Used Müller-Mitteltal Flatbed & Tarpaulin Trailers for sale (249)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes provided), each also suitable as lashing points * Load securing package including: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame—13.4 t in corners, otherwise 10 t * 6 pairs of mechanical swing-out extensions for 3 m overall width (excluding the rear slope) * Widening boards stored in the center of the loading area * Excavator arm rest above rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized Itedpfx Agox Ipb Hsxef * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2028, Year of construction: 2012, Internal vehicle number: G300402 German vehicle Itodpfxsxy Ul Ss Agxsf Immediately available at our premises in Kaufungen – Kassel, Germany For more INFO, contact Luis Lucena Year of manufacture: 2012 Empty trailer weight: 6,530 kg LIEBHERR concrete mixer semi-trailer 10 m³ Errors and omissions excepted We are happy to take your used vehicle in part exchange. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMM000000L0066323, empty load weight: 2,980 kg, maximum load weight: 7,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, total length: 7,498 mm, total width: 2,550 mm, tire condition: 95 %, color: white, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Trailer in as-new condition Sale without warranty / guarantee Subject to prior sale and errors! Isdpfx Asyt Igkogxstf The information in this advertisement is non-binding and does not constitute guaranteed characteristics. The seller accepts no liability for any typographical or data transmission errors. Listed equipment must be verified separately. All details in the advertisements are non-binding!

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: Iedpfxov D Tbdo Agxstf * Drawbar height adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus, B-dimension is approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at front and rear * Support windlass at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm fitted to both left & right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute outside width of 3,000 mm ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm – on each side, 5 x 3 t UVV lashing rings installed * At each front and rear corner, 1 x 6.3 t lashing ring (front directly behind container locks in timber floor, rear in end cross member) * Various holes in the front and end cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment recessed under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support windlass, and flange drawbar eye painted in black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring actuators * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled by reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign panels front and rear * Landing leg at the front * Rear folding supports (external) * Plastic toolboxes approx. 750 x 350 x 300 mm each, left and right side Iedpfx Aev D Tbksgxetf * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing loops every 600 mm possible - 5 x 3 t UVV lashing loops fitted on each side - * In each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access storage compartment integrated under the loading area within the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg, and flange drawbar eye finished in black tone ----Information: * New vehicle with manufacturer's warranty * Subject to change and prior sale ----Delivery time: * Available from calendar week 22/2026

Condition: new, maximum load weight: 6,110 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ Tire Pressure Monitoring System Isdpfxju I Iqro Agxetf * EBS braking system * Drum brake * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Draw tube with 40 mm screw-on towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross beams * Enclosed steel mudguards with splash protection * Enclosed side underride guard usable as advertising space * Plastic toolbox with floor insert (horizontal mounting), approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms: 1,700 mm, with tension lock for drum securing at the carrier ends and a central claw lock for securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated driving rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic pump unit with petrol engine including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 6,110 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ Tire pressure monitoring system * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front landing gear * Rear square tube supports with spring assistance, base plate, and safety locking pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Enclosed steel fenders with splash guards * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, light width between drum arms 1,700 mm, with tension lock for securing the drum at the bearing arm ends and a central claw locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends Itsdpfx Aeu I Iqfegxof * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic pump unit with petrol engine including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: Itodpfx Agex Hm Rioxjf * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without requiring truck-side installation * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizer assembly * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis * 15-pin electrical connector * LED rear lights, 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks integrated into the central locking mounts as well as 2 on the front wall * Chassis made of high-tensile fine-grained steel * Steel pallet, 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement – without center stanchions – foldable with wall spring assist) * Bolt-on rear stanchions * Combined steel double-wing rear doors – asymmetrically split, swiveling and lockable up to 270°, not foldable – with additional swing frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate during rearward tipping with open doors * Lashing rings: 1 x 5 tons lashing point in each corner; 4 x 3 tons lashing rings recessed in the outer frame on each side * 4 mm floor plate made of high-tensile steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (capacity 10 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed below the load floor in the chassis at the rear for ramps * Drawbar, underrun guard, rear stake, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Tires: 358/55 R 19.5 * Side wall coating in RAL 9010 pure white * Side wall painting in RAL color of your choice available for a surcharge * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye * Jost mechanical support leg at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on rear underrun protection * Plastic quarter mudguards * Lashing hooks at the central locking mounts and two units at the front wall * Chassis made of fine-grain steel * Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist) * Rear stanchions bolted * Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door * In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage box recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and support leg painted black * Tires: 358/55 R 19.5 * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge * Subject to errors and prior sale Iedpsx Hm Rcefx Agxstf * Available immediately from week 10/2026 * Sample images

