Used Goldhofer Low Loader Semitrailers (Construction Machinery) for sale (89)

Condition: used, functionality: fully functional, maximum load weight: 80,000 kg, overall weight: 80,000 kg, axle configuration: 3 axles, suspension: air, tire size: 285/70R19.5, color: blue, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, Heavy Duty Trailer Good Condition Dsdpezzc Dxefx Ak Tskt Full Power Steering 45T Neck 45T Bogie

Condition: new, maximum load weight: 87,500 kg, overall weight: 120,000 kg, axle configuration: > 3 axles, os 1. Type STZ-VP 8 (245) (3+5) with pendulum axles The specified technical data is only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights Speed 80 km/h Fifth wheel load 22,000 kg-30,000 kg Axle load 8 x 12,000 kg GVWR 120,000 kg Own weight approx. 32,500 kg Payload? Approx. 87,500 kg (depending on the load diagram / easyLOAD calculation) Dimensions: Dimension b 21,990 mm - 26,490 mm, Total combination length: Vehicle width 2,750 - 3,000 mm Gooseneck length x width: 3,700 mm x 2,480 mm, Fifth wheel height (loaded): 1,300 mm, Turning radius front / rear: 1,370 mm / 2,835 mm, Kingpin: 3.5" 3-axle chassis, front wheelbase: 2 x 1,510 mm, Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering: Axle arrangement (counter-steered) Excavator bed: Single telescopic Length x width: 7,000 mm x 3,000 mm · Telescopic by / to max. 4,500 mm / 11,500 mm. Overall height 450 mm. Loading height when loaded: approx. 600 mm with 150 mm ground clearance. Dksdpfswc Inhox Ak Tst Stick width 1,350 mm. Mattresses and outriggers removable. 5-axle chassis, rear. Wheelbase 4 x 1,510 mm. Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S. Steering: Forced steering. Radio remote control.

Condition: used, maximum load weight: 46,300 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 03/2001, Braking system completely overhauled with brake shafts, brake cylinders, etc. Vehicle is in good condition All Michelin tires 90% Goldhofer-STZ gooseneck 24 t Loading length 3,500 x 2,480 mm interchangeable 2" kingpin Dksdewn Awhopfx Ak Tjt built-in hydromechanical steering designed for a fifth-wheel load up to 24 tons Aluminum side walls, 4-sided Steering radius 2700 mm for 4-axle tractor unit Low-bed bridge Low-bed with internal tube Low-bed length 7,800 mm, extendable by 4,800 mm Flatbed width 2,550 mm Build height 350 mm Loading height loaded approx. 550 mm with 200 mm ground clearance 4-axle running gear air-suspended chassis (LxW) approx. 5,730 x 2,550 mm incl. lift and lower valve, with 4 forced-steered axles, Brand: Gigant, wheelbase 3x 1,310 mm Driving heights 925 mm (+/-100 mm) Brake system: two-line all-wheel air brake system Progressive central lubrication system, brand BEKA-MAX Fifth wheel height loaded: 1,290 mm all 4 axles hydraulically steered Electric unit Radio remote control

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions - Dimension b: 18,765 mm - Overall train length: 24,165 mm Dkodpswg N N Iefx Ak Tjt - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering

Condition: used, machine/vehicle number: WG0TU0033W001xxxx, Year of construction: 1998, Please provide reference number upon request: 23361 Specifications: 1998 model Length: 1135 cm Wheelbase: 480/140 cm Net weight: 6450 kg Permitted total weight: 30,000 kg Permitted payload: 23,550 kg Spring-loaded bridges Good winter tires (see pictures) Summer tires Ready for delivery   Description: Dkedpfx Akozqmkzo Tet 1998 Goldhofer 24/80 machine trailer w/ two sets of tires. There are good winter tires on the trailer. Ready for delivery. Technical approved: no EU-approved until: 26.08.2026 Own weight: 6450 Total Weight: 30000 Model: Goldhofer 24/80 maskinhenger m/ to sett dekk = More information = Please contact ATS Norway for more information

