Used Müller-Mitteltal Eal Trailers for sale (263)

Condition: new, maximum load weight: 6,000 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * NEW VEHICLE, not previously registered * Immediately available, special promotional offer at a special price for a limited time only! * Reference number for inquiries: 11555 * Tire pressure monitoring (TPMS) * EBS brake system, drum brakes, BPW axle, parabolic springs * Front landing gear; spring-assisted square tube rear supports with base plate, safety locking pins for variable support heights * Drawbar with 40 mm towing eye (height adjustable __ mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully enclosed steel fenders * Swivel cable drum frame * Steel drum axle, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset polyamide centering cones * For drum diameters Ø 800–3,000 mm x (1,700 mm width between the drum arms) * With locking mechanism to secure the drum on the support arm ends as well as a centrally positioned claw lock securing the cable drum frame to the chassis * Motor-hydraulically controlled push and pull cylinders with pipe fracture protection. Control valve with automatic neutral position, pressure relief valve and lowering throttle. Hydraulic connectors, hoses, and lines, NW 13. * Drum drive, motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable position). Hydraulic speed regulator and brake for the drum drive. * Additionally, hydraulic power unit with petrol engine and manual starter, 13 HP with gear pump (150 bar), pressure supply alternatively via truck hydraulics or separate pump unit by switching the feed lines * Alternative: Diesel engine with 6.5 HP, 150 bar instead of petrol engine * 2 LED work lights mounted on the sides of the trailer (suitable for 12V and 24V), switchable from the truck (vehicle-side installation required, wired on PIN 11) * Tool box approx. 500 x 350 x 400 mm * Chassis with galvanized drawbar * Advertising space integrated into the side guards, exterior finished in traffic white RAL 9016 (polyester coated) Hodpsx I T Ahsfx Ahzsg --- * We are an official Müller Mitteltal sales partner! * Example operating lease through our partner FM LeasingPartner: e.g. € 698 per month net, no down payment, and zero balloon payment after 60 months term. * Request your personal offer from us! * Trade-in of your vehicle is possible! --- * Our business hours: * Monday - Thursday: 8:00 am - 5:00 pm * Fridays: 8:00 am - 3:00 pm * Outside business hours by appointment * We speak German, English, Russian, Polish, French

Condition: used, empty load weight: 8,490 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2022, loading space length: 9,650 mm, suspension: air, tire size: 235/75 R17,5, Equipment: ABS, EBS Drum brake Color RAL 7046 telegrey Drum brake Cargo area width 2,550 mm / 3,000 mm Unladen weight 8,490 kg Gigant axles Hydraulic ramps + displacement Smartbord Lifting and lowering device front axle + rear axle Excavator bucket recess Hodpfx Aex Nn R Ashzog Errors excepted

Condition: used, Year of construction: 2013, Various containers for Müller-Mitteltal CHK: - 7 pcs. 4.5 - 5 m³, price per unit €1,000 - 3 pcs. 8 m³, price per unit €2,000 - 1 pc. 5.7 m³ with double-leaf rear door, price per unit €2,000 All containers are in operational condition. Year of manufacture: 2013 - 2015. = Further Information = Hsdpfxexb N A Ie Ahzeg Country of manufacture: DE Please contact Jan-Marc Schwickert for further details.

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hodex A Dvlspfx Ahzsg

Condition: used, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 02/2007, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Equipment: ABS, * ABS * Height-adjustable towing device * Front landing gear Hjdpfxsx I Tpus Ahzsg * BPW ECO-Plus axles * Rear support * 5-chamber tail lights * Duomatic air connection ----Body: 3-way steel tipper body for pallets, spring-assisted side boards left and right, extendable rear stanchion, lashing rings, sliding tarpaulin. Recess for aluminium loading ramps integrated in the chassis frame. Loading height approx. 1,000 mm Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE INCLUDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, proforma invoices, orders and sales discussions are subject to our General Terms and Conditions (see Legal Notice).

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Tool box made of galvanized sheet steel, mounted on the right-hand side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Rear, 2 mechanical, hot-dip galvanized folding support legs ----Tipper Platform: * Net hooks on the sides and rear in the central locking brackets, plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous drop sides without center stanchion, foldable, with drop side spring assist * Tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 flush-mounted, foldable 5 t lashing ring in each corner * Plus 4 flush-mounted, foldable 3 t lashing rings per side in the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the loading platform in the chassis at the rear ----Tires: * Tires: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Sideboard painted in RAL 9010 pure white * Painting of side panels in other RAL colors available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted Hedpfx Aoq Hg Dxshzsg ----Delivery time: * Immediately available from Egestorf

Condition: used, empty load weight: 7,180 kg, maximum load weight: 22,820 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 07/2026, loading space length: 9,000 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, insertable stakes, -- printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Hsdpfx Aex A Du Uehzjg

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Draw Eye: * Height-adjustable by 300 mm, hot-dip galvanized drawbar with 40 mm flange draw eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting * 15-pin power connector ----General Fittings: * Galvanized steel toolbox, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two rear mechanical, hot-dip galvanized drop-down supports ----Tipping Body: * Net hooks on the sides and rear in the central locking bearings, as well as 3 additional hooks on the outer front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper structure * Continuous sidewalls without center stanchion, fold-down with drop-side spring lifts * Tailgate foldable and pendulum-type, manually central-locked * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp guide rails for loading ramps ----Load Securing: * One foldable, recessed lashing ring (5 t) in each corner * Four foldable, recessed lashing rings (3 t each) integrated into the side outer frame ----Ramps: * 1 pair of aluminum access ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, recessed under the loading floor in the chassis, accessed from the rear ----Tires: * Tires 235/75 R 17.5 ----Paint: * Axles, springs, air tanks, drawbar, and landing gear painted black * Sideboard painted RAL 9010 pure white * Sidewalls can be painted in any RAL color upon request (additional cost) * Floor and front wall hot-dip galvanized ----Info: Hsdpsv Dz N Asfx Ahzjg * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Availability: * Available immediately ex works Egestorf

