Used Müller-Mitteltal Etü Trailers for sale (263)

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Bwodpfxoxf Skpe Ahzeg * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: used, maximum load weight: 7,500 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2004, Year of construction: 2004, * Müller-Mitteltal KA TA T * Trailer * Tipper * Three-way tipper * Permissible total weight: 10,500 kg * Unladen weight: 3,000 kg * Payload: 7,500 kg * Tires: see pictures * BPW axles * Immediately available * Subject to errors and prior sale We offer: Bwodpfex Izi Njx Ahzjg Net purchase for EU companies with VAT identification number as well as for customers from non-EU countries. Leasing and financing options available. Completion of all customs formalities. Issuance of temporary and export license plates. Transport to port. All prices listed in the classifieds are gross prices and already include the statutory VAT of 19%.

Condition: used, overall weight: 31,500 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 07/2026, loading space length: 7,500 mm, loading space width: 2,540 mm, Equipment: ABS, * Faymonville Max 300 Tridem Low Loader Trailer * First registered 05/2016, Luxembourg registration, TÜV valid until 07/2026 * Gross weight: 31.5t (24t in the country of registration) * Unladen weight: 7,065t * SAF axles, air suspension, raise/lower function * ABS/EBS * Twin tires * 235/75R 17.5 * 1st axle: lift axle (11/11-11/11mm) * 2nd axle: (9/9-9/9mm) * 3rd axle: steering axle with lock valve (6/6-8/8mm) * Drawbar with 50mm towing eye, approx. 88cm coupling height, adjustable plate +/- 10cm * Load area: 7.50m, rear end 1m chamfered, wooden floor, central chequer plate section, rear approx. 1.68m wood flooring * Width: 2.54m + approx. 0.23m side extensions * Loading height: approx. 92cm * Front wall: 40cm * 2 heavy-duty lashing eyes on the front wall * 6 pairs of retractable lashing rings in the outer frame * 5 pairs of stake pockets in the outer frame * Hydraulic ramps: 2.93m x 0.8m with timber covering, can be manually pushed together * Rear fitting for rotating beacon Bodpfxjx Iaq Se Ahzswg * 2 x LED reverse lights * 2 stainless steel toolboxes * Empty compartment for extension beams * 2 folding supports at the rear * Vertical load: 1t ---- Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * WhatsApp: * Outside of business hours we are available by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, and trade-in possible

Condition: used, maximum load weight: 8,840 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2018, next inspection (TÜV): 12/2026, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 490 mm, total width: 2,550 mm, total height: 1,550 mm, Müller Mitteltal KA-TA-R 11.9t * Tandem three-way tipper trailer * Tipper * Truck trailer * One owner * First registration: 25.10.2018 * Main inspection (TÜV): 12/2026 * Gross weight: 11,900 kg * Unladen weight: 3,060 kg * Payload: 8,840 kg Bsdpfx Ahjx Ibl Djzswg * Overall dimensions: 7150 mm x 2550 mm x 1550 mm * Internal dimensions: 5000 mm x 2400 mm x 490 mm * Continuously adjustable drawbar eye height * All supply lines to the towing vehicle protected within hot-dip galvanized draw tube * Chassis hot-dip galvanized * Side boards laser-welded from fine grain steel * Fixed front wall made from sheet metal * Side walls with top internal tube reinforcement and spring assist * Drop sides and tailgate can swing, fold down and be removed (central locking) * Brake system as per EC directive 71/320/EEC et seq. with ABS 2S/2M and spring-loaded parking brake * Leaf suspension * Boarding plank compartment * Hydraulic three-way tipping system * Recessed lashing points in deck * Supports * Landing foot * Tyres: 235/75R17.5 143 J * Board wall spring IMPORTANT! PLEASE READ! We explicitly reserve the right to prior sale, as this item is also listed on other platforms. We highly recommend inspection and appraisal to ensure correct understanding of condition and suitability. Inspections and tests by appointment are possible and expressly encouraged! Images may be sample images and can include optional extras subject to additional charges. Stated internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf Bwjdjxf Sk Ajpfx Ahzjg

Condition: used, axle configuration: 2 axles, first registration: 08/2007, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, Year of construction: 2007, * Müller Mitteltal KA TA T 10.5 * Trailer * Tipper Bjdpfxjx Izipo Ahzswg * Three-way tipper * BPW axles * Tires: see pictures * Drum brakes * Leaf spring suspension * Immediately available * Errors and omissions excepted We offer: Net purchase for EU companies with VAT ID and for customers from third countries. Leasing and financing options. Handling of all customs formalities. Provision of temporary as well as export license plates. Transport to the port. All prices listed on classified ads are gross prices and already include the statutory VAT of 19%.

