Flatbed

Faymonville Telemax EXTENDABLE / ALL AXLES STEERED

Condition: used, axle configuration: 3 axles, first registration: 04/2009, total length: 13,800 mm, total width: 2,550 mm, suspension: air, Additional information : Brand: FAYMONVILLE Model: Telemax Structure: low loader ( platform L=13330-17530 mm extendable / H=1400 mm ) Year: 01.2008 Suspension: air Brakes: drum Dimensions: L/W: 13800 mm / 2550 mm Masses: full/empty: 59000 kg / 11310 kg ALL STEERED AXLES Model year : 2007 Suspension type : air Brakes : Drum Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Hnodezhvqlopfx Afxsu Brakes : Drum Steering : Steering = More information = Year of construction: 2009 Suspension: air suspension Middle axle: Steering Rear axle: Steering Empty weight: 11.310 kg Carrying capacity: 47.690 kg GVW: 59.000 kg Please contact Mark Ševtšenko or Alejandro Goyeneche for more information

Condition: new, empty load weight: 9,450 kg, maximum load weight: 35,550 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 1,560 mm, total width: 2,550 mm, tire size: 385/65 R 22,5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck designed as a loading deck, fitted with aluminum chequer plate - Front tapered approx. 45° - Hydraulic lifting arm, lift/lower range approx. -280/+250 mm - Two kingpin positions at 2,300 mm and 2,000 mm from DSR - Suitable for tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, length approx. 9,500 mm, with bottom-mounted angle profiles for pallet mounting (distance from kingpin to center of axle assembly approx. 8,000 mm) Axles, Suspension and Tyres: - BPW stub axles, with drum brakes and independent wheel suspension, hydraulic axle compensation with lift and lower function - Axle lowering lock in case of suspension airbag failure, designed for max. pallet height 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure sensors installed in all wheels including the spare - TPMS tyre pressure monitoring system compliant with ECE R 141 Surface Treatment: - Entire steel structure automatically shot-blasted after welding using a turbine blasting system - Second blasting with corundum to optimise coating adhesion - HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with two layers of 2K topcoat, single colour in Novagrau (DB 7350) - Paint system tested in salt spray test to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Removable steel front wall, approx. 400 mm high Hedpfoygvc Hox Afxonu - Tool box with lid, integrated in the rear section of the gooseneck, approx. 640 x 700 x 215 mm - Removable aluminium rear wall on the gooseneck, approx. 400 mm high, anodised - One pair of folding aluminium sideboards on the gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings; operation lighting for the gooseneck, suspension, and hydraulic load restraints with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Access ladder mounted front right with 2 detachable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings (LC 6,300 daN) mounted on the longitudinal beams - Grating platform, level with the guiding rails for load securing, fitted to the longitudinal beams - Hydraulic preparation, including control unit, for mounting 3 pairs of our hydraulic load restraints - First and last axle manually liftable on left and right - Storage box behind axle assembly, left and right, splash-proof - Tapered rear edge for easier pallet loading - Rear lashing eyes mounted on the tail crossmember for mechanical bracing - 7-pin socket on the tail crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side incl. axle load diagram - 3 pairs of hydraulic load restraints with swivel arms, moveably mounted to longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, can be secured horizontally at 90°, 105°, and 270° - Folding underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate holder including lighting, rear left on the trailer - Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, brand BEKAMAX, standard grease version

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel Hnsdpfx Afoyvnd Noxju * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 09/2000, loading space length: 362,000 mm, loading space width: 2,540 mm, loading space height: 1,380 mm, total length: 362,000 mm, total width: 2,540 mm, total height: 1,380 mm, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = Hnsdpfx Asza A H Sofxju - Air suspension - Central lubrication system = Additional Information = Axle configuration Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 13,240 kg Payload: 34,760 kg GVW: 48,000 kg Functional Height of the loading platform: 138 cm Condition Technical condition: very good Optical condition: very good Damage: none Financial information Price: Upon request

Condition: used, first registration: 02/2008, Year of construction: 2008, Schmidt Hagen SP/42/E/13.5-21.5 *3-axle flatbed semi-trailer*steering axles*ALCOA* !!! Very good condition !!! ● ABS ● Air suspension ● Lift/lowering system ● Floor height: 1,420 mm ● Alcoa Dura-Bright rims ● 3 x Mercedes axles with disc brakes ● All 3 axles are steerable! ● Tyres: 385/55 R 22.5 ● Tread depth: 3/2 / 5/4 / 5/6 mm ● Gross weight: 42,000 kg ● Unladen weight: 10,200 kg ● Payload: 31,800 kg - German trailer - TÜV / inspection: available new upon request and for an additional charge! Hnsdpfx Aoyutxzefxju Errors and prior sale excepted! = More information = Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, color: black, Year of construction: 2019, Faymonville F-S43-1AAF. Year: 2019. 9-ton SAF axles. Max. weight: 45,000 kg. Hedpfxjzyrfvo Afxsnu Kingpin load: 18,000 kg. 7.4-meter extendable. Power steering on 3 steering axles. Air suspension. Hydraulic system powered by NATO electricity. ABS EBS ALB. Floor dimensions: L: 13,550 mm. W: 2500 mm. H: 1450 mm. H: Aluminum sideboards: 600 mm. Kingpin height: 1250 mm. Tires: 385/65R22.5, 70% tread. ID No.: 489. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2019 GVW: 44,999 kg Price: On request = Company information = For more information:

Condition: used, maximum load weight: 27,500 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2024, loading space length: 7,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, loading space volume: 18 m³, Equipment: ABS, Exceptionally robust semi-trailer for concrete blocks, long materials, and general cargo, with a very high point load capacity. Hedpfxezt Uf Se Afxjnu New price according to Gloria’s list price: EUR 91,500 net plus VAT. * Axle 1: 9,000 kg * Axle 2: 9,000 kg * SAF wide-track axles with disc brakes for 22.5" tires * Stable steel welded construction made of laser-cut and bent high-quality fine-grain and structural steels * 4 Gloria combination rails for inserting square profiles of 70x70 mm, installed along the entire length in the direction of travel * Each intermediate bar can be used as a lashing point with LC = 2,000 daN * Body length approx. 7,500 mm * Overall length approx. 7,750 mm * 1,200 mm high * Side wall height 1,000 mm * Side wall lifting aid via gas springs with locking in the folded-down position * Forced steering of the last axle via mechanical 1-rod forced steering system from Tridec * Air suspension for all axles * First axle as a lift axle * Rear underrun protection as an aluminum profile according to current regulations * Chassis - welded assembly and front panel completely hot-dip galvanized * Storage box made of stainless steel * Work/reversing lights * Rear warning light LED * Rearview camera * Disc brake * ABS * Air suspension lift * 2x storage boxes * EBS * Support legs * SAF axles All information is subject to change without notice / subject to prior sale.