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Hodox A Dkcepfx Ahzsg

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline ----Brakes: Hedpfx Ajq Euagehzsg * Wabco EBS * Emergency release unit for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on right-hand side * Two-step entry on front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear in the central locking bearings, plus 2 hooks on the front wall * Steel pallet 3-way tipper body (continuous sidewalls - no central stanchions - foldable with drop-side assist spring, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear track for loading ramps ----Load Securing: * One 5 t lashing point in each corner * Four 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (carrying capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at rear, mounted under the load bed within the chassis ----Tyres: * 385/55 R 19.5 ----Coating: * Hot-dip galvanized chassis, drawbar, tipper body, front wall, drop sides, folding supports and rear stanchions * Springs, air tanks, flange towing eye, and landing gear painted black * Drop sides hot-dip galvanized ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization aggregate ----Drawbar / Coupling Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange coupling eye ----Electrics / Lighting: * RDÜ Tyre Pressure Monitoring System * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at the front * 2 mechanical folding supports at the rear * Right-side plastic tool box * Two-step entry on the front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear in the central locking bearings and 2 at the front wall * Steel pallet three-way tipper body (continuous side walls - without intermediate stanchions - foldable with board-side spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear ramp holder rail ----Load Security: * Each corner equipped with 1 x 5 t lashing ring Hsdsl Thw Iepfx Ahzjg * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear of the chassis, under the loading platform ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, side panels, folding supports, and rear stanchions hot-dip galvanized. Axles, springs, air tanks, flange coupling eye, and landing gear painted in black. Side panels hot-dip galvanized. ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) Hedpfx Ahjx Ipbtjzeg * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system Hodpfxox Ipb Hj Ahzog * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle Hedpfx Aox Ipbgohzeg * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Hodpsxf Sk Nofx Ahzog ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection Hedpfx Aoxf Skpshzeg * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye Hedpoxf Sk Ajfx Ahzjg ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RAK 18.0 External Roller with Rear Tipping Function ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when uncoupling the brake) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye; height adjustment via tension spring & turnbuckle ----General Accessories: * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the right side * Enclosed plastic mudguards, front and rear * Enclosed lateral underrun protection * Rear-mounted bolted underrun protection * Storage box for container nets, made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable rear A-sign * Rear impact protection buffers ----Electrical / Lighting: * EBS multi-voltage system, suitable for towing vehicles with 12 & 24V electrical system * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire monitoring system ----Suitable for Container Lengths: * For containers from 6,500 mm to 7,000 mm ----Container Running Surface / Tipping Bridge: * External roller guidance with flat steel rail, clear width approx. 2,180 mm, combined with 3 centering pieces on each side for container positioning * For receiving and securing container rollers, two recessed roller bearings are mounted at the rear, connected to the tipping frame, with pneumatically operated locking to prevent longitudinal movement * Positive locking of the roll-off containers by a pneumatically operated cross clamping unit integrated in the front of the tipping frame, operable from outside (single-sided operation) * Chassis frame with rear-tipping main frame – single-tube design hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun and locking components (without topcoat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle, without initial registration, covered by manufacturer's warranty * Errors and prior sale excepted Hodpfx Aex Ipbmehzeg * Sample images (vehicle depicted may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping Hedjxf Skvepfx Ahzog * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * 4 stake pockets per side (no stakes present), can also be used as lashing points * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t. * 6 pairs mechanical folding outriggers for 3 m overall width (not included in the rear slope) * Widening planks stored in the center of the loading area * Dipper stick tray over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the dipper stick tray) * Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Hjdpfx Aex Ipa Njhzjg * --Technically permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 12/2026 * Sample image

