Used Fliegl Semitrailers for sale (336)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: Guodpfxoi Ri Exe Ah Hsh 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm Guodpsk E Tdaefx Ah Hsh BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: used, axle configuration: 2 axles, first registration: 06/2019, color: other, Year of construction: 2019, Please contact us for more information. Gsdpfezvdnhjx Ah Hjuh

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Godpfx Ahjz R Nmfo Hjuh

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 10/2011, loading space length: 12,450 mm, loading space width: 2,470 mm, loading space height: 2,280 mm, total length: 12,550 mm, total width: 2,550 mm, suspension: air, wheelbase: 8,770 mm, color: red, Year of construction: 2011, Axle configuration Make axles: BPW Rear axle 1: Lift axle; Max. axle load: 10000 kg; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: air suspension Rear axle 2: Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Weights Gedjvpvygepfx Ah Hjuh Empty weight: 6.200 kg Carrying capacity: 28.800 kg GVW: 35.000 kg Functional Wall thickness: 7 mm Condition Technical condition: good Visual appearance: good Identification Registration number: OL-52-LX

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21201012165, empty load weight: 2,290 kg, maximum load weight: 9,510 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 910 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Equipment: ABS, - Please note: stock photos! #Chassis – Centre-axle Trailer - Fine-grain steel welded construction - 6 pairs of lashing rings, bolted externally into the floor/outer frame, 5 t each - 2 additional pairs of lashing rings bolted into the floor at the corners, 5 t each - Geared landing leg, front - Folding rear support - 2 wheel chocks with holder - Galvanised steel underrun protection - Rear mudflap, full width (not compatible with forklift pocket mounting) - Quarter-shell mudguards - 1 plastic toolbox with removable tray, W=620/H=360/D=440 mm, lockable with a padlock (lock not included) - 1 row of lashing/stake rails recessed centrally along the floor (from the end of the front cross-member to the start of the rear cross-member), approx. 100 mm high, with 20 mm round steel bars top and bottom, approx. 60 mm apart, closed at the bottom with an angle plate, open on the lower half; for lashing and inserting 80 x 80 mm stakes - Hook-in rail for aluminium ramps at the rear - 1 storage compartment for loading ramps, for ramps 3000 x 360 mm - Centre-axle trailer coupling gear - Drawbar with approved 40 mm towing eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles + Suspension - BPW drum-brake axles, axle spacing approx. 990 mm - Laser-measured axle/chassis alignment – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensation) #Wheels and Tyres - 235/75 R 17.5" - manufacturer's choice - Steel wheels, factory silver #Braking System Guedpfjz Akl Tox Ah Hjh - 2-line air braking system - Spring-loaded parking brake - Integral air reservoir - 2 mismatch-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS connector at the front, with connecting cable #Electrics - 24 volt, multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red outline marker lights at the rear - 1 x 15-pin connector at the front, with connecting cable #Floor - Steel/chequer-plate floor for high point-load capacity - Film-faced plywood panels, approx. 30 mm thick, for high point-load capacity, bolted-on version - Note: slight floor undulation possible due to weld distortion - Bed length approx. 5,200 mm #Country of Registration/Plates - Country of registration: Germany - with DEKRA inspection and certification (in accordance with §13 EC-FGV) - Down-rated to a permissible gross weight of 9,900 kg – exempts from the six-monthly safety inspection (SP), with correspondingly reduced payload - 24/7 service hotline - prepared for a single-row number plate holder - Contour marking with reflective tape to ECE R048, white on the sides and red at the rear #Paint Finish - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation - Note: floor undulation possible due to hot-dip galvanising - Please note: stock photos!

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 04/2027, loading space length: 12 mm, The Aufliger is in very good condition. Gsdezqi Agopfx Ah Hsuh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light Gedszfp S Depfx Ah Hjuh LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: used, empty load weight: 8,200 kg, maximum load weight: 30,000 kg, first registration: 08/2009, tire size: 215/75/17,5, Year of construction: 2009, Internal No. 0002 Viewing strictly by prior appointment only - MOT valid until 12/27 - 40 km/h approval - 80 km/h possible - New air reservoir - New air bellows - New shock absorbers Suspension: • 1st axle: Air suspension • 2nd axle: Air suspension • 3rd axle: Air suspension • 4th axle: Air suspension Gusdpfoyy Th Ujx Ah Hsh Brakes: • 1st axle: Drum brakes • 2nd axle: Drum brakes • 3rd axle: Drum brakes with spring-actuated parking brake • 4th axle: Drum brakes with spring-actuated parking brake Tyres: • 1st axle: Twin tyres • 2nd axle: Twin tyres • 3rd axle: Twin tyres • 4th axle: Twin tyres • Tyre size: 215/75/17.5 • Tread depth: 50% • Rim type: Steel Additional equipment: • Unladen weight: 8,180 kg • Payload: 21,820 kg • Loading area: 20.53 m² • Loading volume: 61.58 m³ • ABS • EBS • Lifting roof • Number of axles: 4 • Axle manufacturer: BPW • Spare wheel holder including spare wheel • Hydraulic loading ramps Internal cargo space dimensions (approx.): • Length: 8,050 mm • Width: 2,550 mm • Height: 3,000 mm Sale subject to prior sale, errors, and omissions excepted.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, semi-trailer container - Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions - Front locking on tipping ram mounting bracket with guide wedges on both sides, rear locking on continuous twist-lock shaft with return spring - Without subframe, for self-supporting containers - Container mounts: locking crossmember, twin-point for locking 1 x 30 ft container - 24 t 2-speed landing legs, single-side operation, with straight foot, without slide compensation - Clear landing leg corner dimension / rear swivel clearance approx. 1850 mm - 2 wheel chocks with holder - Aluminium side underrun protection - without rear underrun protection - Half-shell mudguards - with anti-spray mudflaps to EC standard #Hydraulics - Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Caution! Tipping angle limited! - Hydraulic actuation via truck PTO - Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut #Axles + Suspension - BPW disc brake axles with 430 mm disc diameter Gedpfxozy N Hkj Ah Hjuh - "Laser-aligned axles/chassis", reducing tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross train weight - Air suspension - 1st axle automatic lift axle, including forced lowering and traction assist, activated by "3x braking" (traction assist functions up to an axle load excess of 30% and up to a speed of max. 25 km/h) #Braking system - Two-line compressed-air braking system - Colour-coded line routing for easy servicing. - Spring-loaded parking brake - 2 mismatch-proof coupling heads at the front, without connecting line - 24 V EBS electronic braking system with EBS socket at the front, without connecting cable - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - with raise & lower valve - Vehicle driving stability system - Axle load detection via EBS CAN bus signal, for display on the cab monitor; the truck must be pre-fitted accordingly, no installation on the truck included (not a calibrated weighing system) #Wheels and tyres - 385/55 R22.5" make at the manufacturer's discretion - Steel rims, factory silver #Electrics - 24 V multi-chamber lights, yellow LED side lighting - 2 white LED position lights at the front - 2 white/red outline marker lights at the rear - 2 x 7-pin mismatch-proof sockets at the front, without connecting cable #Country of registration / Plates - Type approval to EC 2007/46 - 24/7 service hotline - prepared for single-line number plate holder - Contour marking with reflective strips to ECE R048, white on the sides and red at the rear #Paintwork - Frame: RAL colour of choice - "10-year warranty against corrosion perforation" - Landing legs: black coated

Condition: used, maximum load weight: 8,470 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 06/2018, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,800 kg Unladen weight: 3,330 kg Payload: 8,470 kg Overall length: 6,950 mm Loading length: 5,000 mm Gujdey Arkaepfx Ah Hjh Width: 2,550 mm / loading width approx. 2,420 mm Loading height: approx. 950 mm Further information: - Front support leg - Rear support, foldable - 450 mm drop sides - Large lashing package - Frame hot-dip galvanized incl. passivation - Loading ramps optional: €1,280.00

