Used Goldhofer Special Purpose Trailers for sale (96)

Condition: used, maximum load weight: 76,000 kg, overall weight: 107,000 kg, axle configuration: > 3 axles, first registration: 04/2013, next inspection (TÜV): 04/2027, Hydraulically raiseable and lowerable XLE gooseneck - detachable and simplified design - ball bearing swivel plate, 3.5" kingpin and adjustable steering wedge - integrated hydromechanical dual steering for articulating axle steering (2-circuit steering) - hydraulic locking - hydraulic raising and lowering function - hydraulic differential lock - steering radius of 2,800 mm for a 4-axle semi-trailer - designed loading platform (approx. 3,600 x 2,480mm) with non-slip steel plate surface and beveled front corners - designed for a technical saddle load of up to - gooseneck designed for direct attachment of the excavator bridge claws as well as for direct coupling of the 2-axle chassis Goldhofer 2-axle chassis with THP/ET special wheelsets two single-tire articulating axle units with hydraulic axle equalization with a total of 4 wheels per axle line - chassis width 2,750 mm, wheelbase 1,400 mm - technical axle load per axle line max. 14 tons (65 km/h) - max. steering angle of the articulating axles approx. 70 degrees - loading height in center position 1,250 mm, loaded - hydraulic axle travel +/- 300 mm - 2-circuit hydromechanical steering system - 2-line all-wheel air brake with spring-loaded parking brake, ALB brake and automatic slack adjuster (AGS) - ABS brake - hydropneumatic gas spring accumulator, switchable off during loaded travel - 2 special coupling lugs in special design on the front of the chassis, only for coupling the front simplified hydraulic gooseneck - adapter element integrated in the frame at the rear in a short and narrow compact design for connection between the chassis and the excavator low-bed bridge - hydraulic locking at the joint between adapter and excavator bridge - double-acting axle equalization cylinders Goldhofer - 80 ton - excavator bridge, telescopic with widening elements, can be converted to a low-bed bridge Main features - designed for a payload of 80,000 kg - welded construction made of fine-grained steel StE 690, designed as a box-shaped tube - height of the outer tube 400 mm - basic dimensions (LxW) approx. 6,250 x 1,350 mm, telescopic in length by approx. 6,750 mm to a total length of approx. 13,000 mm - inner tube (approx. 600mm wide) projecting into the chassis frame under the excavator trough - side flanks of the outer tube prepared for attaching folding widening elements - fixed transverse beam 1,350 mm wide at the attachment point at the front - full payload even when the excavator bridge is fully extended Goldhofer 4-axle chassis, Type THP/ET trough in optimized special design - two single-tire articulating axle units with hydraulic axle equalization with a total of 4 wheels per axle line - chassis width 2,750 mm, optimized wheelbases 2 x 1,310 + 1x 1,400 mm - technical axle load per axle line max. 14 tons. (65 km/h) - max. steering angle of the articulating axles approx 60 degrees - loading height loaded 1,140 mm (+/-200 mm) - total hydraulic axle travel 400 mm - 2-circuit hydromechanical steering system - 2-line all-wheel air brake with spring-loaded parking brake, ALB brake and automatic slack adjuster (AGS) - ABS - hydropneumatic gas spring accumulator, switchable off during loaded travel Gbodpozuu Rdjfx Afdeu - continuous 490mm deep excavator trough in the chassis frame, width approx. 700mm, incl. retractable plates, design aluminum, at the front and rear of the excavator trough - box-shaped frame outer tube under the excavator trough for accommodating the telescopic inner tube of the excavator bridge

