Low loader semitrailer

Faymonville 4-1+3-A-Tele-Semi-Radmul.-Rampen-Gummibe

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) Bwodpfx Aewta Aljdwew * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge Bodpfxow Etd Tj Adwjww - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Bwjdpfx Aexv Ry Rjdwsw The Wattsnew E-Box concrete mixer is an electrically powered concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and powers the existing hydraulic pump as usual. Everything remains the same, except that the hydraulic pump is driven by an electric motor instead of an internal combustion engine. You can also easily convert your existing concrete mixer trailer to electric power by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box consumes little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very easy. After a day's work, simply connect the E-Box to a charging station or a standard power outlet, and the batteries will be fully charged in five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel emissions, so you can work in a clean and safe environment. Your neighbors will also appreciate that you are using an emission-free and quieter machine. The use of electric vehicles and machines in the construction industry increases the chances of winning contracts. Customers and governments are increasingly demanding emission-free machines. For more information: / = Further Information = General information Year of manufacture: 2024 Design year: 2024 Applications: Construction and road construction Usable material: Concrete License plate: OT-93-FF Axle configuration Tire size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg GVWR: 43,000 kg Functional Brand of body: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request = Company Information = You can find our complete range here: /

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and Bwjdpek Unitofx Adwow sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: new, overall weight: 36,000 kg, axle configuration: 2 axles, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, lfd 12053 STEEL TRUCK 25 m³ SCHWARZMÜLLER 2-axle HARDOX TRUCK / HEAVY DUTY /25 m³ 5 mm make/manufacturer: SCHWARZMÜLLER EZL: NEW VEHICLE dimensions: 7650 x 2330 x 1470 volume: 25 cbm. permissible total weight: 36000 kg empty weight: 5540 kg load capacity 18000 kg air suspension disc brakes Bsdpsvuip Esfx Adweww ABS EBS fifth wheel height 1300 axle make: SAF HD 430mm lift axle tarpaulin tarpaulin color: silver body paintwork: 7001 silver gray chassis paintwork: 7021 black gray tires: 4 ply tire condition: NEW tires HA 385/65 R 22.5 HEAVY DUTY STEEL TRUCK with HARDOX STEEL floor 5 mm side wall 4 mm for gravel or excavated earth! rear flap !!!!! 15 + 2 x 7-pin socket at the front HD 250 bar cylinder with central grease nipple SAF disc 430 mm reinforced axle LIFT AXLE fully automatic / starting aid also via switch 15 pin = pin 12 / 7 pin = pin 6 automatic lowering when tipping (via switch on/off) platform / roll tarpaulin 1300 mm ash / Schwarzmüller telematics installed all information without guarantee, subject to prior sale!! if you have any questions about this or another trailer / car please call us. if you have any questions for this or an other trailer / car please call us.

Condition: used, mileage: 294,049 km, power: 353 kW (479.95 HP), first registration: 03/2008, fuel type: diesel, tire size: 385/55R22.5, tire condition: 25 %, axle configuration: 8x4, wheelbase: 5,100 mm, fuel: diesel, brakes: retarder, gearing type: semi-automatic, number of gears: 12, suspension: air, total length: 9,200 mm, total height: 3,000 mm, loading space length: 6,800 mm, Equipment: air conditioning, retarder, tachograph, = Additional options and accessories = - Digital tachograph - Visor = Remarks = full air 8x2 retarder 294000km place for crane Bwodsz Nubwopfx Adwjw = More information = Technical information Engine capacity: 11.700 cc Axle configuration Tyre profile: 25% Suspension: air suspension Front axle 1: Tyre size: 385/55R22.5; Steering Front axle 2: Tyre size: 385/55R22.5 Rear axle 1: Tyre size: 315/70R22.5 Rear axle 2: Tyre size: 315/70R22.5 Weights Empty weight: 23.200 kg Carrying capacity: 8.800 kg GVW: 32.000 kg = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: used, axle configuration: > 3 axles, Year of construction: 2009 Bwedpfx Ajzhu A Hsdwsw Empty weight: 16.800 kg Carrying capacity: 54.200 kg GVW: 71.000 kg

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, Equipment: ABS, - Air suspension Bwsdpsym Tacsfx Adwew EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP 10 cbm mixer semi-trailer - New - 2-axle - SAF axles - 1x lift axle - air suspension, ABS - Tires 385/65 R22.5 - Total weight approx. 36,000 kg - Tare weight approx. 7,640 kg - Separate motor EuromixMTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox, manufacturer: ZF P5300 Hydraulic pump, manufacturer: Bosch Rexroth Hydraulic motor, manufacturer: Bosch Rexroth Oil cooler system integrated Mixing control, mechanical and start/stop, electric Compressed air water system Water connection on the platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service flap Access ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge pan and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mudguards made of steel over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500l (compressed air) Water tank, steel Shut-off valve mounted below the water tank in the filling line Water connection, "C" coupling Operation & Electrical Mixer operation - mechanical, at the rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Optional equipment: Extension chute, plastic - steel - aluminum Folding chute, plastic (or steel) Retaining flap, swiveling chute Plastic box Dust box, stainless steel Additive tank, non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underrun protection with handrail Water meter Pressure gauge Your advantages: • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts: • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of manufacture: 2026 Usable material: Concrete...

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SLAR3 Tele Lowboy Trailer with Wheel Recesses Technical Data: Model and Manufacturer: Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable, wheel recess lowboy trailer, suitable for the transport of vehicles and heavy machinery. Dimensions: * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Overall width: 2,550 mm (expandable by 600 mm via side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle distance: 2,260 mm Weights and Load Capacities: * Permissible total weight: * 52,800 kg at 60 km/h * 48,000 kg at 80 km/h * Tare weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tons per axle) * Fifth wheel capacity: 18,000 kg Axle Configuration: * Number of axles: 3 (2 fixed axles at the front, 1 trailing axle at the rear) * Lift axle: Manually controlled, load-dependent (1st axle) * Axle material: BPW axles with drum brakes Tires and Rims: * Tire size: 245/70 R17.5 * Tire brand: GOODYEAR * Tire markings: M+S label and 3PMSF marking * Tire pressure monitoring system: Increases fuel efficiency and extends tire life * Number of rims: 12 pieces (steel rims with offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Two-line pneumatic brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability program) Lighting and Electrical System: * Lighting system: 24V, multi-chamber lights by ASPÖCK, side markers, and rear lights in LED * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps: * Ramp type: Folding hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp surface: Made of hardwood * Safety devices: Ramp protection chain included Load Securing: * Tie-down points: * 2 x 2 with a load capacity of 5,000 daN each * 1 x 2 with a load capacity of 10,000 daN on the gooseneck * 4 x 2 tie-down points with a capacity of 6,000 daN in the platform area * Container lock housings: Suitable for the transport of 1 x 20 FT or 1 x 30 FT container Bodsx Epaqepfx Adwjww * Stake pockets: 5 x 2 stake pockets (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor covering: 45 mm thick hardwood floor and steel floor with a drop-pattern structure * Wheel recess bridge: Bridges made of split hardwood pieces with sheet metal supports to cover the wheel recesses * Tool box: PVC-coated steel, dimensions 750 x 400 x 360 mm Colors: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the support surfaces Condition: New and ready for immediate use. * Perfectly suitable for heavy transport and for use in the construction industry or for relocating machinery.

Condition: used, mileage: 201,000 km, power: 353 kW (479.95 HP), first registration: 09/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, IVECO X WAY 480 TIPPER / 8x4 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2023 ? MILAGE: 201 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH ? RETARDER CAPACITY: 20 000 kg TOTAL WEIGHT: 32 000 kg TIRE SIZE: 13R22,5 WHEELBASE: 187/237/138 cm SUSPENSION: SPRING TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Bwodpfx As Afbcrodwsw RADEK - ????? : 62949