Condition: new, maximum load weight: 25,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 950 mm, total width: 2,550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21.00 m Loading length: Loading area approx. 13,500 mm / Maximum loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: New vehicle from current production, pre-series model. Rear support, telescopic 4 outrigger pads with holder 4 pairs of container locks, recessed in the floor for 1 x 40 ft container or 2 x 20 ft container 1 spare wheel holder for 1 spare wheel, with wheel fastening kit, in chassis design 11 pairs of stake pockets recessed in the outer frame, suitable for FR insert stakes 80x50 mm, flush-mounted in the outer frame, with opening for lashing strap or chain attachment 20 stake pockets, B=80 / T=50 / L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each with 3.5 tons capacity, mounted in the side frame - in the neck area 13 pairs of folding lashing rings, each with 10,000 daN, freely pivotable and suspended in the side frame profile (also suitable for overwidth lashing). 1 pair of folding lashing rings, each with 10,000 daN, mounted laterally in an intermediate support Air suspension with lifting and lowering function 1st axle automatic lift axle, additionally with forced lowering including starting aid with control button on the semi-trailer, without driver's cab operation with lifting & lowering valve + auto-reset function Guodpsumha Njfx Ah Hoh Wheels and tires 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light 1 rotating beacon, removable, on the underrun protection 1 x 7-pin socket at the rear 6 side sockets, 2x front panel, 2x support legs, 2x rear end (left + right) 7-pin 2 work lights, sunk into the front wall, including switch 2 pairs of overwidth panels, each with 2 LED outline lights per panel, extendable to the side to 3,500 mm, panels can also be mounted on the loading area (width adjustment stepless) Fixed steel front wall, 1,200 mm high, with sturdy steel corner posts without corner bevel, straight side indentation. 2 lashing holes at the top inside and outside in the front wall corners Frame front hot-dip galvanized + outer frame visible area final coated in RAL 3002 carmine red Frame rear hot-dip galvanized + outer frame visible area final coated in RAL 3002 carmine red Front wall RAL 3002 carmine red

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, total length: 5,200 mm, total width: 2,550 mm, tire size: 285/70 R19,5", color: grey, 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! Conversion to CLG dolly in progress – some units already completed. Please note: The photos shown are archive images and may differ from the actual vehicle. # Chassis Guedpjzm Trqsfx Ah Hsh Heavy-duty fine-grain steel welded construction Fifth wheel coupling (manufacturer of our choice) for 2" kingpin with ball-bearing turntable, steering angle max. 20° Telescopic landing leg 2 wheel chocks with holders Steel rear underrun protection Half-shell mudguards CLG drawbar with certified 50 mm towing eyes for connection to both the dolly and the towing truck. # Axles + Suspension BPW disc brake axles Air suspension with raise/lower valve # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at the front with connecting lines to the towing vehicle 2 non-interchangeable air couplings for the semi-trailer Electronic Braking System (EBS) with front EBS connector and connecting cable EBS connection cable for the semi-trailer Axle load detection for the truck via EBS Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white LED front position lights 2 white/red LED rear outline marker lights 1 × 15-pin connector with cable to the towing vehicle 1 × 15-pin connector with cable to the semi-trailer # Registration Prepared for registration in Germany DEKRA approval included Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Dimensions Fifth wheel height: approx. 1,150 mm Drawbar coupling height: approx. 380 mm Archive photos – actual vehicle may vary.

Condition: used, first registration: 06/2018, Year of construction: 2018, Fliegl ZWP 180 ZWP 2-axle platform trailer ∗AS NEW∗ ! 4 units available ! ● First registered: 06/2018 ● Vehicle dimensions: 9,150 mm x 2,480 mm (L x W) ● Fully air-suspended ● Lifting/lowering system ● ABS ● 2 x air-suspended BPW axles, 9 tons each ● GVWR: 18,000 kg ● Unladen weight: 2,610 kg ● Payload: 15,390 kg ● Tire size front/rear: 385/65 R22.5 ● Tread depth: 8/8 / 7/7 mm - German vehicles! - 1st owner! - MOT / inspection: upon request and possibly with an extra charge: new!! Errors and prior sale excepted! = Further information = Gedpfx Ahezlwpdj Houh Unladen weight: 2,610 kg Payload: 15,390 kg GVWR: 18,000 kg

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Guedpfx Ahjzl D Iye Hoh Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification Godpszldqhofx Ah Heuh 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS Guodpfx Ahsi Ri Szo Heh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901013883, empty load weight: 8,840 kg, maximum load weight: 30,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 05/2027, loading space length: 13,650 mm, loading space height: 2,890 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 235/75 R17,5", color: blue, 3 vehicles in production Please note: the images are archive photos. The vehicle may be in use. #Chassis – Semi-Trailer for Haulage - Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin - Outer frame with "Load Lock" profile for lashing straps - 13 additional pairs of lashing rings recessed into outer frame, 5 t each - 24 t 2-speed landing legs, single-side operation, half-round foot, straight mounting plate, sliding foot compensation, min. swivel clearance 2,220 mm - "Heavy Blocker 2.0" rear cross impact protection - Heavy-duty pallet stop, bolted both sides, ca. 15–20 mm high, lashing points ca. every 380 mm - Lifting table to gooseneck, ca. 3,000 mm long, hydraulically raised for driving onto gooseneck - Hydraulic lifting table with own electric power pack, in aluminium box with stainless steel door, right side (direction of travel) - 2 x 12V batteries with bracket and battery box, charging cable front to rear, 7-pin charging socket at front #Axles & Suspension - Laser-measured axles/chassis, reducing tyre wear and fuel consumption - Rear axle self-steering, automatic reverse lock via reversing light, additional manual lock switch on vehicle - Air suspension with raise & lower valve plus auto-reset function - Max. rear ramp/loading height with air suspension lowered ca. 1,050 mm #Wheels & Tyres - 235/75 R 17.5", steel wheels in twin arrangement #Braking System - 2-line compressed air braking system - Spring-loaded parking brake - Vehicle stability system - Trailer info centre, displays data such as axle load and mileage - Axle load detection via EBS CAN-bus signal, shown on cab display - 2 mismatch-proof coupling heads at front - EBS electronic braking system with EBS socket at front - Tyre pressure monitoring system (TPMS) per ECE R 141, shown on tractor display via EBS Guodpfez Ahxdjx Ah Hoh #Electrics - 24V, LED multi-chamber lights, flashing side lights - 2 white LED position lights at front - 2 white/red LED outline marker lights at rear - 2 additional LED work lights at rear - LED work lights on both sides - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front #Front Wall / Front Corner Posts - Front wall lined internally to ca. 2,500 mm height, ca. 30 mm thick plywood panel #Centre Posts - 3 pairs of sliding posts, adjustable along full length, 4 insertion pockets, long pocket at bottom - 3 pairs of post positions #Slats - 5 rows of wooden slats - 4 pairs of variable steel slats, combined with variable beams for front/rear load securing; slats omitted where steel slats fitted, at rear in the well - 4 variable beams, only combined with variable steel slats, for front/rear load securing #Roof - Fliegl-Blitz-Verdeck - Sliding roof, rear end-lift folds up, roof slides rear to front, L-shaped roof rail for automotive industry, internal width between roof rails ca. 2,490 mm - EcoLift – roof lifting mechanism, raised ca. 380 mm, both sides, gas strut support #Registration Country / Plates - With DEKRA inspection and certificate (per §13 EC-FGV) - Fliegl manufacturer's certificate for body strength per EN 12642 XL - Fliegl manufacturer's certificate for body strength per DL 9.5, pallet stop both sides, ca. 20 mm high, loading height reduced by ca. 20 mm - Warning panel per ECE-70

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Gsdsz Rlttspfx Ah Hjuh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, Year of construction: 2026, #Plateau semi-trailer Mega - Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification #Chassis – general haulage semi-trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Reinforced frame for high payload, also suitable for vehicle transport - Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment - 10 pairs of lashing points recessed top/outside in outer frame, 10 t each - Foldable rear support legs - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel underrun protection - Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle - 1 spare wheel holder for 1 spare wheel, with wheel fixing set - 2 lockable plastic toolboxes, W=600/H=425/D=460 mm - Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock - 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal - 10 stake pockets recessed centrally in floor, 70x40 mm internal - 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes #Arrangement - Stake pocket positions 2 and 4 per Fliegl data sheet - 20 plug-in stakes, hot-dip galvanised - Storage space for aluminium loading ramps, ramps slide in from the rear - 3 pairs of folding lashing eyes, 10 t, in outer frame #Axles & suspension - SAF disc-brake axles, air suspension - Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times #Braking system - 2-line air braking system, colour-coded lines for easy servicing - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, no connecting line - EBS with front EBS socket, no connecting cable - Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height) - Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm - Trailer stability system #Wheels & tyres - 435/50 R19.5 steel wheels Gujdpfx Aozwn Izjh Hsh #Electrics - 24 V, multi-chamber lights - Yellow LED side marker lights - 2 white LED front position lights - 2 white/red outline marker lights at rear - 2x 7-pin and 1x 15-pin anti-mismatch sockets at front - LED work lights at sides, 1x left and 1x right (direction of travel) - 2 additional LED work lights at rear - 1 beacon with holder, switched via side lights - 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm - Additional 7-pin socket in underrun protection #Floor - Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 25 mm aluminium hollow profile, 1,350 mm high - Solid steel corner posts (closed, heavy-duty version) - Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker") - Steel impact protection at approx. 140 mm height on lower interior - Internal storage compartment for plug-in stakes

Condition: used, machine/vehicle number: WFDFLT33802019846, first registration: 01/2020, tire size: 385/55 R22.5, axle configuration: 3 axles, color: other, suspension: air, total length: 12,250 mm, total width: 2,500 mm, total height: 1,350 mm, Year of construction: 2020, Chassis Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Disc brake: ✓ Structure Dish height: 120 cm Container construction: 2 x 20 ft, 40 ft, 45 ft Tank Fuel: ✓ 3-axle container trailer, Suitable for 2 x 20 ft. 1 x 40 ft or 1 x 45 ft, ABS, BPW axles, Air suspension 1st and 2nd axle lift axle, Disc brakes, Shipment dimensions 1225x250x135 cm = More information = Axle configuration Tyre size: 385/55 R22.5 Make axles: Bpw Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Tyre profile left: 35%; Tyre profile right: 35% Axle 2: Tyre profile left: 55%; Tyre profile right: 55% Axle 3: Lift axle; Tyre profile left: 70%; Tyre profile right: 70% Gjdpfx Ahou H E Rye Hjuh Weights Empty weight: 5.080 kg Carrying capacity: 32.920 kg GVW: 38.000 kg Identification Registration number: C535239 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, Year of construction: 2016, color: white, overall weight: 16,000 kg, empty load weight: 2,600 kg, loading space volume: 44.8 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,480 mm, Interchangeable platform body, sliding tarpaulin, BDF system, 7,450 mm long, PAINT + TARPAULIN NEW! Used and refurbished interchangeable platform body with sliding tarpaulin, BDF system, 7,450 mm long. High portal doors at the rear with internal rotating bar locks. Our services: * New paint in RAL 9010 white * New side tarpaulins in RAL 9010 white * New roof tarpaulin in white Guedpfsz Ek Eiex Ah Hjh * Undercarriage sandblasted, primed, and painted in white * Factory-new telescopic support legs in RAL 9005 black * New galvanized pull-out ladder * UVV functional test certificate * Air Pipe air cushion to protect against water and dust All specified values are approximate dimensions in mm and kg. Delivery date upon request. Delivery possible. The offer is subject to change; prior sale reserved. Prices are net, ex works D-59558 Lippstadt-Rixbeck. You can find more items at lippstä.

Condition: new, empty load weight: 8,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, total length: 13,300 mm, suspension: air, tire size: 235/75R17,5, color: red, Year of construction: 2026, Equipment: ABS, 3-axle low-loader semi-trailer with 2-piece steel ramps, hydraulic. Extendable width up to 3000 mm, gooseneck with 320 mm ALU side walls. 3rd axle with self-steering and reverse lock. Wooden floor, 70 mm thick. Gusdpfoyxfndsx Ah Hoh

Condition: used, maximum load weight: 6,945 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2012, loading space length: 7,300 mm, loading space width: 2,468 mm, loading space height: 2,814 mm, total length: 9,250 mm, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, Drum brakes, sliding tarpaulin, double doors, BPW axles, wooden floor, refrigerated vehicle. Trailer No. 3430, ABS, BPW axles, drum brakes, unladen weight: 3,555 kg, payload: 6,945 kg, gross weight: 10,500 kg, tire size 235/75 R 17.5, height-adjustable drawbar, spare wheel, wooden loading floor, sliding tarpaulin, cargo space dimensions L x W x H: 7,300 x 2,468 x 2,814 mm, first owner, errors and prior sale excepted. Gedszwzbnopfx Ah Heuh

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Lift Axle - Steering axle = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Rear axle 2: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Gjdpez Dgq Sefx Ah Houh - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.