, suspension: air, tire size: 455/40R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 2 axles, BPW axles, turntable, air suspension, ABS (anti-lock braking system), container locking mechanism, U-guard, side aluminum fender, storage box. Superstructure: External roll-on/roll-off trailer for roll-off containers up to 7m, 2 x 9-ton BPW axles, drum brakes, 2 x pneumatic container locking mechanisms! Spare wheel available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Fjdpfxezl At Ie Aa Eopk

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes ----Axles: * 2 x 10 ton BPW wide-track axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Drawbar: * Drawbar approximately 2,300 mm long with a 40mm drawbar eye and height adjustment via tension spring and locking mechanism ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * 15-pole power connector * LED tail lights ----General Components: * Plastic toolbox 450 x 470 mm on the right side * Equipment box on the side 1,000 x 500 x 5,000 mm * Closed plastic mudguards front and rear * Closed side impact protection as an advertising space Fjdev Nulzopfx Aa Ejpk * Underrun protection at the rear * Plastic impact protection buffer at the rear * A-frame sign at the rear ----Container Running Surface: * Roll-on length approx. 6,830 mm * Pneumatic 4-point clamp locking system * Mechanically adjustable stop angles (2 positions) at the front left and right on the running surfaces * Suitable for containers with lengths of 5,500 - 7,000 mm ----Tires: * 265/70 R 19.5 twin tires ----Unladen Weight: * 3,220 kg ----Riding Height: * Approx. 1,130 mm when loaded ----Painting: * Hot-dip galvanized chassis * Air tank, axles, slewing ring and drawbar ----Information: * --Technically, a permissible total weight of 20,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low Loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards placed in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and embedded in the outer frame in the corners at 13.4 tons, otherwise 10 tons. ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: Fpodpfx Ajx Ipavsa Ejk * 235/75 R 17.5 twin tires ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: * --Technically possible gross vehicle weight of 30,000 kg-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, RS-T 18.0 / 018: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes ----Axles: * 2 x 10-ton SAF axles ----Suspension: * Air suspension with automatic lowering when the brake is released ----Drawbar: * Drawbar, 2,300 mm long, with 40 mm drawbar eye and height adjustment via tension spring & spindle ----Electrical system / Lighting: * TPMS (tire pressure monitoring system) * LED tail lights with protective cover * 2 x 7-pole power connectors ----General components: * Plastic toolbox on the right side, closed plastic fenders * Side, closed underrun protection as an advertising space * Underrun protection with 2 impact buffers * Folding A-sign at the rear for waste disposal ----Container running surface: * Roller track length approx. 6,950 mm * Roll container secured by pneumatic 4-point claw locking system * At the front, there are 2 plug-in container stops with 2 additional plug-in positions * Suitable for container lengths of 5,000 - 7,000 mm ----Riding height: Fpsdpfxjl Tqkwj Aa Esk * Unladen approx. 1,165 mm ----Painting: * Chassis hot-dip galvanized * Air tank, axles, swivel bearing and drawbar ----Information: * --Technically, a permissible total weight of 20,000 kg is possible-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 15,970 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 21.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Lighting / Electrical system: * 15-pin power connector * LED lights 12/24 V * TPMS (tire pressure monitoring system) ----General components: * Jost support legs (front) * Outboard folding supports (rear) * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side impact protection * Plastic quarter fenders ----Low-loader platform: * In front of the front wall and rear slope, provision for subsequent installation of container locking mechanisms for the transport of 20" containers * Design for 21 tons GVW with reinforced frame and reinforced axles * Reinforcement package for drilling equipment transport on the chassis * 50 mm softwood flooring in a clamped design * In front of the front wall, provision for subsequent installation of container locking mechanisms * Bolted front wall made of smooth sheet metal * Divided side walls made of steel sheet - trapezoid-profiled - foldable with a folding mechanism in the center * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside the front wall * Rear rails bolted ----Load securing: * Perforated outer frame angled approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing brackets possible every 600 mm * Profifix lashing bar in the longitudinal axis in the center for lashing capability up to LC 3000 daN * In the corners, front and rear, 1 x 10-ton lashing points each * Lasi package with 2 x 8-ton lashing rings each on the sides, recessed in the outer frame, various holes in the front and end cross members for 1.2-ton lashing capability ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be slid together to 20 mm) * Approach angle at the rear approx. 860 mm chassis ----Loading heights: * Unloaded approx. 940 mm * Loaded approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in RAL 9010 pure white * Drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone Fodpfx Aasq Dyu Uj Ejpk ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, RS-T 18.0 / 018: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Disc brakes ----Axles: * 2 x 10-ton SAF axles ----Suspension: * Air suspension with automatic lowering when the brake is released ----Drawbar: * Drawbar, 2,300 mm long, with 40 mm drawbar eye and height adjustment via spring and spindle ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * LED taillights with protective cover * 2 x 7-pin electrical connectors ----General Components: * Plastic toolbox on the right side, closed plastic fender * Closed side impact guard as an advertising surface Fsdel Tpy Hjpfx Aa Eopk * Underrun protection with 2 impact buffers * Foldable A-sign at the rear for waste disposal ----Container Running Surface: * Roller track length approx. 6,950 mm * Roller container is secured by pneumatic 4-point claw locking system * At the front, there are 2 pluggable container stops with 2 additional plug-in positions * Suitable for container lengths of 5,000 - 7,000 mm ----Ride Height: * Unladen approx. 1,165 mm ----Paint Finish: * Chassis hot-dip galvanized * Air tank, axles, slewing ring and drawbar ----Information: * --A technically feasible gross vehicle weight of 20,000 kg-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: used, empty load weight: 3,290 kg, maximum load weight: 8,610 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 05/2027, loading space length: 7,100 mm, loading space width: 2,500 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminum fender, adjustable drawbar. Superstructure: Tandem low-bed trailer with mechanical ramps and wooden floor. Loading height approx. 920mm, 2 x Gigant axles, drum brakes, frame and ramps galvanized! Currently derated to 10,000 kg (payload 7,610 kg), 40 mm drawbar eye. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Fpjdpjy Ui Itofx Aa Esk

Condition: good (used), functionality: fully functional, empty load weight: 2,600 kg, maximum load weight: 7,000 kg, overall weight: 9,600 kg, axle configuration: 1 axle, Year of construction: 2012, Müller Mitteltal Type EK9.6 First registration 05/2012 3-way tipper Sideboards 0.70m high, aluminum Tipper bed, steel, approx. 4.00m long, approx. 2.42m wide Fpodszl Td Djpfx Aa Esk Loading height approx. 1.30m Central locking system for sideboards (opening at the top or bottom) 40mm drawbar eye Rear support leg for folding down Front support leg with crank Leaf spring suspension BPW Eco Plus axle Tires 385/65 R22.5, right 100% good, left 20% good Unladen weight 2,600 kg Payload 7,000 kg Permissible total weight 9,600 kg Air tank NEW From first German owner MOT valid until 06/2027 Serial number: WMM00000C0055843 MOT/TÜV valid until 06/2027 _____ Typographical errors and errors in this offer are expressly reserved. Only the specific agreements in the order confirmation or the purchase contract are binding.

Condition: used, empty load weight: 4,300 kg, maximum load weight: 10,100 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 06/2027, suspension: other, Year of construction: 2014, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, * Platform length = 6.71 m / width = 2.39 m Fpodpfx Aezl Eu Isa Esk * Payload = 10,100 kg * 8 pairs of stakes ... Air suspension, first owner, used vehicle, including VAT.