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 'Masterline' ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * Two mechanical, hot-dip galvanized rear folding support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * RDÜ tire pressure monitoring system ----Tipper Body: * Net hooks on sides and rear in the central locking bearings as well as 2 on the front wall * Steel pallet 3-way tipper body (continuous side walls, without center posts), foldable with drop side spring assistors * Rear corner posts bolted * Combination rear steel swing doors, double-leaf, asymmetrically split, can be swung and locked at 270° (not foldable), plus additional swinging frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock and central locking system Hedpjl Thyxjfx Ahzog * Deactivation function for the automatic tailgate feature when reversing with an open swing door * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes in the outer frame on each side ----Ramps: * 1 pair aluminum drive-on ramps, approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, mounted under the load area, integrated into the chassis ----Painting: * Drawbar, front wall, tipper body, rear posts, underrun protection, and mechanical support legs, hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall paint finish in a RAL color of your choice available at extra cost * Axles, springs, flange towing eye, air tank, and landing leg painted in black ----Additional Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline" Hjdpfjl Thymox Ahzjg ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye ----General Attachments: * Jost mechanical support winch at front * Two mechanical, hot-dip galvanized folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underride guard * Plastic quarter fenders ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Bed: * Net hooks on the sides and rear, fitted to the central locking bearings, plus 2 on the front bulkhead * Steel pallet 3-way tipper body (continuous sidewalls - without center stanchions - foldable with drop-side spring assist) * Rear stanchions bolted * Steel combination swing doors at the rear, asymmetrically split, 2-leaf, can be swung and locked to 270°, not foldable – also equipped with additional swinging frame for automatic tailgate opening during tipping. Locking via galvanized rotary bar lock and central locking system * Deactivation function for automatic tailgate during rear tipping with open swing door * 4 mm steel floor plate * Mounting rails at the rear for loading ramps ----Load Securing: * One 5 ton lashing point in each corner * Four 3 ton lashing rings recessed into the outer frame on each side ----Ramps: * One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the load area, inset into the chassis, accessible from the rear ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underride guard, mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Other RAL shades for sidewalls available at extra cost * Axles, springs, towing eye, air tanks, and support winch painted black ----Other Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 13,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal (without truck-side installation) * 2 x 9 t Gigant axles * Air suspension with leveling during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform at the front wall * Manual sliding tarpaulin * 15-pin power plug * LED tail lights with galvanized protective cover * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM-profile – continuous, without central stanchion – swingable via manual central locking and left side folding panel with sidewall spring lifter) * Rolling tarpaulin similar to RAL 7038 agate grey with tensioning by side tension ratchets and tension cords at front and rear * Front wall platform made of grating with step at the drawbar and one handrail at the front wall * Rear wall – made of HBW 400 steel – swingable via automatic 2-claw locking * 5 mm steel floor made from HBW 450 steel * Four 3 t recessed and foldable lashing rings per side – embedded in the steel floor * Reinforced and certified superstructure as per EN 12642 XL including load securing certificate up to 19 t * Tipper body and side walls in RAL 9010 pure white * Painting of side panels in RAL 9010 pure white * Painting of side panels in a RAL color of choice available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty Hjdpfxjxl Nkgj Ahzjg * Errors and prior sale excepted * Available from KW 11/2026 * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, RAK 18.0 Outer-Roller with Rear Tipping Function ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatically lowers when the brake is disconnected) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox, approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axle * Enclosed lateral underrun protection * Bolt-on rear underrun protection * Storage box for container nets, made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable "A-sign" at rear * Rear collision protection buffer ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical system * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system Hjdpfx Ajx Ipa Aehzog ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm in length ----Container Running Surface / Tipping Platform: * External roller guidance via flat steel limitation with a clear width of approx. 2,180 mm, paired with three lateral centering pieces on each side for container guidance * At the rear, two recessed, tipping frame-integrated roller bearings with pneumatic longitudinal anti-slip locks are installed to hold and stop container rollers * Positive locking of roll-off containers via a pneumatically operated cross-clamping unit (single-side operation) installed at the front end of the tipping frame and operable from the outside * Chassis frame with rearward-tipping main frame – single-tube, engine-hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are pushed on from the front; hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Approx. 1,270 mm unladen ----Finish: * Rear underrun protection and locking components (without topcoat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black shade * Hot-dip galvanized ----Information: * For container transport per DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Sample images (actual vehicle may differ due to special equipment) ----Delivery Time: * Available from CW 24/2026 (calendar week)

Condition: new, maximum load weight: 10,980 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brake: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange-eye: * Drawbar adjustable in height by 300 mm (drawbar extension by 250 mm up to 2,250 mm) * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * 15-pin electrical connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at the rear ----General attachments: * Support winch at the front * Externally mounted galvanized foldable supports at the rear * Plastic toolbox approximately 858 x 500 x 500 mm mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader platform: * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Side panels made of trapezoidal-profiled sheet steel, foldable with drop-side spring assist * Rear wall made of steel, slidable between the ramps (mounting bracket for stowing in front of the bulkhead when not in use) * Bolted rear stanchions * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber covering strip on the inside of the drive-up ramps * On the approach slope as well as on the outside of the low-loader platform (from bulkhead to rear end beam) 12 mm thick and 210 mm wide rubber covering strips ----Load securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets possible every 600 mm * In the corners front and rear, each with 1 x 6.3 t lashing ring * Various holes in the front and rear end beams for 1.2 t lashing options Hsdpfex Ipbaex Ahzeg ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for one-man operation approx. 2,750 x 870 mm (collapsible down to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in a shade of black * Side panels painted in RAL 9010 pure white ----Info: * -- Reinforced and certified body according to EN 12642 XL including load securing certificate -- * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Sample photos (pictures of the vehicle may vary due to special equipment) ----Delivery time: Vehicle available from week 10/2026