Used Müller-Mitteltal Kwh Trailers for sale (251)

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low loader | Flatbed Overrun Trailer Reference number for inquiries: 11630 Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, net payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety system using ramp retaining rods and diagonal supports * Version with 21t gross weight: reinforced frame and axle, axle spacing 1,810 mm Nsdpfxeyvxg Ue Aazocr * Floor height approx. 910 mm loaded / approx. 940 mm unladen * 7m loading bed with 400 mm high front wall * Extended ramps: 3m hot-dip galvanized, one-piece ramps with galvanized grating * Ramp assist system with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV-compliant folding lashing brackets (LC 8,000 daN) installed into existing 45° outer frame hole pattern, positioned approx. 1m in from front and rear crossmembers * 10 UVV-compliant retractable lashing brackets LC 3,000 daN in outer frame's existing hole grid * 2 UVV-compliant retractable lashing rings at front & rear in crossmembers (LC 10,000 daN) * Additional lashing points via drilled holes (Ø 50 mm, LC 1,200 daN) in front and rear end crossmembers * Prepared for retrofitting container locks (container locks available and optional at extra cost) * Softwood floor, 50mm thick * Gigant axles with air suspension including EBS 2S/2M, ride height control (raise/lower) * 235/75R 17.5 (8x) twin tyres with tire pressure monitoring sensors * Plastic toolbox mounted in front of front wall, right-hand side (in the direction of travel) * LED lighting system * 7-pin socket on rear, wired for marker/oversize lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning board * 1 removable all-round amber LED beacon with holder and installation * Folding rear supports, front support leg with gear winch ---- Example lease offer from our partner MMV Leasing: €655/month net, 60-month term, zero down payment, zero final residual payment Other terms possible, with/without down payment and/or residual value! We are official Müller-Mitteltal representatives ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours by appointment! Languages spoken: German, English, Russian, Polish, French WhatsApp available

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Ncjdpfxex Ipa Nj Aazor * --Technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: Ncjdpfxjx Ipavo Aazjr * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalizer at rear * Side underrun protection * Swivel support legs at the rear on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender skirts, each with splash guards * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can be used for load securing * Load-securing package consists of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings to the side in the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a shade of black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, maximum load weight: 16,950 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2006, next inspection (TÜV): 04/2026, Year of construction: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires Nodpfx Aasyv Ug Dszjcr * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted We offer: Net purchase for EU businesses with VAT ID as well as clients from non-EU countries. Leasing and financing available. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. All prices listed on classifieds are gross prices and already include 19% VAT.

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at rear ----Axles: * 3 x 11 t Gigant axles Nodpfxstplv To Aazjcr * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Tool box made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side impact protection * Plastic quarter mudguards with splash protection * Plastic rear underrun protection bumper * Mechanical drop-down supports at rear ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised side rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in turntable area * For roll-off container transport, container length 5,500–7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * 8 repositionable skip stops for lateral centering, front 4 skip stops in place with oscillating stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tie-down aids to secure the skips positively and non-positively * Four cloverleaf lashing lugs on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the running path area of the ramp * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable stowage compartment accessible from the rear) ----Tyres: * Tyre size: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear reflective contour tape * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Info: * Technically permissible gross weight: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to error and prior sale ----Delivery time: * Available from calendar week 20/2026

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-bed Trailer / Drive-over Flatbed Trailer Enquiry No.: 27963, available end of March 2026 NEW VEHICLE incl. COC (Certificate of Conformity) * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Flatbed design with 400mm high front wall, ramp securing via ramp holding rods and diagonal supports * Version: 21t gross weight, reinforced frame and axle, axle spacing 1,810 mm * Bed height approx. 910 mm (loaded) / approx. 940 mm (unloaded) * 7,000 mm loading area with 400 mm high front wall * Extended ramps: 3,000 mm, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lifters with vertically positioned, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop lashing rings (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame, positioned approx. 1m from the front and rear end beams * 10 UVV retractable lashing rings (LC 3,000 daN) recessed in the existing hole grid in the outer frame * 2 UVV lashing rings each front and rear, recessed in the end crossmember (LC 10,000 daN) * Additional lashing points via drill holes (Ø 50 mm, LC 1,200 daN) in the front and rear end crossmembers * Prepared for retrofitting container locks * 50mm thick softwood floor * Air suspension, Gigant axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) dual tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, right-hand side (in direction of travel) * LED lighting system * 7-pin socket at rear, wired for over-length lighting with rear light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning sign Ncodpfx Aajyuq R Uezor * 1 removable round LED beacon incl. holder and installation * Folding supports at rear, jockey wheel at front with gear winch ---- Lease purchase example from our partner MMV Leasing: €655/month net at 60 months without down payment and "0" euro final payment Other terms with/without down payment/final value possible! We are an official Müller Mitteltal dealer ----* Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Condition: used, maximum load weight: 30,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 11/2002, Equipment: ABS, * MüllerMitteltal low-loader 4-axle T40 * 2x steered turntable axles * German trailer * Pen * Hydraulically adjustable ramps / left-right * Split foldable ramps * Extendable * ABS * BPW axles * 40 t * Unladen weight: 9,300 kg * Axle load: 10 t per axle * Fully functional * Tyres in good condition Ncodpfx Aasyuri Eozjr