Condition: used, first registration: 06/2011, total width: 25,500 mm,

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Flatbed | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to offer you an individual quote * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m flatbed with galvanized 400 mm front wall * Digger bucket support made of hardwood, bolted to the front wall * Platform height unladen: 930 mm / laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, telescopic down to approx. 20 mm, secured with support bars and inclined bracing * Ramp assist with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-bent with perforation for lashings, lashing capacity per point LC 2000 daN at least 480 mm apart. Installation of drop lashing rings LC 3000 daN at approx. 600 mm spacing possible) with close-spaced transverse profiling, high-profile front and rear ends, rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed in existing grid in the outer frame, additionally * Further lashing options via boreholes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Tool box in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor, chassis hot-dip galvanized * Height-adjustable landing gear at the front, foldable supports at the rear * Retrofitting of 2 container twistlocks possible * Drawbar with 40 mm draw eye (hot-dip galvanized), height adjustable, 50 mm eye available on request * 1 removable LED marker lamp at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. from 510 euros over 60 months, no down payment, no residual value * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 Itjdpfxsyndh Ho Agxjf * Friday: 08:00 - 15:00 Outside of opening hours we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in possible

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 flatbed: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system, with RTR function * 1st axle liftable * Rear axle with trailing steering function and electro-pneumatic steering lock via PIN reverse gear (trailing axle lock, operable from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at front, mechanical swing-down supports at rear of the chassis * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm, mounted on right side * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the beavertail Itedpfjr Dpz Asx Agxef * Folding rear stanchions * Steel rear wall slid in front of the rear stanchions * 15-pin electrical socket * LED tail lights * Removable LED beacon incl. bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45 degrees angled, with mounts for 3 t folding lashing brackets * Each corner fitted with 1 x 10 t lashing ring; additionally 2 x 10 t and 3 x 6.3 t lashing rings per side * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable laterally * 4-section hydraulic valve block for potential retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and mechanical landing gear at front painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 13/2026 * Sample images (pictures of the vehicle may differ due to special equipment)

Condition: new, maximum load weight: 13,410 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – without installation on the truck side * 2 x 9 t Gigant axles Ijdpsxl Nkgofx Agxotf * Air suspension with level control during tipping operations * Drawbar with 50 mm flanged towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gear at the front * Foldable, galvanized steel underrun protection for paver feeding * Enclosed plastic single mudguards * Standing platform at the front wall * Manual rolling tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * Chassis made from fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without central stanchion – pivoting via manual central locking; left side foldable with tailgate spring assist) * Rolling tarpaulin similar to RAL 7038 agate grey, with tensioning by side ratchets and tensioning rubbers at front and rear * Front wall platform made of grating with climbing step at the drawbar and a hand grip on the front wall * Rear wall – made from HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 recessed and foldable 3 t lashing rings per side, integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Tipping platform and side walls painted in RAL 9010 pure white * Tailboard painted in RAL 9010 pure white * Sidewalls painting in any RAL color available at extra charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * First axle liftable * Last axle as trailing steering axle with electro-pneumatic locking via reverse gear PIN (locking of the trailing axle from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Fixed central drawbar with 50 mm flange eye (loaded 900 mm, vertical adjustment at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, right side * 15-pin electric connector * LED tail lights * Removable LED beacon, incl. bracket and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch / Douglas fir wooden floor * 400 mm slotted steel front wall * Perforated outer frame approx. 45° angled with devices to mount 3 t folding lashing rings * In each corner 1 x 10 t lashing ring, plus on each side 2 x 10 t and 3 x 6.3 t lashing rings * Various holes in the front and rear cross members for 1.2 t lashing options Ioder Dpzxjpfx Agxetf * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Errors and prior sale reserved * Available from CW 13/2026 * Sample images (Pictures may differ from the actual vehicle due to special equipment)

