Used Faymonville Platform Semitrailers for sale (145)

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: Todpfsxbmplox Ahkod * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: used, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 10/2027, total length: 13,150 mm, total width: 2,540 mm, total height: 890 mm, Year of construction: 2023, Additional information: * Maximum axle load | First axle: 10500 kg * Maximum axle load | Second axle: 10500 kg * Maximum axle load | Third axle: 10500 kg * Tire size | First axle: 235/75 R17.5 * Tire size | Second axle: 235/75 R17.5 * Tire size | Third axle: 235/75 R17.5 * Tire tread depth outer left | First axle: 30% * Tire tread depth inner left | First axle: 30% * Tire tread depth outer right | First axle: 30% * Tire tread depth inner right | First axle: 30% Tjdpfxo Af D Tgo Ahkjd * Tire tread depth outer left | Second axle: 30% * Tire tread depth inner left | Second axle: 30% * Tire tread depth outer right | Second axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth outer left | Third axle: 50% * Tire tread depth inner left | Third axle: 50% * Tire tread depth outer right | Third axle: 50% * Tire tread depth inner right | Third axle: 50% * Type | First axle: Goodyear R * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Twin wheels | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Twin wheels | Second axle: Yes * Twin wheels | Third axle: Yes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request you to inquire about the costs and procedures applicable in your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: good (used), functionality: fully functional, empty load weight: 10,320 kg, maximum load weight: 34,680 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2005, Manufacturer: Faymonville Type: ILO 3 / 3-axle Year: 2005 Tare weight: 10,320 kg Payload: 34,680 kg Tsdpsz D Dvlefx Ahked Gross vehicle weight: 42,000 kg Length: 13.30 m

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Equipment: ABS, = Additional Options and Accessories = - Central lubrication system = Notes = Faymonville Jeep dolly D3 Year 2006. 1 x lift axle. 1 x friction steering axle / trailing arm steering. Air suspension. Max. technical weight: 56,000 kg. Faymonville STBZ-5VA Year 2006. Swivel axle. Removable gooseneck. Movable table. Extendable bed: 400 cm. Loading bed: 650 + 400 cm. 50,000 kg gooseneck capacity. Max. technical weight: 119,680 kg. = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; tire tread depth left inside: 15%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: air suspension Front axle 2: Twin tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 40%; tire tread depth right outside: 60%; suspension: air suspension Front axle 3: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 70%; tire tread depth right inside: 60%; tire tread depth right outside: 70%; suspension: air suspension Rear axle 1: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 70%; suspension: hydraulic suspension Rear axle 2: Twin tires; steerable; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 30%; tire tread depth right outside: 75%; suspension: hydraulic suspension Rear axle 3: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: hydraulic suspension Rear axle 4: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 50%; suspension: hydraulic suspension Rear axle 5: Twin tires; steerable; tire tread depth left inside: 70%; tire tread depth left outside: 70%; tire tread depth right inside: 20%; tire tread depth right outside: 70%; suspension: hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 99,400 kg GVW: 136,000 kg Financial information Price: On request Identification Tsdpfx Ahoxbng Eokod Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 11/2017, total length: 135,000 mm, total width: 2,540 mm, total height: 780 mm, color: black, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = General information Year of manufacture: 2017 Axle configuration Tjdpfx Aheyx Hwyeksd Rear axle 1: Max. axle load: 8000 kg Rear axle 2: Max. axle load: 8000 kg; Steerable Rear axle 3: Max. axle load: 8000 kg; Steerable Rear axle 4: Max. axle load: 8000 kg; Steerable Weights Unladen weight: 14,800 kg Payload: 42,200 kg GVW: 57,000 kg Condition Technical condition: good Visual condition: good Damage: none Financial information Price: On request Further information Please contact David F. Middelman for more information.