Condition: used, maximum load weight: 10,960 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 03/2027, loading space length: 5,000 mm, loading space width: 2,500 mm, loading space height: 1,100 mm, total width: 2,550 mm, Loading length: 5,000 mm Nodpfsytma Ajx Aazecr Width: 2,550 mm / Loading width approx. 2,500 mm Loading height: approx. 1,100 mm Further information: - Steel construction - Hot-dip galvanized - Aluminium loading ramps - Ramp storage compartment - 500 mm drop sides, foldable - Drop side springs - Gigant axles - Tyres 285/70R19.5 - Height-adjustable drawbar - Support legs front and rear - Plastic toolbox - Front access step

Condition: used, maximum load weight: 17,290 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 07/2026, loading space length: 8,900 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS * 5-chamber tail lights * Orange rotating beacon * Duomatic air coupling * BPW ECO axles ----Superstructure: Low-bed trailer, galvanized frame (1900+7000mm)/loading height approx. 900mm, rear end sloped/loading ramp height approx. 770mm, steel/wooden floor, extendable to 3 meters, hydraulic drive-on ramps (galvanized) with anti-slip coating, ramps also hydraulically side-shiftable, lashing rings Nedpsyulu Ujfx Aazjcr Sale only to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice for details).

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering function and RtR valve * Smard on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at rear * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel and spare wheel holder, basket design, right side * Front: closed single fender made of plastic * Rear: straight steel mudguards with spray protection (anti-spray device) * Side underrun protection * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above turntable platform: 50 mm, in low-loader platform: 60 mm softwood * Outer planks of the ramp made from hardwood * 4 stake pockets on each side (no stakes included), each offering 2 t lashing option * Load securing kit consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform * Each front and rear side: 2 pairs of 13.4 t lashing rings on the outer frame, as well as 4 pairs per side of 10 t folding and lowerable lashing rings * Loadable from any direction and recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the side in the excavator arm storage * 8 pairs of galvanized folding outriggers for 3 m overall width (not at the rear slope) * Widening planks stowed on the left in a storage compartment * Excavator arm storage above the rear axle up to end of access slope approx. 2,100 x 740 x 190 mm Ncodpfxel Tphrj Aazsr * Mechanical rear drop supports * Hydraulic folding ramps with hydraulically adjustable tapered section, approx. 4,650 x 720 mm, incl. hydraulic side ramp displacement & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded platform height: approx. 890 mm, +/- 20 mm (including 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0: * EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel splash guards, each fitted with spray protection * Reflective contour markings on the sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at the rear * Towing bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each also equipped with lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 6 pairs of UVV swing-down and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t load capacity at the corners and 10 t elsewhere * 6 pairs of mechanical folding outriggers for a total width of 3 m (not on the rear chamfer) * Widening planks stored in the center of the loading area Ncsdpfxel Th Nne Aazjr * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp shift * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black * 235/75 R 17.5 twin tires * Curb weight approx. 5,980 kg * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from calendar week 11/2026

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning plate packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear reflective contour tape * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Coupling arm with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power connector * Four stake pockets per side (no stakes included), with integrated lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of swiveling and lowerable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stowed in the center of the loading platform * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach angle) Nedsl Th I Aepfx Aazocr * Chassis, turntable, towing arm and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 11/2026

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders Ncodpfxjl Tik No Aazjr * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Condition: used, maximum load weight: 17,500 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 09/2005, next inspection (TÜV): 01/2027, loading space width: 2,500 mm, ? Hydraulic ramps Nodpfeytz Hwox Aazocr ? Extendable ? 8 lashing points per side ? Spare wheel holder ? Loading height: approx. 930 mm ? Drum brake ? Duomatic coupling ? Leaf suspension ? Twin tyres All information subject to change / Prior sale reserved.

Condition: used, machine/vehicle number: GE11/142/2022, empty load weight: 6,350 kg, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2008, loading space length: 8,500 mm, loading space width: 2,500 mm, suspension: air, Very well-maintained vehicle from first owner Nodpfxen Aw Hko Aazjcr Three-axle low-loader trailer Low-loader with drive-up ramp Heavy-duty transport Model T3 Komakt 30.0 Length 8,500 mm Width 2,500 mm Air suspension Commercial/export net price – €15,990 Subject to changes, interim sale, and errors ===== Phone2 Mobile =====

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension * Mechanical rear axle equalization * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels at front and rear * Front closed plastic mudguards and rear straight galvanized steel side skirts, each with spray protection * Reflective contour tape on sides and rear * Foldable lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant folding and lowerable lashing rings, loadable in all directions and recessed into the outer frame – in the corners: 13.4 t, otherwise 10 t. * 6 pairs of mechanical folding outriggers for a total width of 3 meters (not on the rear slopes) * Widening planks stored in the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) Ncsdpfox Ipbgjx Aazsr * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical gross weight of up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf at the A7

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear Ncjdsx Ipb Hjpfx Aazor * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes provided), each also suitable as lashing points * Load securing package including: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame—13.4 t in corners, otherwise 10 t * 6 pairs of mechanical swing-out extensions for 3 m overall width (excluding the rear slope) * Widening boards stored in the center of the loading area * Excavator arm rest above rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2028, Year of construction: 2012, Internal vehicle number: G300402 German vehicle Ncsdpfxsxy Ul Se Aazjr Immediately available at our premises in Kaufungen – Kassel, Germany For more INFO, contact Luis Lucena Year of manufacture: 2012 Empty trailer weight: 6,530 kg LIEBHERR concrete mixer semi-trailer 10 m³ Errors and omissions excepted We are happy to take your used vehicle in part exchange. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMM000000L0066323, empty load weight: 2,980 kg, maximum load weight: 7,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, total length: 7,498 mm, total width: 2,550 mm, tire condition: 95 %, color: white, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Trailer in as-new condition Sale without warranty / guarantee Subject to prior sale and errors! Njdpfx Aeyt Igkjazecr The information in this advertisement is non-binding and does not constitute guaranteed characteristics. The seller accepts no liability for any typographical or data transmission errors. Listed equipment must be verified separately. All details in the advertisements are non-binding!

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Drawbar height adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus, B-dimension is approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: Nodpfxjv D Tbdo Aazocr * Mechanically adjustable 3 m warning sign packages at front and rear * Support windlass at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm fitted to both left & right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute outside width of 3,000 mm ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm – on each side, 5 x 3 t UVV lashing rings installed * At each front and rear corner, 1 x 6.3 t lashing ring (front directly behind container locks in timber floor, rear in end cross member) * Various holes in the front and end cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment recessed under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support windlass, and flange drawbar eye painted in black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring actuators * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled by reverse gear) Ncjdpfsv D Tbksx Aazer * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign panels front and rear * Landing leg at the front * Rear folding supports (external) * Plastic toolboxes approx. 750 x 350 x 300 mm each, left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing loops every 600 mm possible - 5 x 3 t UVV lashing loops fitted on each side - * In each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access storage compartment integrated under the loading area within the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg, and flange drawbar eye finished in black tone ----Information: * New vehicle with manufacturer's warranty * Subject to change and prior sale ----Delivery time: * Available from calendar week 22/2026

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without requiring truck-side installation * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizer assembly * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis * 15-pin electrical connector * LED rear lights, 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards Njdox Hm Riopfx Aazocr * Lashing hooks integrated into the central locking mounts as well as 2 on the front wall * Chassis made of high-tensile fine-grained steel * Steel pallet, 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement – without center stanchions – foldable with wall spring assist) * Bolt-on rear stanchions * Combined steel double-wing rear doors – asymmetrically split, swiveling and lockable up to 270°, not foldable – with additional swing frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate during rearward tipping with open doors * Lashing rings: 1 x 5 tons lashing point in each corner; 4 x 3 tons lashing rings recessed in the outer frame on each side * 4 mm floor plate made of high-tensile steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (capacity 10 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed below the load floor in the chassis at the rear for ramps * Drawbar, underrun guard, rear stake, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Tires: 358/55 R 19.5 * Side wall coating in RAL 9010 pure white * Side wall painting in RAL color of your choice available for a surcharge * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye * Jost mechanical support leg at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V Ncedpfx Aox Hm Rceazjr * Bolt-on rear underrun protection * Plastic quarter mudguards * Lashing hooks at the central locking mounts and two units at the front wall * Chassis made of fine-grain steel * Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist) * Rear stanchions bolted * Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door * In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage box recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and support leg painted black * Tires: 358/55 R 19.5 * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge * Subject to errors and prior sale * Available immediately from week 10/2026 * Sample images

Condition: used, first registration: 06/2011, total width: 25,500 mm,

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Flatbed | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to offer you an individual quote * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m flatbed with galvanized 400 mm front wall * Digger bucket support made of hardwood, bolted to the front wall * Platform height unladen: 930 mm / laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, telescopic down to approx. 20 mm, secured with support bars and inclined bracing * Ramp assist with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-bent with perforation for lashings, lashing capacity per point LC 2000 daN at least 480 mm apart. Installation of drop lashing rings LC 3000 daN at approx. 600 mm spacing possible) with close-spaced transverse profiling, high-profile front and rear ends, rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed in existing grid in the outer frame, additionally * Further lashing options via boreholes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Tool box in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor, chassis hot-dip galvanized * Height-adjustable landing gear at the front, foldable supports at the rear * Retrofitting of 2 container twistlocks possible * Drawbar with 40 mm draw eye (hot-dip galvanized), height adjustable, 50 mm eye available on request * 1 removable LED marker lamp at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. from 510 euros over 60 months, no down payment, no residual value * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of opening hours we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in possible Nedpoyndh Hefx Aazjcr