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: Bjdpfx Ahexf Skvezowg * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection Bsdpfx Ahjx Ipa Nezowg * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * 4 stake pockets per side (no stakes present), can also be used as lashing points * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t. * 6 pairs mechanical folding outriggers for 3 m overall width (not included in the rear slope) * Widening planks stored in the center of the loading area * Dipper stick tray over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the dipper stick tray) * Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 12/2026 * Sample image

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 'Masterline' ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * Two mechanical, hot-dip galvanized rear folding support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: Bwedpfx Ahsl Thyxozjg * 15-pin power connector * LED lighting * RDÜ tire pressure monitoring system ----Tipper Body: * Net hooks on sides and rear in the central locking bearings as well as 2 on the front wall * Steel pallet 3-way tipper body (continuous side walls, without center posts), foldable with drop side spring assistors * Rear corner posts bolted * Combination rear steel swing doors, double-leaf, asymmetrically split, can be swung and locked at 270° (not foldable), plus additional swinging frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock and central locking system * Deactivation function for the automatic tailgate feature when reversing with an open swing door * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes in the outer frame on each side ----Ramps: * 1 pair aluminum drive-on ramps, approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, mounted under the load area, integrated into the chassis ----Painting: * Drawbar, front wall, tipper body, rear posts, underrun protection, and mechanical support legs, hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall paint finish in a RAL color of your choice available at extra cost * Axles, springs, flange towing eye, air tank, and landing leg painted in black ----Additional Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 10,980 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brake: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange-eye: * Drawbar adjustable in height by 300 mm (drawbar extension by 250 mm up to 2,250 mm) * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * 15-pin electrical connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at the rear ----General attachments: * Support winch at the front * Externally mounted galvanized foldable supports at the rear * Plastic toolbox approximately 858 x 500 x 500 mm mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader platform: * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Side panels made of trapezoidal-profiled sheet steel, foldable with drop-side spring assist * Rear wall made of steel, slidable between the ramps (mounting bracket for stowing in front of the bulkhead when not in use) * Bolted rear stanchions * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber covering strip on the inside of the drive-up ramps * On the approach slope as well as on the outside of the low-loader platform (from bulkhead to rear end beam) 12 mm thick and 210 mm wide rubber covering strips ----Load securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets possible every 600 mm * In the corners front and rear, each with 1 x 6.3 t lashing ring * Various holes in the front and rear end beams for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for one-man operation approx. 2,750 x 870 mm (collapsible down to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in a shade of black * Side panels painted in RAL 9010 pure white ----Info: Bjdpfex Ipbajx Ahzswg * -- Reinforced and certified body according to EN 12642 XL including load securing certificate -- * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Sample photos (pictures of the vehicle may vary due to special equipment) ----Delivery time: Vehicle available from week 10/2026