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h Gjdpfx Afez N Nq Hjdebu - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, maximum load weight: 38,000 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 03/2009, with air suspension, hydromechanical forced steering, single telescoping loading platform, STZ-L gooseneck - robust steel welded construction - designed loading area 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in a flat design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge Loading platform - single telescoping, designed as an outer-inner tube construction with a 1,000 mm long fixed front deck section - locking of the extension stages via spring-loaded cylinders and conical bolts Chassis - air-suspended 3-axle chassis, - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a lowering to at least 825 mm or a raising to a maximum of 1025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of the vehicle - straight design - short 1,000 mm overhang from the center of the last axle - mechanical rear support Brake system - 2-line all-wheel air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) Gedpfx Afeyrzv Nodebu - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake Special equipment - "BekaMax" central lubrication system - Electric aggregate - Radio remote control Technical data Gooseneck Loading area (LxW): 3,500 x 2,480 mm Build height over fifth wheel: 235 mm Fifth wheel height loaded: 1,300 mm Loading platform Loading area (LxW): 10,000 x 2,550 mm Telescopable by 7,500 mm in stages up to (LxW): 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd transport position: 885 mm (+140/-60 mm) Steering 1st – 3rd axle hydromechanically forced-steered (dual-circuit steering)

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/1991, loading space length: 8,200 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * BPW axles Gbedpfowdb Ttjx Afdju ----Construction: Low-loader trailer (2200+6000mm), loading height approx. 900mm, sloped rearward, drive-on height approx. 750mm, steel/wooden floor, extendable to 3m, spring-loaded loading ramps, lashing rings. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice).

Condition: used, maximum load weight: 38,200 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 04/2007, next inspection (TÜV): 05/2027, with air suspension, forced steering, with rear inclination, and loading ramps STZ-L gooseneck - designed loading platform 3,500 x 2,480 mm - inclination: Witgenschräge - ball bearing-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - mechanical fifth wheel supports - turning radius 2,300 mm Loading platform - 1 pair of wheel recesses, rotatable after the gooseneck, depth 380 mm, length at the top 2,560 mm - 1 pair of wheel recesses after the 1st axle, depth 250 mm, length at the top 1,500 mm Chassis - air-suspended 3-axle chassis - Gigant axle assembly, consisting of one non-steered axle and two forced-steered steering knuckle axles - lifting and lowering valve Vehicle rear - design with inclination: 500 mm - hydraulic rear support Loading ramps - 1-piece hydraulic ramps with length 2,900 mm, width 720 mm Braking system - 2-circuit all-wheel pneumatic braking system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABS braking system Technical data Gooseneck Gsdpfx Afozvaaaedobu Loading platform (L x W): 3,500 x 2,480 mm Fifth wheel height, loaded: 1,215 mm Loading platform Loading platform (L x W): 9,100 x 2,500 mm Loading height, loaded: 885 mm (+140/-60 mm) Steering 1st axle: non-steered 2nd axle - 3rd axle: forced-steered Electrical system

Condition: used, maximum load weight: 30,400 kg, overall weight: 41,200 kg, axle configuration: 2 axles, first registration: 10/2009, next inspection (TÜV): 01/2027, Vehicle description according to the supplier: Dimension B: 12,000 mm Unladen weight: 13,000 kg with air suspension, hydromechanical forced steering, and a simply extendable loading platform. Gjdpfx Asz D R A Eofdsbu STZ-L gooseneck: - Robust steel welded construction - Loading platform measuring 3,500 mm x 2,480 mm - Rear deflection radius: 1,900 mm - Fifth wheel load: 10,800 kg - Hydromechanical forced steering (2-circuit steering) in a low-profile design (overall height 235 mm) with adjustable guide elements - Ball bearing slewing ring fifth wheel with replaceable 2" kingpin and adjustable steering wedge - Mechanical fifth wheel supports Loading platform: - Simply extendable, designed as an outer and inner tube construction with a fixed 700 mm long loading platform section at the front - Locking of the extension stages by means of spring accumulator cylinders - 300 mm long sliding table Chassis: - Air-suspended 4-axle chassis - BPW (Eco) axle unit, consisting of a fixed axle and three hydraulically and mechanically forced steering axle stubs - Axles with adjustable tapered roller bearings and automatic slack adjusters (ASA) - Raising and lowering valve standard - 1 axle can be lifted Vehicle rear: - Straight design - 2,100 mm overhang from the center of the last axle - Rear support with downpipe Braking system: - 2-line all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (ASA) - Parking brake by means of spring accumulator cylinders - ABS brake Special equipment: - Foldable widening elements - Central lubrication system "BekaMax" - Lifting option (load-dependent) of the 1st axle - Radio remote control Technical data: Gooseneck: Loading platform (L x W): 3,500 x 2,480 mm Overall height above fifth wheel coupling: 235 mm Fifth wheel height loaded: 980 mm Loading platform: Loading platform (L x W): 9,600 mm x 2,550 mm Extendable by 6,000 to 15,600 mm Loading height loaded: 755 mm (+140-60 mm) 2nd driving position: 805 mm (+/-100 mm) Steering: 1st axle can be lifted 2nd axle - 4th axle hydraulically and mechanically forced steering (2-circuit steering)

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function Gbsdpfx Afowxm Ilodsu * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Gsdpfx Asz N Nrkjfdobu Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Gjdpfx Afsz N Nqajdobu Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Godpfx Afei Rqi Ssdebu

Condition: used, maximum load weight: 15,400 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 06/1998, B=9100 Low-loader trailer 900 mm loading height Air suspension Gedpfxoz Ivqcj Afdebu BPW axle with drum brake 235/75 R 17.5 tire size 7000 mm x 2540 mm 40mm drawbar eye, 1500 mm drawbar, bent ABS Storage box on the right Container locks at the front Reinforcement pockets on the sides

Condition: used, overall weight: 79,200 kg, axle configuration: > 3 axles, first registration: 05/2009, Goldhofer STZ VL4 46/80A, 4 steering axles, detachable, extendable Everything at a glance · First registration: 06.05.2009 · Color: Red · Tare weight: 19,650 kg · Gross vehicle weight: 79,200 kg Gedpfxsz Dmrps Afdobu · Tires: 245/70 R17.5 · Note: Immediately available Special equipment · Goldhofer STZ VL4 46/80A · 4-axle low loader with twin tires · 4 steering axles with remote control · Detachable gooseneck with aluminum side boards · Operation and pressure gauge on the left side of the gooseneck · Extendable (drawing available) · Can be equipped with widening plates · BPW axles · NATO socket · Heavy-duty securing points Standard equipment · 4-axle · Lifting and lowering valve · 2 wedges · Underrun protection Errors, typing errors and prior sale are reserved. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26266 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. We probably speak yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, empty load weight: 11,800 kg, maximum load weight: 36,700 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 07/2026, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Year of construction: 2026, Equipment: ABS, Gooseneck, rigid, in a center tube design: -Front corners 90° -Closed outer frame with cutouts for lashing straps -Hole strip for aluminum loading ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° incline at the end of the gooseneck -3 pairs of lashing rings recessed in the loading area of the gooseneck, 2 pairs of beam pockets 100 x 50 mm in the loading area of the gooseneck Loading platform: -Closed outer frame with cutouts for lashing straps -Fixed front section 360 mm -Floor covering: sheet metal with anti-slip coating -Excavator well incl. elongated holes for load securing -1 pair of permanently installed wheel wells in front of the first axle, 390 mm deep incl. climbing strips in the incline -1 pair of permanently installed wheel wells between the first and second axles, 390 mm deep, incl. climbing strips in the incline -Technically maximum extension of 3,740 mm -Aluminum wheel well cover "Premium", full width 600 mm, can be extended to 3,000 mm with 8 t axle load -Different wheel well depths by using the wheel well cover (depth approx.: 390 mm and 260 mm) -Inclinined vehicle rear 8°, 550 mm length -Sled design for easy attachment and removal of ramps -Mechanical, spring-supported comfort outrigger supports at the rear of the vehicle for support during loading -Continuous mud flap at the rear -1 pair of lashing points LC 10,000 daN in the middle at the start of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform 3-axle chassis: -Axle manufacturer BPW ECO Max, air-suspended -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors mounted on the rim -2 axles with hydraulic forced steering and 1 rigid axle -Braking system manufactured by Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing steering system via a wireless remote control or button on the gooseneck, incl. single-axle function -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle possible via TIM) Ramps, 2-piece: -L x W 4,300 x 800 mm -Load capacity 38 t; floor covering: larch -Integrated mechanical locking mechanism in the ramp lifting cylinder to secure the ramps in the transport position -Ramp operation: lifting and shifting hydraulically Gbsdpfxezdzune Afdou -The wireless remote control for controlling the trailing steering system can also be used to control the rear functions -Electro-hydraulic unit for ramp operation Included accessories: -Headboard incl. parking position for rear panel, approx. 400 mm high -Spare wheel holder standing at the front of the gooseneck, incl. spare wheel -Chocks incl. holder -Beams for widening to 3,000 mm -Aluminum plug-in side boards 400 mm high, consisting of 2 side boards, each approx. 3,150 mm long, and rear side board with beams (galvanized) -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for flashing beacon -One plug-in partition plate at the end of the excavator well -Traffideckgo rubber covering, 8 mm construction height in the outer area of the loading platform including rear incline, without fixed loading platform section in the

Condition: used, overall weight: 11,500 kg, first registration: 12/1994, Structure: Gbjdpfx Afjzix Rqjdju Very good condition, fully extendable to a total length of 18.5 m.

Condition: used, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Wagon Transport                                 Approval          Technical 1 Speed:      80 km/h                65 km/h Fifth wheel load:                23,000 kg              26,000 kg Rear axle load:        10,000 kg              11,000 kg Total weight:      83,000 kg              92,000 kg Payload:                  52,500 kg              61,500 kg Tare weight: (without accessories):          30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: angled 10 degrees Front corners: angled 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical drop-side supports and hydraulic lowering cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Liftable: no Length: 13,000 mm Width: 3,000 mm Decking: Sheet metal/Spruce 50 mm Wheel recesses: no Extensions: no Extendable: single telescopic Length1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Telescopic loading platform, designed as an outer and inner tube structure, with a 1,070 mm long, fixed loading platform section at the front. Integrated bolt-on coupling in the fixed loading platform section for connecting tank bridge extension beams; the welded track rails serve as a rail track in the track gauges of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by means of spring accumulators and conical bushings Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear axle: Axle design: Standard Loading height, loaded: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Decking: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Axles: Number of axles: 6 Lift axle: see accessories Axle type: Steered stub axles Axle equalization: hydraulic Axle manufacturer: BPW/Eco Operating positions: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raising/lowering valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steered axles: 6 Steered axle arrangement: all steered Maximum steering angle: 45° Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Gsdpfoyfvf Sjx Afdjbu Rim centering: Center-centered Brake code: According to EU standard: Yes ABS: Yes ALB: Yes EBS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers, see accessories below) Control elements protected on the left in the direction of travel...

Condition: used, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, first registration: 08/1993, next inspection (TÜV): 10/2022, loading space length: 10,000 mm, loading space width: 2,500 mm, suspension: air, tire size: 9.5R 17.5, color: other, gearing type: other, front tire size: 9.5R 17.5, rear tire size: 9.5R 17.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Sales contacts: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Gbodeww Dwhepfx Afdeu Registration service, HU/SP/UVV, delivery to port Very long loading platform – 10.00 m! Hydraulic ramps Ready for operation Width-adjustable Grey-black Additional features: ABS, turntable, air brake, EBS, air suspension, price on request (Mobile), Suspension: air, Payload (kg): 15,600 Body type: width-adjustable, top condition, 10.00 m loading platform, HSN/TSN: 6631/000 Subject to errors and omissions.

Condition: used, axle configuration: > 3 axles, first registration: 07/1992, loading space length: 8,000 mm, loading space width: 2,750 mm, total length: 18,200 mm, total width: 2,750 mm, total height: 2,750 mm, suspension: air, color: other, Year of construction: 1992, Equipment: ABS, = Additional Options and Accessories = - Hydraulic system = Notes = Number of axles: 4, Twin tires, Tare weight: 20,800 kg, Gross vehicle weight: 64,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 3.5 inches, Suspension type: Air suspension, ABS, Hydraulic system, Body construction year: 1992, Body material: Steel, Low-loader type: Low-loader, Loading platform length: 837 cm, Gooseneck length: 427 cm, Axle platform length: 561 cm, Detachable gooseneck, Extendable chassis: Front, Axle type: BPW = Additional Information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Steerable; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 9 mm; Tire tread depth right outer: 10 mm Axle 2: Twin tires; Steerable; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 11 mm Axle 3: Twin tires; Steerable; Tire tread depth left inner: 11 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 10 mm Axle 4: Twin tires; Steerable; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 8 mm Weights Tare weight: 20,800 kg Payload: 43,200 kg GVW: 64,000 kg Functional Loading platform height: 52 cm Environmental Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simply! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Inquire directly about our European warranty package. Gedjzmd Upopfx Afdebu

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system Gsdpfxewpknwe Afdobu • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: used, maximum load weight: 23,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 8,360 mm, loading space width: 2,540 mm, total length: 10,550 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, Low-bed length approx. 5,420 mm, can be widened to 3,000 mm, loading height of the bed: approx. 890 mm, rear slope: 800 mm, upper deck 1,640 mm, front slope 500 mm, hydraulically operated ramps, laterally adjustable (L x W) 3300 x 720 mm, folding supports at the rear, 6 x heavy-duty lashing points per side, 4 x lashing points per side, 4 x stake pocket per side, excavator arm recess / (L x W) 1600 x 740 mm, drawbar with swivel eye 50 mm, rotating beacon, extendable warning signs, BPW EcoPlus axle(s), drum brake system, stainless steel toolbox, spare wheel holder under the body, leaf spring suspension, the vehicle can be covered with advertising and/or lettering. SI87260 Gedoz Amyyjpfx Afdsbu Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please do not hesitate to contact us!

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2007, Equipment: ABS, Vehicle identification number: WG0STZV3570028656 First registered: 05.04.2007 DE HU due Own weight: 14,950 - 18,600 kg Removable gooseneck King pin 3.5" ----Low bed length: 8,000 mm - Loading height: approx. 250 - 350 mm TELESCOPIC by 5,600 mm EXTENDABLE WHEEL HOLDS Chassis frame: 4,100 mm Total length: 16,400 mm Excavator trough - Dipper stick trough Central lubrication system BPW Eco axles with drum brakes with radio control Godpjt Eya Esfx Afdsbu 3 x hydraulically forced-steered axles Axle loads 3 x 10,000 kg Removable gooseneck - fifth wheel load: 18,000 kg Tires: 235/75 R 17.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, functionality: fully functional, machine/vehicle number: WG0STZV4880030398, empty load weight: 19,650 kg, maximum load weight: 59,550 kg, overall weight: 79,200 kg, permissible axle load (axle 1): 11,800 kg, permissible axle load (axle 2): 11,800 kg, permissible axle load (axle 3): 11,800 kg, total length: 16,380 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17,5, tire condition: 75 %, wheelbase: 1,310 mm, trailer brake: trailer braked, Year of construction: 2009, Equipment: ABS, Extendable lowboy semi-trailer, 4m extension, all 4 axles steerable, with or without remote control; all ramps and recesses included for all types of machine transport. Gbedozwphvjpfx Afdsu

Condition: used, maximum load weight: 69,900 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, first registration: 10/2013, loading space length: 27,050 mm, loading space width: 2,550 mm, loading space height: 1,600 mm, total length: 16,550 mm, total width: 2,550 mm, total height: 2,700 mm, Year of construction: 2013, Equipment: ABS, Goldhofer SPZ-DL 6-70/80A 6-Axle Ballast Trailer First registration: 24-10-2013 5x Hydraulically steered BPW Eco Plus axles Steering with remote control Axle 1 is a lift axle Drum brakes with ABS Air suspension Tires: 425/65 R22.5, 100% Total weight: 86,000 kg, Unladen weight: 16,100 kg, Payload: 69,900 kg Loading platform length: 16.20 + 10.85 m = 27.05 m, Width: 2.48 m, Loading platform height: 1.60 m Lashing eyes Gsdezw R S Nspfx Afdebu Beam pockets Errors/typos and prior sale are subject to change.

Condition: good (used), Year of construction: 2008, Gooseneck XLE, tare weight 5,400 kg Kingpin load capacity: 40,000 kg, length x width: 4,255 mm x 2,480 mm Additional information: Central lubrication system / Hatz diesel power pack / Hydraulic claw locking system Goldhofer S-THP XLE 3, technical axle load 3 x 15,400 kg = 46,200 kg Tare weight: 13,500 kg, length: 4,115 mm, width: 2,750 mm, tires: Michelin 285/70 R 19.5 150/147 J Additional information: Hydraulically suspended bogie axles / Central lubrication system Goldhofer STHP XLE 5, axle load 5 x 15,000 kg = 75,000 kg Tare weight: 27,800 kg, length: 6,720 mm, width: 2,750 mm, tires: Michelin 285/70 R 19.5 150/147 J Additional information: Hydraulically suspended bogie axles / Central lubrication system Trailer bridge, length: 7,000 + 3,400 mm = 10,400 mm, width: 2,850 mm – 3,290 mm, height: 550 mm Godpszx Td Dofx Afdebu = Further information = Year of manufacture: 2008 Unladen weight: 46,700 kg Payload: 114,500 kg GVWR: 161,200 kg Technical condition: good Optical condition: good Price: On request

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2007, total width: 2,550 mm, Equipment: ABS, Vehicle identification number: WG0STZV3570028560 First registration: 03/30/2007 German TÜV inspection due Tare weight: 14,950 - 18,600 kg Gooseneck detachable Gbjdpfx Aozcr Sisfdou Kingpin 3.5" ----Low-bed length: 8,000 mm - Loading height: approx. 250 - 350 mm TELESCOPIC by 5,600 mm WIDTH-ADJUSTABLE WHEEL WELLS Chassis frame: 4,100 mm Overall length: 16,400 mm Excavator well - Bucket arm well 2 x Central lubrication system BPW Eco axles with drum brakes 3 x Hydraulically steered axles Axle loads 3 x 10,000 kg Gooseneck detachable - Fifth wheel load: 18,000 kg Tires: 235/75 R 17.5 Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of a purchase agreement. The description according to the purchase agreement is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2008, Equipment: ABS, Vehicle Identification Number: WG0STZV3580032220 First registration: 24.06.2008 German MOT due Unladen weight: 14,900 – 18,000 kg Detachable gooseneck King pin 3.5" ----Low-bed length: 7,800 mm – Loading height: approx. 470 mm TELESCOPIC up to 5,400 mm WIDTH-ADJUSTABLE Wheel recesses Chassis frame: 4,100 mm Excavator trough – dipperstick recess Central lubrication system BPW ECO axles with drum brakes, remote control 3 x hydraulically steered axles Axle loads 3 x 10,000 kg Detachable gooseneck – fifth wheel load: 24,000 kg Central lubrication system Tyres: 235/75 R 17.5 Gedpfx Afoxwf Tnedobu Changes, prior sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty as defined by sales law. The binding description is that stated in the purchase contract. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quotation through our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.