Used Other Semitrailers With Work Platform for sale (100)

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Bedpowx Dctjfx Agmodh Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, maximum load weight: 10,540 kg, overall weight: 18,000 kg, axle configuration: 1 axle, first registration: 05/2009, next inspection (TÜV): 01/2025, loading space length: 11,000 mm, loading space width: 2,500 mm, Year of construction: 2009, Equipment: ABS, German vehicle / German registration documents Our offer generally does not include inspection/technical check and registration. Errors and prior sale excepted. Viewings are only possible by appointment. Internal number: 905 We speak German and English. Opening hours: Bdedpfx Ajwb Rwijgmoh Monday 8:00 AM - 5:00 PM Tuesday 8:00 AM - 5:00 PM Wednesday 8:00 AM - 5:00 PM Thursday 8:00 AM - 5:00 PM Friday 8:00 AM - 12:00 PM

Condition: used, empty load weight: 8,450 kg, maximum load weight: 26,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2007, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Hangler platform semi-trailer, 3 axles | steering axle | BPW axles with disc brakes | GVW 35,000 kg | spare wheel holder + spare wheel | toolbox | extendable by 3 metres | tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Bsdpfswz Ekkjx Agmsdh

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 Bodpfx Agsyz E T Somodh * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: used, maximum load weight: 32,050 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2009, next inspection (TÜV): 02/2021, loading space length: 11,840 mm, loading space width: 2,500 mm, loading space height: 400 mm, Equipment: ABS, * Lift axle (high mount) * Air suspension * Disc brake Bedpez Dm Dfsfx Agmodh * Unladen weight: 5950 kg * Brakes * Aluminum rims ----Internal vehicle number: 9786-----Errors and prior sale excepted.

Condition: used, maximum load weight: 29,075 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 01/2027, total length: 13,820 mm, total width: 2,550 mm, total height: 3,277 mm, Equipment: ABS, Krone Steel Platform Trailer * Krone axles with air suspension and disc brakes * 1st axle can be raised * Pallet box * Stanchion pockets Bsdpszp Abaefx Agmedh * Stanchions + holders * Perforated strip * Tie-down straps * Storage box * Overwidth signs * 385/65 R22.5 tires * Spare wheel holder We are happy to provide you with further information.

Condition: used, maximum load weight: 29,210 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,620 mm, loading space width: 2,490 mm, Equipment: ABS, Panav NP035 LowDeck Original platform First registered 03/2017 1 and 3 axles are lift axles BPW axles Disc brakes ABS Tires 385/55 R19.5 Condition: Axle 1: 9 mm and 5 mm tread depth Axle 2: 9 mm tread depth Axle 3: 14 mm tread depth Operating weight 5790 kg Total weight 35,000 kg. Bdedpfxszwr Hue Agmoh

Condition: used, maximum load weight: 33,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 01/2027, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, Extendable semi-trailer, overall length adjustable from 7700 mm to 21300 mm, 9 stake pockets per side, 9 lashing points per side, all-round warning light / rear and center, extendable warning signs, JOST support jacks, central lubrication system, continuous underfloor box, ABS, EBS, SAF axle(s), last axle steered, drum brake system, air suspension with lifting and lowering mechanism, vehicle can be covered with advertising and/or lettering. SI86996 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. Bdedpfx Agszw Sgbemeh We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Bjdsy Trwujpfx Agmjdh Rear wall: * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights *

Condition: used, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,500 mm, Equipment: ABS, Due to the large number of phishing and spam emails, we can only process email inquiries if you provide your valid phone number! Unfortunately, we cannot process email inquiries without a phone number. We ask for your understanding! For telephone inquiries and WhatsApp, please specify: * Open platform * German semi-trailer * Lift axle * Multilock outer frame * ROTOS Schmitz axles with disc brakes * Air suspension with lifting/lowering system Bsdszzuyrjpfx Agmsdh * Unladen weight: approx. 5,000 kg * Tires: 385/65 R 22.5 * Tread depth: 8/5, 14/8, 12/8 mm Errors and prior sale excepted.