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye ----General Attachments: * Jost mechanical support winch at front * Two mechanical, hot-dip galvanized folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underride guard * Plastic quarter fenders ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Bed: * Net hooks on the sides and rear, fitted to the central locking bearings, plus 2 on the front bulkhead * Steel pallet 3-way tipper body (continuous sidewalls - without center stanchions - foldable with drop-side spring assist) * Rear stanchions bolted * Steel combination swing doors at the rear, asymmetrically split, 2-leaf, can be swung and locked to 270°, not foldable – also equipped with additional swinging frame for automatic tailgate opening during tipping. Locking via galvanized rotary bar lock and central locking system * Deactivation function for automatic tailgate during rear tipping with open swing door * 4 mm steel floor plate * Mounting rails at the rear for loading ramps ----Load Securing: * One 5 ton lashing point in each corner * Four 3 ton lashing rings recessed into the outer frame on each side ----Ramps: * One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the load area, inset into the chassis, accessible from the rear ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underride guard, mechanical support legs hot-dip galvanized Bsdpfxel Thymo Ahzowg * Sidewalls and tailgate painted RAL 9010 pure white * Other RAL shades for sidewalls available at extra cost * Axles, springs, towing eye, air tanks, and support winch painted black ----Other Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 13,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal (without truck-side installation) * 2 x 9 t Gigant axles * Air suspension with leveling during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform at the front wall * Manual sliding tarpaulin * 15-pin power plug * LED tail lights with galvanized protective cover * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM-profile – continuous, without central stanchion – swingable via manual central locking and left side folding panel with sidewall spring lifter) * Rolling tarpaulin similar to RAL 7038 agate grey with tensioning by side tension ratchets and tension cords at front and rear * Front wall platform made of grating with step at the drawbar and one handrail at the front wall * Rear wall – made of HBW 400 steel – swingable via automatic 2-claw locking * 5 mm steel floor made from HBW 450 steel * Four 3 t recessed and foldable lashing rings per side – embedded in the steel floor * Reinforced and certified superstructure as per EN 12642 XL including load securing certificate up to 19 t * Tipper body and side walls in RAL 9010 pure white * Painting of side panels in RAL 9010 pure white * Painting of side panels in a RAL color of choice available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Available from KW 11/2026 Bsdpfx Aoxl Nkgshzowg * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, RAK 18.0 Outer-Roller with Rear Tipping Function ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatically lowers when the brake is disconnected) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox, approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axle * Enclosed lateral underrun protection * Bolt-on rear underrun protection * Storage box for container nets, made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable "A-sign" at rear * Rear collision protection buffer ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical system * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm in length ----Container Running Surface / Tipping Platform: * External roller guidance via flat steel limitation with a clear width of approx. 2,180 mm, paired with three lateral centering pieces on each side for container guidance * At the rear, two recessed, tipping frame-integrated roller bearings with pneumatic longitudinal anti-slip locks are installed to hold and stop container rollers * Positive locking of roll-off containers via a pneumatically operated cross-clamping unit (single-side operation) installed at the front end of the tipping frame and operable from the outside * Chassis frame with rearward-tipping main frame – single-tube, engine-hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are pushed on from the front; hot-dip galvanized chassis Bodpfjx Ipa Asx Ahzjwg ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Approx. 1,270 mm unladen ----Finish: * Rear underrun protection and locking components (without topcoat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black shade * Hot-dip galvanized ----Information: * For container transport per DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Sample images (actual vehicle may differ due to special equipment) ----Delivery Time: * Available from CW 24/2026 (calendar week)

Condition: new, maximum load weight: 10,980 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brake System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * 300 mm height-adjustable drawbar – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at the rear ----General Attachments: * Support winch at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm at the front right exterior on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Fittings in front of the bulkhead for subsequent installation of container locks * Bolted smooth sheet bulkhead * Side walls made of steel – trapezoidal profile – foldable with sideboard spring lift * Steel rear wall, insertable between the ramps – storage holders inside front bulkhead when not in use * Bolted rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on the inside of the loading ramps * On the approach slope as well as outside on the low-loader platform (from bulkhead to end cross member) each with 12 mm thick and 210 mm wide rubber strips ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Provision for 3 t folding lashing brackets every 600 mm * Each corner front and rear with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air reservoirs, and flange towing eye painted in black shade * Side walls painted RAL 9010 pure white ----Information: * --reinforced and certified body according to EN 12642 XL including load securing certificate-- * Subject to errors and prior sale * New vehicle with manufacturer’s warranty * Sample pictures (vehicle images may differ due to special equipment) Bwjdpfx Aox Ipapjhzsg ----Delivery Time: Vehicle available from week 10 / 2026

Condition: new, maximum load weight: 20,200 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 flatbed: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system, with RTR function * 1st axle liftable * Rear axle with trailing steering function and electro-pneumatic steering lock via PIN reverse gear (trailing axle lock, operable from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at front, mechanical swing-down supports at rear of the chassis * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm, mounted on right side * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the beavertail * Folding rear stanchions Bwodpfjr Dpz Ajx Ahzjg * Steel rear wall slid in front of the rear stanchions * 15-pin electrical socket * LED tail lights * Removable LED beacon incl. bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45 degrees angled, with mounts for 3 t folding lashing brackets * Each corner fitted with 1 x 10 t lashing ring; additionally 2 x 10 t and 3 x 6.3 t lashing rings per side * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable laterally * 4-section hydraulic valve block for potential retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and mechanical landing gear at front painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 13/2026 * Sample images (pictures of the vehicle may differ due to special equipment)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel mudguards, each fitted with spray protection * Reflective contour marking tapes at the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin power socket * 4 stake pockets each side (stakes not included), also suitable for load securing * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, foldable and lowerable, loadable from all directions and embedded in the outer frame – corner rings 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening planks stored in middle of loading area * Digger arm storage from rear axle to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the digger arm storage) * Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Bwjdpfsx Ipavex Ahzjg * Loading height unladen approx. 910 mm (including 860 mm run-up slope) * Chassis, bogie, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Permitted total weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 12/2026 * Sample image