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Iodpeyncyhofx Agxotf Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low-loader | Flatbed | Trailer Available now. Reference number for inquiries: 27678. Delivery to your address possible free of charge. * We are happy to provide you with an individual quote * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high * Excavator bucket rest made of hardwood, bolted to front wall * Floor height unloaded 930 mm / loaded 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, adjustable down to approximately 20 mm, secured with support rods and angle bracing Isdpfx Aoyadz Rsgxjtf * Ramp assist with vertical, adjustable springs for easy one-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN at a minimum distance of 480 mm; option to fit drop lashing rings LC 3000 daN at approximately 600 mm spacing) with closely spaced cross members, high-profile front and rear end sections, rear drive-on ramp, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in existing outer frame grid, additionally * Further lashing options via bores (Ø 50 mm, LC 1200 daN) in front and end cross members * Toolbox in front of front wall * Side marker lights with indicator control * Softwood flooring, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in front cross member * Height-adjustable landing gear at the front, folding supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm towing eye available upon request * 1 removable LED marker light at the rear---- * Leasing, hire purchase, financing, trade-in possible * For example: €515 over 60 months with no down payment, no residual value * ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside business hours, appointments are available by arrangement We speak German, English, Polish, and French Leasing, financing, trade-in possible

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no in-truck installation required) * 15-pin power connector * LED rear lights 12/24 V * Removable LED beacon at the rear ----General Accessories: * Support winch at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Area: * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of profiled steel sheet, foldable with side wall spring lifters * Steel rear wall insertable between the ramps – storage bracket inside at the front wall when not in use * Removable bolted rear stanchions * Inclined access ramp at rear, approx. 860 mm ----Floor Covering: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the access slope and externally on the lowbed platform (from front to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation option for 3 t folding lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Multiple holes in front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 870 mm (retractable to 20 mm) ----Paintwork: Itjdox Ipapjpfx Agxjf * Chassis, drawbar, front wall, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Vehicle is immediately available

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display option via EBS signal (no installation on truck required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Rear LED beacon (removable) ----General Attachments: * Support crank at the front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Bed Deck: * Fixture in front of bulkhead for retrofitting container locks * Bolted smooth-sheet bulkhead * Drop sides made of steel sheet, trapezoidal profile, foldable with drop side spring lifter * Steel tailgate, stowable between ramps - bracket for non-use inside, in front of bulkhead * Bolted rear stanchions * Rear incline approx. 860 mm ----Floor Covering: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strip on inner side of loading ramps * 12 mm thick, 210 mm wide rubber strips in the rear incline and outer area of low bed platform (from bulkhead to rear cross member) ----Load Securing: * Slotted external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In the front and rear corners, 1 x 6.3 t lashing ring each * Various holes in the bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (adjustable down to 20 mm spacing) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white Isdpfxjx Ipbae Agxstf ----Additional Information: * --Reinforced and certified bodywork to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Lead Time: Vehicle available immediately ex Egestorf

Condition: used, axle configuration: 2 axles, first registration: 02/1992, Year of construction: 1992, Equipment: ABS, Empty weight: 3.140 kg Carrying capacity: 14.860 kg GVW: 18.000 kg Itjdpfx Ajxt Sd Ssgxof Selling price: € 1.500, US$ 1.733 Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 09/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.600 kg Carrying capacity: 13.400 kg Itodpfx Agext Rw Rjxjf GVW: 18.000 kg Selling price: € 6.500, US$ 7.511 Tyre tread remainder on axle rear: 50% Make of axle rear: BPW Purchase on credit is possible: Yes