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall vehicle width: 2990 mm Platform length: 15000 mm Telescopic: Yes / Extension length 1: 8000 mm Fifth wheel height: 1415 mm Fifth wheel load: 30,000 kg Axle load: 96,000 kg Tare weight: 24,150 kg Maximum permissible load: 126,000 kg Tsdpfez Ed D Eox Ahked Payload: 89,800 kg

Condition: new, maximum load weight: 40,017 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: 5 pairs of folding external lashing rings (LC 5,000 daN). 3 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN). Approx. 48 mm thick hardwood flooring, checker plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 205/65 R17.5 tyres as per manufacturer's specification. TPMS: TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit via the standardised EBS interface according to ISO 11992. To ensure correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles, two fixed axles, two self-steering axles, air-suspended, with drum brake, with lifting/lowering function. The self-steering axles can be locked electronically via reverse gear or manually using an electromagnet. Axle tools included. Brake System: Tsdpew Dl Hqsfx Ahked WABCO brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3). All LED side marker lamps flash with the turn indicators. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections conform to ISO standards: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: The entire steel structure is automatically shot-blasted with a turbine system after welding. A second abrasive blasting treatment with corundum ensures optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection. Final coating with 2 coats of 2K topcoat, single-colour in a shade of your choice according to the RAL 841GL system. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Paint system tested in salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options included: 2" kingpin One galvanized steel bulkhead. Yellow-red air couplings on the galvanized front connection panel. 2 wheel chocks with holders on the bulkhead. Fixture at the rear of the gooseneck for ALU approach ramps. Further options upon request.

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements Tedpfx Aoxarmaohksd * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, total length: 19,000 mm, total width: 600 mm, total height: 450 mm, Color: Red Load capacity: 430,000 kg Expandable Manufacturer: Faymonville Type: G-Module Vessel Deck Year: 2022 Connectable to Goldhofer THP SL Coupling Heads Todpfxsuu Hixo Ahkod G-Module-SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically widenable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression joint in front and rear Color: RAL 3002 Extension Beams 1 pair of extension beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint in front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 connecting lines kit for coupling pin G-Module = Further information = Year of manufacture: 2022 Design year: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Optical condition: very good Price: On request

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick Todpfxjz Sh H Hs Ahkjd * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Top coat with 2 layers of 2K topcoat, solid color in R

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Tedpfeizu Ntox Ahkod Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Todpfx Ahjzlmkwokod Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick Todpozvt Tyofx Ahkod * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Saddle load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3750 mm Saddle height loaded: 1200 mm Rear overhang: 2300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Frame length: 2,600 mm Loading height, rear frame at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle track: 1360 mm Overall width: 2,540 mm Total weight depends on the saddle load. Low-bed: Low-bed with external, extendable beams. "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking mechanism. The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of lashing rings, foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear frame: Rear frame with closed outer frame, diamond-plate flooring and continuous prism-shaped excavator well, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). 1 pair of lashing rings lying in the well (LC 8,000 daN + 5,300 daN). 2 pairs of stake pockets for stake pockets 100 x 50 mm in the outer frame. Gooseneck: Gooseneck in SNT design for optimizing the loading area length, length approx. 3,785 mm. Gooseneck hydraulically adjustable up/down and extendable. Technical saddle load: 23,000 kg For semi-trailer tractor: 4x2, 6x2 and 6x4 PENDULUM AXLE: "PENDULUM AXLE", all axles hydro-mechanically forced steered. Hose burst valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and quick-release coupling for securing in the raised position. Final coating of the axles with 2 layers of 2-component paint, solid color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle equalization. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor. Electrical system: Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: Tjdpsizu Nwofx Ahked S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat, solid color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (Pure White). Metallic paint not possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's option. Load index (146/146F) Preparation for mounting screwable container positioning for 1 x 20' or 1 x 40' container on the outer beams. Without container locking mechanisms. i i2" Kingpin iA galvanized steel front wall, approx. 400 mm high. iA spare wheel with holder in front of the front wall. i2 pieces of wheel chocks with holder on the front wall. iYellow-red air couplings on the galvanized front connection bar. Steering from the front and rear by means of a cable remote control via push buttons, with single-axle control. (without installation in the semi-trailer tractor) i Hydrauli