Condition: new, maximum load weight: 20,200 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes Bwedpfx Ahor Dpzxozjg * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * First axle liftable * Last axle as trailing steering axle with electro-pneumatic locking via reverse gear PIN (locking of the trailing axle from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Fixed central drawbar with 50 mm flange eye (loaded 900 mm, vertical adjustment at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, right side * 15-pin electric connector * LED tail lights * Removable LED beacon, incl. bracket and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch / Douglas fir wooden floor * 400 mm slotted steel front wall * Perforated outer frame approx. 45° angled with devices to mount 3 t folding lashing rings * In each corner 1 x 10 t lashing ring, plus on each side 2 x 10 t and 3 x 6.3 t lashing rings * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Errors and prior sale reserved * Available from CW 13/2026 * Sample images (Pictures may differ from the actual vehicle due to special equipment)

Condition: new, maximum load weight: 16,750 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering device * At front wall and rear slope, provision for retrofitting container locks for 20" container transport Bjdpfx Aheq Dyu Uszswg * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear front * External folding supports at rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * Version 21 t GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor in clamped version * At front wall, provision for retrofitting container locks * Bolted front wall made of smooth sheet metal * Split side walls made of steel sheet – trapezoidal profile – foldable with center folding stanchion * Steel rear wall can be slid in between the ramps – holder for stowage inside front wall when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing shackles every 600 mm * Each corner at front and rear with 1 x 10 t lashing ring * Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes for 1.2 t lashing options in front and rear crossmembers * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear entry slope approx. 860 mm chassis height * Drawbar, front wall, rear flap, folding supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paint finish in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 15 / 2026

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * Air suspension with lift and lower system, including RtR valve and manual lower function for loading operations Bwjdpfx Aovin Ucohzjg * Towing bar with positive-locking height adjustment and 50 mm flange towing eye * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox, approximately 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards * 15-pin, 24 V connector * LED tail lights 12 / 24 V mounted in underrun protection * Steel pallet-style 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth sheet metal * Hardwood protection pad for excavator bucket mounted on the front wall * Continuous, fold-down side walls without central stanchion, with drop-side spring assist and swinging via manual central locking * Rear stanchions bolted * Combination steel wing doors – asymmetrically split 2-leaf rear wall, can swing and lock to 270°, non-folding, with additional swinging frame for automatic tailgate opening during tipping operations, locking via galvanized rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open wing doors * Each corner equipped with 1 x 7 t lashing ring, plus 4 x 3 t lashing eyes set into the outer frame on each side * 4 mm steel floor plate * Two-stage step at front left * Rear mounting rail for approach ramps * Approach ramp storage compartment integrated into rear chassis * 1 pair of aluminum approach ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles * --Load securing certificate according to EN 12642 XL? * Chassis, towing bar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports – hot-dip galvanized * Side walls KTL-coated and tailgate painted RAL 9010 pure white * Optional painting of side walls to a specific RAL color available at extra cost * Axles, air tanks, flange towing eye, front landing gear painted in a shade of black * Errors and prior sale excepted * Available from CW 15 / 2026 * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * Air suspension with lift and lower system, including RtR valve and manual lower function for loading operations * Towing bar with positive-locking height adjustment and 50 mm flange towing eye * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox, approximately 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards * 15-pin, 24 V connector * LED tail lights 12 / 24 V mounted in underrun protection * Steel pallet-style 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth sheet metal * Hardwood protection pad for excavator bucket mounted on the front wall * Continuous, fold-down side walls without central stanchion, with drop-side spring assist and swinging via manual central locking * Rear stanchions bolted * Combination steel wing doors – asymmetrically split 2-leaf rear wall, can swing and lock to 270°, non-folding, with additional swinging frame for automatic tailgate opening during tipping operations, locking via galvanized rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open wing doors * Each corner equipped with 1 x 7 t lashing ring, plus 4 x 3 t lashing eyes set into the outer frame on each side * 4 mm steel floor plate * Two-stage step at front left * Rear mounting rail for approach ramps * Approach ramp storage compartment integrated into rear chassis * 1 pair of aluminum approach ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles * --Load securing certificate according to EN 12642 XL? * Chassis, towing bar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports – hot-dip galvanized * Side walls KTL-coated and tailgate painted RAL 9010 pure white * Optional painting of side walls to a specific RAL color available at extra cost Bwodpfevin T Sex Ahzsg * Axles, air tanks, flange towing eye, front landing gear painted in a shade of black * Errors and prior sale excepted * Available from CW 15 / 2026 * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: * Loading platform 6.27 m * Suitable for container transport * Tire pressure monitoring system (RDÜ) * Braking system EBS * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic springs with compensator unit * Height-adjustable drawbar, adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * LED lighting * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stakes, and loading ramps * 50 mm softwood floor * Provision in front of the front wall for retrofitting container locks Bwodpfx Asq Ra D Njhzeg * Bolted smooth sheet steel front wall * Removable trapezoidal-profile steel side walls with drop-down function and sidewall spring lifter * Insertable steel rear wall, can be stowed in the ramp bracket in front of the front wall when not in use * Bolted rear stakes * Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing points every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options * One-piece mechanical loading ramps with spring mechanism for single operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Wheelbase: 990 mm * Tires 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls can be painted in a RAL color of your choice at extra cost * Plastic toolbox * Subject to errors and prior sale * Available from calendar week 09 / 2026

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: * Loading area 6.27 m * Suitable for container transport * RDÜ Tire Pressure Monitoring System * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm * Jost landing gear front support * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * LED lighting * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps * 50 mm softwood floor Bwsdjrvvfwopfx Ahzsg * Mounting provision for subsequent container locks in front of the front wall * Bolted smooth sheet steel front wall * Trapezoidal-profiled steel side walls, drop-down with sideboard spring assist * Steel rear wall, insertable between ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions * Perforated outer frame, bent approx. 45 degrees with 2 t lashing force every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 6.3 t lashing point * Various holes in front and end crossmembers for 1.2 t lashing options * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed down to 20 mm) * Rear approach slope approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side wall paint finish in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost * Plastic toolbox * Errors and prior sale reserved * Available from calendar week ...

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: * Loading area: 6.27 m * Suitable for container transport * RDÜ tire pressure monitoring system Bedoq Ra D Ejpfx Ahzewg * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic springs with balancing unit * Height-adjustable drawbar by 300 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * LED lighting * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and loading ramps * 50mm softwood flooring * Fittings in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Trapezoidal-profile steel drop-side walls, fold-down, with drop-side spring assist * Sliding steel rear wall, can be stored between ramp supports when not in use—internal storage in front of front wall * Bolted rear stanchions * Perforated outer frame bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * In each of the front and rear corners: 1 x 6.3 t lashing point * Various holes in the front and rear beams for 1.2 t lashing points * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side panels painted RAL 9010 pure white * Painting of the side walls in a RAL color available at extra charge * Plastic toolbox * Errors and prior sale excepted * Available from calendar week 09 / 2026

Condition: new, maximum load weight: 16,750 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * TPMS Tire Pressure Monitoring System * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering system * Preparation in front of bulkhead and rear slope for retrofitting container locks for transport of 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front Bedpsl Tihxjfx Ahzswg * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * Design: 21 t gross weight (GVWR) with reinforced frame and reinforced axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamp-mounted * Preparation in front of bulkhead for retrofitting container locks * Bolted front bulkhead made from smooth sheet metal * Split side walls of steel sheet, trapezoidal profiled, folding with center folding stake * Steel rear wall insertable between the ramps - holder for unused position inside front bulkhead * Rear stanchions bolted * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm * Each front and rear corner fitted with one 10 t lashing ring * Load securing package with 2 x 8 t retractable lashing rings each side in the outer frame, multiple holes in bulkhead and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramp with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be compressed down to 20 mm) * Approach slope at rear, chassis approx. 860 mm * Drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tank and landing gear painted in black * Loading height unladen approx. 940 mm * Laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side board color can be freely chosen up to approx. 2 weeks before production date (except metallic and special colors) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 15 / 2026

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, * ETÜ-TA-R 19.0: Bwjdpfspk D Ncox Ahzsg * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11-tonne Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height-adjustable drawbar * Jost support winch at the front * External foldable support legs at the rear * Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis - loading height + 20 mm * 50 mm softwood flooring in clamped design * Fixture in front of headboard for retrofitting container locks * Bolted headboard made from smooth sheet metal * Drop-down side panels made from trapezoidal-profile steel with board side spring assist * Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier * One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized * Axles, springs, air tank, and support winch painted black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side panel painting in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf