Used Müller-Mitteltal Edu Trailers for sale (263)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour markings on sides and rear * Hinged (hot-dip galvanized) lid for toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with lashing capability * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – corners rated 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for 3 m overall width (not included in the rear slope) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle up to the end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the arm rest) * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm) Rodpfx Ahol Th Adjzjl * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technically permissible gross weight: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 09/2026

Condition: used, maximum load weight: 7,950 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 08/2010, next inspection (TÜV): 02/2026, loading space length: 6,000 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 3,050 kg Payload: 7,950 kg Overall length: 8,100 mm Rjdsx E I Utepfx Ahzjl Loading length: total approx. 6,000 mm Width: 2,550 mm / loading width approx. 2,470 mm Loading height: 900 mm Additional information - Height-adjustable drawbar - Support leg - 400 mm drop sides, spring-mounted - E-wheel - BPW axles - Spring ramps with grating, laterally adjustable - Climbing strips, rear stabilizer - Large lashing package

Condition: used, maximum load weight: 22,450 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 05/2026, loading space length: 11,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2018, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- * Müller Mitteltal TS2 Profi * Hydraulic ramps * Steering axle * Winch * Platform 8m * Loading height approx. 90 cm * Total loading area 11.5 m * Unladen weight 8,550 kg Rodpex Hcuwsfx Ahzsl * Container locking device at the front * Air suspension * Safety inspection (SP) 11/2026 * Technical inspection (TÜV) 05/2026 ## German semi-trailer from first owner ## Financing/Leasing/Hire purchase possible on request ---- Advertising/company logos on the vehicles may have been digitally removed from the pictures. ----Contact person via phone or WhatsApp: (German, English, Arabic) (German, English) ---- We look forward to your visit. To make your appointment as pleasant as possible, we ask you to schedule it in advance. ----Subject to errors, mistakes and prior sale. All information without guarantee, in particular regarding features and accessories.

Condition: used, empty load weight: 5,600 kg, maximum load weight: 12,400 kg, first registration: 02/2012, next inspection (TÜV): 01/2025, total width: 25,500 mm, suspension: air, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 18,000 kg,

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Rjdpfxsuwvbqo Ahzsl Suspension: steel Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg = More information = Suspension: leaf suspension Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information

Condition: used, maximum load weight: 29,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 09/2026, loading space length: 14,910 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Low-bed trailer, loading area length 5500 mm, extendable to 3000 mm wide, foldable widening panels, loading height approx. 630 mm, gooseneck dimensions (LxW) 3510x2485 mm, 400 mm high aluminum side walls, height difference between gooseneck and bed 845 mm, raised bed 4220 mm, rear slope 870 mm, front slope 880 mm, hydraulically operated, laterally adjustable loading ramps (LxW) 2800x800 mm, electro-hydraulic unit for hydraulic functions, NATO external jump-start socket, 8 heavy-duty lashing rings per side, 3 lashing brackets per side, rotating beacon, support winches, folding rear supports, extendable warning panels, ABS, EBS, BPW Eco axles, axles with hydraulic forced steering, drum brake system, air suspension with raising/lowering device. Vehicle may be decorated and/or labeled with advertising. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! Vehicle may be decorated and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Rsdpfsxvwb Iox Ahzol We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Device for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7-ton Gigant Axles * Parabolic Springs with Equalizer * Height-adjustable Drawbar by 300 mm * Drawbar Extension by 250 mm to 2,250 mm * Jost Landing Gear at the Front * Externally Mounted, Hot-dip Galvanized Folding Support Legs at the Rear Rjdpforvvflox Ahzjl * Plastic Toolbox, Front Right, on Bulkhead * Side Underrun Protection * Plastic Quarter Mudguards * Hot-dip Galvanized Chassis and Drawbar * Front Bulkhead * Rear Wall * Tailgate and Loading Ramps * 50 mm Softwood Floor * Preparation in Front of Bulkhead for Subsequent Installation of Container Locks * Bolted Bulkhead from Smooth Sheet Metal * Trapezoidal-profile Fold-down Steel Sidewalls with Sideboard Spring Assist * Slide-in Steel Rear Wall between the Ramps—mounting bracket for storage inside the front bulkhead when not in use * Bolted Rear Stanchions * Perforated Outer Frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t recessed lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various drillings for 1.2 t lashing options on the front and end cross members * One-piece Mechanical Grid Loading Ramps with Spring Mechanism for Single-person Operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear Entry Slope approx. 860 mm * --Reinforced and Certified Structure according to EN 12642 XL including Load Securing Certificate-- * Sideboard Color in RAL 9010 Pure White * Sidewall Painting in Any RAL Color Available at Extra Cost * New Vehicle with Manufacturer’s Warranty * Subject to Errors and Prior Sale * Available from Calendar Week 08/2026

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 03/2015, next inspection (TÜV): 02/2026, loading space length: 5,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,900 kg Unladen weight: 3,150 kg Payload: 8,750 kg Overall length: 7,700 mm Loading length: approx. 5,300 mm Width: 2,550 mm / Loading width approx. 2,500 mm Loading height: 900 mm Further information: - Drop sides 400 mm, foldable, with drop side spring - Rear drop side - Support legs front and rear - Split loading ramps, laterally adjustable, approx. 3,300 mm long - BPW axles - Large lashing package - Underrun protection Rsdpfjx E I Ugex Ahzol

Condition: used, maximum load weight: 22,450 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 05/2026, loading space length: 11,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2018, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- * Müller Mitteltal TS2 Profi * Hydraulic ramps * Steering axle * Winch * Platform length: 8m * Loading height approx. 90cm * Total loading area: 11.5m * Unladen weight: 8,550kg * Front container locking system * Air suspension * Safety Inspection (SP): 11/2026 * Technical Inspection (TÜV): 05/2026 ## German semi-trailer from first owner ## Financing/Leasing/Hire purchase available on request. ----Please note: Advertising or company logos on the vehicles may have been digitally removed from the pictures. Redpfx Ahjx Hcuqszjl ----Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To make your experience as pleasant as possible, please arrange an appointment in advance. ----Errors, omissions and prior sale excepted. All information without guarantee, especially regarding equipment and accessories.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (tire pressure monitoring system) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer unit * Drawbar adjustable in height by 300 mm * Drawbar extension of 250 mm to a total of 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox at front right, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Provision in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profile steel, fold-down with drop side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket inside at the front wall when not in use Rjdpfeq Dyvvsx Ahzol * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees, with 2 t lashing capacity every 480 mm. Installation of 3 t folding lashing rings every 600 mm possible. Each front and rear corner with 1 x 6.3 t lashing ring; multiple 1.2 t lashing points in the front and rear crossmember. * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm * Reinforced and certified body according to EN 12642 XL including load securing certificate * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available for a surcharge * New vehicle with manufacturer's warranty * Subject to alteration and prior sale * Available from calendar week 08/2026

Condition: used, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2002, loading space length: 9,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 7,500kg Payload: 16,500kg / 22,500kg Total length: 11,600mm Load length: total approx. 9,250mm / low bed approx. 7,150mm / gooseneck 2,100mm Width: 2,550mm / loading width approx. 2,500mm Loading height: 900mm More information: - Wheel recess - Excavator arm recess - Hydraulic ramps, split, approx. 640x3,300mm - Extendable to 3m - Warning panels - Storage compartment under loading area - Large lashing package - Gooseneck storage compartment - Stake pockets - LED reversing lights - Twin tires 235/75R17.5 Rjdpfxox E I Uaj Ahzsl - BPW axles - Underrun protection Additional 3- and 4-axle low-bed trailers, new and used, available immediately. More information at

Condition: new, maximum load weight: 24,020 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0: * EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame Redpfx Ahjl Th Nnozjl * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel splash guards, each fitted with spray protection * Reflective contour markings on the sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at the rear * Towing bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each also equipped with lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 6 pairs of UVV swing-down and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t load capacity at the corners and 10 t elsewhere * 6 pairs of mechanical folding outriggers for a total width of 3 m (not on the rear chamfer) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp shift * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black * 235/75 R 17.5 twin tires * Curb weight approx. 5,980 kg * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from calendar week 11/2026

Condition: used, maximum load weight: 22,300 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 03/2008, loading space length: 9,000 mm, loading space width: 2,540 mm, loading space height: 950 mm, total width: 2,550 mm, Gross weight: 24,000kg / 30,000kg Unladen weight: 7,700kg Payload: 16,300kg / 22,300kg Overall length: 11,500mm Loading length: total 9,000mm / rear recess 1,000mm Width: 2,550mm / loading width 2,540mm Loading height: approx. 950mm Further information - Hydraulic ramps, split, approx. 4,000mm long x 790mm wide - Ramps covered with rubber Rodpsx Egxuefx Ahzsl - Twin tires 235/75R17.5 - Gigant axles - Warning panels at front and rear - Large lashing package - Underrun protection - Toolboxes left, right, front - Rear support

Condition: new, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Rear folding A-board ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front section including 2 removable skip stops at the front, lockable in 2 positions * Rear traverse for attaching aluminium loading ramps, incl. 2 additional rear drop-down supports ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable skip stops, can be locked in 2 positions for side centering of skips * 1 x (13.5 t) UVV lashing point per side for attaching tie-down elements * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: Rodpfx Ahol Th Dmezel * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoirs painted in black ----General Info: * Vehicle registered for one day in 06/2024, due to missing tyre pressure monitoring system; never loaded or used * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf (A7)

Condition: new, maximum load weight: 14,680 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders Rjdpfx Ajv Nulzohzjl * Disc brakes * 2 x 10-ton BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side * Side storage box 1,000 x 500 x 500 mm * Closed plastic mudguards, front and rear axles * Closed side underrun protection usable as advertising panel * Rear underrun protection * Rear plastic bump stops * Rear hazardous materials sign * 15-pin electrical connector * LED tail lights * Roller conveyor length approx. 6,830 mm * Pneumatic 4-point clamp locking system * Mechanically adjustable stop brackets (2 positions) front left and right on guide rails * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Gross vehicle weight of 20,000 kg technically possible-- * Approx. 1,130 mm loaded ride height * Suitable for container lengths from 5,500 to 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, turntable, and drawbar * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 09/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corner load capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extension arms for a total width of 3m (not in the rear slope) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) Rjdpsl Thxasfx Ahzsl * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm rear ramp angle) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tank etc. painted in a shade of black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Total technical gross weight permissible: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 09/2026

Condition: new, maximum load weight: 24,020 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning plate packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear reflective contour tape * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm Rjdpfxel Th I As Ahzsl * Hinged lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Coupling arm with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power connector * Four stake pockets per side (no stakes included), with integrated lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of swiveling and lowerable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stowed in the center of the loading platform * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, towing arm and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 11/2026

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW axles * Air suspension with lifting and lowering system and RtR valve * Starting aid for maneuvering purposes switched to the first axle via EBS (without installation on the truck side) * Smart board mounted on the trailer as an information tool with pressure sensors for displaying the total axle load * Last axle as a trailing steering axle with electro-pneumatic steering lock * Trailing axle locked by the driver. for maneuvering purposes switched via EBS (without truck-side installation) * 2nd kingpin position 2 * side impact protection, support winches at the front and swivel supports at the rear of the chassis * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket on the rear side for extra-long lighting * Side marker lights with indicator control * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * mech. adjustable warning sign packages at the front and rear * straight sheet steel mudguards * spare wheel holder in front of the bulkhead cross member (without spare wheel) * saddle platform with 45° bevelled front corners and front tool box made of galvanised powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminium side walls (in the desired RAL colour) on the side of the saddle platform, foldable and removable * rear wall -150 mm- high * rear slope on the saddle platform to the low bed approx. 700 mm long with checker plate covering and a perforated strip at the end for hanging aluminium docking ramps * saddle platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * tear plate over the axles * 9 x mechanical folding extensions to 3 mtr. Total width but not in the rear slope (widening planks available with closed storage compartment across the direction of travel under the loading area) * 3 slots under the saddle platform for storing optional aluminum ramps or wooden planks for wheel well cover Redpeq Euakjfx Ahzjl * Swivel arm as a support for connecting cables from the truck to the trailer * LaSi package consisting of: outer frame perforated on the saddle platform, bent at 45° with hole pattern for lashing devices (2 tonnes lashing force per lashing point at a distance of at least 480 mm * 3 x 13.4 tonnes lashing rings sunk into the ground on each side (1 x on the saddle platform, 1 x on the longitudinal beams after the bend and 1 x above the middle axle next to the longitudinal beam) * 3 x 13.4 tonnes lashing rings on each side on the outer frame (1 x start of the saddle platform bend, 1 x start of the ramp, 1 x end of the ramp) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to the outer frame of the wheel recesses (2 on the front and 1 on the rear wheel recesses) * extended excavator boom support from the end of the last rigid axle over the steering axle to the end support with internal reinforcement profile approx. W = 770 mm x D rear = 270 / depth front 170 mm, 2 x 6.4 ton lashing rings on each side in the excavator boom support * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transporting wheel loaders with a wheelbase of 3,000 - 3,590 mm with a tire diam

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform Rodpfol Thxdsx Ahzol * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corner load capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extension arms for a total width of 3m (not in the rear slope) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm rear ramp angle) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tank etc. painted in a shade of black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Total technical gross weight permissible: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 09/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * TPMS (Tire Pressure Monitoring System) * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle liftable Rodpfxjtplv Tj Ahzol * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye and height adjustment device * Tool box made of powder-coated steel sheet and spare wheel holder in basket design on the right side * Contour marking tape on sides and rear, reflective * Side underride protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically pluggable front stop angles in the track * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of containers, the front 4 skip stops are pluggable with swiveling stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and frictional securing of the skips * 4 cloverleaf lashing rails on each side and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld seam anti-slip coating in the running area of the drive-on slope * Mechanical drop-down support legs at the rear * 1 pair of aluminum drive-on ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * Tires: 235/75 R17.5 * Loaded ride height approx. 1003 mm * Payload: 18,900 kg * Technically permissible gross weight: 27,000 kg * Axles, slewing ring, drawbar, and air tanks painted in black * New vehicle without first registration, comes with manufacturer’s warranty * Errors and prior sale excepted * Available from week 50/2025

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * RDÜ (tire pressure monitoring system) Rodjpk D Iiopfx Ahzsl * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle liftable * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye & height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Contour marking tape, reflective on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with roll container recesses in turntable area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the guide rails * Load securing certificate according to DIN 30722-1 * Transport possible for up to 2 skip containers up to max. 10 m³ volume * Including 8 repositionable skip stoppers for lateral centering; front 4 skip stoppers plug-in with oscillating stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * Four cloverleaf-style lashing bars (side) and one pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the rolling path area of the approach ramp * Mechanical drop supports at the rear * 1 pair of aluminum drive-on ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Tires 235/75 R17.5 * Loaded height approx. 1,003 mm * Payload 18,900 kg * Technically permissible gross vehicle weight 27,000 kg * Axles, turntable, drawbar and air tanks painted in black * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Lifting center axle * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device * Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumpers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller depressions in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks * Load certificate according to DIN 30722-1 Rjdjpk D Awjpfx Ahzel * Transport of up to 2 skip containers with max. 10 m³ volume each possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking * 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical rear support legs * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires: 235/75 R17.5 * Laden ride height: approx. 1003 mm * Payload: 18,900 kg * Technical gross vehicle weight: up to 27,000 kg * Axles, turntable, drawbar, and air tank painted black * New vehicle without initial registration, covered by manufacturer's warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes Redpfx Ahsx Dp Atszol * Duomatic brake connector * 2 x SAF axles * Air suspension with lowering function via radio remote control * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height adjustment via actuating cylinder * Starting aid for shunting purposes and forced lowering on the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, additional cable for operation from the tractor) * 50 mm flanged bolt towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load * BPW landing gear at the front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing lights switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection lines for agricultural and forestry vehicles * Radio power supply 12+24 V via tail light * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-cut aluminum rims * Pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access step in front of the front wall on the left side * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection which can also be used as advertising space * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting hydraulic circuit for hydraulic tailgate (mounted on the right in driving direction), controlled via radio remote * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year of manufacture 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote * Radio remote with fast offloading function, but not for loading * Emergency stop switch on both left and right sides * Container mountings with 4 side supports each and 1 roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical rear support legs (drop-type) * Type approved for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Unladen loading height approx. 1,300 mm with lift axle lowered * Note: If the radio remote is outside the cradle, the service brake must be engaged in order to unlock the radio function. The brake connectors must remain connected at all times so the hydraulic/pneumatic control valves can be opened * Underrun guard monitoring system to ensure it is retracted during tipping * Chassis, drawbar, access step, underride guard, and support legs hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow * Subject to errors and prior sale * Vehicle is in very good / as-new condition * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection * 2 x SAF axles rated at 2 tons * Air suspension with lowering function via wireless remote control * First axle as a lift axle (fully automatic) * Lift axle ride height adjustable: +30 mm via adjustment cylinder * Start-assist for maneuvering and forced lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additional cable for tractor operation included) * 50 mm flanged drawbar eye – height-adjustable by +77 mm and -33 mm – for 2 ton vertical load * BPW front support winch * 15-pin electrical connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights controlled by reverse gear * EBS multi-voltage unit for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless system power supply 12+24 V via tail light * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic single mudguards (half-shell design) * Two-step access ahead of bulkhead, left side (facing direction of travel) * Shovel and broom holder mounted in front of bulkhead * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space * Dual-circuit hydraulic connections (engine side of truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) with operation via remote control * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed of high-strength fine-grain steel * 20,000 kg tractive force * Hook height: 1,570 mm * Hooklift operated via wireless remote control * Remote with fast function for lowering, not for lifting * Emergency stop switches on left and right sides * Container supports with 4 lateral mounts each side, plus 1 rear roller per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical fall supports at rear * Certified for 20 ton gross weight (2 x 9 ton axles) and 2 ton vertical load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the wireless remote is outside its cradle, the service brake must be activated to enable wireless function. Brake connections must remain permanently attached for the hydraulic/pneumatic valves to operate. * Underrun protection monitoring system to ensure retraction for tipping operations * Chassis, drawbar, access steps, underrun protection, and fall supports are hot-dip galvanized * Axles, air tanks, front support winch painted in black * Palfinger hooklift painted black/yellow * Subject to errors and prior sale * Vehicle is in very good / as-new condition * Vehicle is immediately available Rodex Dp Amopfx Ahzjl

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection * 2 x SAF axles * Air suspension with lowering function via remote control * 1st axle as lift axle (fully automatic) * Lift axle with ride height adjustment +30 mm via actuator * Start-up aid for maneuvering purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics – (without truck-side installation; includes cable for operation from the tractor) * 50 mm flange-mounted towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load * BPW landing gear at front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims Rsdpox Dp Agofx Ahzjl * Pin-type towing coupling (only for use when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the bulkhead on the left * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, mounted on the right side * Closed side protection usable as advertising space * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right) with operation via remote control * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg towing force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with quick function for tipping, but not for lifting * Emergency stop switches on both left and right sides * Container bearing with four lateral supports each side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the remote control is outside the charging cradle, the service brake must be applied for the remote control to be activated. Brake connections must remain connected to enable the operation of the hydraulic/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted when tipping * Chassis, drawbar, access step, underrun protection, and drop supports hot-dip galvanized * Axles, air tanks, landing gear at front painted black * Palfinger hooklift painted black/yellow * Errors and prior sale excepted * Vehicle is in very good / as-new condition * Vehicle is immediately available