Used Fliegl Semitrailers for sale (334)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake Hfjdpfx Asi Rixkofxon 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, maximum load weight: 21,400 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 06/2013, Equipment: ABS,

Condition: new, functionality: fully functional, empty load weight: 5,380 kg, maximum load weight: 33,620 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, tire size: 22,5, tire condition: 90 %, trailer brake: trailer braked, Year of construction: 2026, Equipment: ABS, versatile use as a container chassis for 20 ft/22.5 ft and 30 ft containers - a total of 3 units available - all manufactured in 2026; one of them is registered, the other two are not yet registered. Hfodpozzx S Eefx Afxon

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Hfjdszlcdgspfx Afxjn Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, empty load weight: 3,140 kg, maximum load weight: 14,860 kg, overall weight: 18,000 kg, first registration: 07/2022, total width: 2,550 mm, Equipment: ABS, EBS, electronic stability program (ESP), Key Features Internal Reference: 25317M Chassis Number: WFD FLT 218 Serial Number: 413.869.006 Vehicle Model: TWP 180 BDF / Swiss-Vehicle Vehicle Brand: Fliegl Product Category: Interchangeable Chassis Condition: Used Date of First Registration: 07/08/2022 Last Roadworthiness Test (MFK or TÜV): 05/12/2023 Suspension: Air-Air Cab Vehicle Equipment: ABS, EBS, ESP Axles & Tires Axle 1: 385 / 55 R 22.5/14mm, Air Suspension Axle 2: 385 / 55 R 22.5/11mm, Disc Brakes, Air Suspension Number of Axles: 2 Hedpfxjz Hp S Ro Afxsfn Weights & Dimensions Total Weight: 18000 Payload: 14860 Unladen Weight: 3140 Vehicle Width: 2550 Body Body Model: BDF Body Year of Manufacture: 2022

Condition: new, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Vehicle / Body: Low loader semitrailer First registration: New vehicle Gesamtgewicht: 35.000kg/47.000kg Unladen weight: 8,900kg Payload: 26,100kg/38,100kg Overall length: 13,300mm Loading length: 9,200mm Width: 2,520mm Loading height: 900mm Hodpjut Idnofx Afxofn Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2" kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3,000 mm Excavator trough above the rear axles starting to the rear, approx. 3,000 mm long, approx. 650 mm wide and approx. 230 mm deep, 2 pairs of lashing holes, 5 tons each, in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope Low loader lashing eyes 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the flatbed 2 pairs of lashing eyes at the front on the gooseneck, 5 tons each 3 pairs of swivel lashing eyes on the gooseneck, 5 tons each 2 pairs of additional hinged lashing eyes recessed into the flatbed, 10 tons each 1 x at the start of the low loading area 1 x at the end of the rear slope 1 pair preparation on incline of gooseneck for 6.7 to. screw lashing eye (JDT) 8 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (can be converted to stake pockets) 1 pair of screw lashing eyes, 6.7 tons each (JDT), with large flange plate incl. thread as counterholder Axles + suspension SAF or BPW drum brake axles, manufacturer's choice "Axle/chassis laser-measured" Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension Wheels and tires 235 / 75 R 17,5" at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored cable routing for easy servicing. Spring-applied parking brake 24 volt EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS guaranteed! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly truck must be prepared accordingly, no truck installation (no calibrated scales) Vehicle - driving stability system Tire pressure monitoring system according to ECE R 141, indication via display in towing vehicle, via EBS, without truck installed (prerequisite for this must be provided in the truck) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED ligh

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar Hsdpfx Ajzggicefxjfn * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) Hfjdszmub Hopfx Afxjn #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled).

Condition: used, maximum load weight: 8,375 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/2011, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, Flatbed with side sliding curtains, sliding tarpaulin cover, double-wing door with rotating rod locking mechanism at the rear, aluminum sideboards 500 mm high, screen-printed floor, lashing points, spare wheel holder under the body, SAF axle(s), drum brake system, air suspension with lifting and lowering mechanism, the vehicle can be fitted with advertising or lettering. Hfedozc Tipepfx Afxsn SI87036 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be fitted with advertising or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this vehicle. Please contact us!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,900 kg, maximum load weight: 18,100 kg, overall weight: 20,000 kg, axle configuration: 1 axle, total length: 7,650 mm, total width: 2,550 mm, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins, 2 pairs of removable guide rollers 4 container locks with sturdy arms based on a 20-standard for 7.45- and 7.82-swap bodies 24-metric-ton, 2-speed support jack, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-splash flaps *Axle + Suspension Hfsdpfx Afoi Rixnexjn Disc brake axle, with 430 mm disc diameter, Air suspension with lift & lower valve, with hold function for lift & lower *Wheels and Tires 385/65 R 22.5 Steel rims, factory silver *Braking system 2-line compressed air braking system Spring-loaded parking brake 2 reverse-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in the front, without connecting cables *Registration / Plates Country of registration: Germany With DEKRA inspection and certification (per §13 EG - FGV) Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Warning sign per ECE - 70 *Paint Finish Frame: Hot-dip galvanized or painted per customer request Support feet: Black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Hsdpozmtc Aefx Afxsfn Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: good (used), Year of construction: 2018, Semi-trailer, Fliegl, for external filling only, 3-axle Tire size: 365/65R22.5 = Further information = Technical condition: good Optical condition: good Hodjz Nrdcopfx Afxefn Please contact Ria Lange for further information.

Condition: good (used), functionality: fully functional, machine/vehicle number: WFDFJT21801002273, empty load weight: 3,600 kg, overall weight: 18,000 kg, first registration: 10/2026, next inspection (TÜV): 10/2027, Year of construction: 2026, We are offering a Fliegl tandem truck trailer with a permissible gross vehicle weight of 18 tons for sale. The trailer impresses with its particularly low tare weight of only 3,600 kg, offering an extremely high payload of approximately 14,400 kg. It is an open platform trailer without a tarpaulin, ideal for the transport of building materials, machinery, pallets, and other heavy goods. TECHNICAL DATA AND EQUIPMENT: Manufacturer: Fliegl Year of manufacture: May 2012 Permissible gross vehicle weight: 18,000 kg Tare weight: only 3,600 kg Payload: approx. 14,400 kg Axles: Tandem axle Suspension: Air suspension Lift axle: available Body: Open loading area without tarpaulin Tires: All tires are NEW TÜV (German technical inspection): Recently renewed Special feature: Device for carrying a forklift CONDITION AND SALE The trailer is ready for immediate use. All tires have been replaced, and the main inspection has also been recently carried out. Hjdpfx Asz Nxm Djfxofn Due to its low tare weight, the trailer is particularly suitable for transports where a high payload is crucial. The trailer is being sold solely because we no longer need it in our operations. PRICE AND LOCATION Asking price: 12,000 € net, negotiable Location: 28816 Stuhr near Bremen Collection in Stuhr or delivery by us is possible by arrangement. An inspection is possible at any time by prior appointment. If you are interested, we look forward to hearing from you or receiving your call.

Condition: used, maximum load weight: 6,740 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 10/2025, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Internal number: 3372 ----Phone & WhatsApp: ----Fliegl TKF 118 tandem trailer, SDAH tarpaulin and side rails, sliding curtain, rear portal doors, permissible gross weight: 10,000 kg, technically possible: 11,800 kg, payload: 6,740 kg / 8,540 kg. First owner. TÜV (technical inspection): 10/2025. ----ABS/EBS, air suspension, height-adjustable drawbar, tires: 235/75 R17.5, tire condition: 20-30%, Duomatic coupling, rear portal doors, aluminum outriggers, loading height approx. 850 mm. Hfedpoz Hzpuefx Afxjn ---- * We sell exclusively subject to our General Terms and Conditions. * We assume no liability for errors in the vehicle description. * The vehicle may be covered with or have advertising affixed. * We sell used spare parts for DB and MAN, such as engines, transmissions, axles, cabs, and bodies. Cranes, hooklifts, etc. For detailed information, please contact us by phone or at:

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid Hodpfx Afjwhfiyexofn * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Hedpfxezl Ez Uj Afxjfn Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 04/2027, loading space length: 12 mm, The Aufliger is in very good condition. Hedpfx Aezqi Agofxefn

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Hodpfx Afjz R Nlusxjfn

Condition: used, maximum load weight: 14,310 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, next inspection (TÜV): 01/2027, loading space length: 6,934 mm, loading space width: 2,486 mm, loading space height: 800 mm, total length: 8,750 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Wooden floor with rail system * Folding side walls * Fixed front wall * Air suspension * Storage boxes * SAF axles with drum brakes * Wabco Trailer EBS-E -----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg Hfodpfxsztihuo Afxjn * Tare weight: 3,690 kg * Overall length: 8,900 * Next inspection due: 07/2026 ----Vehicle number/Vehicle: 12370----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, salvage and vehicle transport.----?YOUR VTS TEAM

Condition: used, maximum load weight: 8,470 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 06/2018, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,800 kg Unladen weight: 3,330 kg Payload: 8,470 kg Overall length: 6,950 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,420 mm Loading height: approx. 950 mm Further information: - Front support leg - Rear support, foldable - 450 mm drop sides - Large lashing package - Frame hot-dip galvanized incl. passivation - Loading ramps optional: €1,280.00 Hjdpfx Aey Arkaofxsfn

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801011727, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 3 axles, first registration: 01/2022, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", color: silver, Tandem swap body trailer type TWP 180 Mega-EL Caution: images are stock/archive photos. The vehicle may be in use. #Weights and dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Kingpin/support load: 1000 kg - Unladen weight (base version) only approx.: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in driving position approx.: 1070 mm - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking unit approx.: 985 mm - Locking unit spacing: 5853 mm Hfedpfozwlciex Afxen - Coupling eye height approx.: 380 mm - Drawbar length set from stop, 7820 mm swap body, approx.: 2200 mm - Parking heights apply on level ground #Chassis - swap body centre-axle trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twistlocks with reinforced brackets on 20" base for swap bodies 7.15 / 7.45 and 7.82 - 1 pair geared landing legs front, straight foot, one-side operation on RHS - 1 pair geared landing legs rear, straight foot, one-side operation on RHS - 2 wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection - Half-shell mudguards - Mudflaps #Coupling assembly - centre-axle trailer - Drawbar with certified 50 mm coupling eye, haulage version (not suitable for trucks with tail lift) - Underslung drawbar coupling, free drawbar length approx. 2200 mm - Brake/electrical connection plate on drawbar, all lines to towing vehicle as coiled cables #Axles and suspension - SAF disc brake axles - Laser-aligned axles/chassis, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Colour-coded line routing for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 mismatch-proof coupling heads front, with lines to towing vehicle, RHS connection - EBS electronic braking system with EBS connector front, with cable, RHS connection - Caution: only to be towed by vehicles with effective ABS - Raise-and-lower valve with hold function in lowered/raised position #Wheels and tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24V multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin mismatch-proof connectors front, with cable, RHS connection - 2 additional LED work lights, flush-mounted at rear, activated via reverse light #Country of registration / plates - Germany - Dekra inspection and certificate per §13 EC-FGV - 24/7 service hotline - prepared for single-line number plate holder - Contour marking with reflective tape to ECE R048, white sides, red rear #Paintwork - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation Caution: stock photos!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each Hfsdpfx Ajyxq A Hefxsn 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, axle configuration: 2 axles, first registration: 06/2019, color: other, Year of construction: 2019, Please contact us for more information. Hfodpfezvdnhex Afxon

Condition: used, axle configuration: 2 axles, first registration: 12/2019, color: other, Year of construction: 2019, Please contact us for more information. Hfedpozvdnnofx Afxon

Condition: new, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, NEW VEHICLE: Fliegl 3-axle, low-loader semi-trailer with ramps Type SDS 470 T Total weight: 41,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall length: 13,300 mm Loading platform length: 9,200 mm Ramps: 3,000 mm x 750 mm with hydraulic actuation Air suspension with lift and lower valve Excavator arm recess Large lashing kit Wooden floor, 70 mm Hfedpfx Aok N Afljfxen SAF axles, axle 3 as a trailing steering axle Lease-purchase offer: Term 48 months, 40% residual value, down payment only the VAT. Monthly rate: EUR 999.00 (payable net only)