Low loader

Müller-Mitteltal T 3 Profi 30

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic fenders, and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour striping on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via coil spring & tension lock * 15-pole electrical connector * 4 lashing pockets on each side (however, no lashing bars are included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform, 5 pairs of pivoting and lowering UVV lashing rings, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons. * 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope) * Extension boards placed in the center of the loading area * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator arm rest) * Hydraulically operated, single-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting Kdsdpfxel Thxds Abnop * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. are painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Available from approximately week 44/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic fenders, and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour striping on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via coil spring & tension lock * 15-pole electrical connector * 4 lashing pockets on each side (however, no lashing bars are included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform, 5 pairs of pivoting and lowering UVV lashing rings, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons. * 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope) Kdedpfx Asl Th Adebnjp * Extension boards placed in the center of the loading area * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator arm rest) * Hydraulically operated, single-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. are painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Available from approximately week 44/2026

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring accumulators * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Air suspension with lift and lower function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking clamp ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pole power connector ----General Components: * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side with simultaneous 2-ton lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards placed in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the side ----Load Securing (Load Securing Package): * 2 lashing points (6.4 tons) on the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – 13.4 tons in the corners, otherwise 10 tons. ----Excavator Arm Rest: * Approximately 2,100 mm long from the rear axle to the end crossmember (2 pairs of 6.4-ton lashing points on the side in the excavator arm rest) ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) ----Loading Height: * Unloaded: approx. 1,070 mm * Loaded: approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint Finish: Kdsdpfol Tpwyex Abnep * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Sample images ----Delivery Time: * Available from approximately week 32/2026

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco axles ----Suspension: * Air suspension with raising and lowering function using an RtR valve ----Drawbar: * Drawbar with 40 mm towing eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS (tire pressure monitoring system) * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel mud flaps, each with splash guard * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the tool compartment in the turntable platform ----Low-bed platform: * 4 pocket slots on each side with simultaneous 2-ton lashing capability * 6 pairs of mechanically folding outriggers for a total width of 3 meters (however, not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the side ----Load securing (Load Securing Package): * 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame - in the corners 13.4 tons, otherwise 10 tons. ----Excavator arm rest: * Approximately 2,100 mm long from the rear axle to the end crossmember (2 pairs of 6.4-ton lashing rings on the side in the excavator arm rest) Kedpfx Aol Tq Eujbnjdp ----Loading area: * above the turntable: approx. 1,960 x 2,520 mm * rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) ----Loading height: * unladen approx. 1,070 mm * laden approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Sample images ----Delivery time: * available from approximately week 32/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco axles ----Suspension: * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking pin ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle covered in plastic mudguards, rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and at the rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards stored in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4-ton lashing points on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing points, swiveling and lowering, loadable in all directions and recessed into the outer frame in the corners, 13.4 tons, otherwise 10 tons ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) Kedpox Ipa Nofx Abnedp ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: * --Technically, a permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles Kjdex Ipavepfx Abnedp ----Suspension: * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low Loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards placed in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and embedded in the outer frame in the corners at 13.4 tons, otherwise 10 tons. ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: * --Technically possible gross vehicle weight of 30,000 kg-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: used, maximum load weight: 18,150 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 10/2026, loading space length: 8,300 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS * 5-chamber rear lights * Duomatik air connection Kdodpfx Abozaln Senjp * Gigant axles * Rear supports ----Body: Low-loader trailer (1800+6500mm) / loading height approx. 920mm, sloping towards the rear / access height approx. 770mm, steel/wood floor, hydraulic ramps (galvanized), load-bearing capacity 15,000 kg/ramp, lashing points + lashing eyes For sale to commercial customers only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: Kedpfxjx Ipbgs Abnedp * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at rear * Side underrun protection * Swing supports at rear on chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel fender skirts, both with splash guards * Reflective contour marking tape on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets each side (no stakes present), with simultaneous lashing capability * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform; 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outrigger extensions for 3-meter overall width (not at rear slope) * Extension planks stored in the middle of the loading platform * Excavator boom trough above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of the trough) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Deck over turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear deck: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm ramp slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. calendar week 36/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at rear * Side underrun protection * Swing supports at rear on chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel fender skirts, both with splash guards * Reflective contour marking tape on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets each side (no stakes present), with simultaneous lashing capability * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform; 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outrigger extensions for 3-meter overall width (not at rear slope) Kjdpsx Ipb Hsfx Abnedp * Extension planks stored in the middle of the loading platform * Excavator boom trough above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of the trough) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Deck over turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear deck: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm ramp slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. calendar week 36/2026

Condition: used, empty load weight: 6,400 kg, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 7,800 mm, loading space width: 2,510 mm, loading space height: 920 mm, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, 2-part loading ramps, hydraulic ramps, rear supports, lateral aluminum fender guards, dual tires, storage box. Superstructure: 3-axle low-bed trailer with hydraulic 2-part loading ramps (hydraulically foldable and laterally adjustable), galvanized loading ramps, 3 x 10-ton SAF axles, drum brakes, excavator arm recess, 50 mm drawbar eye! Platform at the top approx. 1500 mm, platform at the bottom approx. 6300 mm! Ramp length approx. 4200 mm! Ksdpfey R Ekiex Abnjdp A matching 40 mm drawbar can also be supplied for an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!