Condition: used, maximum load weight: 38,200 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 04/2007, next inspection (TÜV): 05/2027, with air suspension, forced steering, with rear inclination, and loading ramps STZ-L gooseneck - designed loading platform 3,500 x 2,480 mm - inclination: Witgenschräge - ball bearing-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - mechanical fifth wheel supports - turning radius 2,300 mm Loading platform - 1 pair of wheel recesses, rotatable after the gooseneck, depth 380 mm, length at the top 2,560 mm - 1 pair of wheel recesses after the 1st axle, depth 250 mm, length at the top 1,500 mm Chassis - air-suspended 3-axle chassis - Gigant axle assembly, consisting of one non-steered axle and two forced-steered steering knuckle axles - lifting and lowering valve Vehicle rear - design with inclination: 500 mm - hydraulic rear support Loading ramps - 1-piece hydraulic ramps with length 2,900 mm, width 720 mm Braking system - 2-circuit all-wheel pneumatic braking system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABS braking system Technical data Gooseneck Loading platform (L x W): 3,500 x 2,480 mm Fifth wheel height, loaded: 1,215 mm Loading platform Loading platform (L x W): 9,100 x 2,500 mm Loading height, loaded: 885 mm (+140/-60 mm) Dkjdpfx Aozvaaask Tjt Steering 1st axle: non-steered 2nd axle - 3rd axle: forced-steered Electrical system

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 14 kg, permissible axle load (axle 2): 14 kg, permissible axle load (axle 3): 14 kg, loading space length: 21,200 mm, loading space width: 2,750 mm, loading space height: 1,240 mm, total length: 21,200 mm, total width: 2,750 mm, total height: 1,240 mm, suspension: hydraulics, tire size: 285 / 70 R19.5 (150/148J), color: blue, Year of construction: 2012, Colour: Blue Payload weight: 110,550 kg Extendable Main Features Manufacturer: Goldhofer Type: THP / XLE 8 (3+5) Low Loader Chassis number: WG0THPX57B0030736 VIN Gooseneck: WG0SH0005B3030736 VIN XLE 3: WG0XLE034B0035242 VIN XLE 5: WG0THPX57B0030736 Year: 2012 Weights/Loading Capacity King-Pin load: 27,000 kg Axle load: 14,000 kg Total axle load: 8 x 14,000 kg = 112,000 kg GVW: 139,000 kg Empty weight: 28,450 kg Loading Capacity: 110,550 kg Axles BPW Pendle Axles Axle distance: 1360 mm / 1400 mm EBS/ABS Tyres: 285 / 70 R19.5 (150/148J) Hydraulic steering and suspension Radio remote control Dimensions Total length: 21,200 mm Loading floor length: 6,000 mm Loading floor extension: 8,500 mm Max loading floor length: 14,500 mm Loading floor thickness: 450 mm Loading floor clearance: 200 mm Loading floor width: 2,750 mm / 3,250 mm Bogie width: 2,750 mm Bogie height: 1,240 (+/- 300) Excavator boom recess: 700 mm Additional Information Hydraulically operated via truck PTO King pin 3.5” Central lubrication Remote control operated Dsdpfxoxx Sv Eo Ak Tjkt Detachable gooseneck Hydraulic quick couplings Marker boards for oversized loads Working lights Orange warning light Ramps for loading onto the floor Extra tables for extending the loading floor = Further Information = General Information Year of manufacture: 2012 Axle Configuration Tyre size: 285 / 70 R19.5 (150/148J) Axle brand: BPW Suspension: hydraulic suspension Mid-axle 1: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Mid-axle 2: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Mid-axle 3: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 1: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 2: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 3: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 4: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 5: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Weights Empty weight: 28,450 kg Payload: 110,550 kg GVW: 139,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request

Condition: used, maximum load weight: 38,000 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 03/2009, with air suspension, hydromechanical forced steering, and single-extendable loading platform, STZ-L Gooseneck - Robust steel welded construction - Designed loading area 3,500 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in a low-profile design (overall height 235 mm) with adjustable guide elements - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as an outer-inner tube construction with a fixed 1,000 mm front loading platform section - Locking of the extension stages via spring-loaded cylinders and conical bolts Chassis Dodpfoyrzwtox Ak Tokt - Air-suspended 3-axle chassis - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for lowering to min. 825 mm or raising to max. 1025 mm - Load height 1: 885 mm - Load height 2: 925 mm Rear end of the vehicle - Straight design - Short 1,000 mm rear overhang from the center of the last axle - Mechanical rear support Brake system - 2-line all-wheel pneumatic brake system with diaphragm brake cylinders - Automatic load-dependent braking (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake Special equipment - "BekaMax" central lubrication system - Electrical unit - Radio remote control Technical data Gooseneck Loading area (LxW): 3,500 x 2,480 mm Construction height above fifth wheel coupling: 235 mm Coupling height loaded: 1,300 mm Loading platform Loading area (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In stages up to (LxW): 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd ride position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced steered (dual-circuit steering)

Condition: used, functionality: fully functional, machine/vehicle number: WG0STZV4880030398, empty load weight: 19,650 kg, maximum load weight: 59,550 kg, overall weight: 79,200 kg, permissible axle load (axle 1): 11,800 kg, permissible axle load (axle 2): 11,800 kg, permissible axle load (axle 3): 11,800 kg, total length: 16,380 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17,5, tire condition: 75 %, wheelbase: 1,310 mm, trailer brake: trailer braked, Year of construction: 2009, Equipment: ABS, Extendable lowboy semi-trailer, 4m extension, all 4 axles steerable, with or without remote control; all ramps and recesses included for all types of machine transport. Dkodpfozwphvjx Ak Tst

Condition: used, overall weight: 120,000 kg, axle configuration: > 3 axles, first registration: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" kingpin, and adjustable steering wedge - Built-in hydromechanical double steering for attachment of pendle axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential lock - Designed loading area (approx. 3,700 x 2,440 mm) with chequer plate cover - Engineered for a technical fifth-wheel load up to 30 t - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling heights loaded: 1,350 mm - Aluminium side walls (400 mm high, on all 4 sides) Goldhofer Heavy-Duty Chassis Module Type THP/ET 3 - Load bed length 4,200 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units Dkodpfxewuixfs Ak Tjt - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg Goldhofer THP-ET Vessel Bridge – 75 t Payload Hydraulically extendable vessel bridge, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total vessel bridge length 9,900 mm Internal bridge length approx. 7,500 mm Technically extendable by approx. 5,500 mm Main Beam Dimensions Length: 7,500 mm + 5,500 mm Build height: 500 mm, Width bottom: 470 mm, Width top: 320 mm Goldhofer Heavy-Duty Chassis Module Type THP/ET 5 - Load bed length 7,000 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg

Condition: used, Year of construction: 2002, 2002 Goldhofer STZ-L5-55/80: Available with short notice. Dsdpfx Aezarf Dek Tskt 5-axle low-bed trailer 1st axle steered 4th and 5th axles steered 3.5-inch kingpin This offer is non-binding and does not include any guarantee or warranty. Subject to prior sale. A reservation requires a deposit of 10% of the purchase price. Until payment is received, no reservation or claim to availability exists. The purchase is only concluded upon receipt of payment. The vehicle remains the property of MSG Andert GmbH until fully paid. Payments are accepted exclusively in euros, without any additional costs to the seller, and only by bank transfer. No checks accepted.

Condition: used, axle configuration: > 3 axles, first registration: 08/2002, loading space length: 7,800 mm, loading space width: 2,550 mm, loading space height: 400 mm, total length: 17,340 mm, total width: 2,550 mm, suspension: air, Year of construction: 2002, Additional information : Brand: GOLDHOFER Model: STZ-VL4 Structure: low loader ( lower platform 7800 mm + 4900 mm extendable / higher platform 5400 mm loading height 400 mm ) Year: 08.2002 Suspension: air Brakes: drum Dimensions: L/W: 17340 mm + 4900 mm extendable / 2550 mm Masses: full / empty: 50000 kg / 12840 kg Suspension type : air Djdpjuwtyqefx Ak Tekt Brakes : Drum Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Steering : Steering = More information = Suspension: air suspension Middle axle 1: Steering Middle axle 2: Steering Rear axle: Steering Empty weight: 12.840 kg Carrying capacity: 37.160 kg GVW: 50.000 kg