Condition: used, overall weight: 23,000 kg, axle configuration: 2 axles, first registration: 05/2019, next inspection (TÜV): 10/2026, loading space length: 7,014 mm, loading space width: 2,240 mm, loading space height: 579 mm, Equipment: ABS, * SAF axles * Storage box * Platform * Drop sides (600mm) * Unladen weight: 4,800 kg * Main inspection: 10.2026 * Safety inspection: 04.2026 -----Internal vehicle number: 11330----Errors and prior sale excepted WhatsApp support available! Bjdpfx Aexiur Djgmsdh If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 33,473 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2009, next inspection (TÜV): 06/2027, loading space length: 13,620 mm, loading space width: 2,500 mm, Equipment: ABS, Due to the large number of phishing and spam emails, we can only process email inquiries if you provide your valid telephone number! Unfortunately, we cannot process email inquiries without a telephone number! We ask for your understanding. Bedpezuivnsfx Agmedh For telephone inquiries and WhatsApp, please contact us regarding: * Platform with 8 pairs of pocket recesses * German-made semi-trailer * First owner * ROTOS Schmitz axles with disc brakes * Air suspension with lifting/lowering system * Unladen weight: approx. 5,527 kg * Tires: 385/65 R 22.5 * Tread depth: 7/7, 8/11, 6/9 mm Subject to errors and prior sale.

Condition: used, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 06/2014, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 7566 Fliegl SZS 270 German registration / single owner First registration: 24.06.2014 Technical gross weight (kg): 27,000 Permitted total weight (kg): 25,000 Curb weight (kg): 5,100 VIN: WFDFLT22701003772 TIRES AND AXLES: Tires: 205/65 R 17.5 Axle configuration: 2 SAF axles Air suspension Drum brakes Bjdox Ep Eyspfx Agmsdh BODY: Internal dimensions: Width (m): 2.48 Length (m): 9.21 + Side panel height (m): 0.58 VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) German vehicle approval form M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held liable for any errors or omissions. We kindly request that our customers consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as-is, in their current condition. We invite customers to visit our facility to personally inspect the vehicle’s condition. Furthermore, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer prefers new batteries, we are happy to provide pricing information.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles Bedpfxjzz Umxe Agmodh * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2026, Equipment: ABS, available for immediate delivery SADDLE PLATFORM CONSTRUCTION MATERIAL KÖGEL 3-axle SN24/ BW 800 mm/144 x rung pockets STEERABLE manufacturer: KÖGEL registration date: NEW VEHICLE 2025 dimensions: 13620 x 2480 x 800 permissible total weight: 35000 kg unladen weight: 6490 kg axle load 15000 kg air suspension, raise/lower function disc brakes ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 3 / NEW lift axle steerable axle trailing arm steering screen-printed floor side boards: 5 pairs 800 mm folding stanchions: 3 pairs lashing eyes tool box paint finish, body: silver paint finish, chassis: black tire configuration: 6 tire condition: 100% rear tires: 385 / 65 R 22,5 IDEAL CONSTRUCTION MATERIAL SADDLE with 800 mm side boards, 5 pairs with 21 pairs of lashing eyes, each with 2500 kg lashing force with 8 x 18 RUNG POCKETS 80 x 80 can also be used as lashing eyes? 7200 kg stable floor? lift axle / STEERABLE AXLE BPW ECO DISC 430 mm vehicle can also be operated as a platform. MULTILOCK OUTER FRAME, 2 tons lashing force each LASI 12642 XL with TRAILING ARM STEERING AXLE (friction-steered) NEW!!!! front bulkhead now made of aluminum, 2000 mm high TPMS tire pressure sensors now in the rims?… example images Bjdpeulqr Ejfx Agmodh all information without guarantee, subject to prior sale! if you have any questions about this or other vehicles, please call us. if you have any questions for this or another trailer/car please call us.

Condition: used, maximum load weight: 32,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, next inspection (TÜV): 05/2027, loading space length: 13,630 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3 - Axle Schwarzmüller S1 Platform Trailer VIN: H484008 Chassis / Components: * Air suspension // Raising and lowering * Lift axle / Steerable axle * Jost Optima support legs * 3 x SAF axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 90%, Middle approx. 80%, Rear approx. 90% * Coupling height approx. 1140 mm * Spare wheel holder * 2 x PVC storage boxes Schwarzmüller * 2 x Rotating beacons on the underrun protection Superstructure: * Platform trailer for timber transport * 8 x stanchions per side, removable plug-in stanchions * 8 x stanchion pockets on the front wall * Front wall height 2,500 mm * Multilock * Slotted rail with lashing eyes 3,500 kg Weights: * Gross vehicle weight: 39,000 kg * Unladen weight: 6,350 kg * Payload: 32,650 kg Other: * German vehicle * MOT and safety inspection valid until 11/2026 ---- New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Bdedpfxszwrhlj Agmoh See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day passes / Export license plates We will gladly help you in obtaining export license plates/short-term license plates.

