Used Fliegl Dts Trailers for sale (297)

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfodpjyudngsfx Ah Hod

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Hfodsi Ri Rvjpfx Ah Hod Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: new, machine/vehicle number: 2dff0c136c85096f36822a0bb, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Hfedpfxoi Riy Ej Ah Hod Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points each 10 to integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation axle load compensation (rocker compensation) Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake Incl. 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 8,200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Incl. with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Hodpfsi Ri Rysx Ah Hsfd Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco, Knorr or Haldex Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of registration / plates Hfjdpfx Ahei Ri Dle Hjd Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Hfodpfxoi Ri Ddj Ah Hjd Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: f8fb99947a1c19bc4d63549ff, empty load weight: 6 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 7 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion with M&S marking Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood Hsdpfx Ahei Riwfs Hofd with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Coun

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tire size: 235/75 R17.5. Axles: 1st axle: , 2nd axle: , 3rd axle: , leaf suspension. Weights: Immediate registration technically possible Gross weight: 24,000 kg / 30,000 kg Hfedpsx Nrp Nsfx Ah Hod Payload approx.: 17,400 kg / 23,400 kg Unladen weight approx.: 6,600 kg +/- construction tolerance Dimensions approx.: Overall length: 10,900 mm Overall width: 2,550 mm Gooseneck length: 2,180 mm Low-bed loading platform length incl. rear incline: 6,500 mm Rear incline length: 950 mm Frame width: 2,520 mm Loaded loading height in low-bed: 860 mm Coupling height: 900 mm Drawbar length: 1,900 mm Equipment: - Extendable widenings up to 3,000 mm (not in rear incline) incl. wooden planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tires 235/75 R17.5 - Storage box recessed in the transition slope to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, wooden-covered - Ramps with spring lift assistance - Frame hot-dip galvanized Errors and changes excepted.

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, From ongoing production Total weight: 24,000kg/ 30,000kg Empty weight: 6,100kg Payload: 17,900kg/ 23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear mud flaps across the entire width (not in conjunction with forklift bracket) Half-shell mudguard 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles Plastic tool box Extendable extensions to 3,000mm Hodpfsuytx Sox Ah Hofd Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on the offset, 10 tons each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms embedded in the outer frame at the top and side, each with 10 tons 1 x at the front on the crank, 6 x in the low bed Pair of ring lashing eyes embedded in the outer frame, each with 5 tons (can be converted to stake pockets) Pair of additional folding lashing eyes, each with 10 tons 1 x on the crank 1 x embedded in the floor behind the last axle Trailer towing device, turntable Draw fork with tested 40 mm drawbar eye Draw fork height adjustment via spring Axles + suspension Drum brake axles, at the manufacturer's discretion "Axles/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's choice steel rims in twin arrangement, factory silver brake system 2-line compressed air brake system spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable electrics 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, LED rotating beacon with holder, switched via parking light (light removable) pair of warning signs with double LED lighting and extendable to 3,000mm floor front bend with steel/checker plate covering storage box embedded in the crossing slope to the bend then with approx. 70mm softwood floor, in the wheel arch area steel/checker plate covering rear bevel with 70mm softwood floor Low loading area including rear bevel 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, can be moved sideways Additional ramp lock foldable at the bottom (to prevent the ramps from slipping sideways, not in conjunction with lateral hydraulic ramp shifting) Covered with wood (tip area with steel/checker plate) Hydraulic via tractor auxiliary drive with throttle, actuation on the side in FR left Hydraulic connection with SVK plug NW 10/3, including connecting hose Paintwork Frame hot-dip galvanized including passivation Loading ramps hot-dip galvanized Plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, maximum load weight: 23,920 kg, overall weight: 30,000 kg, axle configuration: 3 axles, NEW VEHICLE Fliegl 3 axle low loader type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,920 kg / 23,920 kg Empty weight 6,080 kg Total length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm including 900 mm approach slope Parabolic suspension Long ramps 2,800 mm with hydraulic operation Wider widths to 3,000 mm with warning signs and rotating beacon Large lashing package with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Towing eye 40 mm Hfedpfx Aexb Nmysh Hod Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 €/ Net Rent-to-own offer: term 48 months, residual value 40%, down payment only VAT. Monthly rate: EUR 500.00

Condition: new, maximum load weight: 23,890 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Vehicle from ongoing production NEW VEHICLE Fliegl 3 axle low loader type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,890 kg / 23,890 kg Empty weight 6,080 kg Total length 10,900 mm Loading length 8,680 mm Hfodsk N Adkjpfx Ah Hed Loading bed 6,500 mm including 900 mm approach slope Loading height 860 mm Air suspension with lifting and lowering valve Long ramps 2,800 mm with hydraulic actuation Wider extensions to 3,000 mm with warning signs and rotating beacon Large lashing package with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Towing eye 40 mm Plus pre-freight / provision from Storage space Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT monthly rate: EUR 609.00

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, New vehicle Fliegl 3 axle low loader trailer with ramps, type DTS 300 Vehicle completely hot-dip galvanized Total weight: 24,000kg/30,000kg Empty weight: 6,100kg Payload: 17,900/23,900kg Total length: 10,890mm Hsdpov D T R Esfx Ah Hofd Loading length: 8,670mm total, 6,500mm low bed including rear bevel / 2,170mm offset Width: 2,520mm Loading height: 860mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate: EUR 569.00 Steel Welded construction Pivot bolster with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Splash flaps at the rear over the entire width (not in conjunction with forklift bracket) Half-shell mudguard on 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tonnes each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes set into the outer frame, each with 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the ground behind the last axle Towbar with tested 40 mm towbar Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and tear Fuel consumption Air suspension with raising and lowering valve Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS-Canbus signal, for display on display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 interchangeable coupling heads at the front, with connecting cables to the motor vehicle, 24 volt EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000 mm Floor Front bend with steel/checker plate covering Storage box embedded in the crossing slope to the bend then with approx. 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear bev

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Total length: 10,890 mm Loading length: 8,670 mm total, 2,170 mm offset, 6,500 mm loading bed Width: 2,520 mm Loading height: 860 mm Further information Plus pre-freight / Delivery from storage location 26639 Wiesmoor €1,280.00 / net Low-loader trailer chassis Steel welded construction Turntable with robust ball-bearing slewing ring Foldable rear support 2 wheel chocks with bracket Aluminum side protection Full-width rear mud flaps (not in conjunction with forklift bracket) Quarter-shell mudguards in front of the first axle Anti-spray mud flaps behind 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extension extensions extendable to 3,000 mm (not in the rear slope) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area 70 mm wooden planks for extension to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts recessed into the front longitudinal member on the offset, 10 tons each 4 pairs of lashing holes in the outer frame of the offset, each with a capacity of 5 tons (for tensioning strap attachment) 7 pairs of lashing pins, embedded in the outer frame at the top and sides, each with a capacity of 10 tons 1 x at the front on the offset 6 x in the lowbed First lashing eye 250 mm from the front and last max. 250 mm from the rear, spacing between the lashing eyes no greater than 1100 mm 5 pairs of ring lashing eyes embedded in the outer frame, each with a capacity of 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with a capacity of 10 tons 1 x on the offset (projects over) 1 x embedded in the floor behind the last axle Trailer towing device: turntable Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles + suspension Drum brake axles, at the manufacturer's discretion "Laser-measured axle/chassis" Reduces tire wear and tear Fuel Consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and Tires Hsdpowm Uyxofx Ah Hjfd 235/75 R 17.5" Manufacturer's choice Twin steel rims, factory silver Braking System Two-line compressed air braking system Spring-loaded parking brake Two interchangeable coupling heads at the front, with connecting cables to the towing vehicle 24-volt ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24-volt, multi-chamber lights, yellow LED side lighting Two white position lights at the front Two white/red lane departure lights at the rear Two 7-pin interchangeable connectors at the front, with connecting cable One LED rotating beacon with bracket, connected via the parking light (removable light) Two pairs of warning signs with double LED lighting Extendable to 3,000 mm Floor Front ramp with steel/checker plate flooring Storage box recessed into the ramp ramp slope Furthermore, with approx. 70 mm softwood flooring, steel/checker plate flooring in the wheel arch area Rear ramp slope with 70 mm softwood flooring Low-loading area including rear ramp slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Additional ramp lock, foldable at the bottom (prevents the ramps from s

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Total length: 10,890 mm Loading length: 8,670 mm total, 2,170 mm offset, 6,500 mm loading bed Width: 2,520 mm Loading height: 860 mm Further information Plus pre-freight / Delivery from storage location 26639 Wiesmoor €1,280.00 / net Low-loader trailer chassis Steel welded construction Turntable with robust ball-bearing slewing ring Foldable rear support 2 wheel chocks with bracket Aluminum side protection Hsdpfxewlmrqs Ah Hefd Full-width rear mud flaps (not in conjunction with forklift bracket) Quarter-shell mudguards in front of the first axle Anti-spray mud flaps behind 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extension extensions extendable to 3,000 mm (not in the rear slope) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area 70 mm wooden planks for extension to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts recessed into the front longitudinal member on the offset, 10 tons each 4 pairs of lashing holes in the outer frame of the offset, each with a capacity of 5 tons (tension strap attachment) 7 pairs of lashing pins, embedded in the outer frame at the top and sides, each with a capacity of 10 tons 1 x at the front on the offset 6 x in the lowbed First lashing eye 250 mm from the front and last max. 250 mm from the rear, spacing between the lashing eyes no greater than 1100 mm 5 pairs of ring lashing eyes embedded in the outer frame, each with a capacity of 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with a capacity of 10 tons 1 x on the offset (projects over) 1 x embedded in the floor behind the last axle Trailer drawbar coupling Drawbar with tested 40 mm drawbar eye Drawbar height adjustment via spring Axles + suspension BPW drum brake axles "Laser-measured axle/chassis" Reduced tire wear and tear Fuel Consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" Manufacturer's choice Twin steel rims, factory silver Braking System Two-line compressed air braking system Spring-loaded parking brake Two interchangeable coupling heads at the front, with connecting cables to the towing vehicle 24-volt ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24-volt, multi-chamber lights, yellow LED side lighting Two white position lights at the front Two white/red lane departure lights at the rear Two 7-pin interchangeable connectors at the front, with connecting cable One LED rotating beacon with bracket, connected via the parking light (removable light) Two pairs of warning signs with double LED lighting Extendable to 3,000 mm Floor Front ramp with steel/checker plate flooring Storage box recessed into the ramp ramp slope Furthermore, with approx. 70 mm softwood flooring, steel/checker plate flooring in the wheel arch area Rear ramp slope with 70 mm softwood flooring Low-loading area including rear ramp slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Additional ramp lock, foldable at the bottom (prevents the ramps from slipping sideways, not in conjunction with la

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Total length: 10,890 mm Loading length: 8,670 mm total, 2,170 mm offset, 6,500 mm loading bed Width: 2,520 mm Loading height: 860 mm Further information Plus pre-freight / Delivery from storage location 26639 Wiesmoor €1,280.00 / net Low-loader trailer chassis Steel welded construction Turntable with robust ball-bearing slewing ring Foldable rear support 2 wheel chocks with bracket Aluminum side protection Full-width rear mud flaps (not in conjunction with forklift bracket) Quarter-shell mudguards in front of the first axle Anti-spray mud flaps behind 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extension extensions extendable to 3,000 mm (not in the rear slope) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area 70 mm wooden planks for extension to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts recessed into the front longitudinal member on the offset, 10 tons each 4 pairs of lashing holes in the outer frame of the offset, each with a capacity of 5 tons (tension strap attachment) Hfsdpfx Ahswlmr Ro Hod 7 pairs of lashing pins, embedded in the outer frame at the top and sides, each with a capacity of 10 tons 1 x at the front on the offset 6 x in the lowbed First lashing eye 250 mm from the front and last max. 250 mm from the rear, spacing between the lashing eyes no greater than 1100 mm 5 pairs of ring lashing eyes embedded in the outer frame, each with a capacity of 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with a capacity of 10 tons 1 x on the offset (projects over) 1 x embedded in the floor behind the last axle Trailer drawbar coupling Drawbar with tested 40 mm drawbar eye Drawbar height adjustment via spring Axles + suspension BPW drum brake axles "Laser-measured axle/chassis" Reduced tire wear and tear Fuel Consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" Manufacturer's choice Twin steel rims, factory silver Braking System Two-line compressed air braking system Spring-loaded parking brake Two interchangeable coupling heads at the front, with connecting cables to the towing vehicle 24-volt ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24-volt, multi-chamber lights, yellow LED side lighting Two white position lights at the front Two white/red lane departure lights at the rear Two 7-pin interchangeable connectors at the front, with connecting cable One LED rotating beacon with bracket, connected via the parking light (removable light) Two pairs of warning signs with double LED lighting Extendable to 3,000 mm Floor Front ramp with steel/checker plate flooring Storage box recessed into the ramp ramp slope Furthermore, with approx. 70 mm softwood flooring, steel/checker plate flooring in the wheel arch area Rear ramp slope with 70 mm softwood flooring Low-loading area including rear ramp slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Additional ramp lock, foldable at the bottom (prevents the ramps from slipping sideways, not in conjunction with la

Condition: new, empty load weight: 6,060 kg, maximum load weight: 17,940 kg, overall weight: 24,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, 2-part loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Body: Loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Hedjxbttqjpfx Ah Hjfd Parabolic suspension with axle compensation at the rear, 3x 10t SAF axles, permissible gross weight up to 30t, drawbar adjustable in length. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Hodpfx Ahotcwkre Hofd

Condition: new, empty load weight: 6,650 kg, maximum load weight: 17,350 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6650kg, permissible total weight: 24000kg, tire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, - steel welded construction - bogie with strong ball bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - without spare wheel, - 1 plastic tool box, with shelf, w620/h360/d440mm, lockable with padlock - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks below the low loading area - wooden planks 70mm for extension to 3000mm - 1 pair of ring lashing eyes embedded in the front on the crank, 5 tons each - 7 pairs of lashing mushrooms embedded in the top and sides of the outer frame, 10 tons each - 1 x at the front on Crank, 6 x in the low bed - 5 pairs of stake pockets embedded in the outer frame, inside 70x40 mm - 2 pairs of additional folding lashing eyes, 10 ton each, 1x at the front on the crank, 1x behind the 3rd axle - Drawbar with 40 mm towing eye, and 8 inclined towing eyes - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) - 235/75 R17.5 - steel rims in twin arrangement, factory silver - 2-line compressed air brake system - spring-loaded parking brake ABS and ALB, with plug at the front, with connecting cable - 24 volt, multi-chamber lights, yellow LED lighting on the side - 2 x 7-pin, non-interchangeable plugs at the front, with connecting cable - 1 LED rotating beacon with holder, switched via parking light (light can be removed) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm - front bend with steel/checker plate covering - storage box embedded in the crossing slope to the bend - then with 70 mm softwood floor, in the wheel arch area steel/checker plate covering - rear bevel with 70 mm softwood floor - low loading area including rear bevel 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - additional ramp safety Hfsdpfx Ajt Szcboh Hsd

Condition: used, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift roof = Remarks = Number of axles: 3, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2024, Lift roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab type: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tyre tread: 12 mm; Right tyre tread: 11 mm Axle 2: Left tyre tread: 12 mm; Right tyre tread: 12 mm Hedpoyupdysfx Ah Hofd Axle 3: Left tyre tread: 12 mm; Right tyre tread: 11 mm Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition General condition: Very poor Technical condition: Very poor Optical condition: Very poor Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Competitive pricing • Professional business conduct • Multilingual staff • Customer understanding • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask us directly about our European warranty package.

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Hjdpfx Ahjyt D Uqs Hofd

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hedpfx Aheyt D S Aj Hsfd

Condition: used, empty load weight: 7,375 kg, maximum load weight: 27,625 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2012, loading space length: 13,650 mm, suspension: air, tire size: 385/65R22,5 160J, color: other, gearing type: other, front tire size: 385/65R22,5 160J, rear tire size: 385/65R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, Stake pockets, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Hfjdpfx Aoyth D Aeh Hod

Condition: used, maximum load weight: 28,070 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 09/2026, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 2,990 mm, loading space volume: 102 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, FLIEGL SDS 350 MegaRunner RH 95, low fifth-wheel height - ranging from 930 mm to 950 mm, platform-curtain side body with side sliding tarpaulins, sliding roof, double-wing rear doors with rotating rod lock, rear mounting for forklift truck, EN 12642 Code XL load certificate, screen-printed floor, continuous lashing holes in external frame, 13 lashing rings per side, galvanized chassis, SAF landing gears, SAF axle(s), ABS, EBS, disc brake system, lift axle, air suspension with lifting/lowering feature, the vehicle may have advertising stickers and/or lettering. Hfedpfx Asyrwirjh Hsd SI86658 Our offer generally excludes a new roadworthiness (TÜV) certificate. If a new TÜV certificate is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly provide you with a financing or leasing offer for this item. Please do not hesitate to contact us!

Condition: used, axle configuration: 3 axles, first registration: 05/2015, loading space volume: 55 m³, total length: 10,800 mm, total width: 2,550 mm, total height: 3,700 mm, color: red, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Central lubrication - EBS - Lifting axle - Tool box = More information = Weights Empty weight: 6.060 kg Carrying capacity: 31.940 kg GVW: 38.000 kg Functional Make of bodywork: Fliegl Tipper: Back Financial information Selling price: € 19.999, US$ 22.950 Other information Brake type on axle 1: disc Make of axle 1: SAF Suspension on axle 1: air Brake type on axle 2: disc Make of axle 2: SAF Suspension on axle 2: air Brake type on axle 3: disc Make of axle 3: SAF Hodpfx Aoyuyrzsh Hjfd Suspension on axle 3: air Brake type on axle rear: disc Make of axle rear: SAF Suspension on axle rear: air Technical inspection expiration date: 2026 Body model: Alumulde Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Hjdpsypww Defx Ah Hsfd