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF Tedpfx Ahoyib Ahjked * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: new, overall weight: 78,000 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 850 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: • Gooseneck in SNT design for optimizing load platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10° • Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Load Platform: • Extendable load platform, approx. 8,800 mm long with rear chamfer of approx. 500 mm x 10° • Recess in the load platform and chamfer area for receiving excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • Pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulic foldable ramp ends • Ramps can be hydraulically moved individually by approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the chamfered section of the load platform • Ramps with hardwood covering • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW axle stub, 1st axle steering, all other axles forced steered via hydromechanical system • 1st axle with electro-magnetic reverse lock, activated automatically in reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories included: • Detachable steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection strip • 3 kW electro-hydraulic power pack for operation of hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • On the gooseneck: 1 pair removable ALU side boards, approx. 400 mm high, anodized • On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering over the king pin • 3.5" king pin • Gooseneck guide plate for fifth wheel, approx. 500 mm wide Tsdpfx Ahjrvw U Ssksd • Load platform locking with conically welded locking profiles every 250 mm • Includes pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the load platform • Extendable (galvanized) outriggers, approx. 230 mm each side • 1 pair of built-in open wheel recesses to the extension, approx. 700 x 410 mm, in the load platform in front of the 1st axle • Wheel recesses with steel plating and 15 x 15 mm square climbing bars, approx. every 200 mm • 1 pair of built-in wheel recesses, approx. 1,480 x 700 x 410 mm, in the load platform between the 1st and 2nd axles • Wheel recesses with 15 x 15 mm square climbing bars and extensions in the lower area • ALU covers for the wheel recesses between the 1st and 2nd axles, usable as widening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the chamfered load platform • Central lubrication system with 1 pump, brand BEKAMAX, for standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single-track control • WABCO Smart Board System • Smart Board equipped with odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 marker lights and holders for beacon

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) Todpfxezlwm As Ahked * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2010, loading space length: 136,600 mm, loading space width: 2,500 mm, total length: 206,600 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, tire condition: 40 %, color: other, Equipment: ABS, = Additional options and accessories = - 3 axles - Air suspension - Disc brakes - Lift Axle - Steering Axle Tjdpfx Ahez S Ukqekjd = More information = General information Year of construction: 2010 Registration number: QKW546 Axle configuration Tyre size: 385/65 R22.5 Tyre profile: 40% Suspension: air suspension Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 10.000 kg Carrying capacity: 35.000 kg GVW: 45.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards Tedpfxoy Auhue Ahkod * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: used, overall weight: 42,000 kg, first registration: 06/2013, total width: 2,550 mm, total height: 4,000 mm, Manufacturer: Faymonville Model: Euromax Year of manufacture: 2013 Product type: Used Specifications: First registration: 13/06/2013 Overall dimensions LxWxH: 13.50 x 2.55 x 4 m Gross vehicle weight rating: 42,000 kg Unladen weight: 10,900 kg Location: 45143 Essen Immediately available Tedpfxsyr Uyzo Ahkjd

Condition: used, overall weight: 44,000 kg, axle configuration: 2 axles, first registration: 04/2018, Unladen weight: 11,800 kg W = 12,000 mm Extendable forward for front loading of the attached flatbed trailer - Gooseneck in a compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" kingpin - Integrated hydromechanical steering - Hydraulic lifting and lowering function, including support cylinders - Designed for a technical fifth-wheel load of up to 24 tons - Aluminum side walls, 4-sided - Turning radius: 2,200 mm Flatbed trailer - Low-bed with external tubes - Flatbed length: 6,750 mm, telescoping to 12,250 mm (extension of 5,500 mm) Tsdoy U Df Hepfx Ahkod - Flatbed width: 2,550 mm - Height: 200 mm - Loaded height: approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Coupling jaws at the front for connection to the gooseneck 2-axle chassis - Chassis in a compact design - Air-suspended chassis (L x W): approx. 2,750 x 2,550 mm including lifting and lowering valve, with 2 forced-steered axles, manufacturer BPW, track width 1,330 mm - Chassis with kingpin recess Braking system - Two-line, all-wheel air brake system - Progressive central lubrication system - Remote control - Loaded fifth-wheel height: 1,250 mm - All 2 axles hydraulically forced-steered

Condition: used, axle configuration: > 3 axles, first registration: 01/2016, total length: 14,450 mm, total width: 2,750 mm, total height: 3,400 mm, suspension: hydraulics, tire size: 245/70 R17.5, color: other, Equipment: ABS, = Additional options and accessories = - Lift Axle - Steering Axle = Remarks = Chassis Kingpin / fifth wheel diameter: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Superstructure Year of manufacture: 2016 Special Transport 2-piece ramps: ✓ Hydraulic ramps: ✓ Length of loading floor: 985 cm Gooseneck length: 330 cm Max width: 325 cm ( 25 + 25 ) Expandable: ✓ Extendable: ✓ Extendable semi-lowbed trailer, Year of construction 2016, Max gross weight 73.000 kg loadbed lenght 985 cm, Load bed width 275 cm, Load bed height 90 cm, Gooseneck lenght 330 cm, Hydraulic ramps, Winch, Forced steering, ABS, Drum brakes, Hydraulic suspension, SAF axles, Lift axle, 3 steering axles, Tire size 245/70 R17.5, Radio control, Shipment dimensions 1445x275x340 cm Tedpj Adrd Rofx Ahkjd = More information = General information Year of construction: 2016 Registration number: V3971309 Axle configuration Make axles: Saf Brakes: drum brakes Suspension: hydraulic suspension Front axle: Tyre size: 245/70 R17.5; Double wheels; Lift axle; Tyre profile left outer: 15%; Tyre profile right outer: 25% Middle axle 1: Tyre size: 245/70 R22.5; Double wheels; Steering; Tyre profile left outer: 35%; Tyre profile right outer: 20% Middle axle 2: Tyre size: 245/70 R22.5; Double wheels; Steering; Tyre profile left outer: 25%; Tyre profile right outer: 25% Rear axle: Tyre size: 245/70 R22.5; Double wheels; Steering; Tyre profile left outer: 30%; Tyre profile right outer: 20% Weights GVW: 73.000 kg Functional Make of bodywork: Faymonville = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, empty load weight: 9,450 kg, maximum load weight: 35,550 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 1,560 mm, total width: 2,550 mm, tire size: 385/65 R 22,5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck designed as a loading deck, fitted with aluminum chequer plate - Front tapered approx. 45° - Hydraulic lifting arm, lift/lower range approx. -280/+250 mm - Two kingpin positions at 2,300 mm and 2,000 mm from DSR - Suitable for tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, length approx. 9,500 mm, with bottom-mounted angle profiles for pallet mounting (distance from kingpin to center of axle assembly approx. 8,000 mm) Axles, Suspension and Tyres: - BPW stub axles, with drum brakes and independent wheel suspension, hydraulic axle compensation with lift and lower function - Axle lowering lock in case of suspension airbag failure, designed for max. pallet height 150 mm - Tyres: 385/65 R 22.5 Tedpjygvc Hsfx Ahksd - TPMS tyre pressure sensors installed in all wheels including the spare - TPMS tyre pressure monitoring system compliant with ECE R 141 Surface Treatment: - Entire steel structure automatically shot-blasted after welding using a turbine blasting system - Second blasting with corundum to optimise coating adhesion - HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with two layers of 2K topcoat, single colour in Novagrau (DB 7350) - Paint system tested in salt spray test to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid, integrated in the rear section of the gooseneck, approx. 640 x 700 x 215 mm - Removable aluminium rear wall on the gooseneck, approx. 400 mm high, anodised - One pair of folding aluminium sideboards on the gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings; operation lighting for the gooseneck, suspension, and hydraulic load restraints with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Access ladder mounted front right with 2 detachable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings (LC 6,300 daN) mounted on the longitudinal beams - Grating platform, level with the guiding rails for load securing, fitted to the longitudinal beams - Hydraulic preparation, including control unit, for mounting 3 pairs of our hydraulic load restraints - First and last axle manually liftable on left and right - Storage box behind axle assembly, left and right, splash-proof - Tapered rear edge for easier pallet loading - Rear lashing eyes mounted on the tail crossmember for mechanical bracing - 7-pin socket on the tail crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side incl. axle load diagram - 3 pairs of hydraulic load restraints with swivel arms, moveably mounted to longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, can be secured horizontally at 90°, 105°, and 270° - Folding underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate holder including lighting, rear left on the trailer - Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, brand BEKAMAX, standard grease version

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish Tedpsyhkqujfx Ahksd CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tsdpfx Ajw Tgp Djhksd * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle