Used Müller-Mitteltal Ets Trailers for sale (252)

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General accessories: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted under the chassis on the right-hand side ----Lowbed platform: * Fifth wheel platform with 45° chamfered front corners and front-mounted tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with foldable lid * 400 mm high foldable and removable aluminium drop sides (RAL 9010 pure white) on the side of the fifth wheel platform * Removable rear panel, 150 mm high * Rear slope on the fifth wheel platform to the lowbed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical fold-out extensions for total width of 3 m (not on the rear slope; extension boards included with storage on the fifth wheel platform) * Mechanically adjustable warning board kits front and rear ----Load securing (Lasi package): * On the fifth wheel platform, 2 x 6.3 t lash rings each, and 3 x 5 t lashing bars on the side in the outer frame * On the side of the lowbed platform, 2 x 13.4 t lashing rings each, plus 4 x 10 t pivoting and lowerable lashing rings embedded in the outer frame * On the side, 2 x 6.4 t lashing eyes each, and 1 lashing ring at the rear in the excavator boom rest * 2 x container locks directly after the drop in the lowbed platform Iodpfjpk D I Aox Af Sjhu ----Excavator boom rest: * Continuous excavator boom rest from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm ----Loading ramps: * Mechanical one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofitting of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 to 120 l/min) ----Loading dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, loading ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures may show equipment not included with the offered vehicle ----Delivery time: * Available from week 26/2026

Condition: used, axle configuration: 2 axles, first registration: 11/2006, total length: 7,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, color: other, Year of construction: 2006, = Additional options and accessories = Engine - Number of fuel tanks: 1 Superstructure - Capacity of the superstructure: 9 m3 (The total capacity of the superstructure.) - Material: steel - Superstructure construction year: 2006 = More information = General information Colour: Purple Applicable material: Concrete Axle configuration Isdpfx Afoycfukj Sehu Tyre size: 385/65R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 10%; Tyre profile right: 20% Weights Empty weight: 7.920 kg Carrying capacity: 21.080 kg GVW: 29.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Inquiry number: 23185 Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low-bed three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload 8,750 kg. * Tyre pressure monitoring with display function via EBS signal in truck * EBS 24 Volt * Side marker lights with indicator function * LED lighting system for 12+24 Volt * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanized floor: 5m x 2.42m; 0.5m high laser-welded drop sides, swinging, folding, and removable * Prepared for possible later fitting of side wall extensions * Support cables for rear wall * Lockable compartment under tipping platform for loading ramp * Incl. aluminium ramps, 8t capacity, 3.57m long, stored in ramp compartment under the tipping body * Front wall hot-dip galvanized * 4 UVV lashing rings (LC 5000daN) at front and rear + 8 recessed and folding lashing rings (LC 3000daN) in the tipper floor (centered) * Continuously height-adjustable, hot-dip galvanized drawbar with 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * One plastic toolbox on the right side of the chassis frame * Access step in front of the front wall ---- We are Müller-Mitteltal trading partner ---- Ihjdpjyh Sr Defx Af Ssu E.g., €520 net per month for 60 months, no down payment, no residual value. Offer from our financing partner FM LeasingPartner We will be happy to send you a non-binding quote. ----Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours by appointment. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Reference number for inquiries: 11599 * BRAND NEW VEHICLE now in stock and available immediately in Alsdorf * Versatile use: construction, landscaping, agriculture, and forestry – can be used as a tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Ramps Ihodpfx Afjyhtwwo Sou * Tyres: 385/55 R19.5 (4x), BPW Axles, Parabolic springs, Drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload: 8,750 kg * EBS Multi-voltage system for towing vehicles with 12 and 24 Volt electrics (e.g., agricultural and forestry vehicles) * Side marker lights with indicator actuation * LED lighting system for 12+24 Volt with 1x 15-pin connection cable and 1 additional connection cable as standard, 12 Volt 13-pin version with blank sockets for both electric plugs * Galvanized floor, 5m x 2.42m x 0.5m; side panels laser-welded, swinging, folding and removable, pre-configured for later retrofitting of side panel extensions * Lockable compartment under the tipping bridge for loading ramps * incl. aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * * We are an official Müller-Mitteltal dealer! Contact us for an offer! * e.g., €519 net per month for 60 months without down payment, zero final installment. Financing offered by our partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged by request. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights Ihjdotplv Topfx Af Sou * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: Ihsdpfspk D Iijx Af Seu * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear Ihedpopk D Awjfx Af Sju ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Inquiry number: 23185 Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low-bed three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload 8,750 kg. * Tyre pressure monitoring with display function via EBS signal in truck * EBS 24 Volt * Side marker lights with indicator function * LED lighting system for 12+24 Volt * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanized floor: 5m x 2.42m; 0.5m high laser-welded drop sides, swinging, folding, and removable * Prepared for possible later fitting of side wall extensions * Support cables for rear wall * Lockable compartment under tipping platform for loading ramp * Incl. aluminium ramps, 8t capacity, 3.57m long, stored in ramp compartment under the tipping body * Front wall hot-dip galvanized * 4 UVV lashing rings (LC 5000daN) at front and rear + 8 recessed and folding lashing rings (LC 3000daN) in the tipper floor (centered) * Continuously height-adjustable, hot-dip galvanized drawbar with 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * One plastic toolbox on the right side of the chassis frame Iedpfx Asyg Tl Ejf Sshu * Access step in front of the front wall ---- We are Müller-Mitteltal trading partner ---- E.g., €520 net per month for 60 months, no down payment, no residual value. Offer from our financing partner FM LeasingPartner We will be happy to send you a non-binding quote. ----Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours by appointment. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side Ihjdpfx Afexb Ig Ss Seu ? rear view camera ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling Ihsdoxb Iglopfx Af Seu ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized, folding rear supports * Plastic toolbox mounted on the front right exterior of the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Pre-installed fittings for later mounting of 20" container locks front and rear * Bolted smooth sheet steel front wall * Trapezoidal profile steel sheet side walls, foldable with drop side spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front wall and rear wall * Complete vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to alteration and prior sale ----Delivery Time: * Available immediately ex Egestorf Iedpfxendpn Ss Af Sshu

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm Ihodpfopk D Dqsx Af Sju * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Side Extension Boards + Aluminium Ramps * Inquiry number 11532—immediately available from stock in Alsdorf * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m + 0.5m steel extensions, 3 sides swinging, foldable, and removable, painted with spring assist and central locking (locking mechanism galvanized) * Tipper floor galvanized * Two-step access in front of the front wall (galvanized) * Lockable compartment under tipping platform for loading ramps * Aluminium loading ramps, 8t per pair, 3.57m in length * 2 LED reversing lights at the rear * Chassis hot-dip galvanized * 4 UVV-rated lashing rings LC 5000 daN at front and rear + 8 foldable and recessed lashing eyes LC 3000 daN in the tipper floor (centered) * Side marker lights with indicator control Ihjdpfx Aswnvt Aof Ssu * Continuously height-adjustable towing bar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), BPW axles, parabolic leaf springs * LED light system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring * We are an official Müller-Mitteltal dealer ---- * Hire-purchase example from our cooperation partner MMV Leasing: EUR 554 per month net for 60 months, with zero down payment and zero remaining value * Other terms with or without down payment / residual value possible ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, we are available by appointment. We speak German, English, Polish, and French. * WhatsApp Leasing, financing, and trade-in available ----

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-bracing units Ihodpfxol Tn U Rs Af Seu * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, 1st axle liftable, ABS (anti-lock braking system), U-protection, supports Body: Liebherr concrete mixer type HTM 1004 approx. 10m³ 2x 10t BPW axles! Suitable hydraulics for engine power take-off on towing vehicle available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ihedpfx Afoi Rk Axo Ssu - .

Condition: used, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! Iodpfxov R Hmae Af Sohu - .

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Ihjdpfx Afjv S H Sfe Seu Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, next inspection (TÜV): 02/2025, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel construction, 2 axles, turntable, leaf springs, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps Iedpfxewth Iie Af Sjhu Construction: 2-axle 3-way tipping trailer Gigant axles, drum brakes, frame hot-dip galvanized! Loading height approx. 1290mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 2,230 kg, maximum load weight: 3,770 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 02/1984, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 500 mm, suspension: steel, tire size: 10.5-20, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Ijdpeuxd Rpsfx Af Sjhu Body: 3-sided tipper trailer with towing jaw and brake connections (red, yellow) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, next inspection (TÜV): 08/2024, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Ihsdpfx Afsth Uavj Sju Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, next inspection (TÜV): 03/2024, loading space length: 8,000 mm, loading space width: 2,520 mm, loading space height: 910 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, leaf suspension, 3-axle, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydr. ramps, rear support, aluminum side bumpers, twin tyres, storage box Superstructure: Hydr. ramps, can be widened to 3m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdpfxsqpgtmj Af Sehu - .

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 02/2007, loading space length: 5,020 mm, loading space width: 2,460 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechan. Ramps, front support, storage box, height-adjustable drawbar Body: Tandem low loader trailer with mechanical ramps 2x BPW axles, drum brakes! Loading height approx. 930mm! Ramp length approx. 2600mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ihjdpfowvikqjx Af Sju - .

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 02/2028, Year of construction: 2012, Internal vehicle number: G300402 German vehicle Immediately available at our premises in Kaufungen – Kassel, Germany Iedexy Ul Sjpfx Af Sshu For more INFO, contact Luis Lucena Year of manufacture: 2012 Empty trailer weight: 6,530 kg LIEBHERR concrete mixer semi-trailer 10 m³ Errors and omissions excepted We are happy to take your used vehicle in part exchange. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ---- Brakes: * Wabco EBS-E braking system Ihodpfsyfy Rrox Af Sou * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ---- Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via control cylinder * Start-up assist function for maneuvering and forced lowering onto the first axle—controlled via speed-dependent EBS electronics—(no truck-side installation necessary, includes cable for operation from the tractor) ---- Air Suspension: * Air suspension with lowering function via remote control ---- Drawbar / Flange Eye: * 50 mm flange-mounted drawbar eye — height adjustable by +77 mm and -33 mm — for 2 tons vertical load ---- Electrical / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light ---- General Accessories: * BPW landing gear at front * Mechanically extendable underrun protection for containers over 6,000 mm in length * Speedline diamond aluminum rims * Detachable towing pin coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes, matt finish, approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection usable as advertising surface ---- Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right side at the front wall) operated via remote control ---- Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pull force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with fast function for lowering, not for lifting * Emergency stop buttons, left and right sides * Container bearing with 4 lateral supports each side and 1 roller at the rear * Hydraulic internal locking mechanism at the rear * 2 additional hydraulic cylinders to assist lifting the main arm * 2 mechanical drop-down supports at the rear * Approved for 20 tons gross weight (2 x 9 tons axles) and 2 tons vertical load * Note: If the remote control is outside the charging cradle, the service brake must be engaged to activate the remote control. Brake connections must remain connected to open hydraulic/pneumatic valves * Monitoring system for underrun protection to ensure it is retracted during tipping ---- Loading Height: * Unladen, approx. 1,300 mm with lowered lift axle ---- Paintwork: * Chassis, drawbar, access steps, underrun protection, and support legs are hot-dip galvanized * Axles, air tanks, and front landing gear are painted in black * Palfinger hooklift painted black/yellow ---- Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ---- Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Info: * Mounting lugs for hooklift systems present

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS * RDÜ Tire Pressure Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit Iodol Th A Eepfx Af Sehu * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fender * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack * Tailgate foldable and swinging via manual Central locking system * Hot-dip galvanized bolted rear stanchions * 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Net hooks, rear mounting rail for the landing ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as a climbing aid * 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tanks, and landing gear painted in a black tone * Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized * New vehicle without first registration and with manufacturer's warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 pure white * Paint finish Side panels available in a RAL color for an additional charge * Errors and prior sale subject to change * Available for immediate delivery from Egestorf