Tipper

Fliegl DHKS 390 -25 m³

Condition: new, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total width: 2,550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000kg / 39,000kg Tare weight: 5,500kg!!! Payload: 29,500kg / 33,500kg Overall length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Fifth wheel height approx. 1,200mm Chassis Semi-Trailer Tipper: - Fine-grain steel welded construction, in basic lightweight design - 1x central landing gear leg - Retractable underrun protection - Underrun protection with “spring assist” for easier operation - Half-shell mudguards - Integrated "mudguard bracket" with stone-repellent surface - With anti-spray mudflaps only on the last axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - "Axle/chassis laser alignment" for reduced tire wear and lower fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted at the front on curved chassis - 1st axle with automatic lift axle, additionally controllable electrically from the truck, including forced lowering and start-up aid, no truck installation required (Start-up aid function up to 30% axle overload and up to a speed of max. 25 km/h) Braking System: - 2-line compressed air braking system Color-coded line routing for easier service. - Spring-loaded parking brake - 2 foolproof coupling heads at the front, without connecting line - 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable - With lift & lower valve - Vehicle stability control system - Automatic tipping lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5” European brand, manufacturer’s choice Electrics: - 24 Volt, multi-chamber LED lights, side yellow LED lighting, LED license plate lighting (Note: Some towing vehicles may display fault codes despite full functionality) - Side yellow LED lighting linked to indicator "flashing side marker lights" - Premium LED side marker lights, each with 20 LEDs per light - 2 white front position lights, LED included - 2 white/red lane position lights at the rear, LED included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable - LED work lights both sides (switched via reversing light) - 2 additional LED work lights, recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed section, NW 48 mm - Manufacturer Hyva - Operation hydraulic via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round tipper body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Interior with access at front wall. - Greenline – conical and aerodynamic body design - External shovel and broom holder at front wall - "Membrane" rear wall - Rear wall as pendulum tailgate with "double joint hinge", external, with dual hook locking. 2 clamping screws with toggle locks at lower side Lhsdpevhyf Rsfx Akkon - Rear wall with rubber seal Note: Heat resistant up to max. 170°C! - Side walls continuously 4 mm thick, floor 4/5 mm thick, wear and weight-optimized construction - Fliegl S.T.E.P. – swiveling standing platform at the front with foldable access ladder for side entry front left

Condition: new, Multiple locations available, nationwide delivery is no problem. External / Internal Dimensions Length: 12,192 mm / 12,029 mm Width: 2,438 mm / 2,350 mm Lhodpfxox Tqt Ij Akkon Height: 2,591 mm / 2,380 mm Door Dimensions Width: 2,340 mm Height: 2,276 mm Weight Chart Empty weight: 3,780 kg Gross weight: 30,480 kg Pallet spaces: 24 units Volume: 67.7 m³ All dimensions are non-binding. Values may vary. The 40-foot standard container is universally applicable and is one of the best-selling freight containers worldwide. It is usually manufactured from steel and additionally painted on the outside to minimize weather damage. Thanks to its stability and mobility, it is indispensable in the logistics sector. Whether as a transport unit, office or storage space, hobby room, or for moving purposes. The container can be easily mobilized and transported by land, sea, or air from point A to point B. No reloading of goods is required, as the container with its contents can be moved directly. The High Cube variant is one foot higher and therefore 30 centimeters taller. I look forward to hearing from you! Ashkan Amir Nasri

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,520 mm, Year of construction: 2026, Scope of delivery: 1x Martz rear tipper trailer with steel floor and hand pump, 253x152 cm, 2000 kg Description: The Martz rear tipper trailer with hand pump is a robust transport solution for construction sites, gardening, and agriculture. Tipping, durable, and highly versatile. With a loading area of 253x152 cm and a total weight of 2000 kg, this trailer offers maximum flexibility and load capacity. The rugged welded construction made from hot-dip galvanized steel ensures longevity and stability. Features: Lhsdpfexmi Insx Akksn - Tipping system: Equipped with a hand pump. - Versatility: All side panels are fully openable and removable, transforming the trailer into a flatbed trailer. - Robust design: Welded steel frame and aluminium side panels for high stability. - Twin axle: Designed for extreme loads and stability when transporting heavy goods. - Lashing rings: Integrated and recessed in the loading area. Technical data: - V-drawbar - Overrun brake - Wheel chocks with holder - Rubber suspension axle from Knott or Al-Ko - Hand pump Number of axles: 2 Tiltable: Yes Gross weight: 2000 kg Load area length: 2530 mm Load area width: 1520 mm Overall width: 1640 mm Overall length: 3910 mm Overall height: 1100 mm Side panel height: 300 mm Unladen weight: 468 kg Payload: 1532 kg Side panel material: Aluminium Frame material: Steel Floor material: Steel Experience the versatility and reliability of the Martz rear tipper trailer – your partner for demanding transport requirements!

Condition: used, mileage: 478,000 km, power: 478 kW (649.90 HP), first registration: 01/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania S650 4x2 tractor unit * Euro 6 * Automatic transmission * Retarder * S-Line cab * 2 sleeping berths Lhjdsx Ipdzepfx Akken * Power take-off (PTO) * Hydraulic tipping system * Fully spoilered * Frame cladding * Parking air conditioner * Automatic climate control * Parking heater * Refrigerator compartment * Heated seats * Navigation system * Single-family home

Condition: used, maximum load weight: 15,730 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2021, next inspection (TÜV): 10/2028, Year of construction: 2021, Internal vehicle number: G300385 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Ledpfx Ajxnuk Rskkjhn * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,270 kg Loading area: 5,500 mm Drum brakes Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Lhsdpoi Ri A Iefx Akkon Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: used, mileage: 529,640 km, power: 353 kW (479.95 HP), first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, crane, parking heater, TGS 26.480 6x4 crane KESLA 2124 with winch, aluminum rims, tires approx. 60% Lhodpfx Akjv Ut Tuskjn

Condition: used, Year of construction: 2023, Annaburger HTS 29G.14 EcoLiner dump truck Alliance 650/55 R26.5 tires / Lsdpfx Akjtvf U Nekjhn

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear Ledpfxewhfiyo Akkjhn --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: new, axle configuration: 3 axles, suspension: air, color: other, Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Steerable; tire tread depth left: 100 mm; tire tread depth right: 100 mm Rear axle 2: Steerable; tire tread depth left: 100 mm; tire tread depth right: 100 mm Rear axle 3: Steerable; tire tread depth left: 100 mm; tire tread depth right: 100 mm Damage: None Lhjdszx Sk Nopfx Akkjn