Condition: excellent (used), first registration: 12/2014, loading space length: 19,000 mm, loading space width: 4,700 mm, loading space height: 450 mm, total length: 24,250 mm, total width: 2,750 mm, total height: 11,500 mm, wheelbase: 1,360 mm, color: red, Year of construction: 2014, Weights Unladen weight: 41,500 kg Payload: 76,500 kg Dodjzv Snvepfx Ak Tekt GVW (Gross Vehicle Weight): 118,000 kg Functional Features Body manufacturer: Goldhofer STZ-VP8 3+5 Low Loader with Extension Beams Loading platform height: 45 cm Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: Upon request Product Safety Manufacturer: Goldhofer DE

Condition: new, empty load weight: 11,800 kg, maximum load weight: 36,700 kg, overall weight: 48,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Equipment: ABS, Gooseneck, rigid, in a center tube design: -Front corners 90° -Closed outer frame with cutouts for lashing straps -Hole strip for aluminum loading ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° incline at the end of the gooseneck -3 pairs of lashing rings recessed in the loading area of the gooseneck, 2 pairs of beam pockets 100 x 50 mm in the loading area of the gooseneck Loading platform: -Closed outer frame with cutouts for lashing straps -Fixed front section 360 mm -Floor covering: sheet metal with anti-slip coating -Excavator well incl. elongated holes for load securing -1 pair of permanently installed wheel wells in front of the first axle, 390 mm deep incl. climbing strips in the incline -1 pair of permanently installed wheel wells between the first and second axles, 390 mm deep, incl. climbing strips in the incline -Technically maximum extension of 3,740 mm -Aluminum wheel well cover "Premium", full width 600 mm, can be extended to 3,000 mm with 8 t axle load -Different wheel well depths by using the wheel well cover (depth approx.: 390 mm and 260 mm) -Inclinined vehicle rear 8°, 550 mm length -Sled design for easy attachment and removal of ramps -Mechanical, spring-supported comfort outrigger supports at the rear of the vehicle for support during loading -Continuous mud flap at the rear -1 pair of lashing points LC 10,000 daN in the middle at the start of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform 3-axle chassis: -Axle manufacturer BPW ECO Max, air-suspended -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors mounted on the rim -2 axles with hydraulic forced steering and 1 rigid axle -Braking system manufactured by Knorr (according to EU regulations with EBS-E) Dkodszdzunopfx Ak Tst -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing steering system via a wireless remote control or button on the gooseneck, incl. single-axle function -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle possible via TIM) Ramps, 2-piece: -L x W 4,300 x 800 mm -Load capacity 38 t; floor covering: larch -Integrated mechanical locking mechanism in the ramp lifting cylinder to secure the ramps in the transport position -Ramp operation: lifting and shifting hydraulically -The wireless remote control for controlling the trailing steering system can also be used to control the rear functions -Electro-hydraulic unit for ramp operation Included accessories: -Headboard incl. parking position for rear panel, approx. 400 mm high -Spare wheel holder standing at the front of the gooseneck, incl. spare wheel -Chocks incl. holder -Beams for widening to 3,000 mm -Aluminum plug-in side boards 400 mm high, consisting of 2 side boards, each approx. 3,150 mm long, and rear side board with beams (galvanized) -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for flashing beacon -One plug-in partition plate at the end of the excavator well -Traffideckgo rubber covering, 8 mm construction height in the outer area of the loading platform including rear incline, without fixed loading platform section in the

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 Dsdpfxewxm Ile Ak Tokt * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, empty load weight: 22,900 kg, maximum load weight: 41,100 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 10/2009, suspension: air, tire size: 235/75 17,5, tire condition: 70 %, color: green, Year of construction: 2009, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40194 Goldhofer, STZ-VL4-42/80A * Year of manufacture: 2009 * ABS, Anti-lock Braking System * Air suspension * Steerable axle * Air connection, coupling head (red + yellow) * Spare tire holder with spare tire * Connection plug, 2x7-pole * Lifting and lowering device * Extendable * Telescopic – Telescopic drawbar trailer * Heavy-duty lashing rings * Suspension: Air * Gross vehicle weight: 64,000 kg * Tare weight: 22,900 kg * Payload: 41,100 kg * Permissible gross vehicle weight: 64,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 4th axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Telescopic extension, approx. 4000 mm * Platform height above axles: approx. 1000 mm * Platform height above ground: approx. 360 mm * Extendable to 3200 mm * Detachable gooseneck Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. Dkodpsyict Uefx Ak Tjt * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, overall weight: 11,500 kg, first registration: 12/1994, Structure: Dkodpjzix Rqofx Ak Tet Very good condition, fully extendable to a total length of 18.5 m.

