Used Faymonville Platform Semitrailers for sale (182)

Condition: new, empty load weight: 9,300 kg, maximum load weight: 38,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,200 mm, suspension: air, tire size: 385/65 R 22,5, color: grey-black, Equipment: ABS, Cargo bed: - Load surface in extendable design with pneumatically operated locking mechanism - Loading area with approx. 30 mm thick wooden floor - 7 pairs of lashing rings can be folded outwards (LC 5,000 daN) - 3 pairs of lashing rings can be folded outwards (LC 10,000 daN) - Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) Axles and tires: - BPW axles and suspension, all axles with hydro-mechanical forced steering - With disk brakes - Technical axle load: 10,000 kg - Air suspension with lifting and lowering valve - Axle tool - Tires: 385/65 R 22.5 - TPMS tire pressure monitoring system in accordance with ECE R 141 Brake system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets - Connection according to ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Gedpfx Agsiu Etrsujiu Accessories included: - Re-steering can be operated from the front and rear by cable remote control via pushbuttons, with toe-in control of the axles - 4 wheel chocks with holder on the front wall - 2" kingpin - One galvanized steel bulkhead approx. 1,600 mm high - Yellow-red air couplings on the galvanized connection strip at the front - White reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer in red - European reflector plates (red/yellow) at the rear of the trailer - A mud flap at the rear of the trailer - Manual and description - A bracket for a rotating beacon at the rear of the trailer - Loading area with approx. 30 mm thick wooden floor edged in omega profiles - 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed - 1 spare wheel holder under the cargo bed on the right in the direction of travel - Electro-hydraulic unit - On the gooseneck and on the rear panel on the left and right, one holder each for the warning signs including socket - A layer of sand painted onto the central beam to prevent slipping - 6 pairs of WADER container pockets in the loading area, for 1x20ft, 2x 20ft or 1x 40ft container, an additional locking point is provided in the pull-out for a 45ft container - 4 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions - Access ladder mounted on the right in the direction of travel - One HDPE tool box approx. 1,200 x 500 x 480 mm at the front under the cargo bed on the left in the direction of travel - Central lubrication system BEKAMAX (Pico) with removable protection around the pump - Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status - Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light - A holder for rotating beacon on the warning signs - Speed sticker 80 km/h at the rear and on both sides - Load manometer to determine the axle loads including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area Gsdsk Af Svspfx Agusiu -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5 3PMSF, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear slope of approx. 1,000 mm x 8° -6 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Axles and tires: -PW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electro-magnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: -JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -One bracket for rotating beacon at the rear of the trailer -Mounting in the rear area of the gooseneck for ALU trailer lights -Galvanized folding supports under the bevel of the cargo bed -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick Gsdpfxjuqlmns Agujiu -ALU drop sides and rear wall approx. 2,440 x 400 mm on the gooseneck -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -Four warning signs approx. 423 x 423 mm with one position light, extendable by approx. 400 mm -3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container -6 pairs of stanchion pockets 100x50 mm in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -A layer of sand painted onto the chequer plates, above the kingpin and the cargo bed to prevent slipping -On the warning plates a holder for rotating beacon -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 7,900 kg, maximum load weight: 41,600 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, operation weight: 7,900 kg, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface with rear slope of approx. 