Used Goldhofer Special Purpose Trailers for sale (112)

Condition: used, axle configuration: 3 axles, first registration: 01/2009, suspension: air, color: other, tire size: 245/70 R17.5, Year of construction: 2009, Equipment: ABS, Chassis Laedpfxou H Hu Ts Abloh Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Special Transport Length above axes: 410 cm Length of loading floor: 800 cm (removable floor 760 cm) Length of swan neck: 375 cm Lowbed trailer: ✓ Max width: 250 cm Max. length: 1360 cm (extends 560 cm) Extendable: ✓ Tank Fuel: ✓ NON EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 3-axle lowbed trailer with removable gooseneck and extendable floor // DIMENSIONS // Min. floor length 800 cm, Max. floor length 1360 (extends 560 cm), Floor height 47 cm, Gooseneck length 375 cm, Gooseneck floor height 167 cm, Kingpin height 122 cm, Kingpin diameter 2 inches, Axle spacing 131 cm, Axle plateau length 410 cm, Axle plateau height 103 cm, Total external shipping dimensions (not extended): 1650x250x... cm // WEIGHTS // Max. gross design weight 54000 kg, Max. legally admissible standard weight 41000 kg, Max. gross weight with exceptional transport permit: 56500 kg // Air suspension, Drum brakes, BPW Eco axles, Tyres 245/70R17.5, 3 steering axles, remote control, ABS, Shipping dimensions 1650x250x150cm = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: Bpweco Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 45% Axle 2: Double wheels; Steering; Tyre profile left outer: 40%; Tyre profile right outer: 60% Axle 3: Double wheels; Steering; Tyre profile left outer: 65%; Tyre profile right outer: 60% Measures Dimensions (LxBxH): 1650 x 255 x 150 cm Weights Empty weight: 19.000 kg Carrying capacity: 35.000 kg GVW: 54.000 kg Identification Registration number: C271731 Serial number: WG0STZV3580030272 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, Year of construction: 2021, Goldhofer SX1 (245). Year: 2021 - Unused! Ljdpfxjxqfk Hj Ableah 10 t BPW axle. Weight: 2,900 kg. Max. gross weight: 32,900 kg. Kingpin load: 22,900 kg. Hydraulic suspension. Tyres: 245/70R17.5 100% Continental HTR 2. Unused! 3 units available! German documentation! ID No.: 682. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any manner you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2021 Unladen weight: 2,900 kg Payload: 30,000 kg Gross vehicle weight: 32,900 kg = Company information = For more information: WhatsApp:

Condition: used, overall weight: 93,200 kg, maximum load weight: 75,700 kg, axle configuration: > 3 axles, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 885 mm, first registration: 06/2008, color: beige, tire size: 245/70 R17.5, Year of construction: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Angled at 10°, front corners at 45° (1,080 mm long, 190 mm high bevel at the gooseneck end) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Clearance radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - 1-piece aluminium sideboards, 400 mm high, closed on 3 sides incl. rear board, stanchions foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Simple telescopic extension, continuous over the running gear - External/internal tube construction with 1,090 mm fixed loading platform at the front - (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm - Steel plate flooring - Locking of extension stages by spring-applied cylinder and tapered pin - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steered axles - Axle brand SAF - Track width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel/wood Rear of vehicle: - Design: "Bevelled" (600 mm long, 10° bevel) - 1,000 mm rear overhang from center of last axle - Detachable ramp eye on rear crossmember - Mechanical support for stabilisation during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Ramps: - Two-piece access ramps with lengths of 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting device - SuperGrip rubber flooring - Climbing strips on outer side of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to a maximum outer width of 2,790 mm or minimum inner spacing of 480 mm - Integrated mechanical locking system in ramp lift cylinder for ramp safety during transport - Mount for warning beacon Hydraulics: - Hydraulic connection for tractor unit (1 set), connections for tractor, hydraulic pump in tractor unit with max. 60 l/min flow - Hydraulic emergency hand pump - Electro-hydraulic power pack Trailing steering: - Trailing steering bottle for manual steering of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at the front of the gooseneck, plug-in type, galvanized - Stanchion holder on the gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm Lsdpfexp U Tzox Abljah - Widening including extension boards, attachable extension at vehicle rear - 1 pair wheel chocks with holder - 1 spare wheel - Central lubrication system with 2 lubrication pumps - Single-color paint finish, RAL-1001 Beige