Condition: used, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2019, loading space length: 10,500 mm, loading space width: 2,550 mm, total length: 11,720 mm, total width: 2,550 mm, total height: 3,570 mm, Goldhofer drawbar trailer TU-L 4 with 4 axles Type: TU-L 4 Axles: BPW Suspension: Air 2x hydraulic ramps Payload: 30,600 kg * Lashing points * Turntable Dksdpfx Akszwh Rvs Tst We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Technical condition: very good Dodpfx Aeykz Uiok Tokt Visual condition: very good

Condition: used, maximum load weight: 76,000 kg, overall weight: 107,000 kg, axle configuration: > 3 axles, first registration: 04/2013, next inspection (TÜV): 04/2027, Hydraulically raiseable and lowerable XLE gooseneck - detachable and simplified design - ball bearing swivel plate, 3.5" kingpin and adjustable steering wedge - integrated hydromechanical dual steering for articulating axle steering (2-circuit steering) - hydraulic locking - hydraulic raising and lowering function - hydraulic differential lock - steering radius of 2,800 mm for a 4-axle semi-trailer - designed loading platform (approx. 3,600 x 2,480mm) with non-slip steel plate surface and beveled front corners - designed for a technical saddle load of up to - gooseneck designed for direct attachment of the excavator bridge claws as well as for direct coupling of the 2-axle chassis Goldhofer 2-axle chassis with THP/ET special wheelsets two single-tire articulating axle units with hydraulic axle equalization with a total of 4 wheels per axle line - chassis width 2,750 mm, wheelbase 1,400 mm - technical axle load per axle line max. 14 tons (65 km/h) - max. steering angle of the articulating axles approx. 70 degrees - loading height in center position 1,250 mm, loaded - hydraulic axle travel +/- 300 mm - 2-circuit hydromechanical steering system - 2-line all-wheel air brake with spring-loaded parking brake, ALB brake and automatic slack adjuster (AGS) - ABS brake - hydropneumatic gas spring accumulator, switchable off during loaded travel - 2 special coupling lugs in special design on the front of the chassis, only for coupling the front Dkedpfx Akszuu Rdo Tst simplified hydraulic gooseneck - adapter element integrated in the frame at the rear in a short and narrow compact design for connection between the chassis and the excavator low-bed bridge - hydraulic locking at the joint between adapter and excavator bridge - double-acting axle equalization cylinders Goldhofer - 80 ton - excavator bridge, telescopic with widening elements, can be converted to a low-bed bridge Main features - designed for a payload of 80,000 kg - welded construction made of fine-grained steel StE 690, designed as a box-shaped tube - height of the outer tube 400 mm - basic dimensions (LxW) approx. 6,250 x 1,350 mm, telescopic in length by approx. 6,750 mm to a total length of approx. 13,000 mm - inner tube (approx. 600mm wide) projecting into the chassis frame under the excavator trough - side flanks of the outer tube prepared for attaching folding widening elements - fixed transverse beam 1,350 mm wide at the attachment point at the front - full payload even when the excavator bridge is fully extended Goldhofer 4-axle chassis, Type THP/ET trough in optimized special design - two single-tire articulating axle units with hydraulic axle equalization with a total of 4 wheels per axle line - chassis width 2,750 mm, optimized wheelbases 2 x 1,310 + 1x 1,400 mm - technical axle load per axle line max. 14 tons. (65 km/h) - max. steering angle of the articulating axles approx 60 degrees - loading height loaded 1,140 mm (+/-200 mm) - total hydraulic axle travel 400 mm - 2-circuit hydromechanical steering system - 2-line all-wheel air brake with spring-loaded parking brake, ALB brake and automatic slack adjuster (AGS) - ABS - hydropneumatic gas spring accumulator, switchable off during loaded travel - continuous 490mm deep excavator trough in the chassis frame, width approx. 700mm, incl. retractable plates, design aluminum, at the front and rear of the excavator trough - box-shaped frame outer tube under the excavator trough for accommodating the telescopic inner tube of the excavator bridge

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Dkedei Rqi Sspfx Ak Tet Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: > 3 axles, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Central lubrication Djdpfx Ajzxz N Usk Tokt = More information = Empty weight: 16.500 kg Carrying capacity: 53.500 kg GVW: 70.000 kg

Condition: new, overall weight: 94,000 kg, axle configuration: > 3 axles, Goldhofer SX-L2 2-axle dolly Support legs for parking the unit when unloaded - 3.5" heavy-duty fifth wheel coupling recessed at the top between the main frame longitudinal members - Rear chassis frame with attached unsteered axle with air suspension in the shortest possible compact design - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Twin tires on steel disc wheels - Dual-circuit all-wheel air brakes with diaphragm brake cylinders, spring-loaded parking brake - BPW axles - Air suspension Construction 1 double-stanchion loading platform Stanchion spacing individually adjustable via spindle Removable stanchions Double pockets per carriage 4 stanchions made of square tubes Lashing eyes at the bottom of the platform Slewing ring lock for empty travel Goldhofer 5-axle trailer SN-L5 5 BPW Axle load 5 x 12 tons Air suspension Smartboard Drawbar 1,500 mm long, 40 mm eyelet Body 1 double-stanchion loading platform Stanchion spacing individually adjustable via spindle Removable stanchions Double pockets per carriage 4 stanchions made of square tubes Dodpewcy Duefx Ak Tekt Lashing eyes at the bottom of the platform Slewing ring lock for empty travel Steering Steering axles on 2 bogies with BPW slewing rings Later axle with self-steering and auxiliary steering for shunting purposes, including radio-controlled operation Hydraulic adjustment from 20-70 m. Display of the selected support span Self-steering can be switched off when driving with the drawbar Auxiliary steering Electro-hydraulic Electro-hydraulic Pump unit Brakes Dual-line pneumatic brake system with 8 diaphragm brake cylinders Designed for a 12-ton axle load each Central lubrication Electric brake valve Lifting and lowering system Radio remote control Connecting cables 2 x 25 m

Condition: used, axle configuration: > 3 axles, first registration: 01/1985, total width: 3,780 mm, total height: 3,330 mm, Special low-loader for heavy transport, payload approx. 60,000 kg to 80,000 kg depending on application, whether for road or internal use. Loading platform length with slope approx. 12,400 mm, width 3,200 mm, extendable to 3,700 mm. Hydraulic axle compensation, hydromechanical steering on 6 axles (front and rear), 4 x hydraulic support cylinders, hydraulic ramp at front and rear, loading possible from both sides, towing hitch on both sides. Ideal for shunting or transport in very confined spaces. The vehicle may have advertising and/or signage applied. Dedpfx Ajyc Amdsk Tskt

Condition: used, maximum load weight: 38,000 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 03/2009, with air suspension, hydromechanical forced steering, single telescoping loading platform, STZ-L gooseneck - robust steel welded construction Dksdjyrzv Nspfx Ak Tjt - designed loading area 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in a flat design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge Loading platform - single telescoping, designed as an outer-inner tube construction with a 1,000 mm long fixed front deck section - locking of the extension stages via spring-loaded cylinders and conical bolts Chassis - air-suspended 3-axle chassis, - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a lowering to at least 825 mm or a raising to a maximum of 1025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of the vehicle - straight design - short 1,000 mm overhang from the center of the last axle - mechanical rear support Brake system - 2-line all-wheel air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake Special equipment - "BekaMax" central lubrication system - Electric aggregate - Radio remote control Technical data Gooseneck Loading area (LxW): 3,500 x 2,480 mm Build height over fifth wheel: 235 mm Fifth wheel height loaded: 1,300 mm Loading platform Loading area (LxW): 10,000 x 2,550 mm Telescopable by 7,500 mm in stages up to (LxW): 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd transport position: 885 mm (+140/-60 mm) Steering 1st – 3rd axle hydromechanically forced-steered (dual-circuit steering)