1,000 mm x 8° -Recess in the chamfer and protruding into the loading surface to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm Cut-outs in the outer frame of the cargo bed for attaching tensioning straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Giedeunrapepfx Agueu Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -TPMS tire pressure monitoring system in accordance with ECE R 141 -235/75 R 17.5 tires Paint finish: -Complete steel construction automatically blasted after welding with blast wheel system -second blasting with corundum for optimum adhesion of the coating system -Finishing coat with 2 layers of 2K top coat, single color in RAL MB 7350 nova grey -Rims painted in silver -Rear section metallized and painted in RAL 9010 (pure white) -Sealing of cavities with special wax Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 2x 7-pin & 1x15-pin Accessories included: -Extensive lashing positions -2" kingpin -One galvanized steel end wall approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm per side -White reflector tape in accordance with EU regulations on the sides and red at the rear -On the gooseneck and on the rear plate on the left and right, one bracket each for the warning signs including socket -ALU drop sides and rear panel can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Sliding attachment strip for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -Four warning signs that can be extended by approx. 400 mm, approx. 423 x 423 mm with a position light -One bracket for rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -European reflector plates (red/yellow) at the rear of the trailer -Manual and description on USB stick -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 12,800 kg, maximum load weight: 36,200 kg, overall weight: 49,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,550 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 12,800 kg, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm - Gooseneck hydraulically raised/lowered and removable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading area: - Low bed with external supports, designed as a telescopic tank bridge in a low construction with a front extension - Length 6,850 mm x Width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear chassis: - Rear chassis with closed outer frame with checker plate cover and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, suspension, and tires: - "PENDEL-AXLE", all Hydro-mechanically forced-steered axles - Hose rupture valve on the axle balancing cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle painting with two coats of 2-component acrylic paint in a single color "FAY-Gray-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system in accordance with ECE R 14 - TPMS tire pressure monitoring sensors installed in all wheels, including spare tires Accessories included: - Steel bulkhead, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches - One spare tire with mounting adapter - Gooseneck outer support with mounting holes for screwable lashing rings -Slidable aluminum side walls on the gooseneck, approx. 400 mm high, anodized -Slidable aluminum rear wall on the gooseneck, approx. 400 mm high, anodized -Checker plate covering above the gooseneck -Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide -Illuminated control panel on the gooseneck with on/off switch -Hydraulic crossbar for supporting the gooseneck on the tractor unit or a dolly -2" kingpin -Anti-slip sticker on the left slope of the gooseneck -Gooseneck closed at the rear upper area with a removable cover -4 chocks with brackets -Hydraulic connections from the gooseneck to the drop bed with multi-coupling instead of screw couplings -1 pair of steel ramps with climbing rails and fastening bolts for bridging the drop bed's hooks -The Ramps can be installed over or between the hooks. -Attachment option for the steel loading ramps at the rear between the outer supports of the gooseneck. -Prepared for screw-on container holders for 1x20f on the outer support. Giodpfxevy Edcs Aguou -Mechanical bolt-and-lug coupling from the low bed to the chassis, for replacing the loading area or installing extension supports. -With electro-pneumatic-hydraulic couplings. -The outer supports of the low bed are provided with a painted layer of sand as a slip protection. -Removable loading floor (galvanized) in 3 elements, insertable between the outer supports with hardwood flooring. -Foldable extensions, by approximately 230 mm per side. -Hanging rail at the front of the rear chassis to the low bed for loose loading ramps. -2 pairs of stake pockets recessed into the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm. -Hanging rail for loose Aluminum docking ramps on the vehicle's end crossbar -Central lubrication system with 2 pumps -Wireless and cable remote control -4 warning signs, approximately 423 mm x 423 mm extendable -Extensive lashing positions

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Giodpfxsmfqi Ie Agueu Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) -1 pair of lashing rings (LC 10,000 daN) -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: Giodpfxol Ux Rwe Aguou -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering -Axle tool -Twin tires 235/75 R 17.5 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable loading area: Loading area with hardwood planks with rear slope of approx. 1,000 mm x 8°    1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm     2 pairs of lashing rings (LC 5,000 daN)    1 pair of lashing rings (LC 10,000 daN)    6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)    2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)    Cut-outs in the outer frame of the loading area for attaching tensioning straps. (LC 2,000 daN)     Braking system:    Braking system in accordance with EU regulations with EBS-E (2S2M) Painting:    First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer     A high-quality 2-component (2K) top coat in a single color in Nova gray Rear section metallized and painted in RAL 9010 (pure white)     No metallic painting possible     Seatposts:     JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load)     Steel construction:     Steel construction made of high-strength fine-grain steels     Steel qualities:     S355J2+N/S355MC (yield point 355MPa)    S690QL/S700MC (yield point 690MPa)    Electrical system:    Electrical system in accordance with EU regulations, lighting 24 volts    Sockets 24N, 24S & 15-pin    Axles and tires:    BPW axles, air-suspended, with disc brakes (377 mm), with lifting/lowering function    The self-steering axles with electromagnetic reversing lock can be activated via reverse gear or manually    Axle tool    Tires 435/50 R 19.5    Gsdpfok Eammjx Agusiu Accessories included:    Yellow-red air couplings on the galvanized connection strip at the front    4 wheel chocks with brackets    2" kingpins    A galvanized steel bulkhead approx. 1600 mm high. EN12642-XL    White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red    Loading area with strong hardwood floor    9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area    1 spare wheel holder under the loading area on the right in the direction of travel    Galvanized folding supports under the slope of the loading area    Sliding hanging rails for aluminum loading ramps at the rear of the vehicle    European reflector signs (red-yellow) at the rear of the trailer    A mud flap at the rear of the trailer    A bracket for a rotating beacon at the rear of the trailer    On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket    A tool box HDPE 620x360x610 under the loading area on the left in the direction of travel    4 pairs of WADER container pockets in the loading area, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition Speed sticker 80 km/h at the rear and on both sides Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light. A holder for a rotating beacon on the warning signs Load gauge for determining the axle loads including load diagram HRM metallization (high resistance metallization) of the outer frame Complete steel construction shot blasted, then the defined visible areas in metallization

Condition: new, empty load weight: 11,300 kg, maximum load weight: 36,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 r 22,5, color: grey-black, Equipment: ABS, Cargo bed: Loading platform in extendable design with pneumatically operated locking mechanism There is an approx. 250 mm wide fixed intermediate table on the middle carrier 8 pairs of lashing rings can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Axles and tires: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lifting and lowering valve Axle tool 6-wheel tires 385/65 R 22.5 Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24 tons lifting load (50 tons test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Gsdpfx Ashlz Shjgujiu Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Accessories included: A bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket Re-steering can be operated from the front and rear using a cable remote control via pushbuttons, with toe-in control for the axles Electro-hydraulic unit 4 wheel chocks with holder on the bulkhead 2" kingpin One galvanized steel bulkhead approx. 2,200 mm high Yellow-red air couplings on the galvanized connection strip at the front White reflector tape in accordance with EU regulations on the side, on the pull-out and at the rear Red European reflector plates (red/yellow) at the rear of the trailer A mud flap at the rear of the trailer Manual and description A bracket for a rotating beacon at the rear of the trailer Loading area with approx. 30 mm thick wooden floor edged in omega profiles 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel 6 pairs of WADER container pockets in the cargo bed, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 5 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions One galvanized bracket transversely under the cargo bed (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE 1,200 x 500 x 480 mm toolbox at the front under the cargo bed on the left in the direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease and removable protection around the pump Red/white reflective tape in the load platform extension A layer of sand painted onto the central beam to prevent slipping Radio remote control for the steer

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram Godpfx Aoiu Etkoguoiu -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 8,300 kg, maximum load weight: 36,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,080 mm, suspension: air, tire size: 385/65 R 22.5, color: grey, Equipment: ABS, tail-lift, Cargo bed: Cargo bed in extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the cargo bed for attaching tensioning straps Seat posts: JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load Axles and tires: BPW axles, air-sprung, with disc brakes (430 mm), with raise/lower function The self-steering axle with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool 385/65 R 22.5 tires Brake system: WABCO brake system in accordance with EU regulations with EBS-E Paint finish: First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 Metallic paint is not possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Accessories included: Yellow-red air couplings on the galvanized connection strip at the front One galvanized steel end wall approx. 1,600 mm high. EN12642-XL 4 restraint shoes with bracket White reflective tape in accordance with EU regulations on the sides, on the extension and at the rear in red Gijdpfx Aeikyh Hjguou European reflector plates at the rear of the trailer Loading area with approx. 30 mm thick hardwood floor edged in omega profiles 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs including socket on the gooseneck and on the rear plate on the left and right respectively A layer of sand painted onto the central beam to prevent slipping 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container in the pull-out, an additional locking point is provided for a 45ft container 4 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions One galvanized bracket transversely under the cargo bed 2,390 x 720 x 400 mm Access ladder mounted on the right in the direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-peened, then the defined visible surfaces hot-finished in metallization with ZINACOR 850

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer Gjdpfjiuy Nlox Agueiu -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: new, maximum load weight: 36,020 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Equipment: ABS, Loading platform: Loading area in extendable design with pneumatically confirmed locking mechanism 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in one color Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDICK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool. Tires 435/50 R 19.5 Accessories included: Yellow-red air couplings on the galvanized connection strip at the front 2 wheel chocks with bracket 2" kingpin One galvanized steel bulkhead approx. 1,600 mm high. EN12642-XL. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer European reflector plates (red/yellow) at the rear of the trailer Loading area with approx. 38 mm thick hardwood floor 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description on USB stick One mud flap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer Godpfx Agoi Dwlwsuoiu A holder for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket One INOX toolbox transversely under the loading area (1,000 x 400 x 2,500 mm) 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft containers or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Rear speed sticker 60 km/h. 2 reversing lights mounted on the rear panel Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light A bracket for rotating beacon on the warning signs HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Year of construction: 2015, Damages: none YAFTL2007F0017329 = More information = Empty weight: 13.600 kg Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Giedpfsymrb Ssx Aguou No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, color: green, Year of construction: 2018, Faymonville F-S42-2ACB. Year: 2018. 12-ton Pendel-X axles. Max gross weight: 49,000 kg. Kingpin load: 25,000 kg. Hydraulic detachable gooseneck. Hydraulics operate on NATO connection from a truck. EBS, ABS, ALB. Spare wheel. Hydraulic suspension. Remote control via cable. Aluminium side boards and toolbox on neck. Extendable by 5.5 meters. Widened sections: 2 x 25 cm. Excavator trough: 2750 x 600 mm. Zinc-coated. Dimensions: Neck: L: 3650 mm W: 2500 mm H: 1550 mm Kingpin height: 1250 mm Deck: L: 8000 mm W: 2550 mm H: approx. 350 mm Deck thickness: 220 mm Rear of trailer: L: 2750 mm W: 2550 mm H: 1000 mm Giedpfx Asy A Ehlegueu Tyres: 245/70R17.5, 80% tread remaining German trailer! ID No: 465. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you are aware of these Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2018 Gross vehicle weight: 49,000 kg Extendable frame: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: used, color: blue, Year of construction: 2022, Faymonville Maxtrailer F-S42-2GXX. Year of manufacture: 2022. 12-ton Pendel-X axles. Unladen weight: 12,917 kg. Payload capacity: 34,083 kg. Gross vehicle weight: 47,000 kg. Kingpin load: 23,000 kg. Hydraulic detachable gooseneck. Aluminium sideboards + toolbox on gooseneck. Spare wheel. Hydraulics controlled via NATO connection from the truck. Extendable by 5.5 meters. 