Condition: used, maximum load weight: 61,420 kg, overall weight: 75,000 kg, axle configuration: > 3 axles, first registration: 10/2017, loading space width: 2,520 mm, Equipment: ABS, ? German trailer, valid TÜV until 06/2027? Gross Vehicle Weight (GVW): 75.0 tons. ? Netherlands: 61.40 tons. ? 5-axle ballast trailer ? Hydraulically steered axles (turntable) ? Cable remote control ? 23 lashing points + 12 pocket slots per side ? Hydro-pneumatic suspension Bedpfsz Exh Eox Agmodh ? 1st axle can be lifted ? Spare wheel holder ? Rotating beacon ? Drum brake ? ABS ? 1 x storage box ? EBS ? Support legs ? Twin tires ? SAF axles All information without guarantee / subject to prior sale.

Condition: new, maximum load weight: 29,731 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,580 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer K.SPS platform semi-trailer Immediately available Technical data: * Outer length 13,640 mm * Internal length 13,580 mm Bdodoqbn R Nopfx Agmsh * Axle distance 1,310 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Inner width 2,480 mm * Gooseneck 200 mm * Semi-mounted height 1,180 mm * Axle load 27,000 kg * Kingpin capacity 12,000 kg * Total weight 39,000 kg * Unladen weight 6,269 kg * Pallet capacity 33 Euro pallet load capacity Chassis: * BPW axles with air suspension and disc brakes * 1st axle can be lifted automatically * Wabco brake system * 6 tires 385765 R22.5 * Axle pressure gauge Chassis: * Made of high-quality and durable steel * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * Hardwood-coated, 30 mm thick and waterproof hardwood floor, which can take an axle load of 7,200 kg in accordance with DIN EN 283. * Jost supports * LED lighting * Load securing. * K-fix has 96 holes per side, each lashing point has a load capacity of 2,500 kg * Additional 7x2 lashing rings placed on the floor with a load capacity of 5,000 kg * 6x2 container locks suitable for 1x20 ft in the middle, 2x20 ft, 1x40 ft containers * Stake pockets outside + on the floor * Stake box under chassis * Load securing certificate according to standard EN 12642 CodeXL Miscellaneous: * 1x stainless steel toolbox * 4x extra wide boards with LED lighting Chassis color: MB 7350 nova grey For further information please do not hesitate to contact us

Condition: used, maximum load weight: 29,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2005, loading space length: 13,520 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, 3-Axle Dinkel Drop-Side Semi-Trailer VIN: D17042 Chassis / Attachments: * Air suspension // raising and lowering * 3rd axle forced steering * Jost landing legs * 3 x Daimler-Benz axles with disc brakes * Tyres: 445/40 R22.5 * Remaining tyre tread: Axles 1 & 2: approx. 60%, Axle 3: approx. 70% * 2 x PVC storage boxes * Forklift bracket * 4 x extension boards Body: * Drop-side semi-trailer * Forklift bracket Weights: * Gross weight: 36,000 kg * Unladen weight: 6,900 kg * Payload: 29,100 kg Miscellaneous: * German semi-trailer ---- New main inspections, safety inspections, or upgrades/downgrades of permissible weight are available on request. We are happy to assist you in obtaining export/transfer license plates, and can also provide delivery of your purchased vehicles within Germany. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to changes, prior sale and errors! --- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On a 11,000 m² lot, we offer a wide range of vehicles. Our company philosophy is defined by fairness and integrity. As customer satisfaction is very important to us, we provide an excellent all-inclusive service package, assigning you a dedicated contact person to assist you with purchasing or selling your vehicle. See for yourself! Our services for you: Loading vehicles: We are happy to help you load your purchased vehicles. Bdedpjy N Hvwofx Agmsh Organising special transports: We are happy to assist you in organising special transports. Temporary/export license plates: We are happy to assist you in obtaining export or temporary license plates.

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmitz Cargobull SPL 24/L-13.62EB Platform Trailer * Platform semi-trailer * Front wall, 1,200 mm * 12 container locking devices / twist locks: 1 x 40 ft, 2 x 20 ft and 1 x 20 ft * Continuous lashing points in the outer frame * 4 extendable warning signs with position lights * Longitudinal beam height at the front: 156 mm, at the rear: 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pole DIN ISO3731+DIN ISO1185+ ISO12098 * 8 pcs. additional lashing beam pockets in the center of the 8 t floor, for lashing beam 70/70 * 8 pairs of additional lashing beam pockets with lashing beam securing in the outer frame for lashing beam 70/70 * Strength per additional lashing beam: up to 400 kg at a height of 1 meter * 1 row of lashing beam pockets 70x70 across the load securing, approx. 2600 mm in front of the front wall * Open storage box on top for additional lashing beams * Lashing points: 16 pairs, 4 tons tensile force per eye, according to EN 12640 * 28 mm plate floor, max. 8000 kg forklift axle load, strength test according to DIN EN 283 * Air suspension * Air control system * Lift axle * Disc brakes Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Bdodpfjt Dhfmex Agmoh Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and thus does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 37,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 06/2010, Platform B = 12,000 18 t fifth-wheel load, 3-axle semi-trailer Turning radius 2,300 mm to the rear Loading length 13,500 mm, loading width 2,550 mm Bodpezci Saofx Agmsdh Loading height 1,370 mm SMB axles Last axle liftable Air suspension Lashing rings 3 rows of stake pockets

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Bsdpfx Asyvnd Nsgmsdh Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: new, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details ? Loading area length: 13,620 mm ? Loading area width: 2,480 mm ? Fifth wheel height: 980 mm ? Multilock outer frame, universal load securing option every 100 mm _____ Axles/Tires ? BPW axles ? Air suspension ? Wheelbase: 1,310 mm Bdedpfon Hrtksx Agmoh ? Brake discs (370 mm diameter) ? Wheel nuts with protective caps ? 1st axle as lift axle ? Tire monitoring system ? Odometer _____ Attachments ? Toolbox ? 10 pairs of 81 x 81 mm stake pockets in the outer frame ? 15 pairs of Multi-Lash lashing rings ? 10 stake pockets, 81 x 81 mm, centered in the floor ? 12 insert stakes, total length approx. 1,950 mm ? 12 pillars, total length approx. 1,950 mm ? 30 mm thick, waterproof floor panel _____ Accessories ? 2 overhead marker signs including marker light ? Pillar storage on the left side for 12 pillars _____ Lighting ? Multifunctional taillights (Hella) ? 2 LED license plate lights ? LED side marker lights with flashing lights ? Rotating beacon (orange) ? Including 1 reversing light _____ Paintwork ? Chassis: RAL 9005 - jet black ? Rims: natural silver ? Landing gear: RAL 9005 - jet black ? Axles: RAL 9005 - jet black ? Bulkhead: RAL 7035 - light gray

Condition: used, maximum load weight: 36,140 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members * Designed for high point loads * Underrun protection, width approx. 700 mm * Outer frame as a UNP profile * Wear plate approx. 8 mm * Kingpin height at the front approx. 130 mm * Towing device: 2-inch kingpin * Underrun protection: bolted design, according to EC; side impact protection: according to EC, made of aluminum profiles * Anodized * Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side Axles: * 3 x 9 t air suspension axle units * Disc brakes 22.5, total travel approx. 180 mm * Raising and lowering device via rotary slide valve Braking System: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Interlocking coupling heads permanently mounted on the front cross member * Without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120 * Manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN bus system of the EBS Load Securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes are provided every approx. 400-600 mm for attaching lashing straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed sheet metal (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights, white at the front * LED outline lights at the rear * License plate lights * Lane-keeping lights, LED. 1x15-pin and 2x7-pin connectors on the front cross member Equipment: * Rear right-hand side, folding and extendable access ladder (without platform) Bjdpfx Ageztuacomsdh * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paint Finish: * Front wall: RAL 3002 carmine red * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 3002 carmine red Including additional equipment: * First axle liftable, with fully automatic * Load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets transverse to the loading area * 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in stakes * Container locking for 1 x 40? and 2 x 20? containers, flush at the rear. Container locking for 1 x 20? container in the middle * Work light on the lamp carrier (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, one on the left and one on the right

Condition: used, overall weight: 20,000 kg, axle configuration: 1 axle, first registration: 08/1984, * Forced steering * Air suspension Bedpfx Agswip Ddsmedh * Storage box * Unladen weight: 4,500 kg -----Internal vehicle number: 9797----Subject to errors and prior sale.