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference number for enquiries: 11612 * NEW VEHICLE, available immediately in RAL 9016 (traffic white), no prior registration * Delivery to your door available for an additional charge! * Gross vehicle weight: 11,900 kg, Payload: 8,750 kg * Galvanized floor 5m x 2.42m x 0.5m, side walls pendulum-mounted, foldable, and removable, prepared for later retrofitting with side board extension kits * Bulkhead/h front wall hot-dip galvanized * Lockable compartment under tipping platform for loading ramp Itodoyl Ebpjpfx Agxsf * Includes 3.31m loading ramps, 8t pair * 4 UVV tie-down rings LC 5000daN, located at front and rear * 8 recessed, foldable lashing eyes LC 3000daN in the tipper floor (centered) * Net hooks * Stepless height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Galvanized frame * Tyres: 235/75R 17.5 (4 units), BPW axles, parabolic springs * Tire pressure monitoring system * EBS (Electronic Braking System) * LED lighting system for 12V and 24V * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on front wall ---- Please request a detailed offer; additional equipment available upon request Financing available from only €405 (net) per month, 72 months term, no down payment, no residual value. An offer from our partner 'FM LeasingPartner.' ---- Our office hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of office hours, viewings by appointment. WhatsApp Leasing, financing, and trade-in possible----

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Iedpfx Asymuz Uegxetf Very well-maintained tandem flatbed trailer ZANDT Cargo * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Perm. gross weight 11,900 kg * Very good condition Trade-in possible Financing from 3.99% Errors and prior sale excepted! The details in this ad are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be verified separately. All information provided in the listings is non-binding! Delivery possible throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m., Friday from 9:00 a.m. to 2:00 p.m., and by appointment!

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Very well-maintained tandem flatbed trailer ZANDT Cargo * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Permissible total weight: 11,900 kg * Very good condition Trade-in possible Financing from 3.99% Errors and prior sale excepted! The information in this listing is non-binding descriptions and does not constitute guaranteed features. The seller assumes no liability for typing or data transmission errors. Listed equipment/features must be checked separately. All information in the advertisements is non-binding! Iodsymuz Ispfx Agxotf Delivery throughout Germany upon request Business hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 08/2026, loading space length: 4,800 mm, loading space width: 2,430 mm, loading space height: 500 mm, Equipment: ABS, Müller-Mitteltal low-loader tipper Iodoyk Rfkopfx Agxjtf - Low-loader and two-way tipper combined in a single vehicle - 40 mm towing eye - Air brake system - Support legs for loading and unloading - Gigant axles - Tyres: 235/75 R 17.5 - Drum brakes - Unladen weight: 3,620 kg - Height-adjustable drawbar - TÜV due: 08.2026 - Safety inspection (SP) due: 02.2026 - Loading area length: 4,800 mm - Loading area width: 2,430 mm - Side wall height: 0.5 m Errors and prior sale excepted. Internal vehicle number: 11349.

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: 3 in 1 = Suitable for roll-off, skip containers and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual lowering function at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * TPMS (tire pressure monitoring system), visualisation in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: Isdpfxsl Tld Ij Agxotf * Toolbox made of powder-coated sheet steel * Spare wheel holder in basket design, mounted right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bumper guards * Foldable rear A-plate ----Loading Area: * Hot-dip galvanized main frame with raised outer frame to guide roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, suitable for container lengths of 5,500 - 7,000 mm * Pneumatic 4-point locking clamps and mechanical plug-in stops at the front along the guideway * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip guides for lateral centering, front 4 skip guides are plug-in type with swing-out stops * Weld beads as anti-slip coating in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching securing elements to safely secure the skips, 4 lashing brackets each side in clover-leaf design * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t recessed lashing eyes on each side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Reflective contour tape on sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black ----Information: * Load securing certificates according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf