Lowbed semitrailer for transportation of construction machinery

Faymonville 4-1+3-A-Semi-Twinaxle II-Rampen-MultiMAX

Gooseneck:
• Gooseneck in SNT design for optimizing load platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10°
• Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4

Load Platform:
• Extendable load platform, approx. 8,800 mm long with rear chamfer of approx. 500 mm x 10°
• Recess in the load platform and chamfer area for receiving excavator dipper stick, approx. 3,950 x 580 x 370/450 mm

Ramps:
• Pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
• Hydraulic foldable ramp ends
• Ramps can be hydraulically moved individually by approx. 235 mm outward and approx. 215 mm inward
• Hardwood covering on the chamfered section of the load platform
• Ramps with hardwood covering
• 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the ramp

Axles and Tyres:
• TWINAXLE-II independent suspension with BPW axle stub, 1st axle steering, all other axles forced steered via hydromechanical system
• 1st axle with electro-magnetic reverse lock, activated automatically in reverse gear or manually
• Technical axle load: 12,000 kg
• Hydraulic axle compensation, hydraulic cylinders with shut-off valves
• Tyres: 245/70 R 17.5
• TPMS tyre pressure monitoring system according to ECE R 141

Accessories included:
• Detachable steel front wall, approx. 400 mm high
• 4 wheel chocks with holders
• Yellow-red air couplings on the front connection strip
• 3 kW electro-hydraulic power pack for operation of hydraulic functions, except hydraulic winches
• 1 spare wheel
• 2 pairs of screw-in lashing rings
Redervw U Sspfx Afwew
• 1 pair of horizontal lashing rings at the rear of the gooseneck
• On the gooseneck: 1 pair removable ALU side boards, approx. 400 mm high, anodized
• On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized
• Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering over the king pin
• 3.5" king pin
• Gooseneck guide plate for fifth wheel, approx. 500 mm wide
• Load platform locking with conically welded locking profiles every 250 mm
• Includes pre-tensioning plate
• 1 pair of lashing rings on the front cross member
• 8 pairs of recessed, fold-out lashing rings in the outer frame of the load platform
• Extendable (galvanized) outriggers, approx. 230 mm each side
• 1 pair of built-in open wheel recesses to the extension, approx. 700 x 410 mm, in the load platform in front of the 1st axle
• Wheel recesses with steel plating and 15 x 15 mm square climbing bars, approx. every 200 mm
• 1 pair of built-in wheel recesses, approx. 1,480 x 700 x 410 mm, in the load platform between the 1st and 2nd axles
• Wheel recesses with 15 x 15 mm square climbing bars and extensions in the lower area
• ALU covers for the wheel recesses between the 1st and 2nd axles, usable as widening planks
• 1 pair of mechanical rear supports
• 20 x 30 mm square climbing bars, spaced approx. every 200 mm on the outer frame of the chamfered load platform
• Central lubrication system with 1 pump, brand BEKAMAX, for standard grease as per NLGI-2
• Radio and cable remote control, with 2 indicator lights on the receiver for single-track control
• WABCO Smart Board System
• Smart Board equipped with odometer
• 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 marker lights and holders for beacon

The listing was translated automatically. Translation errors are possible.