Condition: used, overall weight: 44,500 kg, empty load weight: 8,600 kg, maximum load weight: 35,900 kg, axle configuration: > 3 axles, first registration: 10/2006, suspension: air, color: green, tire size: 235/75 17,5, Year of construction: 2006, tire condition: 50 %, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69977 Goldhofer, STN-L3-37/80A * Year of manufacture: 2006 * ABS, Anti-lock Braking System * Air suspension * Retractable lashing rings * Self-tracking rear axle * Air connection coupling heads (red + yellow) * Spare wheel carrier with spare wheel * 2x 7-pin connector plugs * Lifting and lowering device * Telescopic – extendable trailer * Heavy-duty lashing rings * Rear support * Suspension: Air * Gross vehicle weight: 44,500 kg * Unladen weight: 8,600 kg * Payload: 35,900 kg * Perm. total weight: 44,500 kg * Tyre condition 1st axle: 50% – size: 235/75 R17.5 * Tyre condition 2nd axle: 50% – size: 235/75 R17.5 * Tyre condition 3rd axle: 50% – size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Platform length: 9,000 mm * Rust present * Sale only without TÜV (roadworthiness certificate) Disclaimer: Specifications are subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchasing/selling/renting commercial vehicles Lsdpjxpdbhjfx Ableah * Fast and straightforward financing * Handling of all (export) documentation * Ordering of export and customs licence plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transferring commercial vehicles Please contact our trained staff – we are happy to advise you.

Condition: used, overall weight: 38,000 kg, maximum load weight: 27,900 kg, axle configuration: 2 axles, loading space length: 13,350 mm, loading space width: 2,550 mm, first registration: 07/2006, Equipment: ABS, id: 732186 RAIDS, TIRES 80% For more information please call: , ????? ?? ????? ???? ????? ???: 420734511212 Laedpfswm T S Hsx Ableh

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 12/1997, Equipment: ABS, Goldhofer 3-axle special trailer / long material transporter Type: SPZ-DL 3-38/80 Permissible total weight: 48,000 kg Lsdpfxswmz Aaj Abljah Permissible front axle load: 18,000 kg Permissible rear axle load: 30,000 kg Air suspension + 3 x STEERING axles Total length: 20,500 mm ! German registration ! For further dimensions, please refer to the drawing, which can also be sent in high-resolution PDF format upon request. ! More information upon request via email ! Information provided without guarantee/errors excepted! Information provided on the internet is non-binding descriptions and does not constitute warranted characteristics. The seller is not liable for errors, input mistakes, and data transmission errors. Subject to changes. Constant buying and selling as well as trade-in and rental of crane and lifting vehicles as well as construction machines and heavy-duty vehicles.

Condition: used, overall weight: 30,000 kg, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, axle configuration: 3 axles, loading space length: 8,610 mm, first registration: 05/2019, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Laedpsxghwhsfx Ablsh

Condition: used, color: yellow, Year of construction: 2017, Goldhofer STZ-L5 (245) A. Year: 2017. 10-12 tons BPW axles. Weight: 17,900 kg. Load capacity: 52,100 kg. Max weight: 70,000 kg. Kingpin load: 20,000 kg. 8.10 meter extandable. Hydraulic from trailer works on hydraulic from a truck. Airsuspension. Allu boards and toolbox on neck. Powersteering 5 steering axles. Radio remote control. Dimmensions: Neck: L: 3700 mm. W: 2480 mm. H: 1500 mm. Kingpin height: 1300 mm. Floor: L: 11,780 mm. W: 2750 mm. H: 900 mm. Tyres: 245/70R17.5 60-90%. German Trailer! Top condition! ID NR: 583. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2017 Unladen weight: 17,900 kg Payload: 52,100 kg GVW: 70,000 kg Laodpfx Abexp Iiijleh Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(es), trailer for mobile crane - counterweights/counterweights Lsdpfx Aelbl Taoblsah Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, axle configuration: > 3 axles, loading space length: 6,650 mm, loading space width: 2,760 mm, first registration: 03/2014, suspension: hydraulics, color: orange, tire size: 245/70R17.5, Year of construction: 2014, = Additional options and accessories = - Hydraulic - Floor Material - Material: steel - Security rings = More information = General information Cab: 9999 Axle configuration Tyre size: 245/70R17.5 Make axles: BPW Brakes: drum brakes Suspension: hydraulic suspension Axle 1: Steering; Tyre profile left: 60%; Tyre profile right: 60% Axle 2: Steering; Tyre profile left: 60%; Tyre profile right: 60% Axle 3: Steering; Tyre profile left: 60%; Tyre profile right: 60% Axle 4: Steering; Tyre profile left: 60%; Tyre profile right: 60% Axle 5: Steering; Tyre profile left: 60%; Tyre profile right: 60% Axle 6: Steering; Tyre profile left: 60%; Tyre profile right: 60% Lodpswnrp Tsfx Ableah Measures and weights GVW: 94.750 kg Dimensions (LxW): 1620 x 278 cm = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, overall weight: 38,000 kg, maximum load weight: 27,900 kg, axle configuration: 2 axles, loading space length: 13,350 mm, loading space width: 2,550 mm, first registration: 07/2006, Equipment: ABS, id: 732186a RAIDS, PNEU 80% For more information please call: , ????? ?? ????? ???? ????? ???: 420734511212 Ledpfx Abewm T T Reloah