2 x 25 cm hydraulic widening. Radio remote control. Hydraulic suspension. Excavator trough 2600 x 700 mm. Galvanized. Dimensions: Neck: L: 3,700 mm W: 2,450 mm H: 1,450 mm Kingpin height: 1,150 mm Floor: L: 6,850 mm W: 2,550 mm H: 350 mm Floor thickness: 200 mm Giodpfxey A Edas Aguou Rear of trailer: L: 2,600 mm W: 2,550 mm H: 1,000 mm Tyres: 245/70R17.5 90% Like new! ID No: 509. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2022 Unladen weight: 12,917 kg Payload: 34,083 kg Gross vehicle weight: 47,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. Gisdpfx Agsy Ay Umeueu 10 tons SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Powersteering 3 steering axles. Airsuspension. Hydraulic bridge from floor to neck. - length: 3000 mm. Slitted floor. Winch. Hydraulic from trailer works on NATO electricity. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: - length: 2850 + 1750 mm. - Hydraulic from left to right. Dimensions: Neck: L: 3750 mm. W: 2500 mm. H: 1400 mm. Kingpin height: 1200 mm. Floor: L: 9550 mm. W: 2550 mm. H: 900 mm. Tyres: 245/70R17.5 80%. ID NR: 439. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of construction: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg Gross weight: 42,000 kg = Company Information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2018, Faymonville F-S42-2GXX. Year of manufacture: 2018. 12-ton Pendel-X axles. Giodoy Ay S Ejpfx Aguju Maximum gross weight: 49,000 kg. Kingpin load: 25,000 kg. Extendable by 5.5 meters. 2 x 25 cm extension, including widening. Galvanized (zinc-coated). Hydraulically detachable gooseneck. Aluminium side boards on the neck. Hydraulic suspension. Radio remote control. Excavator bridge: 3050 mm x 700 mm. 3 removable floor boards. Trailer hydraulics operate with NATO electricity. Dimensions: Neck: Length: 3,700 mm Width: 2,500 mm Height: 1,500 mm Kingpin height: 1,250 mm Floor: Length: 6,850 mm Width: 2,550 mm Height: 400 mm Floor thickness: 230 mm Rear section of trailer: Length: 3,050 mm Width: 2,550 mm Height: 950 mm Tyres: 245/70R17.5, 60% tread remaining. ID No.: 494. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, as well as all contracts concluded with Heinhuis and any negotiations preceding them. By responding in any form, you acknowledge the applicability of these General Terms and Conditions and declare that you have taken note of them. Our prices are net export prices. = Further information = Year of manufacture: 2018 Gross vehicle weight: 49,000 kg Extendable chassis: Yes = Company information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2016, Faymonville F-S43-1BGS. Year of manufacture: 2016. SAF axles: 9 tons. Unladen weight: 9,030 kg. Maximum gross weight: 45,000 kg. King pin load: 18,000 kg. Extendable by 7.5 meters. Hydraulics operated via NATO connection from the truck. EBS, ABS, ALB. Radio remote control. Power steering with 3 steering axles. Air suspension. Prepared for twistlocks. Loading platform dimensions: Length: 13,600 mm. Width: 2,550 mm. Height: 1,480 mm. Tyres: 385/65R22.5 with 50% tread remaining. ID no.: 561. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all contracts concluded by Heinhuis, and all preliminary negotiations. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have read and understood these General Terms and Conditions. Our prices are net export prices. = More information = Year of construction: 2016 Unladen weight: 9,030 kg Payload: 35,970 kg Gross vehicle weight: 45,000 kg Gijdsy Ay Srjpfx Agusu Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, Year of construction: 2018, Faymonville Maxtrailer F-S43-1AAF. Year: 2018. 9-ton SAF axles. Unladen weight: 9,961 kg. Maximum gross weight: 45,000 kg. Kingpin load: 18,000 kg. Power steering with 3 steering axles. Extendable up to 7.5 meters. Air suspension. Stainless steel toolboxes. Radio remote control. First axle lift axle. EBA ABS ALB. Loading platform dimensions: Length: 13,550 mm Width: 2,480 mm Height: 1,400 mm Height with aluminum sideboards: 600 mm Tyres: 385/65R22.5, tread depth 70% ID No.: 513 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements concluded by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of Heinhuis's General Terms and Conditions and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. Gisdpfx Aoy Ay R Iogusu = Further information = Year of manufacture: 2018 Unladen weight: 9,961 kg Payload: 35,039 kg Gross vehicle weight: 45,000 kg Extendable body: Yes = Company Information = For more information: WhatsApp:

Condition: used, color: blue, Year of construction: 2017, Faymonville F-S42-1ACA. Year: 2017. 11.2 Tons SAF axles. Weight: 12,110 kg. Load capacity: 25,890 kg. Max weight: 38,000 kg. Kingpin load: 18,000 kg. EBS ABS ALB. Hydraulic from trailer works on NATO. Hydraulic detachable goosneck. Air suspension. Sparetyre. Power steering. Radio remote control. 5 meter extandable spinbed-excavator bed. Dimensions: Neck: L: 4000mm. W: 2550mm. H: 1550mm. Gijdjy Ay N Rspfx Agusu Kingpin height: 1200mm. Floor: L: 6300mm. W: 1000 - 2540 - 3000mm. H: 450mm. Thickness floor: 300 mm. Backside trailer: L: 2800mm. W: 2550mm. H: 950mm. Tires: 235/75R17.5 80%. 2 pieces available! German Trailer! ID NO: 596. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of manufacture: 2017 Empty weight: 12,110 kg Payload: 25,890 kg GVW: 38,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2020, Faymonville F-S43-1AAF Year of manufacture: 2020. 12-ton SAF axles. Maximum permissible weight: 61,000 kg. Kingpin load: 25,000 kg. Power steering, 3 steering axles. Hydraulics compatible with NATO (military standard connections). EBS, ABS, ALB. 2x extendable: 1st extension: 8.15 meters. 2nd extension: 8.45 meters. Total length: 16.5 meters! Toolbox + aluminium sideboards on gooseneck. 2x widened by 25 cm. Radio remote control. Spare tyre. Hydraulic suspension (individually adjustable left and right). Central lubrication system. Zinc-coated. Additional intermediate table: 50 cm. 2-way hydraulic ramps: - Length: 2800 mm + 1400 mm. - Hydraulically movable from left to right. Dimensions: Neck: Gsdpsy Ay Ndjfx Agujiu Length: 3,650 mm. Width: 2,550 mm. Height: 1,550 mm. Kingpin height: 1,300 mm. Floor: Length: 12,000 mm. Width: 2,550 mm. Height: 950 mm. Tyres: 245/70R17.5, 80% tread remaining. Top condition! ID No.: 601. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations made by Heinhuis, all contracts entered into by Heinhuis, and the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you are familiar with their contents. Our prices are net export prices. = Further information = Year of manufacture: 2020 Gross vehicle weight (GVW): 61,000 kg Extendable platform: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load Capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering 3 steering axles. Slitted floor. Wink. Allu boards on neck. Hydraulic from trailer works on NATO. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3000mm. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: Lenght: 2800 + 1700 mm. Dimensions: Godpfxoy Ayz He Aguoiu Neck: L: 3750mm. W: 2500mm. H: 1380mm. King pin height: 1150 mm. Floor: L: 9600mm. W: 2550mm. H: 900mm. Tires: 245/70R17.5 80%. ID NO: 436. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2013 Curb weight: 12,300 kg Payload: 29,700 kg GVW: 42,000 kg = Company information = For more information: WhatsApp:

Condition: used, color: blue, Year of construction: 2016, Faymonville F-S43-1ABA. Year: 2016. 10 tons SAF axles. Weight: 12,600 kg. Load capacity: 29,400 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Hydraulic works on NATO. Allu boards on neck. Winch with Remote Control. Hydr. bridge from floor to neck. - Lenght: 3000 mm. Airsuspension. Slitted floor. Powersteering 3 steering axles. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: - length: 2850 + 1750 mm. - hydr. from left to right. Dimmensions: Neck: L: 3750 mm. W: 2500 mm. H: 1350 mm. Kingpin height: 1150 mm. Floor: L: 9600 mm. W: 2500 mm. H: 900 mm. Tyres: 235/75R17.5 80%. German Trailer! ID NR: 437. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2016 Gedpfx Agjy Ayyisuoiu Unladen weight: 12,600 kg Payload: 29,400 kg GVW: 42,000 kg = Company information = For more information: WhatsApp:

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full inventory of vehicles, including those available immediately or at short notice, on our website. Partial equipment overview. Full equipment details available on request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Load area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate over axles Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 205/65 R17.5 - brand of our choice Giodpfx Asy Aug Dsguou TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Braking system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, 24 volt ASPÖCK-NORDIK LED lighting (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM-metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Rims Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, a holder for warning signs each, including socket * 2" kingpin * One galvanized steel front wall * At the galvanized connection bar at the front, yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Holder for beacon at the rear of the trailer * Height-adjustable tarpaulin frame – approx. 3,960 mm * Galvanized front wall with tensioning mechanism for sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA brand roof, sliding forward on ALU roof beam profiles (bolted with front and rear wall) * In the loading area 3 pairs of sliding stakes * Body can be hydraulically extended at the rear to the left and right by approx. 750 mm * Sliding roof with pivotable portal beam * Sliding tarpaulin with 700 mm excess length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear body closed with anodized ALU double-wing doors * Hook-on bar for ALU approach ramps at the rear of the vehicle * Control valves for hydraulic width extension located on the right-hand side of the trailer * White reflector tape according to EU regulations, red at the rear * Electro-hydraulic unit at the rear under the loading area * One mud flap at the rear of the trailer * European reflector boards (red-yellow) on the rear of the trailer * Hand