Low loader semitrailer

FAYMONVILLE MultiMAX7H

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front Nodohlz S Nopfx Ahbocu •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,200 kg, permissible axle load (axle 2): 11,200 kg, permissible axle load (axle 3): 11,200 kg, loading space length: 14,600 mm, loading space width: 2,550 mm, loading space height: 880 mm, total length: 14,600 mm, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245 / 70 R17.5, color: blue, Year of construction: 2008, Equipment: tail-lift, Color: Blue Load capacity: 72,600 kg Loading platform height: 885 cm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity King-Pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6x 11,200 kg = 67,200 kg GVW: 93,200 kg Empty weight: 20,600 kg Loading capacity: 72,600 kg Axles Axle brand: BPW Air suspension 1st Axle rigid Axles 2 - 6 hydraulic steering Axles 1 & 2 liftable High-low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Max extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm - 925 mm King-Pin height: +/- 1,350 mm Additional Information • Operated on Truck PTO • Lashing rings • Stake pockets • Partly wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • King-pin 3.5" • Central lubrication • Marker boards oversize load • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle Configuration Nsdpfx Ajx R Undshbocu Tire size: 245 / 70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tires; Lift axle; Max. axle load: 11,200 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 11,200 kg; Steerable Weights Empty weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Body brand: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Load capacity: 100,250 kg Weights: King-pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Brand Axles: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Ncedpfxouu E Tie Ahbju Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information Year of construction: 2024 Axle configuration Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Weights Empty weight: 33,750 kg Load capacity: 100,250 kg GVW: 134,000 kg Functional Loading platform height: 105 cm Extendable platform: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Empty weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980mm # BPW axles with disc brakes Njdpjvm Nm Iefx Ahbjcu # 1st axle as lift axle # Jost support feet 24t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # Tires 6 x 445/45 R19.5 branded tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon) # 2 stainless steel tool boxes in the direction of travel right & left # 6x2 Jost container locks, retractable # Stake holder mounted on front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each # Side walls 600mm high & removable including depot under the vehicle # Chassis KTL coated and painted in RAL 3020 # Front wall RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 58,860 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment; complete equipment list available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 500 mm x 8° * 8 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Two-part steel ramps: * Pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramps with hydraulically folding ramp sections * Hydraulic lifting device, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in transport position are not included in the overall vehicle length of 16,500 mm Axles: * BPW axles and suspension, 1st axle steering, 2nd and 3rd axles rigid, 4th and 5th axles trailing steering, air suspension with lift/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually Nedpjy Augwofx Ahbocu * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data is transmitted to the tractor unit via the standardized EBS interface (ISO 11992). For correct readout, the tractor unit must be capable of transmitting and displaying these data. Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (tested to approx. 50 t) Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations; 24 volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure automatically blasted after welding using a centrifugal blasting machine * Second blasting step with corundum grit for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final lacquer with 2 coats of 2-component topcoat, solid color RAL 3002 Carmine Red, compliant with the RAL 841GL system * Rear section metallized and painted RAL 9010 (Pure White) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings mounted on the galvanized connection rail at the front * Bracket for beacon light at the rear of the trailer * Galvanized supports under the loading platform’s rear bevel * Super Grip 2 rubber coating

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) Ncodsyvnfgopfx Ahbou * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: new, overall weight: 58,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, OTHER GÜVEN LOWBED TRAILER? HYDRAULIC RAMPS? STEERING AXLE? OVERSIZE EQUIPMENT? ----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERING AXLE? LIFT AXLE? MOVABLE RAMPS? WIDTH EXTENSION? NEW? MANUFACTURER * GVN-TRAILER – OUR OWN PRODUCTION FROM TURKEY AXLE CONFIGURATION * TRI-AXLE * THIRD AXLE WITH STEERING * WITH LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKES * AIR SUSPENSION BODYWORK * WITH GOOSENECK * EXTENDABLE LOWBED TRAILER, 6 M EXTENSION * ADJUSTABLE KINGPIN, 22 T DIMENSIONS * FROM RAMPS TO KINGPIN (CLOSED): 9.40 M * FROM RAMPS TO KINGPIN: 12.10 M * EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION SECTION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY ADJUSTABLE LEFT AND RIGHT EQUIPMENT * AIR SUSPENSION * LASHING EYES FOR LOAD SECURING * PREPARATION FOR OVERSIZE TRANSPORT * TOOLBOX TYRES * TYRE SIZE: 235/75 R17.5 * TWIN TYRES WEIGHTS * CURB WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 58,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICALLY PERMISSIBLE GROSS WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN THREE-AXLE LOWBED TRAILER WITH LIFT AND STEERING AXLE (3RD AXLE), AIR SUSPENSION, AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE SEMI-TRAILER WITH 6 M EXTENDABLE SECTION AND ADJUSTABLE KINGPIN. HYDRAULIC, SWIVELING RAMPS AS WELL AS OVERSIZE TRANSPORT PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY DUTY TRANSPORT. ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ---- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER); 5 DAYS, 30 DAY REGISTRATION PLATES, AND 17-21 DAYS AUSTRIA REGISTRATION EURO 1 Ncsdpfx Ahoylfmfebeu VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 is required. (For sales to the EU and third countries a deposit/guarantee of at least €500.00 / €1,000.00 applies) Subject to changes, errors, and prior sale! More vehicles can be found on our homepage: Sales are executed exclusively according to our general terms and conditions – see homepage Important notice – Important information: Despite careful verification of all the details in our offer, mistakes may occur. Some may result from transmission errors in the systems of various platform providers. Therefore, all information is provided without guarantee and does not constitute any legal claim. Legal Notice: This sale advertisement is not an offer in the sense of §145 BGB. Rather, it serves as information for the initiation of a contract. The details provided here are without guarantee and do not represent warranted characteristics.

Condition: used, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 06/1998, Equipment: ABS, Vehicle Identification Number: XL952N5SAWL007036 Fifth wheel load: 20,000 kg - Axle loads: 5 x 10,000 kg Unladen weight: 13,100 kg RO HU due Gooseneck: 4,100 mm Saddle height: 1,250 mm Lowbed: Length: 9,200 mm (650 mm tapered section) -- Width: 2,525 mm -- Loading height: 880 mm EXTENDABLE by 6,200 mm WIDENABLE to 3,000 mm Hook-on rails Technical axle loads 5 x 10,000 kg SAF axles with drum brakes AXLES 1, 2 = LIFTABLE Axles 5, 6 = SELF-STEERING Tyres: 235/75 R 17.5 Specifications, intermediate sale, and errors subject to change without notice. This description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the purchase contract is authoritative. Ncodpfx Aeyx N Dvehbou Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide a quote from our partner workshops! The vehicle may have advertising decals and/or inscriptions. Our general terms and conditions of delivery and payment apply.