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Ledpfx Aexcdf Hsbljah

Condition: new, overall weight: 30,000 kg, maximum load weight: 22,700 kg, axle configuration: 3 axles, B 10,800 mm Unladen weight 7,500 kg Loading length over turntable 2,250 mm Loading length 6,400 mm Loading height 855 mm +140/-60 mm Rubber covering Width 2,550 mm, extendable to 3,000 mm Excavator recess in rear chassis BPW axles with air suspension and axle load gauge 2-part hydraulic ramps, 2,750+1,550 mm long, 800 mm wide Ramps hydraulically adjustable Hydraulic rear support Drawbar with rotating towing eye 40/50 mm Smartboard Storage boxes left and right Lodoxnvinopfx Abljah

Condition: used, color: blue, Year of construction: 2005, Goldhofer S-THP 15. Goosneck 1: S-THP/ET. 5th wheel load: 30.000 kg. Works on hydraulic from the truck + hatz engine. Gooseneck 2: S-THP. 5th wheel load: 35.000 kg. Works on hydraulic from the truck + hatz engine. 3 axles: THP/ET3. Year: 1993. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Ledpfx Abjxnnq Dslsah Year: 1996. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Year: 2005. 12 tons BPW axles. Weight: 8000 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 2 axles: THP/ET2. Year: 2005. 12 tons BPW axles. Weight: 5400 kg. Max weight: 24,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 70%. Dimmensions floor: L: 2800 mm. W: 2750 mm. H: 1100 mm. 4 axles: THP/ET4. Year: 2005. 12 tons BPW axles. Weight: 10,900 kg. Max weight: 48,000 kg. Hydraulic suspension. Tyres: 285/70R19.5 60%. Dimmensions floor: L: 5550 mm. W: 2750 mm. H: 1100 mm. Extra floor: 4 point outriggers: Dimmension floor: L: 3000 mm. W: 2750 mm. H: 1100 mm. Total lenght floor: 23.8 meter! German Trailer! ID NR: 443. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2005 = Company information = For more information: WhatsApp:

Condition: used, overall weight: 64,000 kg, maximum load weight: 42,400 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand Laedpfsvlf Ixox Ableh German vehicle!! German papers!!

