Used Faymonville Semitrailers for sale (185)

Condition: used, machine/vehicle number: YAFTL408100008968, axle configuration: > 3 axles, first registration: 01/2008, total length: 13,400 mm, total width: 2,750 mm, total height: 3,400 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2008, = Additional options and accessories = - Drum brakes - Steering Axle = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Gjdpfjxhgirox Anqokb Construction year: 2008 Faymonville extendable 4-axle semi-lowbed trailer type STN 4AU, Gross weight 65000 kg, Load bed lenght 910 cm, Max load bed lenght when extended..... cm, Max load bed width 3 cm (275 cm), Load bed height 90 cm, Hydraulic ramps, Ramp width 85 cm, Air suspension, 2 passive steering axles, Gigant axles, Drum brakes, ABS, Tire size 245/70R17.5, Double tires, Shipment dimensions 1340x275x340 cm = More information = Axle configuration Make axles: Gigant Brakes: drum brakes Suspension: air suspension Front axle: Tyre size: 245/70 R17.5; Tyre profile left: 60%; Tyre profile right: 35% Middle axle: Tyre size: 245/70 R22.5; Tyre profile left: %; Tyre profile right: 50% Rear axle 1: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 45%; Tyre profile right: 20% Rear axle 2: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 50%; Tyre profile right: 60% Weights Empty weight: 17.500 kg Carrying capacity: 47.500 kg GVW: 65.000 kg Functional Make of bodywork: Faymonville = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. Godpjxbmplofx Anqskb * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Gkedpfov Sw E Ajx Anqob Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, empty load weight: 10,900 kg, maximum load weight: 27,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2023, suspension: air, tire size: -, Year of construction: 2023, Equipment: ABS, ref: VO26-2220 SYLTRAILER FOR SALE? Faymonville F-S43-1AAF Lowboy Trailer? 3 Axles? 2023 - GENERAL INFORMATION Make / Model: Faymonville F-S43-1AAF Type: Lowboy trailer Year: 2023 Color: Black Chassis number: YAFTL3002P003 - TECHNICAL SPECIFICATIONS Number of axles: 3 Suspension: Air suspension - WEIGHTS & CAPACITIES Gkjdpozrzm Tofx Anqsb Unladen weight: 10,900 kg GVWR: 38,000 kg (Other GVWR: 61,000 kg) - EQUIPMENT Hydraulic loading ramps Air suspension High-strength, low chassis Reinforced deck for heavy equipment Pneumatic braking system with ABS / EBS Numerous integrated lashing points - HIGHLIGHTS Faymonville F-S43-1AAF 2023 3 axles Air suspension Hydraulic ramps High-strength reinforced chassis Unladen weight: 10,900 kg GVWR: 38 tons (Other GVWR: 61 tons) ---- Price: Please inquire Delivery time (in days): 1 ABS Serial number: YAFTL3002P003

Condition: used, color: red, Year of construction: 2015, Faymonville F-S43-1A1Y. Gksdpfszyaxwjx Anqob Year: 2015. 9-ton SAF axles. Weight: 10,190 kg. Maximum weight: 45,000 kg. Kingpin load: 18,000 kg. 5.75m extendable. Power steering, 3x forced steering. Hydraulic system powered from the trailer, operates on NATO electricity. Air suspension. 1st axle is a lift axle. Dimensions: Floor: Length: 13,750 mm. Width: 2,550 mm. Height: 1,400 mm. Height (with aluminum boards): 600 mm. Tires: 385/65R22.50, 70% tread remaining. ID No.: 661 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2015 Unladen weight: 10,190 kg Payload: 34,810 kg GVW: 45,000 kg Extendable platform: Yes = Company Information = For more information:

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Gedpsx Upxxefx Anqjkb Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Gjdjxf Silopfx Anqokb Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 Gsdpfxorgzv No Anqskb * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, first registration: 06/2017, total length: 7,000 mm, total width: 2,500 mm, total height: 880 mm, suspension: air, tire size: 235/70 R17.5, tire condition: 75 %, color: other, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - 2 axles - Air suspension Godpfx Anjzzi Uqsqjkb = More information = Axle configuration Tyre size: 235/70 R17.5 Tyre profile: 75% Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 10500 kg Rear axle 2: Double wheels; Max. axle load: 10500 kg Weights GVW: 21.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: QALO590

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Gksdpfx Ajzlmkwsnqeb Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, maximum load weight: 33,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 01/2027, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, Extendable semi-trailer, overall length adjustable from 7700 mm to 21300 mm, 9 stake pockets per side, 9 lashing points per side, all-round warning light / rear and center, extendable warning signs, JOST support jacks, central lubrication system, continuous underfloor box, ABS, EBS, SAF axle(s), last axle steered, drum brake system, air suspension with lifting and lowering mechanism, vehicle can be covered with advertising and/or lettering. SI86996 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please contact us! Gsdpozw Sgbofx Anqokb

Condition: used, maximum load weight: 33,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 01/2027, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, Extendable semi-trailer, overall length adjustable from 7700 mm to 21300 mm, 9 stake pockets per side, 9 lashing points per side, all-round warning light / rear and center, extendable warning signs, JOST support jacks, central lubrication system, continuous underfloor box, ABS, EBS, SAF axle(s), last axle steered, drum brake system, air suspension with lifting and lowering mechanism, vehicle can be covered with advertising and/or lettering. SI86996 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. Gjdpfx Anjzw Sguoqjkb We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 04/2018, loading space length: 295,000 mm, loading space width: 2,540 mm, loading space height: 1,380 mm, total length: 295,000 mm, total width: 2,540 mm, total height: 1,380 mm, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = Godpfozc Nxmox Anqskb - Air suspension - Central lubrication system = Further Information = Axle Configuration Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg Rear axle 3: Max. axle load: 10,000 kg Weights Unladen weight: 13,240 kg Payload: 34,760 kg GVWR: 48,000 kg Functional Loading platform height: 138 cm Maintenance APK (Technical Inspection): valid until 10/2026 Condition Technical condition: good Optical condition: good Damage: none Financial Information Price: Upon request

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. Gjdpfjzu Ebtex Anqskb On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: good (used), axle configuration: 2 axles, first registration: 03/2004, total length: 15,600 mm, total width: 2,550 mm, color: green, Year of construction: 2004, Equipment: ABS, - Air suspension - Central lubrication system Rear axle 1: Steered Rear axle 2: Steered Unladen weight: 13,400 kg Payload: 22,600 kg GVWR: 36,000 kg Superstructure brand: FAYMONVILLE STBZ-2VA Loading platform height: 45 cm Technical condition: good Optical condition: good FAYMONVILLE STBZ-2VA – 2-AXLE LOW LOADER – TELESCOPIC – DETACHABLE GOOSENECK – HYDRAULICALLY STEERED Gjdpjzy I Tvofx Anqjkb Well-maintained and robustly built Faymonville STBZ-2VA 2-axle low loader, equipped with a detachable gooseneck, telescopic platform, hydraulically steered axles, air suspension, and a central lubrication system. A professional low loader for the transport of construction machinery, excavators, wheel loaders, cranes, as well as long and heavy machinery. GENERAL DATA * Manufacturer: Faymonville * Type: STBZ-2VA * Design: 2-axle low loader * First registration: 19.03.2004 * Number of axles: 2 * Axle manufacturer: BPW * Both axles hydraulically steered * Air-suspended * Central lubrication system * Detachable gooseneck * Excavator boom recess at the rear * Tires: 235/75 R17.5 LOW PLATFORM / LOADING AREA The Faymonville features a particularly low and widely telescopic platform. * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: approx. 1,390 cm * Width: approx. 255 cm * Loading height: only approx. 45 cm * Thickness of the loading platform: approx. 24 cm Due to the very low loading height of only approx. 45 cm, this low loader is ideally suited for the transport of tall machinery where the lowest possible overall height is crucial. The platform is telescopically extendable by an impressive 5.50 meters. This also makes the semi-trailer excellent for particularly long machines, structures and special transports. DETACHABLE GOOSENECK Equipped with a detachable gooseneck. This allows self-propelled machines to be conveniently driven directly onto the low platform from the front. Ideally suited for the transport of: * Excavators * Crawler excavators * Bulldozers * Wheel loaders * Crawler cranes * Road construction machinery * Agricultural machinery * Heavy and special construction machinery AXLES & CHASSIS Equipped with 2 BPW axles, both of which are hydraulically steered. The hydraulic steering ensures excellent maneuverability and is a major advantage, especially in tight construction sites, industrial plants and special transports. In addition, the low loader has air suspension, which ensures good driving characteristics and optimal load distribution. WEIGHTS * Technical total weight: approx. 36,000 kg * Unladen weight: approx. 15,600 kg * Specified payload: approx. 22,600 kg Note: The specified weights should be checked against the vehicle documents, as the unladen weight and specified payload together amount to 38,200 kg. DIMENSIONS * Overall length of low loader: approx. 1,560 cm * Width: approx. 255 cm * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: ...

Condition: good (used), Year of construction: 2004, Extras Single extension Toolbox made of stainless steel Lashing points Spare wheel with bracket Mechanical landing gear Rear bumper with lighting Toolbox mounted on the gooseneck Warning signs for overwidth Twist-lock for containers Kingpin 2.0 inches = Further information = Gkedpjzym T Uefx Anqjb Year of manufacture: 2004 Unladen weight: 10,800 kg Payload: 47,200 kg GVW: 58,000 kg Technical condition: good Visual condition: good Price: On request

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,500 mm, loading space width: 2,540 mm, total length: 13,750 mm, total width: 2,540 mm, total height: 2,730 mm, Equipment: ABS, Vehicle identification number: YAFSR3005J0021355 TELESCOPIC, extends to 8,200 mm Gkedpfeznqg Isx Anqjb CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", accommodating 45" containers DE/HU (German technical inspection) due SAF axles with drum brakes 3 forced-steering axles, hydro-mechanically mounted on a turntable with cable control and wireless remote control Automatic steering Platform dimensions: 13,720 mm - loading height: 1,100 mm Saddle height 950 - 1,050 mm Rear turning radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic unit Extension lighting Toolbox Central lubrication system Tires: 235/75 R 17.5 Spare wheel holder WITH spare wheel Changes, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract shall prevail. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° Gjdpfxoyhkqus Anqokb - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: used, overall weight: 44,000 kg, axle configuration: 2 axles, first registration: 04/2018, Unladen weight: 11,800 kg W = 12,000 mm Extendable forward for front loading of the attached flatbed trailer - Gooseneck in a compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" kingpin - Integrated hydromechanical steering - Hydraulic lifting and lowering function, including support cylinders - Designed for a technical fifth-wheel load of up to 24 tons - Aluminum side walls, 4-sided - Turning radius: 2,200 mm Flatbed trailer - Low-bed with external tubes - Flatbed length: 6,750 mm, telescoping to 12,250 mm (extension of 5,500 mm) - Flatbed width: 2,550 mm - Height: 200 mm - Loaded height: approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Coupling jaws at the front for connection to the gooseneck 2-axle chassis - Chassis in a compact design - Air-suspended chassis (L x W): approx. 2,750 x 2,550 mm including lifting and lowering valve, with 2 forced-steered axles, manufacturer BPW, track width 1,330 mm Gksdpfxoy U Df Hs Anqeb - Chassis with kingpin recess Braking system - Two-line, all-wheel air brake system - Progressive central lubrication system - Remote control - Loaded fifth-wheel height: 1,250 mm - All 2 axles hydraulically forced-steered

Condition: used, maximum load weight: 32,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2022, Year of construction: 2022, Equipment: ABS, * Faymoville F-S43-1AAF * Lifting platform * Steering axle * Cable winch * Alcoa aluminum rims * Tires approximately 80% tread Gkjdpfx Ansznqqgsqsb * Year of manufacture: 2022 * In top condition * Working hours: Mon-Fri 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00. * E-mail: * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber (English): Mladen Ilic

Condition: new, overall weight: 78,000 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 850 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: • Gooseneck in SNT design for optimizing load platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10° • Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Load Platform: • Extendable load platform, approx. 8,800 mm long with rear chamfer of approx. 500 mm x 10° • Recess in the load platform and chamfer area for receiving excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • Pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulic foldable ramp ends • Ramps can be hydraulically moved individually by approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the chamfered section of the load platform • Ramps with hardwood covering • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW axle stub, 1st axle steering, all other axles forced steered via hydromechanical system • 1st axle with electro-magnetic reverse lock, activated automatically in reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories included: • Detachable steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection strip • 3 kW electro-hydraulic power pack for operation of hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • On the gooseneck: 1 pair removable ALU side boards, approx. 400 mm high, anodized • On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering over the king pin • 3.5" king pin • Gooseneck guide plate for fifth wheel, approx. 500 mm wide • Load platform locking with conically welded locking profiles every 250 mm • Includes pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the load platform • Extendable (galvanized) outriggers, approx. 230 mm each side • 1 pair of built-in open wheel recesses to the extension, approx. 700 x 410 mm, in the load platform in front of the 1st axle • Wheel recesses with steel plating and 15 x 15 mm square climbing bars, approx. every 200 mm • 1 pair of built-in wheel recesses, approx. 1,480 x 700 x 410 mm, in the load platform between the 1st and 2nd axles • Wheel recesses with 15 x 15 mm square climbing bars and extensions in the lower area • ALU covers for the wheel recesses between the 1st and 2nd axles, usable as widening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the chamfered load platform Gsdpfx Ajrvw U Ssnqokb • Central lubrication system with 1 pump, brand BEKAMAX, for standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single-track control • WABCO Smart Board System • Smart Board equipped with odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 marker lights and holders for beacon

Condition: new, empty load weight: 14,350 kg, maximum load weight: 53,450 kg, overall weight: 67,800 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel, approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Godpfx Aoya E A Nenqekb Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform and into the bevel to accommodate the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps individually hydraulically movable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" 25 mm rubber floor and steel plate floor approx. 5 mm as additional reinforcement on the platform bevel - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - BPW axles and suspension, 1st axle steerable, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire pressure sensors installed in all wheels including spare wheels Surface Treatment: - Complete steel construction blasted automatically with a shot blast machine after welding - Second shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure best corrosion protection - Final painting with 2 coats of 2K topcoat, single color in MB 7350 Novagrau Accessories Included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches - 1 spare wheel - Outer beam on gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of lying lashing rings at the rear of the gooseneck - 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized - 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor over the gooseneck, tread plate covering over the king pin - 2" king pin - Round NATO socket on the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm in front of the axles, continuously open up to the gooseneck crossmember, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between the first and second axles, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel Gksdpfsw Tgp Dox Anqsb * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, empty load weight: 9,450 kg, maximum load weight: 35,550 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 1,560 mm, total width: 2,550 mm, tire size: 385/65 R 22,5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck designed as a loading deck, fitted with aluminum chequer plate - Front tapered approx. 45° - Hydraulic lifting arm, lift/lower range approx. -280/+250 mm - Two kingpin positions at 2,300 mm and 2,000 mm from DSR - Suitable for tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, length approx. 9,500 mm, with bottom-mounted angle profiles for pallet mounting (distance from kingpin to center of axle assembly approx. 8,000 mm) Axles, Suspension and Tyres: - BPW stub axles, with drum brakes and independent wheel suspension, hydraulic axle compensation with lift and lower function - Axle lowering lock in case of suspension airbag failure, designed for max. pallet height 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure sensors installed in all wheels including the spare - TPMS tyre pressure monitoring system compliant with ECE R 141 Gkodpsygvc Hefx Anqsb Surface Treatment: - Entire steel structure automatically shot-blasted after welding using a turbine blasting system - Second blasting with corundum to optimise coating adhesion - HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with two layers of 2K topcoat, single colour in Novagrau (DB 7350) - Paint system tested in salt spray test to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid, integrated in the rear section of the gooseneck, approx. 640 x 700 x 215 mm - Removable aluminium rear wall on the gooseneck, approx. 400 mm high, anodised - One pair of folding aluminium sideboards on the gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings; operation lighting for the gooseneck, suspension, and hydraulic load restraints with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Access ladder mounted front right with 2 detachable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings (LC 6,300 daN) mounted on the longitudinal beams - Grating platform, level with the guiding rails for load securing, fitted to the longitudinal beams - Hydraulic preparation, including control unit, for mounting 3 pairs of our hydraulic load restraints - First and last axle manually liftable on left and right - Storage box behind axle assembly, left and right, splash-proof - Tapered rear edge for easier pallet loading - Rear lashing eyes mounted on the tail crossmember for mechanical bracing - 7-pin socket on the tail crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side incl. axle load diagram - 3 pairs of hydraulic load restraints with swivel arms, moveably mounted to longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, can be secured horizontally at 90°, 105°, and 270° - Folding underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate holder including lighting, rear left on the trailer - Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, brand BEKAMAX, standard grease version

Condition: used, color: red, Year of construction: 2011, Faymonville STBZ-4VA. Year: 2011. 10-ton SAF axles. Weight: 22,500 kg. Load capacity: 57,500 kg. Max. weight: 80,000 kg. Kingpin load: 40,000 kg. EBS ABS ALB. Hydraulic system, powered from the trailer, operates on NATO electricity. Hydr. detachable gooseneck. 5 meters extendable. 2 x spare tire. Zinc-coated! Air suspension. Excavator bridge: 5600 x 950 mm. Remote control on cable. Dimensions: Neck: L: 4500 mm. W: 2550 mm. H: 1750 mm. Kingpin height: 1250 mm. Floor: L: 7550 mm. W: 2750 mm. H: 530 mm. Floor thickness: 350 mm. Rear trailer: L: 5600 mm. W: 2750 mm. H: 1000 mm. Tires: 235/75R17.5 70%. Dolly D-2. Year: 2012. 10-ton SAF axles. Weight: 4300 kg. Max. weight: 38,000 kg. Kingpin load: 18,000 kg. Air suspension. Tires: 235/75R17.5 70%. German trailer! ID No.: 624. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2011 Gksdpfx Aszya Ewjnqjb Unladen weight: 22,500 kg Payload: 57,500 kg GVW: 80,000 kg Extendable structure: Yes = Company Information = For more information: