Used Müller-Mitteltal Silo Semitrailers for sale (261)

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalisation at rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at front & rear * VA closed plastic fenders at front and straight galvanized sheet steel skirts at rear, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted on the side under the chassis * 15-pin power socket * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included) with simultaneous lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant lashing rings, pivoting and retractable * Loadable in all directions and recessed in the outer frame corners with 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out supports for 3 m total width (not on the rear slope) * Extension boards for widening stored in a compartment beneath the loading area * Excavator arm rest above rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on sides of excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load holding valves, hydraulically adjustable ramp offset * Hydraulic flow divider in the trailer (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min), twin-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm leveling unit * Chassis, turntable, fold-out supports, rear drop supports and drive-up ramps hot-dip galvanized Cpjdpfxjtplwfo Aa Rot * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 03/2026

Condition: used, empty load weight: 6,250 kg, maximum load weight: 23,750 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2008, loading space length: 8,300 mm, loading space width: 2,510 mm, loading space height: 930 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, turntable, leaf suspension, ABS (anti-lock braking system), can be widened to 3m, lashing eyes, mechanical ramps, rear support, side aluminum underrun protection, twin tires, storage box Body: 3-axle low-loader trailer with mechanical drive-on ramps 3x 10t Gigant axles, drum brakes, Can be widened to 3m! Ramp length approx. 2900mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and mistakes excepted! Cedpoxvzq Hefx Aa Rjpt - .

Condition: used, empty load weight: 7,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2006, next inspection (TÜV): 05/2026, loading space length: 9,100 mm, loading space width: 2,750 mm, suspension: air, tire size: 235/75 R17,5, color: grey, Equipment: ABS, Drum brake Payload 22,200 kg Rubber floor Hydraulic double ramps and hydraulic lateral shift Gigant axles Cpjdpfxswh Rwvo Aa Rst Subject to errors and omissions.

Condition: used, axle configuration: 1 axle, first registration: 08/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS = More information = Cpedpfxjxt Sl No Aa Rjt Empty weight: 3.700 kg Carrying capacity: 9.300 kg GVW: 13.000 kg

Condition: used, maximum load weight: 8,100 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 2,900 kg Payload: 8,100 kg Overall length: 8,100 mm Loading length: 6,000 mm Width: total width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Side wall height: 400 mm Cpjdpfxextfkfs Aa Ret - Wooden floor - Spring ramps L: 2,700 mm W: 600 mm - Height-adjustable drawbar - Tyres 235/75 R17.5

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera Cpedpfoxb Ig Sox Aa Rot ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS brake system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign holders front & rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Folding (hot-dip galvanized) toolbox lid in the turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm - powder-coated black - fitted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four stake pockets on each side (no stakes present) with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant swing-out and retractable lashing rings Cpodpfx Aaoq Dyv Is Rst * Loadable in all directions and integrated into the outer frame at the corners (13.4 t), elsewhere 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in a compartment under the loading surface * Excavator arm support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically folding ramp tips and load holding valves, hydraulically lateral ramp displacement * Hydraulic flow divider in the trailer (for truck hydraulic pump output over 40 l/min up to max. 140 l/min), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded platform height approx. 860 mm +/- 30 mm (compensation unit) * Chassis, turntable, folding outriggers, rear drop supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 03/2026

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Cpedpev S H Sfsfx Aa Rst Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, axle configuration: 2 axles, first registration: 08/1996, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = Cpedpfjxt Sd Eox Aa Rot - EBS = More information = Empty weight: 2.360 kg Carrying capacity: 10.640 kg GVW: 13.000 kg

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal—no truck-side installation required * Landing gear (manual crank jack) at the front * External folding supports at the rear * 15-pin electrical connector * LED lighting system, 12/24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems * Plastic toolbox, approx. 858 x 500 x 500 mm, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter fenders * 50 mm softwood flooring * Bracket in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Rear stanchions bolted * Side panels with spring-assisted lifting mechanism * Perforated external frame, approx. 45 degrees bent, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; one 6.3 t lashing ring in each front and rear corner; front and rear cross members with various holes for 1.2 t lashing options * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (retractable to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Side panels painted in RAL 2011 deep orange * Custom RAL color painting of the side panels available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf Cpodpfx Aaexvgrpj Ret

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2012, loading space length: 6,770 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, container lock, twin tires, storage box Body: 2-axle turntable flatbed trailer with stanchions and TwistLock locks, TwistLock can be extended to 3m. 20t, drum brake, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Access ramp for 1.000,- EUR extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cpedpfx Aaot Uq D Te Rjt - .

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal - no truck-side installation required * Front landing gear Cjdpfx Aaoxvgrij Rspt * Rear external foldable supports * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Pre-installed facility in front of the bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of flat steel sheet * Bolted rear stanchions * Drop sides with spring assist * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t recessed lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 t lashing options * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm) * Hydraulic flow divider in the trailer (for truck hydraulic pump output above 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and towing eye flange painted in black * Side walls painted in RAL 2011 deep orange * Painting of the side panels in any RAL shade available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: used, empty load weight: 2,380 kg, maximum load weight: 8,320 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 04/2016, next inspection (TÜV): 06/2026, loading space length: 5,030 mm, loading space width: 2,010 mm, loading space height: 325 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminium underrun protection, tool box, height-adjustable drawbar. Body: tandem low-bed trailer with mechanical loading ramps, galvanized access ramps, 2x BPW axle, drum brakes! Loading height approx. 700 mm! Cedpfsxqhltsx Aa Rept Ramp length approx. 2200 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: like new (used), maximum load weight: 14,400 kg, overall weight: 12,080 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, suspension: parabolic leaf (spring), tire size: 285/70R19.5, wheelbase: 1,140 mm, trailer brake: trailer braked, Year of construction: 2022, - ETM-TA 14.4: - Wabco ABS brake system Csdpfoxvbcpjx Aa Ropt - Emergency release device for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem equalizing module - Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted towing eye - Jost landing gear at the front, side underrun protection - Foldable A-board at the rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel rear wall - Floor made of 50 mm softwood - 1 sliding steel plate (750 x 1,000 mm) in the front area incl. 2 container stops at the front, each insertable in 2 positions - 4 relocatable container stops, insertable in 2 positions for lateral centering of containers - Each side with 1 x (13.5 t) UVV lashing point for attaching securing elements - 2 ratchet tensioners (spindle-adjustable) with compensating chain and quick shortener (tension force 6,300 kg) - Rear crossbeam for positioning aluminum loading ramps incl. 2 additional drop supports at the rear - Loading height (unladen) approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized - Axles, springs, landing gear, air tanks painted in black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Loading edge (unladen): approx. 710 mm - Finish: hot-dip galvanized - Vehicle has a day registration in 06/2024, has not been used or loaded due to lack of tire pressure monitoring system - New vehicle with manufacturer's warranty - Subject to prior sale and errors - Immediately available from Egestorf on the A7

Condition: new, functionality: fully functional, empty load weight: 2,140 kg, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, tire size: 285/ 70 R 19,5, wheelbase: 1,140 mm, Year of construction: 2026, - TM-TA 14.4: - Wabco EBS (Electronic Braking System) - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with balancing unit - Jost landing gear at the front, 2 external drop-down supports at the rear - Height-adjustable, +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis, 15-pin power connector Cpsdpfjxu Hplsx Aa Ret - LED tail lights - Closed individual plastic mudguards - Foldable A-panel at the rear - Plastic underrun protection buffer on the underrun guard - Hot-dip galvanized collision guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right - 2 repositionable skip stops for lateral centering of containers - Front skip stops can be locked in 4 positions with a swinging stop - 2 x 5.3 t UVV lashing rings on each side for attaching tensioning devices - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Condition: new, functionality: fully functional, empty load weight: 2,140 kg, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, suspension: steel, tire size: 285/ 70 R 19,5, wheelbase: 1,140 mm, trailer brake: trailer braked, Year of construction: 2026, - TM-TA 14.4: - Includes 2 ratchet tensioners permanently mounted on the outer frame with chain box, both sides with eye and quick-shortener, in Y-special version, 6.3 t - Tension force with load securing certificate - Wabco EBS (Electronic Braking System) Cpedpfxexuhy Es Aa Rjt - RDÜ Tire Pressure Monitoring System - Emergency release device for spring-loaded cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost support winch at the front - 2 x external drop-down rear supports - Height-adjustable galvanized tow bar, +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights - Closed individual plastic mudguards - Folding A-shield at the rear - Plastic collision protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right - 2 removable trough stops for lateral trough centering - Front trough stops with 4-position adjustable pendulum mount - Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements - Axles, springs, air reservoirs, and support winch painted in black - Subject to errors and prior sale - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2025, * ETS-TA-B 11.9: Cjdpfxowyhzve Aa Rjpt * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with balancing unit * Drawbar adjustable in height by approx. 300 mm * BPW support winch * Mechanical drop-down supports at the rear * Plastic toolbox on the front right of the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * In the corners in front of the bulkhead and the rear cross member, 1 x 6.3 t lashing point each; laterally, 2 x 6.3 t UVV-compliant lashing rings each set into the outer frame * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,350 x 870 mm (20 mm spacing between, ramps non-slidable) * Front wall, side walls, mudguards and drawbar hot-dip galvanized * Axles, springs, air tank, and front support winch painted black * New vehicle with full manufacturer's warranty * Errors and interim sale reserved * Immediately available from Egestorf

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2024, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead Cpjdpfx Aswyhzpea Rjt * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with equalizer unit * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Support winch at the front * External folding support legs at the rear * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems Csdpfjrwc R Ajx Aa Ropt * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Fixture in front of the bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of flat sheet metal * Bolted rear stanchions * Sideboards with spring-assist * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; 1 x 6.3 t lashing ring in each front and rear corner; various drillings in front and rear cross-members for 1.2 t lashing points * Single-piece hydraulic grid ramp approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump capacity in the truck over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tank, front support winch, and flange-type towing eye painted in black * Sideboards painted in RAL 9010 pure white * Side wall painting in an RAL color tone available at extra cost * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm Cedpfxorwc R Ro Aa Ropt * Tire pressure monitoring with indication (display) in the truck via EBS signal—without any truck-side installation required * Support winch at front * Exterior foldable support struts at rear * 15-pin electrical plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Preparation at the front bulkhead for retrofitting container locks * Bolted 400 mm smooth sheet metal bulkhead * Bolted rear stanchions * Side walls with spring assist * Perforated outer frame, bent approx. 45° with 2 t lashing capacity every 480 mm, possible installation of 3 t drop lashing rings every 600 mm, in each front and rear corner 1 x 6.3 t lashing ring, various mounting holes in the front and rear crossmembers for 1.2 t lashing options * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange draw eye painted in black * Side wall painting in RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at an extra charge * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS (Electronic Braking System) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Adjustable drawbar, galvanized, with 300 mm height adjustment and 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical galvanized folding rear supports * 15-pin electrical connector * LED tail lights * Galvanized, bolted underrun protection * Galvanized steel toolbox, mounted on the right side * Plastic quarter mudguards * Galvanized chassis * Steel platform body - 3-way tipper * Continuous drop sides with upper internal tubular reinforcement, no center posts, foldable with side wall spring lifter * Rear flap foldable and swinging, with manual central locking * Galvanized, bolted rear stanchions * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing rings each side, integrated into the outer frame * 4 mm fine-grained steel floor plate * Net hooks and rear ramp mounting rail Cjdpfxel Th A Eo Aa Ropt * Prepared for later installation of side wall extensions * Body reinforced and certified for cargo securing according to EN 12642 XL * Two-step access on the left side * 1 pair of aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed under the loading area in the chassis * Axles, springs, air tank, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle, unregistered, with manufacturer's warranty * Tire size: 385/55 R 22.5 * Side wall paintwork in RAL 9010 pure white * Optional side panel paintwork available in any RAL color for a surcharge * Errors and prior sale excepted * Available from calendar week ...

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer assembly * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Side-mounted toolbox made of galvanized steel sheet, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls at the top with internal tube reinforcement, without central posts, foldable with drop-side spring assist * Rear gate foldable as well as swinging, with manual central locking * Hot-dip galvanized, bolted rear stakes * Each corner with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed in the outer frame on each side * 4 mm sheet floor made of fine-grained steel * Net hooks, rear ramp mounting rail * Prepared for optional retrofit of side wall extensions * Body reinforced with load securing certificate according to EN 12642 XL * 2-step access on the left side as climbing aid * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading area in the chassis * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without prior registration, covered by manufacturer’s warranty Cjdpfxjv Dz N Ne Aa Rept * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 pure white * Other side wall colors in RAL available at extra cost * Subject to errors and prior sale * Available from KW (calendar week)

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS (Electronic Braking System) * RDÜ Tire Pressure Monitoring System * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7-ton Gigant Axles * Parabolic Springs with Tandem Equalizer Unit * Approx. 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted on the right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous sidewalls with top internal tube reinforcement—without center stanchions—foldable with drop-side spring assist * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized, bolted tailgate stanchions * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings recessed in the outer frame on each side * 4 mm sheet steel floor made of fine-grain steel * Net hooks, mounting rail at the rear for loading ramps * Preparation for subsequent installation of side board extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as climbing aid * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber and tracked vehicles * Lockable storage compartment integrated below the loading area at the rear of the chassis * Axles, springs, air tanks and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without prior registration with manufacturer’s warranty * Tires: 385/55 R 22.5 * Sideboard paint finish in RAL 9010 pure white * Sidewall paint finish available in any RAL color at extra cost * Subject to errors and prior sale * Available from calendar week… Cpjdpfev El Tujx Aa Rot

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Cpodpfxjxptn Ro Aa Ret * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform Codpjxptn Dsfx Aa Rjpt * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026