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Ljdpfx Aoxcdg Deblsah

Condition: new, overall weight: 76,000 kg, maximum load weight: 61,800 kg, axle configuration: > 3 axles, Dimensions B 11,970 mm Lodpfx Aewcy Rzeblsah Curb weight 11,200 kg With air suspension, hydromechanical forced steering, easily telescopic loading bed, with access ramps STZ-L gooseneck - Robust welded steel construction - Designed loading bed 3,700 x 2,480 mm - Beveled edge - Hydromechanical forced steering (dual-circuit steering) in a flat design (Overall height 235 mm) with adjustable guide elements - Ball-bearing fifth wheel with replaceable 2" kingpin and adjustable steering wedge - Mechanical seat supports Loading bed - Easily telescopic, designed as an outer/inner tube construction with a 700 mm long, fixed loading bed section at the front - Locking of the extension steps via spring-loaded cylinders Chassis - Air-sprung 5-axle chassis, - Axle assembly BPW (Eco), consisting of one leading-steer axle and three+ hydromechanically forced-steer steering pivot axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Lifting and lowering valve as standard for lowering to a minimum of 790 mm or raising to a maximum of 1000 mm - 1 axle can be lifted Rear of the vehicle - Straight design with climbing rails - Short 1,260 mm overhang from the center of the last axle - Hydraulic rear support Load-up ramps - 2-part loading ramps with a length of 2,750 mm / 1,550 mm, a width of 800 mm - Maximum load capacity per pair of ramps: 50,000 kg - Hydraulic ramp adjustment - Overall length of the ramps in transport position from the rear edge of the vehicle rear: 300 mm Braking system - Dual-line all-wheel drive air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic brake adjuster (AGS) - Parking brake with spring-loaded cylinders - Anti-lock brake Special equipment - Extendable extensions - Central lubrication system "BekaMax" - All lashing eyes installed that can be ordered - Electro-hydraulic power unit with radio remote control - Lifting option (load-dependent) for the first axle Technical specifications Gooseneck Loading area (LxW): 3,700 x 2,480 mm Overall height over fifth wheel coupling: 235 mm Fifth wheel height when loaded: 1,250 mm Loading area Loading area (LxW) 9,300 x 2,550 mm Telescopic by 4,465 mm Loading height when loaded: 855 mm (+140-60) mm) 2nd driving position: 895 mm (+/-100 mm) Steering 1st axle with leading steering and liftable 3rd and 5th axles with hydromechanical forced steering (dual-circuit steering)

Condition: used, color: blue, Year of construction: 2005, Goldhofer S-THP 15. Goosneck 1: S-THP/ET. 5th wheel load: 30.000 kg. Works on hydraulic from the truck + hatz engine. Gooseneck 2: S-THP. 5th wheel load: 35.000 kg. Works on hydraulic from the truck + hatz engine. 3 axles: THP/ET3. Year: 1993. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Year: 1996. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: Laodoxnnqwepfx Ablsh L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Year: 2005. 12 tons BPW axles. Weight: 8000 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 2 axles: THP/ET2. Year: 2005. 12 tons BPW axles. Weight: 5400 kg. Max weight: 24,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 70%. Dimmensions floor: L: 2800 mm. W: 2750 mm. H: 1100 mm. 4 axles: THP/ET4. Year: 2005. 12 tons BPW axles. Weight: 10,900 kg. Max weight: 48,000 kg. Hydraulic suspension. Tyres: 285/70R19.5 60%. Dimmensions floor: L: 5550 mm. W: 2750 mm. H: 1100 mm. Extra floor: 4 point outriggers: Dimmension floor: L: 3000 mm. W: 2750 mm. H: 1100 mm. Total lenght floor: 23.8 meter! German Trailer! ID NR: 443. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2005 = Company information = For more information: WhatsApp:

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Lsdpfx Aexcdf Tsblsah Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: new, overall weight: 110,000 kg, maximum load weight: 86,300 kg, axle configuration: > 3 axles, With hydraulic suspension, BPW 12 t axles, hydromechanical forced steering, easily telescopic platform-type loading area, with 2-part loading ramps Own weight 23,700 kg Payload 86,300 kg W = 15,620 - 24,920 mm STZ-L gooseneck - 45° beveled front corners (468 x 468 mm), closed outer frame - Robust steel and welded construction - Designed loading area 3,700 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in a flat design (overall height 235 mm) with adjustable guide elements - Ball-bearing fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load 26,000 kg - Steering radius 2,800 mm -Comfort storage box Loading area - "Platform, easily telescopic" design -Traffidecko polymer rubber flooring - Easily telescopic loading area, designed as an outer-inner tube construction - Locking of the extension steps via spring-loaded cylinders and connecting bolts - Fixed support at the front, 700 mm long - Intermediate table, 300 mm Chassis - Hydraulically sprung 7-axle chassis, wheelbase 1,510 mm - BPW axle assembly, consisting of one unsteered axle and six hydromechanically forced-steer steering knuckle axles with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Chassis height 890 mm +170 mm/-90 mm - Chassis with open outer frame Rear of the vehicle - "Beveled" design, 500 mm - 2 integrated downpipe supports to support the rear of the vehicle during loading 2-part loading ramps with Super Grip surface, 50,000 kg - 2,600 + 1,200 x 720 mm - Vertical hydraulic hoist with hand pump, cable extension - Hydraulic ramp adjustment Braking system - Dual-circuit all-wheel drive air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjuster (AGS) - Parking brake with spring-loaded cylinders - Anti-lock brake - Hydraulic connection - EasyControl - Aluminum side walls, 3-sided - Lifting option for 2 axles - Central lubrication system "BEKA-MAX" - Electric generator - Extendable extensions including inlay boards, telescopic extension up to 3,390 mm Technical specifications Specifications Gooseneck Loading area (LxW) 3,700 x 2,480 mm Bevel: 1,080 mm Height over fifth wheel coupling 235 mm Laedpfxewcy Ads Abljh Fifth wheel height when loaded 1,300 mm Rearward steering radius 2,800 mm Forward steering radius 1,300 mm King pin 3.5" Loading area Loading area (LxW) 12,500 x 2,750 mm Telescopic by 9,300 mm Incrementally to (LxW) 21,800 mm x 2,750 mm. Extendable to 3,390 mm Incl. rear bevel 500 mm Loading height when loaded approx. 890 mm Chassis Wheelbase 6 x 1,510 mm Overhang 1,100 mm Steering 1st axle unsteered 2nd - 7th axles hydromechanically forced steered (dual-circuit steering)

Condition: used, color: blue, Year of construction: 2005, Goldhofer S-THP 15. Goosneck 1: S-THP/ET. 5th wheel load: 30.000 kg. Works on hydraulic from the truck + hatz engine. Gooseneck 2: S-THP. 5th wheel load: 35.000 kg. Works on hydraulic from the truck + hatz engine. 3 axles: THP/ET3. Year: 1993. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Year: 1996. 12 tons BPW axles. Weight: 7900 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 3 axles: THP/ET3. Year: 2005. 12 tons BPW axles. Weight: 8000 kg. Max weight: 36,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 60%. Dimmensions floor: L: 4150 mm. W: 2750 mm. H: 1100 mm. 2 axles: THP/ET2. Year: 2005. 12 tons BPW axles. Weight: 5400 kg. Max weight: 24,000 kg. Hydraulic suspension. Tyres: 285/70R19,5 70%. Dimmensions floor: L: 2800 mm. W: 2750 mm. H: 1100 mm. 4 axles: THP/ET4. Year: 2005. 12 tons BPW axles. Weight: 10,900 kg. Max weight: 48,000 kg. Hydraulic suspension. Tyres: 285/70R19.5 60%. Dimmensions floor: L: 5550 mm. W: 2750 mm. H: 1100 mm. Extra floor: 4 point outriggers: Dimmension floor: L: 3000 mm. W: 2750 mm. H: 1100 mm. Total lenght floor: 23.8 meter! German Trailer! ID NR: 443. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. Lodpfxjxnnqdj Ablsah = Further information = Year of construction: 2005 = Company information = For more information: WhatsApp:

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Lsdpfjxcdgqex Ableah Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, color: yellow, Year of construction: 2008, Goldhofer STZ-L3-27/80A. Year: 2008. 7.4 ton BPW axles. Unladen weight: 13,800 kg. Payload: 26,400 kg. Gross vehicle weight: 40,200 kg. Kingpin load: 18,000 kg. Extendable by 7.2 meters. 2 x 25 cm widening. Power steering on 3 steering axles. Aluminum side boards and toolbox on gooseneck. Trailer hydraulics operated via truck hydraulics. Air suspension. Spare tyre included. Dimensions: Gooseneck: L: 3,500 mm W: 2,550 mm H: 1,550 mm Kingpin height: 1,300 mm Deck: L: 9,500 mm W: 2,550 mm Ledpfx Ajxlplqjblsah H: 800 mm Tyres: 205/65R17.5, 80% tread remaining. Radio Remote Control! ID No: 684. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, as well as all agreements entered into by Heinhuis and any negotiations that precede them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of manufacture: 2008 Unladen weight: 13,800 kg Payload: 26,400 kg Gross vehicle weight: 40,200 kg Extendable superstructure: Yes = Company Information = For further information: WhatsApp:

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Laedpfx Abexcdfgjleh Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Laodsxcdfajpfx Ableh